Deploying the FEP client (SCCM 2012 R2) on computers that already have the FEP client from a previouse failed site installation

Hello All
I am in the process of rebuilding our SCCM 2012 R2 site server (single site). The FEP client from the previous sccm 2012 r2 deployment was successfully installed on all of our endpoints and communicating with no issue with the site server. Since losing that
server we are in the process of deploying a one. My question is, when I configure FEP and the site server attemtps to deploy the FEP client will the current one be reinstalled even though its same version? Or will SCCM just recognize there is already
a compatible client installed. I asked a similar question about the SCCM client in another post which was very helpful.
Any advice would be greatly appreciated
Phillip
http://social.technet.microsoft.com/Forums/en-US/84923512-b456-4850-b2ba-8d22bb54ab5c/deploying-sccm-2012-r2-clients-to-computers-that-already-have-the-sccm-2012-r2-client-from-failed?forum=configmanagerdeployment#ab630267-6f25-45ff-a732-231b8008876c
Phil Balderos

No, the Endpoint Protection client is still a separate client. By, enabling the client settings the ConfigMgr client will make sure that the Endpoint Protection client is installed and makes sure it will be 'managed'. After re-installing the ConfigMgr
client, the ConfigMgr client will see that Endpoint Protection is already installed and the new ConfigMgr client will start 'managing' the Endpoint Protection client.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Downloaded Firefox 4.0, followed all directions. When checking the version the icon in the Applications folder to see that the new one is in, it still says that I have the 3.5.18. What am I doing wrong?

I have a Macbook 2008, Mac OS X, version 10.5.8, processor 2 Ghz Intel Core 2 Duo, Memory 2 GB 1067 MHz DDR3.
I downloaded Firefox 4.0 as prompted two times on different days and the same thing occurred.

Firefox 3.6.16 has a newer build and release date than Firefox 4.0 does.

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

SCCM 2012 R2 MP Registation log error "Rejecting the registration request because Agent Type is ISV Proxy (4). This Agent Type is no longer supported."

Any idea what this message is trying to tell me? ISV Proxy Client Registrations ad worked fine in SCCM 2012 prior to R2. This message in the title is present in MP_RegistrationManager.log. The ISV Proxy Certificate lists as "unblocked".
If this is true, then that was a pretty sleathy move to remove this support.
BAE

Hi BEnsinger,
You should set your proxy agent type = 8. Everything should work correctly if you do. The change wasn't intended to be a "stealthy" move.
This was originally documented in in ConfigMgr 2007 and remains the same in ConfigMgr 2012:
http://msdn.microsoft.com/en-us/library/cc146744.aspx
The error text may be a little odd - but I'm assuming you're actually registering a client, and according to the SDK docs, you should be using type = 8.
Dave Randall [MSFT]
- Dave

How to deploy .msp files through SCCM 2012

Team,
Can you please help me to deploy .msp files through SCCM 2012?
Regards,
Mahadev Nitture

I tried to search and got few things but didn't understand to proceed with.
Please help me with this.
Regards,
Mahadev Nitture
You can use a typical/standard application deployment method (just a minor change because of MSPfile).
Here are some guides, for typical application deployment:
http://technet.microsoft.com/en-us/library/gg682159.aspx
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_7075.html
Familiarise yourself with these methods, then return to the example suggested by Torsten for specific steps for MSP:
https://social.technet.microsoft.com/Forums/en-US/3dac27fd-ce4f-4d3d-946b-d08d4c7f5af5/best-way-to-deploy-an-msp?forum=configmanagerapps
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Not liking Deployment Status Monitoring in SCCM 2012 - Not enough detail

I know SCCM 2012 has made some fantastic changes to offering tools for deploying packages. I am using and learning a lot about deploying apps using the new features of SCCM 2012 Application Management. I still have a few apps that I need to deploy
the old way using Packages. With the old way, I liked using task sequences and conditions with WMI Queries. One item I found out quickly is that I am having issues with SCCM 2012 recognizing some name spaces such as root\cimv2\sms. I am still
researching why. The other item is reporting of advertisements or what SCCM 2012 now calls Deployments. I am unable to find a way to get more detailed reporting on deployments that I had with SCCM 2007 using the right click tools and advertisement
reports. The details of these reports in SCCM 2007 was really good and I was able to troubleshoot each step of a task sequence. All I can find with SCCM 2012 is a simple description that says the "Program completed with success" or the program
failed. Is there a way to easily get more detailed reports much like I had with SCCM 2007? I know I am missing something really simple. Any insight would be much appreciated.
Thanks
BJ

