Machine deployed from Windows 8.1 media with Update slipstreamed prompting for installation of KB2919355

I'm preparing a "Windows 8.1 Update" OS deployment in SCCM and have encountered an issue.
Here's what I did:
Downloaded SW_DVD9_SA_Win_Ent_8.1_64BIT_English_-2_MLF_X19-49847.ISO from the Volume Licensing site
Extracted install.wim from the ISO
Mounted the WIM with DISM to add the KB2959977 package (as directed
here, using
these instructions)
Deployed the image with SCCM
After imaging a VM and booting it, I went into Windows Update and was prompted to install "Windows 8.1 Update for x64-based Systems (KB2919355)". It is my understanding the media I used should have the Windows 8.1 Update integrated into it. Can
anyone explain why Windows Update is offering this update to be installed?
Edit: Here's the output of "dism /image:mount /Get-Packages" ran against the WIM which confirms the KB2919355 package is applied to the WIM:
Deployment Image Servicing and Management tool
Version: 6.3.9600.16384
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 18/03/2014 9:30 AM
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 2:46 PM
Package Identity : Microsoft-Windows-Security-SPP-Component-SKU-Enterprise-GVLK-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 9:51 AM
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2919442~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 18/03/2014 9:55 AM
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2939471~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 18/03/2014 10:20 AM
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 16/04/2014 11:19 PM
The operation completed successfully.

This is explained in this KB article, where it states:
The MSDN and VLSC updated ISOs do not contain the complete set of fixes that are offered from Windows Update. Therefore, Windows Update and WSUS will offer the KB2919355 update again to computers that are deployed by using the images in these ISOs. This
is expected and does not result in the full reinstallation of the Windows 8.1 Update but only one smaller component of it. The rest of the update will not be downloaded or reinstalled.
Hope this helps,
David
Windows Outreach Team - IT Pro
The Springboard Series on TechNet

