Deployment Packages Empty, WSUS syncs fine

Hello everyone
I have a 2007 r2 SCCM and 3.0 WSUS environment. I am trying to troubleshoot why my deployment packages are empty.
Looking at WSUS content folder, I have nearly 15 GB of data in there that appears to be all of the update information required. However when I attempt to Download the updates through SCCM from the internet, SCCM attempts to download, appears to show
that it is finished but each update says "Unable to contact server - timeout". Now I know this server can access the internet since WSUS has no problems connecting to Microsoft Updates.
Is the server being contacted the WSUS server? I downloaded the superflows on this but it really wasnt clear to me. if the server being contacted is Microsoft Update, then there really should be no reason why there is a communication issue since
the Proxy is set up through SCCM and WSUS uses that info to contact Microsoft Update.
What ends up is that in the directory where the updates deployments are stored, is a whole lot of empty GUID.1 directories, and no updates are deployed.
if you folks have an idea, please fire em off...
Matthew

Hi,
it is actually the computer where you run the sccm admin console that does the downloading of updates so you can use another computer with the console installed instead of the sccm site server.
The WSUS server content is never used when you use WSUS together with SCCM, it is only used to download information about available updates that the then shown in the admin console and by the clients when the clients scan for updates, then they use the wsus
server as well to download information about which updates it sould scan for.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

How can I get my iTunes playlists to sync with my iP4? Everything else syncs fine but my iPod is empty!

How can I get my iTunes playlists to sync with my iP4? Everything else syncs fine but my iPod is empty!

Shouldn't be difficult but can help if you tell us what options you picked on how you want to sync your music as there is more than on option/way.

SCCM WSUS Deployment Package Confirmation

Hello,
Our WSUS setup is pretty much finalized but wanted a quick clarification so I can draw out a procedure. Let's assume I have 400 security updates that I need to make sure are deployed and I have E:\WSUS\Security Updates. I'm going to make 4 Software Update
Groups with 100 updates each. I make SUG 1 and create a package in the above mentioned folder with a name similar to the Deployment Name, lets assume Security Update Group 1 4-9-2014.
Overnight the deployment was a success and when I come in the following morning I'm ready to deploy the second software update group. Should I be creating new package for the second SUG or use the first deployment package? What exactly will happen if
I use the first deployment package? Will the data from the first SUG be part of the package or will it only contain date from the second update group?

Update Groups are in no way tied to update packages. Update groups organize updates and are used to assign the updates to clients (via collections). Update packages are simple repositories of the update binaries. Once a client determines that it needs to
install an update assigned to it, it will pull the update from any available update package. The client knows nothing about either update groups or update packages.
So to answer the questions:
Should I be creating new package for the second SUG or use the first deployment package?
- It doesn't really matter. I generally create calendar based update packages for all updates within that period whether it be yearly, semi-annually, quarterly, bi0-annually, whatever. My only rule of thumb here is not let the package get too big because
then you may have issues if the package ever gets corrupted.
What exactly will happen if I use the first deployment package?
- Nothing special as long as the package is available to client it doesn't know or care.
Will the data from the first SUG be part of the package or will it only contain date from the second update group?
- Neither. There is no connection between the two objects. As mentioned, update groups contain the updates (the metadata) and the packages contain the binaries. Both have distinct purposes in the process.
As a final note, you mentioned using "E:\WSUS" -- actually two notes.
- Each update package must have its own unique (sub-)directory.
- Don't use the directory configured as the WSUS update repository -- that is a folder for exclusive WSUS use and bad things will ensue if you try to use it. The package source directories should typically be part of your normal software reposiotry in their
own unique and distinct folders.
Jason | http://blog.configmgrftw.com

WSUS Updates to Available and Required collections - multiple deployment packages?

