Deployment of windows 7 image

This question is very likely rudimentary in nature, however, Where is a solid guide to setup and execute a deployment of an image of windows 7, the purpose of this image and deployment being to reduce time spent on updates and loading of business specific
drivers for manufacturing of systems. I.E., Build a system, load all service packs and updates, load drivers and software specific to the company, take an image, use this image on consecutive systems. Other tidbits, no server access, computer systems are windows
7 prebuild computers. Any information would be helpful, even if just a link to somewhere that can explain this operation.

You should be using a tool called MDT (Microsoft Deployment Toolkit) which is a free OS Deployment solution from Microsoft.
There is alot of information and guides about MDT, here is one to get started:
http://trekker.net/archives/create-a-mostly-automated-reference-image-in-mdt-part-1/
Here are two other great blogs about os deployment:
http://deploymentresearch.com/Research.aspx
http://deploymentbunny.com/

Similar Messages

Microsoft Business Contact Manager 2013, addiiton MSSQL NT Service accounts and Sysprep deployment on WIndows 7

Hi all,
I'm running into a problem when trying to sysprep and deploy a Windows 7 image with Business Contact Manager pre-install during the audit mode. Before anyone shouts, I have posted the main question in the Windows 7 deployment forum, but I would like some
additional help as to what the "NT Service" Accounts are for with regards to the BCM insatalltion
During the installation of BCM, we get an installation of MSSQL, and during this installation MSSQL creates three user accounts used by the "NT Service" account:
MSSQL$MSSMLBIZ
MSSQLFLDLauncher$MSSMLBIZ
ReportServer$MSSMLBIZ
When you run 'sysprep' with generalise option, and use the CopyProfile in the Specialise pass, sysprep copies the profile information from the last 'changed' profile. Whilst this should be the Administrator profile (as far as I can see), what is happening
is that the profile from 'ReportServer$MSSMLBIZ' is being used.
The rule of thumb when using the CopyProfile option is to ensure that only ONE account is present - i.e. the current administrator profile. The easy option is therefore just to delete the MSSQL accounts.
In the current state of play, even after I deploy the generalized image (with the copied 'ReportServer$MSSMLBIZ' account), I end up with only three users when looking at
"Manage --> Local User and Groups" (the Administrator, Guest (disabled) and HomeGroupUser$ user), so all the above "NT Service\MSSQL" accounts disappear during the sysprep process in any case.
I'm not sure what the effect will be on BCM for the end user. Does anyone have any suggestions as to what might be the best course of action.
Cheers
Chris
Chris

I don't suppose anyone has got any cluse about these users, what they do and how best to then deploy BCM as part of an image?
Chris

Deployed Windows 7 Image failing to start -SCCM 2012 SP1

Hello, I am deploying windows 7 image using SCCM 2012 SP1, the installation goes thru fine but when it is in the process of restart, a blue screen is displayed for a split second and then it tries to reboot again with same results. Are there any logs on
the SCCM server I can check to see where the problem may be?

This generally means inaccessible boot device. How are you partitioning the drive and applying the image?
This is one way to do it
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_18.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How can i using MDT 2010 to deploy multiple partitions Windows 7 image?

Hello,
I am planning using MDT as a deploy windows 7 solutions. My Windows 7 is setup on parition 1 "C:" and users profile on parition 2 "D". I am already capture WIM for each paritions. How can i using MDT 2010 to deploy multiple partitions for Windows 7
image? together
Thanks

Having the users folder on a separate partitions is a bad idea because the Windows Setup was not really designed for it, it's more of a afterfix. In addition to that the deployment solutions in general have problem dealing with multiple partions.
Put it this way - The big warning text in the WAIK documentation about redirecting the users folder to another drive is there for a reason. It will break future offline servicing.
It doesn't mean it can't be done, it just means it will take you three times (at least) longer to setup/troubleshoot your deployment solution, and you will be in a world of pain the next time you want to re-image the machine.
This quote from a good friend of mine (Andreas Hammarskjold) describes it very well:
Generally I would always recommend to only have ONE partition these days. Going down the route of making multiple partitions is like having multiple wives/girlfriends/lovers… it’s all fun and games for a while but ends with disaster
- Andreas H.
/ Johan
Regards / Johan Arwidmark Twitter: @jarwidmark Blog: http://www.deploymentresearch.com FB: www.facebook.com/deploymentresearch