Similar Messages

  • Remote deploys from Windows to Linux fail with deployment plans on WLS 10.0

    Hi there,
    We're using WLS 10.0.1 running in a RHEL environment (actually CentOS release 4.7 for development), and attempting to perform remote deploys from Windows work stations using the weblogic.Deployer ant task.
    It works fine when not using deployment plans, or when performing a remote deploy from a unix based work station such as a Mac. However, introducing a deployment plan causes a failure only when run from Windows.
    The log trace follows:
    weblogic.Deployer -debug -remote -verbose -upload -noexit -name obpservices -source C:\work\obf\ver4.0\services\target\obpservices.war -targets obEnterpriseServer -adminurl t3://wlsdev:7001 -user weblogic -password ******** -redeploy -plan C:\work\obf\ver4.0\services/src/runtime/deployment-plans/steves-deployment-plan.xml
    weblogic.Deployer invoked with options: -debug -remote -verbose -upload -noexit -name obpservices -source C:\work\obf\ver4.0\services\target\obpservices.war -targets obEnterpriseServer -adminurl t3://wlsdev:7001 -user weblogic -redeploy -plan C:\work\obf\ver4.0\services/src/runtime/deployment-plans/steves-deployment-plan.xml
    [WebLogicDeploymentManagerImpl.<init>():103] : Constructing DeploymentManager for J2EE version V1_4 deployments
    [WebLogicDeploymentManagerImpl.getNewConnection():146] : Connecting to admin server at wlsdev:7001, as user weblogic
    [ServerConnectionImpl.getEnvironment():288] : setting environment
    [ServerConnectionImpl.getEnvironment():291] : getting context using t3://wlsdev:7001
    [ServerConnectionImpl.getMBeanServer():239] : Connecting to MBeanServer at service:jmx:t3://wlsdev:7001/jndi/weblogic.management.mbeanservers.domainruntime
    [ServerConnectionImpl.getMBeanServer():239] : Connecting to MBeanServer at service:jmx:t3://wlsdev:7001/jndi/weblogic.management.mbeanservers.runtime
    [DomainManager.resetDomain():36] : Getting new domain
    [DomainManager.resetDomain():39] : Using pending domain: false
    [MBeanCache.addNotificationListener():96] : Adding notification listener for weblogic.deploy.api.spi.deploy.mbeans.TargetCache@359df4
    [MBeanCache.addNotificationListener():103] : Added notification listener for weblogic.deploy.api.spi.deploy.mbeans.TargetCache@359df4
    [MBeanCache.addNotificationListener():96] : Adding notification listener for weblogic.deploy.api.spi.deploy.mbeans.ModuleCache@375edb
    [MBeanCache.addNotificationListener():103] : Added notification listener for weblogic.deploy.api.spi.deploy.mbeans.ModuleCache@375edb
    [ServerConnectionImpl.initialize():171] : Connected to WLS domain: obportal_domain
    [ServerConnectionImpl.setRemote():482] : Running in remote mode
    [ServerConnectionImpl.init():161] : Initializing ServerConnection : [email protected]9a
    [BasicOperation.dumpTmids():691] : Incoming tmids:
    [BasicOperation.dumpTmids():693] : {Target=obEnterpriseServer, WebLogicTargetType=server, Name=obpservices}, targeted=true
    [RedeployOperation.setupPaths():86] : in place redeploy: false from moduleArchive: C:\work\obf\ver4.0\services\target\obpservices.war
    [RedeployOperation.setupPaths():95] : redeploy src path: C:\work\obf\ver4.0\services\target\obpservices.war
    [BasicOperation.deriveAppName():140] : appname established as: obpservices
    <20/10/2009 10:47:57 AM EST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating redeploy operation for application, obpservices [archive: C:\work\obf\ver4.0\services\target\obpservices.war], to obEnterpriseServer .>
    [ServerConnectionImpl.upload():658] : Uploaded app to /opt/bea/user_projects/domains/obportal_domain/servers/AdminServer/upload/obpservices
    [BasicOperation.dumpTmids():691] : Incoming tmids:
    [BasicOperation.dumpTmids():693] : {Target=obEnterpriseServer, WebLogicTargetType=server, Name=obpservices}, targeted=true
    [BasicOperation.loadGeneralOptions():608] : Delete Files:false
    Timeout :3600000
    Targets:
    obEnterpriseServer
    ModuleTargets={}
    SubModuleTargets={}
    Files:
    null
    Deployment Plan: \opt\bea\user_projects\domains\obportal_domain\servers\AdminServer\upload\obpservices\plan\steves-deplo
    yment-plan.xml
    App root: \opt\bea\user_projects\domains\obportal_domain\servers\AdminServer\upload\obpservices
    App config: \opt\bea\user_projects\domains\obportal_domain\servers\AdminServer\upload\obpservices\plan
    Deployment Options: {isRetireGracefully=true,isGracefulProductionToAdmin=false,isGracefulIgnoreSessions=false,rmiGracePeriod=-1,retireTimeoutSecs=-1,undeployAllVersions=false,archiveVersion=null,planVersion=null,isLibrary=false,libSpecVersion=null,libImplVersion=null,stageMode=null,clusterTimeout=3600000,altDD=null,altWlsDD=null,name=obpservices,securityModel=null,securityValidationEnabled=false,versionIdentifier=null,isTestMode=false,forceUndeployTimeout=0,defaultSubmoduleTargets=true,timeout=0}
    [BasicOperation.execute():425] : Initiating redeploy operation for app, obpservices, on targets:
    [BasicOperation.execute():427] : obEnterpriseServer
    [RedeployOperation.initializeTask():55] : Starting task with path: \opt\bea\user_projects\domains\obportal_domain\servers\AdminServer\upload\obpservices\app\obpservices.war
    java.io.FileNotFoundException: \opt\bea\user_projects\domains\obportal_domain\servers\AdminServer\upload\obpservices\plan\steves-deployment-plan.xml (No such file or directory)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.<init>(FileInputStream.java:106)
    at weblogic.deploy.internal.adminserver.operations.AbstractOperation.parsePlan(AbstractOperation.java:1027)
    at weblogic.deploy.internal.adminserver.operations.AbstractOperation.execute(AbstractOperation.java:133)
    at weblogic.management.deploy.internal.DeployerRuntimeImpl$2.run(DeployerRuntimeImpl.java:816)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.management.deploy.internal.DeployerRuntimeImpl.performDeployerActions(DeployerRuntimeImpl.java:810)
    at weblogic.management.deploy.internal.DeployerRuntimeImpl.redeploy(DeployerRuntimeImpl.java:568)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:443)
    at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
    at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
    at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:248)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:153)
    at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:63)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:153)
    at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443)
    at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:377)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:375)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:310)
    at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1408)
    at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
    at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1245)
    at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1348)
    at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:782)
    at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:479)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:475)
    at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:59)
    at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:1016)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    [ServerConnectionImpl.close():334] : Closing DM connection
    [ServerConnectionImpl.close():354] : Unregistered all listeners
    [ServerConnectionImpl.closeJMX():374] : Closed JMX connection
    [ServerConnectionImpl.closeJMX():386] : Closed Runtime JMX connection
    [ServerConnectionImpl.closeJMX():398] : Closed Edit JMX connection
    Note the file path that cannot be found: "\opt\bea\user_projects\domains\obportal_domain\servers\AdminServer\upload\obpservices\plan\steves-deployment-plan.xml ".
    Of course this file does actually exist when the correct path separators are used.
    Is this a bug? Is there anything we can do about it? The chances of us upgrading WLS are very remote unfortunately.
    Thanks in advance,
    Steve C

