Deployment Utility - log file errors/warnings not clear
Hi,
I'm doing my first deployment and have few questions:
1) I tried to deploy ONLY the TS user directories. I checked the 'Deploy Files in TestStand User Directories' option and did not check 'Install TestStand Engine' since I deploy it into a system with TS3.0+CVI7.0 software(same as the source).
The process was successful by I get the following warnings in the log file.
Starting Log.
Building...
5:47 PM
An installer is being created.
The installer is finished
The build process is done.
5:48 PM
Warning: You may need to add any sequence files referenced by the following expressions:
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Single Pass', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
+++++++++++++++++++++++++++++++++++++++
What does it mean? What to do about it?
2) The utility does not include the cfg/TypePalettes where I have a my own file.
Is there a reason to it? Do I need to include it manually?
3) When I included workspace in the utility I get the following errors:
Starting Log.
Processing Workspace...
Done processing workspace file
+++++++++++++++++++++++++++++++++++++++
Processing Workspace...
Done processing workspace file
Building...
6:08 PM
Error could not open LabVIEW
Distributing VIs requires the LabVIEW Development System
Class not registered
in TestStand - Get LV Reference.vi->TestStand - Package VIs.vi->TestStand - Build.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
An installer was not created due to an error
The build process is done.
6:08 PM
Error Code:-2147221164
Class not registered
in TestStand - Get LV Reference.vi->TestStand - Package VIs.vi->TestStand - Build.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
+++++++++++++++++++++++++++++++++++++++
In order to eliminate the problem source I un-checked the files presented by the 'Analyze Source Files' until all of them are un-checked. Even in that case I get the error message.
What does the message mean?
What to do about it?
I don't use any LV in my system!!!!!
Thanks and my apology for the long message
Rafi
Hi Rafi,
On #1 the warnings appear whenever you have an expression that specifies a sequence file because many expressions are not valid until runtime, you can ignore it as long as ALL sequences that expression may evaluate to are included in the Workspace.
>2) The utility does not include the cfg/TypePalettes where I have a my own file.
>Is there a reason to it? Do I need to include it manually?
No it does not include it because it is not needed unless you plan to edit on the deployed sequence (generally not recommended). If you add a custom type to a sequence the sequence file will have a copy of the type. You can include the types palettes manually in the workspace if desired.
>3) When I included workspace in the utility I get the following errors:
>What does the message mean?
The deployment utility thinks you have a VI to deploy, it is trying to load LabVIEW and failing because LabVIEW is not installed.
>What to do about it? I don't use any LV in my system!!!!!
Somewhere there is a .vi or .llb in the system. Find the VI(s) and uncheck them. I did find a bug that the deployment utility caches the flag indicating if a VI is present, but it is easily worked around: Save a tsd file, Press the New button and then reload the tsd.
-Rick Francis
Similar Messages
-
SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.
Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com -
"recover database until cancel" asks for archive log file that do not exist
Hello,
Oracle Release : Oracle 10.2.0.2.0
Last week we performed, a restore and then an Oracle recovery using the recover database until cancel command. (we didn't use backup control files) .It worked fine and we able to restart the SAP instances. However, I still have questions about Oracle behaviour using this command.
First we restored, an online backup.
We tried to restart the database, but got ORA-01113,ORA-01110 errors :
sr3usr.data1 needed media recovery.
Then we performed the recovery :
According Oracel documentation, "recover database until cancel recovery" proceeds by prompting you with the suggested filenames of archived redo log files.
The probleme is it prompts for archive log file that do not exist.
As you can see below, it asked for SMAarch1_10420_610186861.dbf that has never been created. Therefore, I cancelled manually the recovery, and restarted the database. We never got the message "media recovery complete"
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10417_61018686
Fri Sep 7 14:09:45 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10418_610186861.dbf'
Fri Sep 7 14:09:45 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10418_610186861.dbf
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10418_61018686
Fri Sep 7 14:10:03 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10419_610186861.dbf'
Fri Sep 7 14:10:03 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10419_610186861.dbf
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10419_61018686
Fri Sep 7 14:10:13 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf'
Fri Sep 7 14:10:13 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf
Errors with log /oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf
ORA-308 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10420_61018686
Fri Sep 7 14:15:19 2007
ALTER DATABASE RECOVER CANCEL
Fri Sep 7 14:15:20 2007
ORA-1013 signalled during: ALTER DATABASE RECOVER CANCEL ...
Fri Sep 7 14:15:40 2007
Shutting down instance: further logons disabled
When restaring the database we could see that, a recovery of online redo log has been performed automatically, is it the normal behaviour of a recovery using "recover database until cancel" command ?
Started redo application at
Thread 1: logseq 10416, block 482
Fri Sep 7 14:24:55 2007
Recovery of Online Redo Log: Thread 1 Group 4 Seq 10416 Reading mem 0
Mem# 0 errs 0: /oracle/SMA/origlogB/log_g14m1.dbf
Mem# 1 errs 0: /oracle/SMA/mirrlogB/log_g14m2.dbf
Fri Sep 7 14:24:55 2007
Completed redo application
Fri Sep 7 14:24:55 2007
Completed crash recovery at
Thread 1: logseq 10416, block 525, scn 105140074
0 data blocks read, 0 data blocks written, 43 redo blocks read
Thank you very much for your help.