Hi, I'm trying to follow various documents but cannot find a single unified methodology for how WSUS updates are now supposed to work
I am creating software update Groups and trying to keep them under 1000 updates each as they take 2 hours or so.
So i have a Pre2103, All2013, 2014January to May, 2014 June to September and starting from this month i will do one monthly
My Client base is servers or workstations. I have 2 collections - Available (DCs SQl etc that need manual intervention) and Required (everything else)
So i now create a deployment package for each group - but now i have to do that twice? Once for available collection and once for required collection? Am i missing an easier/better way of doing this?
Once these have all been set up do i then have to deploy them with an ADR? Inject them into the Gold image of my workstations?
I would like the internal WSUS to work exactly like (or as near as can be) to the way microsoft's works. EG if i take a vanilla windows 7 or 8 build and connect it to my network, it gets the GPO, installs the client then goes to SCCM and gets alll the updates
to bring itself up to date without me having to then go back into SCCM and create a specifc deployment of job or to manually send out anything.
Or will this only work when the collection gets updated and is aware of the new computer?
Thanks

OK i'm doing this now. As in the initial message i posted, everything up til 14th October is
done and dusted. I have 4x Software Update groups. Pre2013, All2013,2014JantoMay and
2104JunetoSept
For each of these groups, i created a Folder under the root All Software Updates", filtered
my searches and moved each grou of updates into its own folder for neatness, as well as a
"Superseded and Expired" folder
To deploy each of these i HAD to create a deployment package for each. Only done "Required"
so far so i have 4 Deployment packages.
So, now i am going to step through what i think i need to do to set up updates released on or
after 14/10/2014
I have no software update group or deployment package for October's releases and no ADRs at
all.
Just a list of 232 updates in All Software Updates. I deleted expired and superseded etc.
In this view, there are 64 Assets total. 7 unknown!!? What does this even mean? How do i find
out which are unknown? In the all device list, they are either clients or not. Nothing says
unknown!! Anyway thats for later...
I have 2x collections. WSUS-Available (x23) and WSUS-Required (x41)
None of the 232 updates are downloaded and theres a mixture of required not required and
percent compliant. .
I have a workstation on the domain and have run a windows update (updates managed by my
system administrator) and it says Up to date - and it takes ages.
If i change this to "Check fromo Microsoft" i get 42 important updates and 34 optional
updates available. This is my target scenario to hit from SCCM WSUS
OK here goes.
I select all 232 updates and move them to a folder called 2014October
i go to Automatic Deployment Rules and Create a new one called WSUS2014Oct-Required
select Patch Tuesday Template
Collection is WSUS-Required
create a new software update group
Auto Deploy
Released last 2 weeks - every update classification
Run on a schedule - every second tuesday
Client local time
1hour / as soon as possible
default/default/default
now i need to create a new deployment package. Call it WSUS2014Oct
Point it at sources and a folder called 2104October
Now i choose Download software updates from a location on my network and select the local
drive "E:\WSUS\WSUSContent" folder
So now i have a "Required" ADR and i click Run Now
BUT now i need to do one for the Available group as well. I notice that during the ADR i
cannot select Required or Available.
So i guess i need to suppress reboots on Servers then?
Also if i am using the same deployment package, why do i need to reselct the download
location again? its the same updates
Also, now that i have 2x ADRs the first one i created creates the deployment package and the
second ADR now points to that deployment package too so i now dont have separate packages to
monitor
Also, after running them both i get errors and no software update groups are created. So im
guessing thats the problem as the error is 0x80070002 the file you specificed could not be
found
also get error on the available group saying Auto Deployment Rule download failed
This is ridiculous. Why does creating an ADR allow creation of a SUG if it doesnt work.
Very frustrated