    This is something you should definitely file an Oracle support ticket for. It's entirely possible there's a patch for this.

  • Automatic Virtual Machine Activation failing on Server 2012 R2 with Update

    Appears AVMA is now broken on new media with Update:
    Trying to use the Key from:
    http://technet.microsoft.com/en-us/library/dn303421.aspx
    en_windows_server_2012_r2_with_update_x64_dvd_4065220.iso
    Receive the message "We Couldn't Verify the product Key. Please check your installation Media
    Works fine with
    en_windows_server_2012_r2_x64_dvd_2707946.iso
    I have downloaded the media more than once with same error.  Do we need to update the AVMA Key?
    Thanks

    Hi JAM ,
    Is the first ISO downloaded from MS official web site ?
    If yes , please use command " slmgr /dlv "to check the server edition , if it is evaluation edition please refer to the following similar thread :
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/d6792f61-36aa-46d5-abc6-880cd1437da6/windows-server-2012-evaluation-activation-issue?forum=winserver8setup
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to acquire from various AI channels simultaneously with a different range for each one?

    How to acquire from various AI channels simultaneously with a different range for each one?
    In LabView I have found some examples but in C there isn't seem to be any.
    Solved!
    Go to Solution.

    Or you can add channels one by one with individual instructions: the follwing code compile and runs with no errors on a vitual daq device:
    err = DAQmxCreateTask ("", &taskH);
    err = DAQmxCreateAIVoltageChan (taskH, "Dev1/ai0", "AI0", DAQmx_Val_Cfg_Default, -5.0, 5.0, DAQmx_Val_Volts, "");
    err = DAQmxCreateAIVoltageChan (taskH, "Dev1/ai1", "AI1", DAQmx_Val_Cfg_Default, -10.0, 10.0, DAQmx_Val_Volts, "");
    DAQmxStartTask (taskH);
    err = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, &read, 0);
    DAQmxClearTask (taskH);
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • I changed my Apple ID and all was good except for my mac. A window keeps popping up with my old ID for the iCloud. I ran out of solution. can some help

    I changed my Apple ID and all was good except for my mac. A window keeps popping up with my old ID for the iCloud. I ran out of solution. can some help

    Sign out of iCloud on your Mac, then sign back in with the new ID.

  • Adobe Media Encoder update is available for this version

    When I exporting a sequence in Adobe Premiere Pro CS5, there comes a screen appears and indicates that "Adobe Media Encoder update is available for this version."
    I go to the page "www.adobe.com / go / updates and downloads" Adobe Media Encoder CS 5.5.1 for windows 64-bit "
    Subsequently I start the download file and get a message "Some updates were not installed"
    How do I fix my problem and get the latest update installed, or get Adobe Premiere Pro CS5 for not knowing modest and the available update for "Adobe Media Encoder"