Frod.Hi,
Let me answer your query.
=======================
Your question: While performing the recovery, is it possible to locate which online redolog is needed, and then to apply the changes in these logs
1. When you have current controlfile and need complete data (no data loss),
then do not go for until cancel recovery.
2. Oracle will apply all the redologs (including current redolog) while recovery
process is on.
3. During the recovery you need to have all the redologs which are listed in the view V$RECOVERY_LOG and all the unarchived and current redolog. By querying V$RECOVERY_LOG you can find out about the redologs required.
4. If the required sequence is not there in the archive destination, and if recovery process asks for that sequence you can query V$LOG to see whether requested sequence is part of the online redologs. If yes you can mention the path of the online redolog to complete the recovery.
Hope this information helps.
Regards,
Madhukar -
(Forte-users) log file error
Hi,
We are getting this error in our log files, when we run our application.(We
are running interpreted)
Any help will be appreciated to solve this problem.
Thanks
Carole
Attached to manager for node FORTE_DEV.
aud Wed May 10 08:58:28 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
aud Wed May 10 10:01:12 : Shutting down partition as requested.
aud Wed May 10 10:01:13 : Unloaded partition CSaver_cl169_Part1-router.
aud Wed May 10 10:01:15 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
SYSTEM ERROR: Attempt to send from a partition
(A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1) that no longer
exists.
Class: qqsp_DistAccessException
Error #: [601, 111]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Wed May 10 10:01:40
Distributed method called: qqdo_NsServerProxy.FindObject (object
name
Unnamed) from partition "CSaver_cl169_Part1-router", (partitionId
=
A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId =
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev
Exception occurred (locally) on partition
"CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1,
taskId
= [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htmOne thing to look at is this message: Check that the environment manager is
installed at that location. If it is, then check to be sure that there are
enough system resources available to support this partition.
Particularly the enough systems resources part of it. I've seen this message
before, but it's been awhile, & the problem was we didn't have enough
virtual memory on the server & also we needed more tcp/ip connections. If I
remember right our Unix guy had to change some of the configuration
parameters in the kernel on the server.
Hope this helps.
-----Original Message-----
From: MacDonald, Carole [mailto:CMacDonaldnbs.co.za]
Sent: Thursday, May 11, 2000 3:53 AM
To: forte-userslists.xpedior.com
Subject: (Forte-users) log file error
Hi,
We are getting this error in our log files, when we run our application.(We
are running interpreted)
Any help will be appreciated to solve this problem.
Thanks
Carole
Attached to manager for node FORTE_DEV.
aud Wed May 10 08:58:28 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
aud Wed May 10 10:01:12 : Shutting down partition as requested.
aud Wed May 10 10:01:13 : Unloaded partition CSaver_cl169_Part1-router.
aud Wed May 10 10:01:15 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
SYSTEM ERROR: Attempt to send from a partition
(A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1) that no longer
exists.
Class: qqsp_DistAccessException
Error #: [601, 111]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Wed May 10 10:01:40
Distributed method called: qqdo_NsServerProxy.FindObject (object
name
Unnamed) from partition "CSaver_cl169_Part1-router", (partitionId
=
A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId =
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev
Exception occurred (locally) on partition
"CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1,
taskId
= [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htm
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
Log file switch (checkpoint not complete)
HI,
I am using Oracle 9.2 on rhel
IN the statspack report I am getting one of the event I.e log file switch (checkpoint not complete).Statspack duration is about 1.5 hrs...any suggestion
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.97 Redo NoWait %: 98.31
Buffer Hit %: 95.84 In-memory Sort %: 100.00
Library Hit %: 99.57 Soft Parse %: 98.51
Execute to Parse %: 72.70 Latch Hit %: 99.71
Parse CPU to Parse Elapsd %: 53.15 % Non-Parse CPU: 99.10
Shared Pool Statistics Begin End
Memory Usage %: 93.66 93.74
% SQL with executions>1: 60.41 60.94
% Memory for SQL w/exec>1: 60.89 61.66
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file switch (checkpoint incomplete) 35,936 35,100 42.81
enqueue 6,144 16,684 20.35
buffer busy waits 17,190 13,346 16.28
wait for a undo record 51,967 4,931 6.01
ARCH wait on SENDREQ 877 4,813 5.87
-------------------------------------------------------------Please find the whole stats[pack report
{code}
STATSPACK report for
DB Name DB Id Instance Inst Num Release Cluster Host
ICAI 1504443695 icai 1 9.2.0.8.0 NO icaidb.icai.