MDT : creating windows 7x64 images with required applications and deploying it

Hi,
We have to create windows 7 x64 and windows 8 images with all the custom applications and which can also be used on all the hardwares. I heard MDT can be used. How can I do this and what are the pre-requisites for installion and steps for configuring MDT
tool ?
do we need ADK for installing MDT ? I tried installing ADK ,but it says you need have ADK documentation_x86_en_us.msi.
Thanks.

For drivers, I have always used the .inf files.
For applications, it depends upon how you want to deploy them. Lots of people build their 'gold' image to contain all the applications they want installed, and then use that as a basis for deployment. Others build special scripts in to select
specific applications based on security groups.
The thing about MDT is that it is very flexible and can be adapted to a lot of different situations. You first need to define exactly how you plan to use it and then build your image(s) accordingly.
The guides you can find online will assist you in the specific steps for the solution option you chose. There is not a single, simple answer to cover all cases.
.:|:.:|:. tim

Trying to Create a Catalog file using WSIM (Windows System Image Manager)

I have been looking online for a solution to htis problem for days and come up with nothing so any help would be amazingly helpful.
I have created a Windows 8.1 image which I would like to role out to all users within my company but when trying to create a catalog file I am getting an erorr message saying "Windows SIM was unable to generate a catalog." It says "Mounting
Windows Image file......This might take a few minutes" and then fails after 6-7mins.
When opening the log file I get this:
10:00 : Cannot obtain read/write access for F:\sources\install.wim.
In order to generate a catalog file, you must have read/write access to the Windows image file and its containing folder.
10:13 :
10:13 : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows OPK or Windows AIK User's Guide.
10:13 :
10:13 : System.InvalidOperationException: The operation failed to complete. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: String reference not set to
an instance of a String.
Parameter name: source
   at System.Globalization.CompareInfo.IsPrefix(String source, String prefix, CompareOptions options)
   at ?A0xfe36268f.ConvertToNtPath(String path)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CbsSessionAdaptor..ctor(String bootDrive, String imageWinDir, String servicingPath)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl.InitializePackages()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageImpl..ctor(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
   at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.PlatformImplementation.CreateOfflineImageInstance(OfflineImageInfo imageInfo)
   --- End of inner exception stack trace ---
The one image that did work (LiteTouchPE_x64.wim) was from the OS I imported to Microsoft Workbench but the components are different to any that I have seen online when looking on how to do this.
I have made sure that the architecture is x64 and tried from ISO files I have on the system already but get the same error.
This is the first project I have been involved in and only ever done IT support before this.
Thanks for your help in advance.

Yes I am trying to capture a reference image that I have created on another machine and then reploy this through MDT. I am trying to open the Unattend.xml file because the "Capture and Sysprep" fails on the reference machine when trying to run
Sysprep. When I try to open the Unattend.xml file in MDT I get the error below:
Performing operation "generate" on Target "Catalog".
Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim" 1 > "C:\Users\*****\AppData\Local\Temp\3\Microsoft.BDD.Catalog.log"
2>&1
No existing catalog file found.
PROGRESS: 0: Starting.
PROGRESS: 0: Creating mount folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_Windows 8.1 Enterprise_njegg3ph.con.
PROGRESS: 5: Creating temp folder: C:\Users\*****\AppData\Local\Temp\3\IMGMGR_install_temp_qj0x3ga5.obv.
PROGRESS: 10: Mounting Windows image: D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim. This might take a few minutes.
ERROR: Unable to generate catalog on D:\Windows8.1 TEST3\Operating Systems\Windows8.1 x64\Sources\install.wim: System.ComponentModel.Win32Exception: The process cannot access the file because it is being used by another process
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.BDD.Catalog.Program.DoCatalog()
Non-zero return code from catalog utility, rc = 2002

Error with syspreped windows 7 image related to capisp.dll execution...

