Deployment Status - In progress - Successfully installed updates
Patches have recently been deployed to our workstations and I am getting the following results.
Can anyone explain why I get the "Successfully installed updates" under In Progress, yet when I look under Compliant the machines are not listed. Does this mean that they have received some of the packages in the deployment but not all?
I am confused because if I run the report "Computers in a specific compliance state for an update group (secondary), then the machines listed under Successfully installed, appear in the list, so to me that suggests they are compliant???
Notice the "last status time". Information in the console almost always lags behind the actual state of clients and deployments. This information is summarized on a periodic basis. Reports are always your best source of up-to-date and accurate info.
Jason | http://blog.configmgrftw.com
Similar Messages
-
Deployment Status In Progress - Waiting for Content?
Hi,
I have an application (language pack) I am trying to deploy to some clients and only about 78 out of 200 have a status of success. The number hasn't improved in the last few days. What would be the best way to get the rest installed? Can I delete the deployment
and deploy again? If I do this, will it uninstall it on the successful clients? Or is there a way to re-deploy? It just seems to be not improving at all and would like to get it pushed out asap. Thank you very muchHave you added an IPv6 boundary for the Direct Access clients and added to a boundary group for content location?
See how to do that here:
http://www.gerryhampsoncm.blogspot.ie/2014/10/configmgr-2012-sccm-2012-all-boundary.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Update Groups Not Providing Deployment Status
Software Updates Groups for Windows 7 were created on a monthly basis from November 2013 to June 2014. Each of these deployments are having issues reporting any data in the "Deployments" Section of SCCM.
Patch groups created prior to November 2013, and Past June 2014 appear to be fine, and are distributing content and installing updates with ANY issue.
Upon recreating the "broken" patch groups - nothing appears to change. I've went as far as to deleting the content, and renaming everything, recreating all the groups, and still no luck.
Any suggestions regarding why these groups may fail to provide any deployment status?Hi,
Have these updates been installed on clients? What's the status in the Deployments section? Please check the deployment status from software update reports.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi
I have challaged for deployment of microsoft critical patches to client machine with the help of sccm. I have been done all configuration formalities, although previous months has been deployed successfully with any difficulties.
But This month have some issue is being running, once i was deploying the packages of microsoft critical update but members of collection is showing unknow client tab which comes in monitoring--> deployments status windows. until deadline
to be completed. Nither provide any errors or completed status, progress status.
Please guide to resolve the issue,
if you need more clarification, kindly let me know.
Md Ehteshamuddin Khan
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Take a look at the SU superflows, they will help you troubleshot this issue.
http://technet.microsoft.com/en-us/library/ff385001.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Deployment status shows stuck in progress, no advertisement or package ID in any client log
I am trying to deploy an applications to a remote machine. The application is distributed to the DPs and has been successfully deployed to at least one computer on the LAN. The deployment status for the machine is stuck on the In Progress
tab, Category as In Progress.
The content has not downloaded to ccmcache, and I can't find any reference to the application or package ID in any of the logs. I don't know what to look at next that might help. Any help is much appreciated! Thanks,
JeffHow about locationservices.log? It runs through this every 10 minutes, which is both more often and quite different from what I see in my laptop's locationservices.log (granted I'm on the LAN).
Refreshed security settings over AD
LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
No security settings update detected. LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Retrieved MP [oursccmprimary] from Registry LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Attempting to retrieve lookup MP(s) from AD LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Lookup Management Points from AD: LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'N'
LocationServices
12/3/2014 3:50:06 PM
5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'N'
LocationServices
12/3/2014 3:50:06 PM
5160 (0x1428)
Retrieved lookup MP(s) from AD
LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Attempting to retrieve default management points from lookup MP(s) via HTTPS
LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:06 PM 5160 (0x1428)
Default Management Points from MP: LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
LSUpdateInternetManagementPoints LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Internet Management Points from assigned MP:
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
LSUpdateInternetManagementPoints: Successfully refreshed internet MPs from MP oursccmsecondary.ourdomain.lan.
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Persisting the default management points in WMI
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Default Management Points from MP: LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Name: 'oursccmprimary.ourdomain.lan' HTTPS: 'N' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Name: 'oursccmsecondary.ourdomain.lan' HTTPS: 'Y' ForestTrust: 'Y'
LocationServices
12/3/2014 3:50:07 PM
5160 (0x1428)
Persisted Default Management Point Locations locally
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Attempting to retrieve local MPs from the assigned MP LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428)
Current AD site of machine is OurADsite
LocationServices
12/3/2014 3:50:07 PM 5160 (0x1428) -
Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.