org
Snap Id Snap Time Sessions Curs/Sess Comment
Begin Snap: 70 04-Aug-10 14:27:14 162 34.7
End Snap: 73 04-Aug-10 15:30:43 254 55.4
Elapsed: 63.48 (mins)
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 4,928M Std Block Size: 8K
Shared Pool Size: 1,312M Log Buffer: 1,024K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 96,260.76 53,769.94
Logical reads: 13,998.20 7,819.20
Block changes: 1,227.83 685.85
Physical reads: 592.13 330.76
Physical writes: 19.93 11.13
User calls: 313.12 174.91
Parses: 31.41 17.55
Hard parses: 0.47 0.26
Sorts: 11.61 6.49
Logons: 0.11 0.06
Executes: 115.04 64.26
Transactions: 1.79
% Blocks changed per Read: 8.77 Recursive Call %: 26.28
Rollback per transaction %: 5.43 Rows per Sort: 472.17
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.97 Redo NoWait %: 98.31
Buffer Hit %: 95.84 In-memory Sort %: 100.00
Library Hit %: 99.57 Soft Parse %: 98.51
Execute to Parse %: 72.70 Latch Hit %: 99.71
Parse CPU to Parse Elapsd %: 53.15 % Non-Parse CPU: 99.10
Shared Pool Statistics Begin End
Memory Usage %: 93.66 93.74
% SQL with executions>1: 60.41 60.94
% Memory for SQL w/exec>1: 60.89 61.66
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
log file switch (checkpoint incomplete) 35,936 35,100 42.81
enqueue 6,144 16,684 20.35
buffer busy waits 17,190 13,346 16.28
wait for a undo record 51,967 4,931 6.01
ARCH wait on SENDREQ 877 4,813 5.87
Wait Events for DB: ICAI Instance: icai Snaps: 70 -73
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file switch (checkpoint 35,936 35,886 35,100 977 5.3
enqueue 6,144 5,660 16,684 2716 0.9
buffer busy waits 17,190 5,325 13,346 776 2.5
wait for a undo record 51,967 49,137 4,931 95 7.6
ARCH wait on SENDREQ 877 0 4,813 5489 0.1
log file switch (archiving n 3,705 3,653 3,600 972 0.5
db file sequential read 600,718 0 621 1 88.1
log file sync 6,826 140 561 82 1.0
log file parallel write 7,052 0 421 60 1.0
log buffer space 1,361 16 230 169 0.2
db file scattered read 289,115 0 212 1 42.4
switch logfile command 116 23 160 1377 0.0
wait for stopper event to be 1,924 1,111 123 64 0.3
control file parallel write 1,355 0 63 46 0.2
PX Deq: Txn Recovery Start 1,253 0 36 29 0.2
SQL*Net break/reset to clien 560 0 20 36 0.1
local write wait 18 15 17 918 0.0
log file switch completion 21 7 9 442 0.0
control file sequential read 237,021 0 6 0 34.8
log file sequential read 437 0 6 13 0.1
BFILE get length 297 0 2 7 0.0
latch free 485 67 2 4 0.1
BFILE read 1,023 0 1 1 0.2
log file single write 18 0 0 16 0.0
SQL*Net more data to client 13,785 0 0 0 2.0
process startup 10 0 0 9 0.0
control file single write 10 0 0 4 0.0
row cache lock 34 0 0 0 0.0
db file single write 1 0 0 14 0.0
LGWR wait for redo copy 89 0 0 0 0.0
PX Deq: Signal ACK 3 0 0 4 0.0
PX Deq: Join ACK 5 0 0 1 0.0
BFILE open 106 0 0 0 0.0
db file parallel read 25 0 0 0 0.0
async disk IO 1,383 0 0 0 0.2
db file parallel write 255 0 0 0 0.0
BFILE internal seek 1,023 0 0 0 0.2
direct path read 843 0 0 0 0.1
BFILE closure 106 0 0 0 0.0
undo segment extension 844 844 0 0 0.1
direct path write 96 0 0 0 0.0
SQL*Net message from client 1,188,764 0 445,926 375 174.3
virtual circuit status 125 125 3,660 29277 0.0
wakeup time manager 86 86 2,451 28506 0.0
PX Idle Wait 755 750 1,466 1941 0.1
jobq slave wait 60 60 176 2930 0.0
SQL*Net more data from clien 3,035 0 1 0 0.4
SQL*Net message to client 1,188,882 0 1 0 174.3
Wait Events for DB: ICAI Instance: icai Snaps: 70 -73
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
Background Wait Events for DB: ICAI Instance: icai Snaps: 70 -73