Hi Folks,
some time ago I crafted an windows 7 image with sysprep generalization for WDS deployment. In real there are 2 images: one dumped w/o sysprep and the another w/ (dumping with ImageX Tool from WAIK for W7/W2K8R2). The syspreped one I delivered to our WDS
Server. In the past I made several changes based on the non-syspreped image (incl. WUs) and afterward I've generated a new syspreped version from it. ...and now, since the last revision und sysprep run the last syspreped version (stored at the WDS) is no longer
installable onto any target machine... Ervery time I tried to deploy this version from the WDS at the target machine an error popup occurs and says that this image cannot be installed at this target machine type (see *** - the german message). Examinig the
SETUPACT.LOG / SETUPERR.LOG files the following problem has been stated:
2010-06-21 14:22:54, Info       [0x0f0081] SYSPRP LaunchDll:Successfully executed 'C:\Windows\System32\sppnp.dll,Sysprep_Specialize_Pnp' without error
2010-06-21 14:22:54, Info       [0x0f008b] SYSPRP RunRegistryDlls:Found entrypoint in registry at SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\SysPrep\Specialize\{2172c981-2c23-e969-b30d-046ffeeb096e}; will try to launch 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize'
2010-06-21 14:22:54, Info       [0x0f0080] SYSPRP LaunchDll:Found 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize'; executing it
2010-06-21 14:22:54, Info                         capisp.dll::CheckIFCryptoSysPrepSpecialized: returning 0
2010-06-21 14:22:55, Info                         capisp.dll::CryptoSysPrep_Specialize: assigned CAPI machine guid "44d42aa2-dee4-4023-bea5-d2f166bbb42c"
2010-06-21 14:22:55, Info                         capisp.dll::DisableAdministratorIfApplicable disabled the admin account.
2010-06-21 14:22:55, Info                         capisp.dll::CryptoSysPrep_Specialize: returning 5
2010-06-21 14:22:55, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 5[gle=0x000003e5]
2010-06-21 14:22:55, Info                  IBS    Callback_Specialize: Internal Providers Specialized Failed. System can't proceed to handle Internal Providers
2010-06-21 14:22:55, Info                  IBS    Callback_Specialize: Specialize return: [5]
2010-06-21 14:22:55, Error      [0x060435] IBS    Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x5
2010-06-21 14:22:55, Info       [0x0640ae] IBSLIB PublishMessage: Publishing message [***Windows kann nicht für die Ausführung auf der Hardware dieses Computers konfiguriert werden.]
The mentioned error is the only one.
ANY help is very appreciated!
From Colonel Gizmo

Hi,
Regarding the returned error code, error code 0x5 is a “Access denied” error. It seems that the sysprep disables the administrator account, it can’t
process the capisp.dll and pass CryptoSysPrep_Specialize. To resolve this kind of issue, I would like to suggest:
1.
Ensure that you deploy image running as Administrator account.
2.
Mount the image and check if the capisp.dll file exists and try taking ownership of it.
3.
Open Registry Editor and navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Specialize
Check if there is an entry with the Data:
C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize , make sure it is spelled correctly and check the permissions on the above key.
4.
Then deploy again.
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you.

Machine deployed from Windows 8.1 media with Update slipstreamed prompting for installation of KB2919355

I'm preparing a "Windows 8.1 Update" OS deployment in SCCM and have encountered an issue.
Here's what I did:
Downloaded SW_DVD9_SA_Win_Ent_8.1_64BIT_English_-2_MLF_X19-49847.ISO from the Volume Licensing site
Extracted install.wim from the ISO
Mounted the WIM with DISM to add the KB2959977 package (as directed
here, using
these instructions)
Deployed the image with SCCM
After imaging a VM and booting it, I went into Windows Update and was prompted to install "Windows 8.1 Update for x64-based Systems (KB2919355)". It is my understanding the media I used should have the Windows 8.1 Update integrated into it. Can
anyone explain why Windows Update is offering this update to be installed?
Edit: Here's the output of "dism /image:mount /Get-Packages" ran against the WIM which confirms the KB2919355 package is applied to the WIM:
Deployment Image Servicing and Management tool
Version: 6.3.9600.16384
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 18/03/2014 9:30 AM
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 2:46 PM
Package Identity : Microsoft-Windows-Security-SPP-Component-SKU-Enterprise-GVLK-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 9:51 AM
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2919442~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 18/03/2014 9:55 AM
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2939471~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 16/04/2014 11:19 PM
The operation completed successfully.