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

SCCM 2012 R2 CU4 - WSUS Sync issues

*EDIT/Update*
I had incorrectly diagnosed this as an issue with CU4. The issue was in fact between Microsoft and WSUS.
The method listed in this thread ended up working for me.
Here is an official KB article for the issue: https://support.microsoft.com/en-us/kb/3058255?wa=wsignin1.0
(I have a small environment - only 1 SCCM server [primary] and 200 servers managed)
I upgraded from CU3 to CU4 last week and I cannot get my WSUS to sync all of the updates for April 2015. I also upgraded my test server and it is syncing fine.
I did some digging yesterday and found out that even tho the site server upgraded (I only have one SCCM server), the SQL update failed because I did not have proper permissions. I've since had a DBA run the update.sql file included with the CU (found at:
%Program Files%\Microsoft Configuration Manager\hotfix\KB3026739)
I restarted my SCCM server again this morning and tried running multiple syncs with Microsoft and it is still pulling in nothing.
I am not getting any errors in WSUS, wsyncmgr.log, WCM.log, or the change.log for wsus. Everything just looks like it attempted to sync - found nothing - then ended the sync successfully.
I had one of the networking guys look at the firewall and he says its getting thru and establishing a connection - but it looks like MS is terminating the connection? I cannot see anything that would indicate this in my logs. Here is what he sent me: http://i.imgur.com/znOvxEN.jpg
Now, to make things even more interesting. In the many many attempts I have made over to the last two days to get SCCM/WSUS to sync April's updates, it has worked in small amounts.... it once expired 16 updates and another time pulled in 2 updates released
on 4/15/15 (but only 2!). I have my sync settings set up exactly like my test server which, again, is working fine.
As always, any help is appreciated!

sounds like there might be a bigger issue with WSUS and Microsoft?
https://social.technet.microsoft.com/Forums/en-US/6dbe893b-39f5-4367-902d-678a2a897b9b/wsus-not-syncronizing-aprils-updates?forum=configmanagersecurity
https://social.technet.microsoft.com/Forums/en-US/a323d2f9-a1ac-48e3-978a-054915c3f1ea/wsus-april-2015-updates-not-synced-from-microsoft?forum=winserverwsus