We don't know what Apple plans on doing to change this (and it may not be just Apple but more likely the publishers, since Apple would, of course, do whatever it could to maximize sales/profits). Right now you can only read Apple books on mobile devices. Sure, buy them from Amazon if you want to read them on the computer. We don't work for Apple so we're pretty impartial on this kind of advice.
You might also see what your library can offer. My wife can browse the county library from her iPhone, borrow e-versions, and read books on it too. Free! -
MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it. -
I am trying to install update 11.0.06 for my Adobe Acrobat XI Pro, but without success multiple times.Get error 1603 each time. I have tried disabling my antivirus software without success. I have looked for solutions to error 1603, and have tried what it suggests (empty temp files in Windows, etc.), also without success.There is nothing that mentions Window 8 or 8.1 operating system, though. Is this the issue? Please help.
Hi Dawn,
We might want to have a look at the install logs to determine the cause.
Please try the following basic steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave -
Good day community people,
I've successfully installed the final release of OS X Yosemite 10.10 on my iMac 21.5" (Late 2012). When I open the Mac App Store to check for updates, the updates prompt me to update OS X Yosemite Beta 2 & OS X Beta Recovery Update 1.0. The question here is, I already installed the latest release on my iMac why how come App Store still stated I need to update to Beta version?
More info on my previous state before installing the final release. I was a Open Public Beta tester of OS X Yosemite but I didn't install it on my iMac, therefore my iMac is upgraded from OS X Mavericks. So by right my procedure is correct. Please assist. Thank you.It seems no one could answer my question here but I found the solution. There's a bug even after installing the final release that caused the Mac App Store keep on prompting Yosemite Public Beta updates. The only solution is re-download the final version again from Mac App Store and re-install on top of current installation without formatting or erase the hard drive.
And you're welcome -
I cannot successfully install macbookpro updates
Hi there,
I am running on 10.6.8 currently, and have had no problem in the past downloading updates for my mac through the Software Update until now. I currently have 14 items to download (itunes, imovie, quicktime, etc.), and when I click Install Now, it tells me I must restart my computer when the items are finished installing. However, as soon as I click install, the computer goes to the defult purple screen and it asks me to login and put in my password. other options are to restart, or turn off. i have tried all three, and they all do the same thing - nothing. my computer will restart and reopen the desk top but no changes will be made, and all 14 items are still there waiting to download. my internet is an airport and it is working properly. Please help, how can I get Software Update to work properly?
Thank you.
PS:
- I have checked there is no proxy preventing downloads.Run software update, write down what applications and version it says you need. Go to Apple support, in the search window type in one of the updates name and version, when it takes you that page download it, set your browser to download to the desktop (this make it a little easier). Do these one at a time, after the download do the install, after a successful install you can trash the installer. Yes this a pain, but I always do manual installs, as it seems to be more reliable. If you are connecting wireless there could be something interfering and causing a corruption, you might want to connect to your router via ethernet, this has happened to me before, hence doing it this way eliminates those issues. I hope this helps you.
You might want to do a permissions repair, this could be causing a problem. Go to utilities>disk utility, highlight your user disk (usually Macintosh HD, or whatever you may have named it, then click Repair Permissions. -
I am running the latest OS version and uploaded the latest version of Aperture 3.1.2 all successfully installed. I have all my photos (say 12000 files) stored on a RAID WD (MyBook) external hard-drive and I assume that that has the latest software update Wd 2.25. I have previously had problems with Aperture's external referencing - which drops out frustratingly, I was in the middle of a major import of photos when the spinning rainbow ball appeared. I am now unable to open Aperture.
I have tried rebooting to no change.
Help please?Colin-
Thanks for the detailed info. One additional question, how full is each hard drive? The internal and external drives' % full.
Step one is to change the import workflow. Even though lots of manuals inappropriately lead folks in that direction, one should never import directly into Aperture or any other images management app. Instead, in this exact order:
• Restart the Mini (to clear possible memory leaks of the limiting 2-GB of RAM).
• Create a folder ("abc") for the incoming images. Since you are on a Mini you will want to be referencing Masters with the Library on the Mini's hard drive and the Masters on your external RAID array. The abc folder should be created on the RAID.
• Connect a card reader with the camera card in it. The camera card should show on the desktop. If it does not show, restart the Mini with the reader and card still plugged in. You can of course use the camera directly in this step, but I do not recommend it. Obviously cameras like the iPad do require direct camera-to-computer uploading.