This is explained in this KB article, where it states:
The MSDN and VLSC updated ISOs do not contain the complete set of fixes that are offered from Windows Update. Therefore, Windows Update and WSUS will offer the KB2919355 update again to computers that are deployed by using the images in these ISOs. This
is expected and does not result in the full reinstallation of the Windows 8.1 Update but only one smaller component of it. The rest of the update will not be downloaded or reinstalled.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

How to enable statusbar of I.E by default in windows 7sp1 image

sir how to enable status-bar of I.E in windows 7sp1 image, can we enable it by DISM?

Hi,
You can first customize IE with using IEAK, then add this IE as a part of your Windows 7 SP1 imagine build.
Here is an example
How to configure IEAK 7, IEAK 8 or IEAK 9 to deploy Internet Explorer 7, 8 or 9 with the menu bar visible without using Group Policy
http://camie.dyndns.org/technical/ieak9-always-show-menus/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Deployment of Windows 8.1 Pro while maintaining OEM Licence

Hi All
I was wondering if someone could help me.
The company I work for will be purchasing 50 new laptops for our sales team. These laptops will come with windows 8.1 Pro OEM installed.
My question is; can I re-deploy a Windows 8.1 image containing my companies bespoke software whilst retaining the OEM licences? If so, how would I go about this?
I have setup a WDS server and already have an image with the software on that does work when I boot to the server, but obviously I need to register windows. But the licence key is unattainable.
Any help would be much appreciated.
Kind Regards,
Cx~

Hi Cx,
We can deploy our laptop by customize a Windows 8.1 image.
Regarding the activation,it doesn't like windows 7 OEM .
If you use a OEM image,we can activate your system using OEM license.
But if you use Windows 8.1 Pro without OEM version,I think we should purchase Volume license key to activate your system.
Regards,

Error while capturing Windows Xp image with MDT 2012.

Hi,
here is the log file. please go thriugh this log and resolve my issue.
------ Applying bootable Windows PE image ------ LTIApply
LTI applying Windows PE LTIApply
FAILURE ( 5610 ): False: Verify File:
\\WIN-0KLPXWQQGYL\DeploymentShare$\Boot\LiteTouchPE_x86.wim LTIApply
Command completed, return code = -2147467259 LiteTouch
Litetouch deployment failed, Return Code = -2147467259 0x80004005 LiteTouch
For more information, consult the task sequencer log ...\SMSTS.LOG. LiteTouch
Property RetVal is now = -2147467259 LiteTouch
CleanStartItems Complete LiteTouch 1
About to run command: MSHTA.exe "\\WIN-0KLPXWQQGYL\DeploymentShare$\Scripts\Wizard.hta" /definition:Summary_Definition_ENU.xml LiteTouch
Property definition is now = Summary_Definition_ENU.xml Wizard
Microsoft Deployment Toolkit version: 6.0.1763.0 Wizard
Not Wizard = False Wizard
Property WizardComplete is now = N Wizard
Property WizardComplete is now = Y Wizard
Command completed, return code = 0 LiteTouch
Unable to copy log to the network as no SLShare value was specified. LiteTouch
CleanStartItems Complete LiteTouch 10/31/2011 11:53:46 AM 0 (0x0000)
Unregistering TSCore.dll. LiteTouch 10/31/2011 11:53:46 AM 0 (0x0000)
About to run command: wscript.exe "\\WIN-0KLPXWQQGYL\DeploymentShare$\Scripts\LTICleanup.wsf"
ZTI ERROR - Non-zero return code by LiteTouch, rc = -2147467259 0x80004005