Software Update Deployment Packages won't distribute to DPs in ConfMgr 2012 R2

After updating System Center 2012 Configuration Manager to R2 we have problems distributing SU Deployment Packages to the distribution point. Some packages work on some DPs, others do not work at all. We are not able to find any pattern.
The Site Server and all DPs run on Windows Server 2008 R2 and the log entries in the smsdpprov.log look always like this:
[798][Wed 02/05/2014 20:00:25]:CContentDefinition::AddFile failed; 0x80070005
[798][Wed 02/05/2014 20:00:25]:Failed to add file 'windows8.1-kb2868626-x64.cab' to content library. Error code: 0X80070005
[798][Wed 02/05/2014 20:00:26]:MoveFile failed for
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[798][Wed 02/05/2014 20:00:26]:FileRename failed; 0x800700b7
[798][Wed 02/05/2014 20:00:26]:CContentDefinition::Finalize failed; 0x800700b7
[798][Wed 02/05/2014 20:00:26]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[798][Wed 02/05/2014 20:00:26]:CreateFileW failed for M:\SMS_DP$\C9A459B18BC7880DB0FCC7FD34212ACB7292B349685997430328F60F7CA9CCF3-ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp
[798][Wed 02/05/2014 20:00:26]:FileOpen failed; 0x80070002
[798][Wed 02/05/2014 20:00:26]:FileGetSize failed; 0x80070002
[798][Wed 02/05/2014 20:00:26]:CFileLibrary::AddFile failed; 0x80070002
[798][Wed 02/05/2014 20:00:26]:GetFileAttributesW failed for M:\SMS_DP$\C9A459B18BC7880DB0FCC7FD34212ACB7292B349685997430328F60F7CA9CCF3-ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp
[798][Wed 02/05/2014 20:00:26]:RemoveFile failed; 0x80070002
[798][Wed 02/05/2014 20:00:26]:
[798][Wed 02/05/2014 20:00:26]:CContentDefinition::AddFile failed; 0x80070002
[798][Wed 02/05/2014 20:00:26]:Failed to add file 'windows8.1-kb2868626-x64.cab' to content library. Error code: 0X80070002
[798][Wed 02/05/2014 20:00:31]:MoveFile failed for
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[798][Wed 02/05/2014 20:00:31]:FileRename failed; 0x800700b7
[798][Wed 02/05/2014 20:00:31]:CContentDefinition::Finalize failed; 0x800700b7
[798][Wed 02/05/2014 20:00:31]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[798][Wed 02/05/2014 20:00:53]:MoveFile failed for
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[798][Wed 02/05/2014 20:00:53]:FileRename failed; 0x800700b7
[798][Wed 02/05/2014 20:00:53]:CContentDefinition::Finalize failed; 0x800700b7
[798][Wed 02/05/2014 20:00:53]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[798][Wed 02/05/2014 20:01:04]:MoveFile failed for
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[798][Wed 02/05/2014 20:01:04]:FileRename failed; 0x800700b7
[798][Wed 02/05/2014 20:01:04]:CContentDefinition::Finalize failed; 0x800700b7
[798][Wed 02/05/2014 20:01:04]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[798][Wed 02/05/2014 20:01:20]:MoveFile failed for
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[798][Wed 02/05/2014 20:01:20]:FileRename failed; 0x800700b7
[798][Wed 02/05/2014 20:01:20]:CContentDefinition::Finalize failed; 0x800700b7
[798][Wed 02/05/2014 20:01:20]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[798][Wed 02/05/2014 20:01:21]:MoveFile failed for
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\M:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[798][Wed 02/05/2014 20:01:21]:FileRename failed; 0x800700b7
[798][Wed 02/05/2014 20:01:21]:CContentDefinition::Finalize failed; 0x800700b7
[798][Wed 02/05/2014 20:01:21]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[798][Wed 02/05/2014 20:01:31]:File is in use: M:\SMS_DP$\C9A459B18BC7880DB0FCC7FD34212ACB7292B349685997430328F60F7CA9CCF3-ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp
[790][Wed 02/05/2014 20:01:36]:File is in use: M:\SMS_DP$\C9A459B18BC7880DB0FCC7FD34212ACB7292B349685997430328F60F7CA9CCF3-ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp
The virus scanner (SCEP) realtime protection has been disabled. No backup agent or anything else is running.
We remove the packages from the DPs, waited until there was no activity in the log files, started distributing to single server, same result.
The DPs worked fine with ConfMgr 2012 and ConfMgr 2012 SP1.
I also looks as if the problem is isolated to SU Packages and does not happen for Applications or Packages.
Does anyone, have any idea?
Thank you
Sascha

Hi,
I already gave Full Permission to everyone to no Change.
I set up a new DP yesterday afternoon. Brandnew Windows Server 2012 R2, nothing on it and I am getting the same Errors (0x800700b7) for every update in the package:
[B4C][Fri 02/07/2014 01:04:26]:MoveFile failed for
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[B4C][Fri 02/07/2014 01:04:26]:FileRename failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:26]:CContentDefinition::Finalize failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:26]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[B4C][Fri 02/07/2014 01:04:27]:MoveFile failed for
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[B4C][Fri 02/07/2014 01:04:27]:FileRename failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:27]:CContentDefinition::Finalize failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:27]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[B4C][Fri 02/07/2014 01:04:30]:MoveFile failed for
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[B4C][Fri 02/07/2014 01:04:30]:FileRename failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:30]:CContentDefinition::Finalize failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:30]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[B4C][Fri 02/07/2014 01:04:32]:MoveFile failed for
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[B4C][Fri 02/07/2014 01:04:32]:FileRename failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:32]:CContentDefinition::Finalize failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:32]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[B4C][Fri 02/07/2014 01:04:53]:MoveFile failed for
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9
[B4C][Fri 02/07/2014 01:04:53]:FileRename failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:53]:CContentDefinition::Finalize failed; 0x800700b7
[B4C][Fri 02/07/2014 01:04:53]:Failed to finalize content 'ba3ba95f-2042-47d4-8219-3fdc6ae93de9' for package 'OPT000A7'. Error code: 0X800700B7
[B4C][Fri 02/07/2014 01:04:54]:MoveFile failed for
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9.OPT000A7.temp to
\\?\C:\SCCMContentLib\DataLib\ba3ba95f-2042-47d4-8219-3fdc6ae93de9