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
ARCH wait on SENDREQ 877 0 4,813 5489 0.1
buffer busy waits 2,164 1,176 1,184 547 0.3
log file parallel write 7,052 0 421 60 1.0
wait for stopper event to be 1,924 1,111 123 64 0.3
control file parallel write 1,301 0 57 44 0.2
enqueue 393 0 10 26 0.1
control file sequential read 234,452 0 6 0 34.4
log file sequential read 431 0 6 13 0.1
db file scattered read 124 0 1 10 0.0
log buffer space 40 0 1 13 0.0
log file single write 15 0 0 20 0.0
db file sequential read 20 0 0 9 0.0
process startup 7 0 0 8 0.0
latch free 19 3 0 2 0.0
LGWR wait for redo copy 89 0 0 0 0.0
PX Deq: Signal ACK 3 0 0 4 0.0
PX Deq: Join ACK 5 0 0 1 0.0
db file parallel write 255 0 0 0 0.0
async disk IO 793 0 0 0 0.1
rdbms ipc reply 1 0 0 0 0.0
direct path read 88 0 0 0 0.0
direct path write 88 0 0 0 0.0
rdbms ipc message 50,357 3,296 16,467 327 7.4
pmon timer 1,271 1,251 3,653 2874 0.2
smon timer 64 0 2,302 35963 0.0
SQL ordered by Gets for DB: ICAI Instance: icai Snaps: 70 -73
-> End Buffer Gets Threshold: 10000
-> Note that resources reported for PL/SQL includes the resources used by
all SQL statements called within the PL/SQL code. As individual SQL
statements are also reported, it is possible and valid for the summed
total % to exceed 100
CPU Elapsd
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
5,652,833 456 12,396.6 10.6 20.04 1062.67 285625578
SELECT /*+ INDEX(OT_DAK_ENTRY_DETL IDM_DED_NAME) */DEH_TXN_CODE
,DEH_NO FROM OT_DAK_ENTRY_HEAD,OT_DAK_ENTRY_DETL WHERE DEH_SY
S_ID = DED_DEH_SYS_ID AND TRUNC(DEH_APPLICATION_DT) = :b1 AND
DED_DAK_CODE = :b2 AND DED_NAME LIKE LTRIM(RTRIM(:b3)) || '%'
AND NVL(DED_INSTR_NO,'XXXXXX') = NVL(:b4,'XXXXXX') AND TRUNC(
5,096,348 189 26,964.8 9.6 23.64 23.25 1772835295
select decode(level,1,'',2,' ',3,' ',4,' ',5,'
', ' ') || decode(:1,'ENG',menu_option_desc,menu_opt
ion_desc_bl) "OPTION", menu_parent_id "PARENT", menu_action_type
"TYPE",menu_action "ACTION", decode(level,1,'',2,' ',3,' ',4,'
',5,' ', ' ') ||decode(menu_action_type, 'M', '+', 'o'
4,894,185 96 50,981.1 9.2 7.89 10.11 23088203
INSERT INTO OT_MEM_FEE_COL_DETL(MFCD_FEE_TYPE,MFCD_CONDON_FEE_YN
,MFCD_EXCESS_USED_YN,MFCD_CONDN_CODE,MFCD_PM_CODE,MFCD_CURR_CODE
,MFCD_INSTR_NO,MFCD_INSTR_DT,MFCD_AMT,MFCD_BANK_CODE,MFCD_INSTR_
TYPE,MFCD_BRANCH,MFCD_COLLECTION,MFCD_FM_DT,MFCD_TO_DT,MFCD_RES_
CODE,MFCD_CR_UID,MFCD_CR_DT,MFCD_UPD_UID,MFCD_UPD_DT,MFCD_CONDON
4,885,684 152 32,142.7 9.2 7.64 8.87 1007886847
SELECT MIN(MFCH_NO) FROM OT_MEM_FEE_COL_HEAD, OT_MEM_FEE_COL_DET
L WHERE MFCH_SYS_ID = MFCD_MFCH_SYS_ID AND MFCH_REF_NO = :B4 AND
MFCH_REF_TXN_CODE = :B3 AND MFCD_INSTR_NO = :B2 AND MFCD_BANK_C
ODE = :B1 AND MFCD_AMT > 0
2,680,356 446 6,009.8 5.0 95.57 125.49 197211170
SELECT /*+ INDEX(OT_STUDENT_FEE_COL_IPCC_HEAD OT_STUDENT_FEE_COL
IPCCHEAD_UK01) */SFCH_SYS_ID,SFCH_DT,DECODE(NVL(SSTN_SRN,SFCH
TEMPREF_NO),SSTN_SRN, NULL ,SFCH_TEMP_REF_NO) SFCH_TEMP_REF_NO
,NVL(SFCH_STUD_SRN,SSTN_SRN) SFCH_STUD_SRN,SFCH_COURSE_CODE,SFCH
SCHEMECODE,SFCH_EXMP_STUD_YN,SFCH_EXMP_STUD_REASON,DEH_APPLICA
2,288,204 1 2,288,204.0 4.3 54.31 59.36 3103356680
DECLARE job BINARY_INTEGER := :job; next_date DATE := :mydate;
broken BOOLEAN := FALSE; BEGIN BEGIN /*Quest SOO PPCM job */ qu
est_ppcm_snapshot_pkg.take_snapshot; END; :mydate := next_date;
IF broken THEN :b := 1; ELSE :b := 0; END IF; END;
2,253,877 1 2,253,877.0 4.2 52.70 56.21 579012758
DELETE FROM QUEST_PPCM_SQL_TEXT TXT WHERE INSTANCE_ID >= 0 AND N
OT EXISTS (SELECT 1 FROM QUEST_PPCM_SQL_SNAPSHOT SNAP WHERE SNAP
.SNAPSHOT_ID > 0 AND SNAP.INSTANCE_ID= TXT.INSTANCE_ID AND SNAP.