Error 0x7b is something different. IT means that you don't have the correct storage driver installed. Are you running an IHCA? To get around this most IT professionals will create their images on *virtual machines* like Hyper-V. YOu won't need to load any
special drivers, and even better the image you create will be pretty clean (as long as it's a generic image). Don, It's not clear from *where* you received the 7b, Was it within Windows XP? Within WinPE, or somewhere else? Be specific.
Additionaly, the "Sysprep and Capture" Task Sequence Template is great if you *already* have the image created just the way you want. However, if you are starting from scratch, I would recommend looking into using the *full* "CLient" deployment Task Sequence
Template. That will allow you to deploy the OS, install applications, sysprep *AND* capture all in one automated process.
Keith Garner - keithga.wordpress.com

Windows Intune support deployment for windows phone (8.1) *.appx files

Hi
We are trying to deploy a windows phone 8.1 appx file with intune (over sccm console). the appx file is signed with a valid symantec certificate.
the installation of the app fails, either when we upload the file as "Required" (so pushing it automatically to the devices) or when we make the app on the company portal app available.
in the sccm console the deployment status says failed -> unkonwn error.
when we use .xap file of an windows 8.0 app, it works like a charm and the xap file is signed with the same certificate.
My question is, is there no support for publishing windows phone 8.1 appx files on Intune? Or what can it be?
Thanks for any hints

UPDATE
According to these links and the comments from Mitch Denny, can somebody confirm that .appx files (company apps) cannot be deployed/installed on windows phone 8.1 yet?
http://blogs.technet.com/b/windowsintune/archive/2014/05/12/what-s-coming-next-with-windows-intune.aspx
http://blogs.technet.com/b/windowsintune/archive/2014/04/28/availability-of-update-to-windows-intune-for-windows-phone-8-1-and-samsung-knox-standard.aspx
I would really appreciate if someone can confirm me this, because im struggling with this since days and there is no official statement from MS.
Thanks

Windows ISO image, what is it and how can I get it to install boot camp?

I'm not very computer savvy, so if you want to help me out, all I ask is that you dumb things down for me I'm trying to install bootcamp on my computer. My ultimate goal is to install Mathcad. I'm stuck on the Windows ISO image step. I don't know what the ISO image is or where it is... This is what it all looks like. Please help!

If you have a networked printer, they sometimes have SD Card slots, USB thumbdrive slots, etc... and the printer offers to be a file server to share the contents of those removable camera storage devices.
It is possible your home WiFi router can also act as a printer server, or with a USB disk (or thumb drive) attached, a file server.
You could use a utility such as Bonjour Browser which will give you more information about the devices it sees on your home network
<http://www.macupdate.com/app/mac/13388/bonjour-browser>