    I selected run as administrator, no effect.
    I am using version 5.0.3, on win7  when i select help and update the adobe application manager reads "your aplications are all up-to-date", i would assume this is the current version.
    No matter what i try to export from any project regardless of codec or output i receave this message
    "an adobe media encoder update is availiable for this version of premierepro. to download the latest update, pleas run  the adobe updater form the help menue orvosot http://adobe.com/go/updates."
    I went to the help menue and selected help and i still get the adobe application manager "your aplications are all up-to-date"
    thanks for the help

  • Changing From Windows 8.1 PRO with Media Center To Just Windows 8.1 PRO

    Hi,
    I am trying to convert my windows to Windows  8.1 PRO from an unactivated version of Windows 8.1 PRO with Media Center (a free trial I got when I purchased my computer that expired). I am having an issue where it says to "Activate Windows."
    I purchased a Windows 8.1 PRO key and when I try to enter it into the "Activate Windows" under PC settings, it tells me that "This key can't be used to activate this version of windows." What do I do?

    Check with MS activation support : http://support.microsoft.com/kb/950929
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • How uninstall WSUS server role from Windows Server 2008 R2 with database hosted on remote SQL server?

    Hello, 
    I'm looking to uninstall the WSUS server role 3.0 from Windows Server 2008 R2 SP1. The thing is the database is hosted on a remote MS SQL server. I want to remove the database as well. I would like help for figuring out what I need to do to completely remove
    WSUS and its database.
    Any kind of help is appreciated! Thanks  

    Hi,
    WSUS offers limited support for running database software on a computer that is separate from the computer where the rest of WSUS is installed. This section offers step-by-step
    instructions for how to install WSUS in this configuration.
    If you meet the uninstall issue with the normal uninstall, please post the detail information for us but if you just want to manage the WSUS related SQL data, you can refer
    the following KB then delete corresponding database.
    In the general procedure, you will create the related WSUS database as below::
    Run WSUS Setup from the command line, using the SQLINSTANCE_NAME=servername\instancename command-line option, where servername is the name of the remote computer, and instancename
    is the name of the SQL Server instance that you will use for WSUS.
    More information:
    Choose the Database Used for WSUS 3.0
    http://technet.microsoft.com/en-us/library/cc708452(v=ws.10).aspx
    Appendix B: Configure Remote SQL
    http://technet.microsoft.com/en-us/library/cc708595(v=ws.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • WDS service will not start Windows Server 2012 R2 with Update

    Greetings,
    After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
    Any suggestions?  Am I missing a Win-PE boot Image?  Should I do something else?
    Please assist,
    Bob Hessenauer

    All,
    The problem was a conflict between DHCP and WDS.  Followed the instructions in this article and all is now fine:
    https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
    Just so you know,
    Bob Hessenauer

  • Issue with Update Rollup 5 for Exchange 2010 SP3 - Mailboxes that were auto mapped not working

    Below is  my response in another thread but creating a new one in the hopes that someone has the same issue and a solution besides mine below.
    Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
    Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
    What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
    Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
    the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
    I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
    This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

    Not sure why it was suggested to use the auto mapping feature to grant permissions because that is the component that is causing the issue. Also, there is nothing wrong with the auto configuration because the user can access their own mailbox just fine and
    also select mailboxes in their Outlook that were NOT auto mapped.
    With that said, here is how I fixed them all.
    Remove the permissions using the Exchange Console. Don't forget Send As
    Wait about 15 minutes. The mailbox should disappear from the users Outlook
    Open an Exchange PowerShell window and run the following command:
    .\add-mailboxpermissionsnoautomap.ps1 -Identity mailbox -User user -AccessRights FullAccess
    Have the user add the mailbox to their Outlook using the manual process.
    All is well....
    If you don't have the PS script add-mailboxpermissionsnoautomap.ps1, you can download it. I stumbled across it a few years ago and use it all the time. If you can't find it, just use the Exchange built in command for adding mailbox folder permissions but
    specify automap $false.
    The idea here is to grant the user access without auto mapping.