• Drag the contents of the card's image folder(s) to the abc folder that you previously created on the hard drive.
• Review the abc folder contents to be sure they all copied properly.
• Software-eject the camera card.
• Physically disconnect the camera card reader from the Mini. This step is important to help avoid all-too-common human error.
• Again review the abc folder contents to be sure they are indeed all there (because stuff happens sometimes...).
• Back up the abc folder contents on to another drive.
• Review the files on the backup to be sure they all copied properly.
• At any time after but not before the previous step you can reformat the camera card in-camera. Do not delete images on the card using the computer.
• Start Aperture and only have Aperture running (due to your limited 2 GB RAM).
• Import the images from folder abc into Aperture, selecting "Store Files: In their current location" on the right-hand side of the import window.
Some generic advice I posted in another thread:
Aperture is a heavy pro graphics app that is very demanding of hardware. Your Mac's CPU, GPU, i/o and RAM are all limiting to Aperture so we need to do what we can to optimize. Some steps:
• Set Previews to only be built manually, and only tell Aperture to build Previews when you are not otherwise editing in Aperture. I suggest setting the size of Previews to be the pixel dimensions of your display.
• Keep the internal drive underfilled for speed, which sooner or later usually requires using a Referenced-Masters-Library with Masters on external drives. Back up originals before importing into Aperture or any other images app.
• The Aperture Library should be on an internal drive.
• Turn off Share Previews with iLife and iWork.
• Remember that HDs slow as they fill and keep the internal drive underfilled. Approx. 70% full _maximum_ is a good guideline.
• If page outs increase significantly during operation, max out RAM and/or try to run Aperture by itself. On my C2D MBP with its max of 3 GB RAM I always did a restart prior to a heavy Aperture session to clear any memory leaks and make sure no other apps were open. Browsers in particular will often suck RAM Aperture would otherwise be using.
IMO all Aperture users who can should routinely bump RAM to at least 8 GB.
• Some users have observed that it can take a new Aperture installation time (weeks) to stabilize on slow computers. So do not panic; and allow Aperture to continue background work by not fully shutting down the computer.
HTH
-Allen Wicks -
I tried to update iTunes with the latest version and I got a message saying that - MSVCR80.dll was not installed. I think I successfully installed that through an online help website but I now get R6034 - C\Program Files(x86)\iTunes\iTunes.exe
Hello Bignige52,
The following article provides steps and information that can help get iTunes updated and working.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
was asked to update itunes last week and since then itunes won't open, un-installed it and followed the necessary steps then tryed to install it from scratch but still no luck. It says it has been successfully installed, but no sign of it on my computer.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
My security update history says that Firefox 3.6.8 was successfully installed on Dec. 31, 1969. ????
Firefox Security Updates 3.6.8/3.6.7/3.6.6/3.6.4 all say they the update was successfully installed on Wednesday, December 31, 1969 7:00:00. One of the #s is (20100722155716).
Correct.
-
Need help to check the software update deployment status before restart the VM
Hello,
I'm just trying to automate the windows patch deployment for several VM's, I build the entire logic like below,
Deploy software update --> wait for sometime-->Restart --> Check deployment status(collection = iscomplaint) -->stop
I know here I'm missing the logic of not checking the patch deployment status before restarting, Can someone help here plz?
Regards,
JulieHello
you can configure a loop for your Activity " Get deployment status(filtered the collection name " until status is succeeded, failed with an embedded loop: http://technet.microsoft.com/en-us/library/hh403826.aspx
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu
Maybe you are looking for
-
Hi, Is there a key combination to delete a selected file/folder from the trash? I have looked online and can't find any solution. The closest I have found is to use rm command in terminal, is there a way of adding to the right click menu? Thanks
-
XML: SAX vs. DOM vs. jDom etc.
Is there any reason to use SAX or DOM? I mean is jdom always the best choice? Some information?
-
Java.lang.NullPointerException Patch Policy Enforcement
Zenworks 11sp3 on Sles11sp3 x64 I changed following settings in the Patch Policy Enforcement configuration Page: Schedule from Default to Schedule Restric Duatation schedule type patch policy reboot behavior to enabled change description text When no
-
Hi, I have a macbook air and my built in iSight camera is now not recognised by any applicatio...any ideas????
-
Recent Update 10.8.1 seems to have disrupted my "Magic Mouse" connections to both my MacBook Pro and my iMac compters. Magic Mouse will connect as usual, then disconnects after a minute or two but will reconnect after a click or two. Have tried the