Adding drivers to Windows 7 image with DISM

I'm trying to add Intel chipset drivers to a Windows 7 image (.wim file). I was able to add some Broadcom network drivers without any problems, but when I try to add the chipset drivers, I get this error:
"Error - An error occurred. The driver package could not be installed. For more information, check for log files in the <windir>\inf folder of the target image."
Here's an excerpt from the log file:
>>> [Import Driver Package - c:\drivers\Chipset\tcrkusb.inf]
>>> Section start 2011/05/06 14:04:54.454
os: Version = 6.1.7601, Service Pack = 1.0, Suite = 0x0100, ProductType = 1, Architecture = x86
cmd: C:\Users\b2pra\AppData\Local\Temp\56E388AA-F02D-4187-BB45-50C56E7C41D4\dismhost.exe {11D7C1E2-233E-4FF8-A893-3559C2D292E3}
sto: Importing driver package into Driver Store:
sto: Driver Store = C:\winimg\Windows\System32\DriverStore (Offline | 6.1.7601)
sto: Driver Package = c:\drivers\Chipset\tcrkusb.inf
sto: Architecture = x86
sto: Locale Name = neutral
sto: Flags = 0x00000000
inf: Opened INF: 'c:\drivers\Chipset\tcrkusb.inf' ([strings])
inf: Opened INF: 'C:\winimg\Windows\System32\DriverStore\FileRepository\usbport.inf_x86_neutral_f9abf85fd00186bd\usbport.inf' ([strings.0409])
inf: Opened INF: 'c:\drivers\Chipset\tcrkusb.inf' ([strings])
sto: Importing driver package files:
sto: Source Path = c:\drivers\Chipset
sto: Destination Path = C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'c:\drivers\Chipset'
flq: SourceFilename - 'tcrkusb.cat'
flq: TargetDirectory- 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'c:\drivers\Chipset'
flq: SourceFilename - 'tcrkusb.inf'
flq: TargetDirectory- 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=2
flq: {_commit_copy_subqueue}
flq: subqueue count=2
flq: source media:
flq: SourcePath - [c:\drivers\Chipset]
flq: SourceFile - [tcrkusb.cat]
flq: Flags - 0x00000000
flq: {_commit_copyfile}
flq: CopyFile: 'c:\drivers\Chipset\tcrkusb.cat'
flq: to: 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc\SET7554.tmp'
!!! flq: CopyFile: FAILED!
!!! flq: Error 5: Access is denied.
!!! flq: Error installing file (0x00000005)
!!! flq: Error 5: Access is denied.
! flq: SourceFile - 'c:\drivers\Chipset\tcrkusb.cat'
flq: TempFile - 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc\SET7554.tmp'
! flq: TargetFile - 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc\tcrkusb.cat'
flq: {SPFQNOTIFY_COPYERROR}
!!! sto: Failed to copy file 'c:\drivers\Chipset\tcrkusb.cat' to 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc\tcrkusb.cat'. Error = 0x00000005
sto: File 'c:\drivers\Chipset\tcrkusb.cat' is not in use by any processes.
flq: {SPFQNOTIFY_COPYERROR - returned 0x00000000}
!!! flq: SPFQNOTIFY_COPYERROR: returned SPFQOPERATION_ABORT.
!!! flq: Error 2: The system cannot find the file specified.
flq: {_commit_copyfile exit(0x00000002)}
flq: {_commit_copy_subqueue exit(0x00000002)}
!!! flq: FileQueueCommit aborting!
!!! flq: Error 2: The system cannot find the file specified.
flq: {_commit_file_queue exit(0x00000002)}
!!! sto: Failed to copy driver package to 'C:\winimg\Windows\System32\DriverStore\FileRepository\tcrkusb.inf_x86_neutral_7736aa821aa7f9cc'. Error = 0x00000005
!!! sto: Failed to import driver package into Driver Store. Error = 0x00000005
<<< Section end 2011/05/06 14:04:55.140
<<< [Exit status: FAILURE(0x00000005)]
Am I doing something wrong? Thanks!

Hi,
Did these drivers support to Windows 7? Could you please point where did you download the chipset drivers? I will make a test to add on my WIM to check if the drivers
have problem.
Furthermore,
check if you really need these drivers for your computer:
http://www.intel.com.../support/detect
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does
not guarantee the accuracy of this information.
And there’s the steps about
How to add Chipsets drivers inside the image install.wim:
1) Expand the file ***.zip
2) You will see the files for Windows 7 inside the folder ***\WIN7
3) Copy/paste all the files (.inf and .cat files) inside a folder (example: C:\Drivers\Chipsets)
4) Mount the image you want to integrate the drivers (example above).
5) Integrate drivers with the command line
6) Unmount /Commit
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Crystal Report XI R2 Sp6 - Deploy on Windows 7

i'm trying to deploy CR XI R2 on p.c. with windows 7 32bit/64bit
i'have buil a setup package with contains a reference to "CrystalReports11_5_NET_2005.msm"
i have installade this package on my test machine and i try to use my local web app to print
(i have reference to:
                    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.ReportSource, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/></assemblies>
application don't work
it's possible that i can't deploy on windows 7?
tahnk you

It would be really nice to have more than just "application don't work :-("
CR XI SP 6 is supported on WIN 7. But, more info is required;
What error messages are you getting?
What's the behavior?
What do you actually see?
What are the symptoms?
What is the version of crpe32.dll on your development computer and the Win 7 computer?
The more info you give, the more likely it is we will be able to resolve it.
Ludek

Deployment of windows 7 image

Similar Messages

Maybe you are looking for