Publish a web deploy package using Deploy tool (msdeploy.exe) and *.PublishSetting file

Hi,
I have created a web deploy package (*.zip) file using Visual studio. Also I have created a website in Azure and got the publish settings file.
Now say, I have only web deploy package and publish settings file. How can I publish this package to Azure website using the command prompt with msdeploy.exe command?
Im trying something like the below:
msdeploy.exe -source:package='D:\WebDeploy\WebProfile.zip' -dest:auto,computerName="http://webdeploytestsite.azurewebsites.net:443/msdeploy.axd?site=WebDeployTestSite",userName="$WebDeployTestSite",password="***********",authtype="Basic",includeAcls="False"
-verb:sync -disableLink:AppPoolExtension -disableLink:ContentExtension -disableLink:CertificateExtension -setParamFile:"D:\WebDeploy\WebProfile.SetParameters.xml"
I'm getting the below error!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Error: Could not complete the request to remote agent URL 'http://webdeploytests
ite.azurewebsites.net:443/msdeploy.axd?site=WebDeployTestSite'.
Error: The underlying connection was closed: An unexpected error occurred on a r
eceive.
Error: Unable to read data from the transport connection: An existing connection
was forcibly closed by the remote host.
Error: An existing connection was forcibly closed by the remote host
Error count: 1.

Hi,
As you are using http:// connection instead of https:// in your connection, check the below provide solutions:
1. In the publish profile window, You need to check the "Allow untrusted certificate" checkbox and the publish should succceed
You may refer following link for more information:
http://msdn.microsoft.com/en-us/library/ff683672.aspx
2. Alternatively, add the –allowUntrusted flag on the command.
And, we always recommend you to use 'PowerShell' to run the commands instead of normal 'CommandPrompt'. Also, you may temporarily disable the Antirvius in your computer for testing purpose and check if it might be blocking the connection.
Regards,
Manu Rekhar

Having issues deploying packages in sccm 2012.

I am having trouble deploying packages to my environment. From what I can tell with the trouble shooting I have done so far. The run with admin rights is not passing through to the clients. If I use a standard software package .exe or .msi (like adobe, MS
Office) the package or application installs fine. However if I use, powershell, vb, .bat, straight command line
MsiExec.exe, They all fail to what seems like it’s not passing the admin right through because I get the UAC prompt and install fails. How do I get the admin rights to work with the other forms of installs so I can push them out silent like I do with .exe and
.msi applications?
Thanks
Tony

So first, you can absolutely use Applications for more than just MSIs; for an example see:
http://blog.configmgrftw.com/configmgr-2012-application-deployment-by-example-user-exe-deployment/
For packages though, the setting is in the program and is on the environment tab in the Run Mode box. Packages merely define the source files, programs define what to do with those source files like the command-line and rights to use.
Jason | http://blog.configmgrftw.com

Re-download a Software Update to a Deployment Package

Hi,
Is there a way to force SCCM to re-download a Software Update into a Deployment Package?
When you download a Software Update (right-click the update and click download), the wizard asks which Deployment Package to add it to (an existing package or create a new one). The update is then downloaded to the UNC path specified in the package
with each update under a different directory (named as a GUID).
My issue is that many of these GUID directories have been accidentally deleted from the UNC path. I know how it happened and that isn't the issue here - I simply want to download the updates again. I would like to right-click my Software Update
group, select "Download", point it to the existing package and have all the updates download again.
When I try and do this, the wizard works fine and it processes each update and says "Success" - however, they are not actually re-downloaded! It's like there is a link somewhere between the update and the package such that it knows it should
already be there and therefore it skips over it without actually checking whether it really does exist.
Is there a way to force SCCM 2012 to ignore the fact that it thinks the update is already there and re-download it? What I really want to do is change the "Downloaded" field from "Yes" to "No" which I think would achieve
what I want to do - I just can't find a way to do it.
What am I missing?
Cheers,
David