  • Windows 7 clients need to update printer driver for no reason

    I have a problem with my Windows 7 clients in domain. We have 2012 print server and multiple printers installed on it. I installed a brand new Canon IR printer with a new driver from Canon webpage. After I did that, almost all Windows 7 clients got a warning
    that they need to update driver for printing. Those clients are NOT using the printer I installed, but the other ones (who worked fine until my installation). Is it possible that installing new printer cause other compatible printers to update themselfs???
    Can I avoid it in the future?

    Hi IvanSa83,
    The main issue is that installing a new printer will affect other printers, right?
    Here is a similar symptom and the environment is Windows 7 ,Windows 2003 Server. The OP in this case has resolved this issue by modifying the Group policy called “Point and Print Settings Restrictions”. This policy will influence Windows Vista and the later
    version.
    As the link posted by OP said: When an administrator updates a printer driver on a shared print server, the Point and Print feature automatically updates printer drivers from the print server to a client computer. Some printers may share driver files
    across several printer models or across a family of printers. An update to one of these shared driver files will cause client computers to update the drivers for any device that depends on the updated files.
    Here is the case link :
    Windows 7 client "Driver update required" status when other printers installed / updated on Win Server 2003
    https://social.technet.microsoft.com/Forums/en-US/3c8d8c6f-b216-464d-92b7-ef94838ae36b/windows-7-client-driver-update-required-status-when-other-printers-installed-updated-on-win?forum=winserverprint
    Here is the group policy path: Computer Configuration \Administrator Templates\Printers
    Best regards

  • Can you make Sysprep on Windows 8.1 and Server 2012 R2 Prompt for a Computer Name

    Hi guys,
    Our Windows 7 Unattend.xml has always made Sysprep prompt for Computer Name. I'm struggling to achieve that with Windows 8.1 and Svr 2012 R2.
    Firstly: Is it still possible?
    Secondly: If so, How?
    Thanks

    OOBE will only hide pages that contain the answers in the XML. So if you want OOBE to prompt for a computer name, make sure your XML does not contain the ComputerName object.

  • Getting error NSURLErrorDomain error -1100 when trying to get updates from the App Store.  Are updates still available for OS below Maverick?

    Started getting this error today (01/14/2014) when trying to download updates from the App Store for my MBAir 11" mid 2013.  Error:  NSURLErrorDomain error -1100
    Are updates still available for OS below Maverick?

    That error may result from connecting to a cellular network via a phone or mobile broadband device. If that's what you're doing, try another network.

  • Windows 8 and OEM media with updates and software

    Recently i had an idea to create a custom Windows 7, 8 OEM image that includes all the Windows updates and also has couple of softwares inside it (adobe reader, java, flash etc). I used MDT to do this. I came to this idea because every time i prepared
    a computer for my customers it took a really long time with all the updates and software i had to install. When i started imaging Windows 8 i stumbled upon a little problem. As everybody knows Windows 8 OEM keys are no longer located on the stickers that are
    on the computers. As i have understood it they are basically located somewhere in the BIOS. So, finally to my question :) .  Is it somehow possible to retrieve the OEM key from the BIOS so that i could use my custom OEM image ? Right now i can't activate
    my Windows 8 OEM's because there are no way for the operating system to access the key that is in the BIOS.

    Hi,
    The OEM license allows the organization to use that pre-installed image on that OEM PC only. If the PC fails in the future and the image needs to be restored, the organization needs to use the original recovery media provided by the OEM to re-install the
    image.
    I suggest you consult with  the manufacturer for more information.
    Alex Zhao
    TechNet Community Support

  • Can I install windows 8.1 from windows ssd hard drive with bootcamp?

    I recently bought a 2009 macbook pro wiht Maverick 10.9.  I had a PC running W8.1 on a crucial ssd.  The ssd is working fine, it was the motherboard that was broken.  I was wondering if I could image a partition on the macbook with the image software crucial provided to install W8.
    Any input can help
    Thanks

    Instead of trying to copy the Windows copy you have on the SSD to the internal hard drive, what I would do is to buy a USB to SATA hard drive and connect the SSD to the Mac through the USB port, and then start up your Mac from it if you need to use Windows 8.1. To do it, hold the Option (Alt) key while your Mac is starting up.
    Apple does not support Windows 8 on the 2009 MacBook Pro, so you may have some problems with the trackpad and function keys

Maybe you are looking for