SQL_ID = TXT.SQL_ID)
1,656,006 24 69,000.3 3.1 10.00 24.26 4081782417
SELECT PISH_COURSE_CODE FROM OV_STU_PAYINSLIP_IPCC_DTL WHERE
PISH_BANK_CODE = :b1 AND PISH_NO BETWEEN :b2 AND :b3 AND PISD_
CURR_CODE = :b4 AND PISH_REGION_CODE = :b5 ORDER BY 1
SQL ordered by Gets for DB: ICAI Instance: icai Snaps: 70 -73
-> End Buffer Gets Threshold: 10000
-> Note that resources reported for PL/SQL includes the resources used by
all SQL statements called within the PL/SQL code. As individual SQL
statements are also reported, it is possible and valid for the summed
total % to exceed 100
CPU Elapsd
Buffer Gets Executions Gets per Exec %Total Time (s) Time (s) Hash Value
1,567,946 12 130,662.2 2.9 21.99 47.39 1585476974
SELECT NVL(TO_CHAR(A.DEH_APPLICATION_DT,'DD/MM/RRRR'), NULL ),NV
L(TO_CHAR(A.DEH_DT,'DD/MM/RRRR'), NULL ) FROM OT_DAK_ENTRY_HEA
D A,OT_DAK_ENTRY_DETL B,OT_FIRM_NAME_APPR_HEAD C WHERE A.DEH_SY
S_ID = B.DED_DEH_SYS_ID AND B.DED_DAK_SYS_ID = C.FNAH_DED_SYS_I
D AND C.FNAH_SYS_ID = (SELECT MAX(B.FNAH_SYS_ID) FROM OT_FIR
1,216,226 4 304,056.5 2.3 9.90 54.25 937031003
SELECT TRIM(STUD_SRN)
Q1_REGNO, TR
IM(STUD_TEMP_REF_NO)
Q1_TEMPNO, STUD_TITLE
1,138,801 178 6,397.8 2.1 18.13 1009.80 1617597
SELECT SRN,ACTIVITYDESCRIPTION,STATUS,DOCUMENTNO,DOCUMENTDATE FR
OM OV_ART_TRANS_STATUS WHERE (SRN=:1) order by DOCUMENTDATE
1,029,221 230 4,474.9 1.9 20.27 20.76 1838125769
SELECT MRH_DT,MRH_FIRST_NAME,MRH_MIDDLE_NAME,MRH_SUR_NAME,MRH_ST
ATUS FROM OM_MEM_REG_HEAD WHERE DECODE(:b1,1,MRH_MRN,MRH_MFCH
TEMPREF_NO) = :b2
778,949 52 14,979.8 1.5 20.32 21.85 4142254844
SELECT LTRIM(RTRIM(DECODE(TIT_NAME,'MR.','CA.','MS.','CA.','MRS.
','CA.') || ' ' || MRH_FIRST_NAME || ' ' || MRH_MIDDLE_NAME
|| ' ' || MRH_SUR_NAME || ' ' || DECODE(MRH_APPR_UID, NULL ,
NULL ,DECODE(MRH_MEM_STATUS,2, NULL ,DECODE(MRH_FELLOW_STATUS_YN
,'Y','FCA','ACA'))) || DECODE(MRH_RESI_STATUS,'A','
755,893 517 1,462.1 1.4 90.43 89.07 1033584013
SELECT DECODE(MFCD_FEE_TYPE,'M08',1,'M05',2,'M06',3,'M09',4,'M10
',5,'M11',6,'M12',7,'M07',8,'M13',9,'M14',10,'M15',11,'M04',12,'
M03',13,'M02',14,'M01',15,'M21',16,'M22',17,'M23',18,'EXCESS',19
,20) FEE_SEQ,MFCD_FEE_TYPE FEE_TYPE,SUM(MFCD_AMT) AMOUNT FROM
OT_MEM_FEE_COL_HEAD,OT_MEM_FEE_COL_DETL WHERE MFCH_SYS_ID = MFC
751,010 1,090 689.0 1.4 28.61 31.41 1734754400
SELECT ROWID,PIIPD_ICAI_EXAM_APPEARED,PIIPD_REG_NO,PIIPD_MTH,PII
PD_YR,PIIPD_ROLL_NO,PIIPD_EXT_EXAM_APPEARED,PIIPD_EXAM_CODE_1,PI
IPD_SUBJ_CODE_1,PIIPD_GROUP_1,PIIPD_ROLL_NO_1,PIIPD_LAST_PAPER_D
T_1,PIIPD_EXAM_CODE_2,PIIPD_SUBJ_CODE_2,PIIPD_GROUP_2,PIIPD_ROLL
SQL ordered by Reads for DB: ICAI Instance: icai Snaps: 70 -73
-> End Disk Reads Threshold: 1000
CPU Elapsd
Physical Reads Executions Reads per Exec %Total Time (s) Time (s) Hash Value
227,513 2 113,756.5 10.1 22.04 79.36 2837394537
SELECT STUD_SRN,STUD_FIRST_NAME,STUD_MIDDLE_NAME,STUD_MAIDEN_NAM