It's an old thread and all, but I'd like to add to the last post.
Pellewall has 400 application type deployments - I feel bad for him. We've converted almost all of ours into packages, because application deployment doesn't Work as reliably as packages. We can't get applications to install in task sequences, and sometimes
simple installs fail for wierd reasons when deployed as application, but perform fine using the same install string as a package launched thru cmd (both as system user).
We've been using sccm 2012 for 1½ years now roughly, and I'd discourage anyone from making application type programs if they don't want a headache.
As for reporting - the builtin reports need to be modified to become useful, but they're a nice extra to have. I find the old reporting system in 2007 was much simpler and faster than srs though, but that might just be my opinion.
As times change, so do people.

Any major changes to the database for SCCM 2012 and Reporting?

I'm in the process of migrating my custom reports from SCCM 2007 to SCCM 2012. I wonder if all the tables / views in SCCM 2007 are the same in SCCM 2012 for my reporting purposes? So far everything I've migrated over appears to work without a problem.
Orange County District Attorney

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
The SQL schema for SCCM 2012 has been released here.
https://technet.microsoft.com/en-us/library/dn581978.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

A question regarding the 70-243 SCCM 2012 Exam

Hi All,
I have a query with respect to the 70-243 SCCM 2012 Exam. I would like to know the below points.
1. What is the passing marks for this exam ?
2. How many questions are asked ?
3. What is the time duration for an individual to answer these questions ?
4. Does additional answers like in the below situation be considered as correct or wrong.
A Question has 2 answers. the Answer is A,B.
I check saying A,B & C are correct. Now as A & B are correct and i have marked c as well, will that be considered as correct answer or as a wrong answer ?
Has any one taken the exam recently who can answer my question ? And are the same followed in all the countries as i am from India so.
Gautam.75801

The pass mark is 700 out of 1000
Microsoft does not release the number of questions in an exam. You should expect around 55 to 65 questions though
The exam duration is 2.5hrs
That answer would be considered wrong.
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSA, MCSE: BI
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Now that I have the Media server and 3 media client boxes, all

Now that I have the Media server and 3 media client boxes, all the individual lists of schedules are gone.
Is there any way to keep the seperate lists on the client boxes?
Solved!
Go to Solution.

No because the VMS is where are all the recordings are done.
Client boxes use the tuners of the VMS.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

I just updated my iTunes and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

I just updated my iTunes on 12-7-2012 and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How can i confirm that i have the grid control ?

Hi,
I have oracle 10g database , we have dbconsole. But i don't know wherther we have the grid control or not ??? how can i check that ??
And one more thing , i have the oracle 817 databases , in need to register that database into the GRID . Can any one send me the proper doc. for 817 to install into grid control db.
$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://prodgv1:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in

I have oracle 10g database , we have dbconsole. But i
don't know wherther we have the grid control or not
??? how can i check that ?? What are you looking for exactly? What does "do we have the grid control" mean?
Did you download and install this?
A "default" install comes with three Oracle homes, with directories db10g, oms10g and agent10g in the 'basedir'. Kinda hard to miss...
With proper environment setup, you could try
$ emctl status oms
To manage Targets (as called in EM terms), you would install a Management Agent on each host to start monitoring hosts, listeners, databases, application servers, oc4j instances, and other types of targets. You "add hosts" via addition of agents.
And one more thing , i have the oracle 817 databases
, in need to register that database into the GRID .
Can any one send me the proper doc. for 817 to
install into grid control db.No need to send anything, the documentation is available here on OTN (look in the top menu "shortcuts", Documentation -> Enterprise Manager).
There are several options (version dependent of course) available for deploying agents. But you need a OMS + Repository first.
Further discussion probably belongs in the dedicated Enterprise Manager.
Message was edited by:
orafad

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

Technical issues aside, there's still a legal issue.
Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

Since updating an iphone5 to ios8.3, it is no longer recognized by my pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

Since updating an iphone 5 to ios 8.3, it is no longer recognized by my Windows 7 pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

Read this
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back

Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
>

Deploying the FEP client (SCCM 2012 R2) on computers that already have the FEP client from a previouse failed site installation

Similar Messages

Maybe you are looking for