I had this same basic problem on a new SCCM 2012 R2 suite I built. I made all the Software Update Groups and Packages and deployed them. They all worked except for the one for Office 2010. Errors said could not process that package, couldn't find a
folder within the source location for the package, and on the DPs the Office 2010 package was there but had 0 for the size of the package.
I deleted the Office 2010 source update folder and package. Then you go to the updates in question, r-click and select deploy (it'll let you do that even if it thinks it's already deployed), create the new package, let the download run, r-click, and edit
membership as needed, and deploy. This worked for me.
Ben JohnsonWY

I have installed Itunes 10.5 on my PC and I have turned photostream on on my Ipad2 and Iphone. The photos sync fine but they are not showing up on my PC. What's the problem?

I have installed Itunes 10.5 on my PC and I have turned photostream on on my Ipad2 and Iphone. The photos sync fine but they are not showing up on my PC. What's the problem? I can see my photos on my ipad and Iphone. I want to be able to see them on my PC when I take pictures from my Iphone and Ipad. How do I see Photostream on my PC?

You have to install the iCloud control panel for windows, then sign in with you apple ID, and check what you want to sync.
link: http://support.apple.com/kb/DL1455

HT2729 i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer. is this related to not having the proper itunes version vs ios? I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...

i downloaded 3 songs to my pc and sync'd my ipod and the songs do not tranfer. is this related to not having the proper itunes version vs ios? I cannot get the songs to sync, but I can move other songs to different playlists and they sync fine...any ideas what's wrong?

Hi Dennis!
I have a couple of steps for you to try in order to get those songs transferred to your iPod touch. First, make sure all of your software is updated with the latest versions. If the songs were downloaded from iTunes, you will also want to delete the songs from your library and then download them again from the list of past purchases on your iTunes account. An article about doing that can be found here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you try a sync after those two steps and are still seeing the issue, then I would like you to try syncing the iPod by setting it to manually manage. An article outlining more information on manually managing your iPod sync can be found here:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
If you are still having issues after that, I have another article that can outline some other reasons why your songs may not transfer to your iPod, and it can be found here:
Some songs in iTunes won't copy to iPod
http://support.apple.com/kb/TS1420
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now on my device and no matter how many ways I try its not worked

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.

I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

I have not been able to sync my mail with iCloud on my MacBookPro (Lion OS). Everything else has been syncing fine for the past two months, but when I go to System Pref/iCloud/and try to check Mail, it asks me to choose an iCloud email address. When I

I have not been able to sync my mail with iCloud on my MacBookPro (Lion OS). Everything else has been syncing fine for the past two months, but when I go to System Pref/iCloud/and try to check Mail, it asks me to choose an iCloud email address. When I put in my regular @me.com email, it says that address already exists (of course it does - it's mine!) and wants me to choose another one. But I want it to sync with my stuff. What can I do? I haven't been able to find help anywhere online... Thanks!

You should have signed in with that address in the first place, but there is a workaround: go to System preferences>Mail, Contacts@ Calendars and add your @me.com address as an account there.

My notes won't sync from a google account with the macbook air, but they sync fine on the ipad air and iphone 4s??

I keep getting this message when I try to sync my notes in a google account this message keeps popping up... mail couldn't discover the account settings. My mail shows up, contacts and calendar sync fine, and notes from other emails sync fine. But this one email will NOT let me sync?????? Any suggestions?

Go to Settings>Mail Contacts Calendars
Scroll down to Mail section and find Show. Selecting something different here may solve your problem. Mine says "50 Recent Messages". You may need more.

Deployment Packages Empty, WSUS syncs fine

Similar Messages

Maybe you are looking for