E,STUD_SURNAME,STUD_FATHER_NAME,STUD_BIRTH_DT,STUD_COMM_CODE,STU
D_SEX,STUD_HANDICAPPED_YN,STUD_HANDICAPPED_REASON,STUD_LANG_CODE
,STUD_NATIONALITY_CODE,STUD_EMAIL,STUD_PERMNT_ADDR_LINE_1,STUD_P
ERMNT_ADDR_LINE_2,STUD_PERMNT_ADDR_LINE_3,STUD_PERMNT_ADDR_LINE_
220,939 12 18,411.6 9.8 21.99 47.39 1585476974
SELECT NVL(TO_CHAR(A.DEH_APPLICATION_DT,'DD/MM/RRRR'), NULL ),NV
L(TO_CHAR(A.DEH_DT,'DD/MM/RRRR'), NULL ) FROM OT_DAK_ENTRY_HEA
D A,OT_DAK_ENTRY_DETL B,OT_FIRM_NAME_APPR_HEAD C WHERE A.DEH_SY
S_ID = B.DED_DEH_SYS_ID AND B.DED_DAK_SYS_ID = C.FNAH_DED_SYS_I
D AND C.FNAH_SYS_ID = (SELECT MAX(B.FNAH_SYS_ID) FROM OT_FIR
198,343 2 99,171.5 8.8 5.82 46.25 1414719916
UPDATE OM_MEM_REG_HEAD SET MRH_MRN=:b1 WHERE MRH_SYS_ID = :b2
198,343 2 99,171.5 8.8 5.81 46.10 1414796677
UPDATE OT_DAK_ACTV_HISTORY SET DAH_REG_NO = :B1 WHERE DAH_REG_NO
= :B3 AND TRUNC(DAH_ACTV_ED_DT ) <= TRUNC(:B2 ) AND DAH_ACTV_ST
ATUS = 'C'
173,892 2 86,946.0 7.7 13.85 16.34 3262067067
SELECT STUD_SRN,STUD_FIRST_NAME,STUD_MIDDLE_NAME,STUD_MAIDEN_NAM
E,STUD_SURNAME,STUD_FATHER_NAME,STUD_BIRTH_DT,STUD_COMM_CODE,STU
D_SEX,STUD_HANDICAPPED_YN,STUD_HANDICAPPED_REASON,STUD_LANG_CODE
,STUD_NATIONALITY_CODE,STUD_EMAIL,STUD_PERMNT_ADDR_LINE_1,STUD_P
ERMNT_ADDR_LINE_2,STUD_PERMNT_ADDR_LINE_3,STUD_PERMNT_ADDR_LINE_
112,038 9 12,448.7 5.0 9.23 10.14 2058267852
SELECT ROWID,STUD_DT,STUD_TXN_CODE,STUD_NO,STUD_AMD_NO,STUD_REF_
FROM,STUD_REF_TXN_CODE,STUD_REF_NO,STUD_TEMP_REF_NO,STUD_SRN,STU
D_TITLE,STUD_STATUS,STUD_FIRST_NAME,STUD_MIDDLE_NAME,STUD_SURNAM
E,STUD_MAIDEN_NAME,STUD_NAME_STATUS,STUD_FATHER_NAME,STUD_NATION
ALITY_CODE,STUD_NATION_PROOF_ENCL_YN,STUD_SEX,STUD_HANDICAPPED_Y
102,583 1 102,583.0 4.5 4.51 285.99 802587273
SELECT ROWID,DEH_DT,DEH_TXN_CODE,DEH_NO,DEH_AMD_NO,DEH_REF_FROM,
DEH_REF_TXN_CODE,DEH_REF_NO,DEH_REF_SYS_ID,DEH_REGION_CODE,DEH_A
PPLICATION_DT,DEH_DOC_STATUS,DEH_STATUS,DEH_PRINT_STATUS,DEH_CLO
STATUS,DEHSYS_ID,DEH_COMP_CODE,DEH_ACNT_YR,DEH_AMD_DT,DEH_AMD_
UID,DEH_AMD_RES_CODE,DEH_REF_FROM_NUM,DEH_CR_UID,DEH_CR_DT,DEH_U
98,825 3 32,941.7 4.4 6.70 6.66 2078892348
/*SELECT STUD_SRN
Q1_RE
GNO, O_GET_OLD_REG_NO(STUD_SRN, :BP_COURSE) OLD_NO, TIT_NAME||'
'||STUD_FIRST_NAME||' '||STUD_MIDDLE_NAME||' '||STUD_SURNAME
Q1_NAME, LTRIM(RTRIM(A.STUD_CORRES_ADDR_LINE_1 ))||DECO
96,187 2 48,093.5 4.3 10.78 16.53 3301514821
SELECT MFCD_PAYIN_SLIP_NO MFCD_PAYIN_SLIP_NO
, DECODE(MFCD_BANK_CODE ,'ICI',1,2) ICI_FIRST
, DECODE(MFCD_INSTR_TYPE,'S',1,'L
SQL ordered by Reads for DB: ICAI Instance: icai Snaps: 70 -73
-> End Disk Reads Threshold: 1000
CPU Elapsd
Physical Reads Executions Reads per Exec %Total Time (s) Time (s) Hash Value
',2,'O',3,4) TYPE_FIRST , MFCD_PAYIN_SLIP_DT , FM_BANK
.BANK_NAME , BAD_ADDR1 ADD1
80,683 4 20,170.8 3.6 9.90 54.25 937031003
SELECT TRIM(STUD_SRN)
Q1_REGNO, TR
IM(STUD_TEMP_REF_NO)
Q1_TEMPNO, STUD_TITLE
77,972 8 9,746.5 3.5 8.92 8.84 2241526944
SELECT ROWID,STUD_DT,STUD_TXN_CODE,STUD_NO,STUD_AMD_NO,STUD_REF_
FROM,STUD_REF_TXN_CODE,STUD_REF_NO,STUD_TEMP_REF_NO,STUD_SRN,STU
D_TITLE,STUD_STATUS,STUD_FIRST_NAME,STUD_MIDDLE_NAME,STUD_SURNAM
E,STUD_MAIDEN_NAME,STUD_NAME_STATUS,STUD_FATHER_NAME,STUD_NATION
ALITY_CODE,STUD_NATION_PROOF_ENCL_YN,STUD_SEX,STUD_HANDICAPPED_Y
75,667 3 25,222.3 3.4 3.34 25.09 3345305231
SELECT DISTINCT SFCH_STUD_SRN FROM OT_STUDENT_FEE_COL_HEAD A,O
T_STUDENT_FEE_COL_DETL B WHERE B.SFCD_SFCH_SYS_ID = A.SFCH_SYS_
ID AND B.SFCD_INSTR_BANK_CODE = :b1 AND B.SFCD_INSTR_NO = :b2
72,658 52 1,397.3 3.2 20.32 21.85 4142254844
SELECT LTRIM(RTRIM(DECODE(TIT_NAME,'MR.','CA.','MS.','CA.','MRS.
','CA.') || ' ' || MRH_FIRST_NAME || ' ' || MRH_MIDDLE_NAME
|| ' ' || MRH_SUR_NAME || ' ' || DECODE(MRH_APPR_UID, NULL ,
NULL ,DECODE(MRH_MEM_STATUS,2, NULL ,DECODE(MRH_FELLOW_STATUS_YN
,'Y','FCA','ACA'))) || DECODE(MRH_RESI_STATUS,'A','
48,619 3 16,206.3 2.2 4.19 4.11 496772197
SELECT ROWID,STUD_DT,STUD_TXN_CODE,STUD_NO,STUD_AMD_NO,STUD_REF_
FROM,STUD_REF_TXN_CODE,STUD_REF_NO,STUD_TEMP_REF_NO,STUD_SRN,STU
D_TITLE,STUD_STATUS,STUD_FIRST_NAME,STUD_MIDDLE_NAME,STUD_SURNAM
E,STUD_MAIDEN_NAME,STUD_NAME_STATUS,STUD_FATHER_NAME,STUD_NATION
ALITY_CODE,STUD_NATION_PROOF_ENCL_YN,STUD_SEX,STUD_HANDICAPPED_Y
48,063 230 209.0 2.1 20.27 20.76 1838125769
SELECT MRH_DT,MRH_FIRST_NAME,MRH_MIDDLE_NAME,MRH_SUR_NAME,MRH_ST
ATUS FROM OM_MEM_REG_HEAD WHERE DECODE(:b1,1,MRH_MRN,MRH_MFCH
SQL ordered by Executions for DB: ICAI Instance: icai Snaps: 70 -73
-> End Executions Threshold: 100
CPU per Elap per
Executions Rows Processed Rows per Exec Exec (s) Exec (s) Hash Value
38,614 38,614 1.0 0.00 0.00 1741347688
SELECT SYSDATE FROM SYS.DUAL
12,490 12,488 1.0 0.00 0.00 2614155871
SELECT DECODE(:b1,'L',DECODE(:b2,'ENG',STATUS_NAME,STATUS_BL_NAM
E),DECODE(:b2,'ENG',STATUS_SHORT_NAME,STATUS_BL_SHORT_NAME)) STA
TUS_DESC,STATUS_FRZ_FLAG_NUM FROM OM_STATUS WHERE STATUS_CODE
= :b4
8,629 8,628 1.0 0.00 0.00 1644340447
SELECT DECODE(:b1,'L',DECODE(:b2,'ENG',FEE_TYPE_NAME,FEE_TYPE_BL
NAME),DECODE(:b2,'ENG',FEETYPE_SHORT_NAME,FEE_TYPE_BL_SHORT_NA
ME)) FEE_NAME,FEE_TYPE_FRZ_FLAG_NUM FROM OM_FEE_TYPE WHERE FE
E_TYPE_CODE = :b4
7,275 7,272 1.0 0.00 0.34 3716207873
update seq$ set increment$=:2,minvalue=:3,maxvalue=:4,cycle#=:5,
order$=:6,cache=:7,highwater=:8,audit$=:9,flags=:10 where obj#=:
1
6,293 6,283 1.0 0.00 0.00 2804237544
SELECT DECODE(:b1,'L',DECODE(:b2,'ENG',CITY_NAME,CITY_BL_NAME),D
ECODE(:b2,'ENG',CITY_SHORT_NAME,CITY_BL_SHORT_NAME)) CITY_NAME,C
ITY_TALUK_CODE,CITY_DIST_CODE,CITY_STATE_CODE,CITY_REGION_CODE,C
ITY_FRZ_FLAG_NUM FROM OM_CITY WHERE CITY_CODE = :b4
6,221 6,221 1.0 0.00 0.00 484036617
SELECT DAH_SYS_ID.NEXTVAL FROM DUAL
6,221 6,221 1.0 0.00 0.00 2945494810
SELECT COUNT(DAH_SYS_ID) FROM OT_DAK_ACTV_HISTORY WHERE DAH_ACTV
TYPE = :B2 AND DAHTXN_SYS_ID = :B1
5,979 5,979 1.0 0.00 0.00 35936114
SELECT STUD_DOC_STATUS FROM OM_STUDENT_HEAD WHERE STUD_SYS_ID
= :b1
4,637 4,637 1.0 0.00 0.00 1237293873
SELECT DECODE(:b1,'L',DECODE(:b2,'ENG',COU_NAME,COU_BL_NAME),DEC
ODE(:b2,'ENG',COU_SHORT_NAME,COU_BL_SHORT_NAME)) COU_NAME,COU_FR
Z_FLAG_NUM FROM OM_COUNTRY WHERE COU_CODE = :b4
4,404 1,276 0.3 0.00 0.00 1829426463
SELECT NVL(TAU_FROM_VALUE,0), NVL(TAU_TO_VALUE,0) FROM IM_TXN_AU
TH_USER WHERE TAU_TA_TYPE = :B3 AND TAU_TXN_CODE = :B2 AND TAU_A
UTH_UID = :B1
4,220 4,220 1.0 0.00 0.00 1006906503
UPDATE OT_DAK_ACTV_HISTORY SET DAH_ACTV_ED_DT = :B3 , DAH_ACTV_S
TATUS = 'C' WHERE DAH_ACTV_TYPE = :B2 AND DAH_TXN_SYS_ID = :B1
3,874 66 0.0 0.00 0.00 4284733339
SELECT TIT_NAME ||' '|| AR_FIRST_NAME||' '||AR_MIDDLE_NAME||' '|
|AR_SUR_NAME FROM OT_ARTICLE_REGISTRATION, OM_TITLE WHERE TRIM(A
SQL ordered by Executions for DB: ICAI Instance: icai Snaps: 70 -73
-> End Executions Threshold: 100 -
Log File Error when open MDS_Log from MDM Console
Hi Experts,
I am facing a problem when I tried to open MDS_Log file from MDM Console. The error message was showing as below:
Log File Error
Problems in the log file prevent Console from displaying its contents. To view log contents, open the log file in a seperate text editor.
Could any of you advise me how to open the log in a seperate text editor from MDM console ?
Thanks very much in advance
Regards,
Wei DonaHi ,
Just right click on record pane of log node and select save .it will sav to user defined location in .csv format.
Please try at yr end.
Thanks,
Sudhanshu -
DB2 Log file Management is not happening properly
Hi experts,
I am running SAP ERP6.0 EHP4 on DB2 9.5 FP4
I have enabled Archive log by providing First Log Archive Method (LOGARCHMETH1) =DISK: /db2/PRD/log_archive
I have brought down SAP & Database and started database .After starting DB , taken full offline backup.
Didnu2019t change below parameters as these are replaced by LOGARCHMETH1 in newer versions as per documents.
Log retain for recovery enabled=OFF
User exit for logging enabled =OFF
/db2/PRD/log_dir (Online transaction Logs) is 25% full but I couldnu2019t find even single file in /db2/PRD/log_archive
I am suspecting DB2 Log file Management is not happening properly as I couldnu2019t find any offline transaction logs in /db2/PRD/log_archive file system
Request you let me know where it went wrong & what could be the issue
thanksHello,
From your post it seems that there is a space character between "DISK:" and the path you have provided.
Maybe this is only a wrong display here in the forum.
Nevertheless, can you check it in your system, it should rather look like DISK:/db2/PRD/log_archive.
Can you initiate an archive command with the "db2 archive log for db prd" command.
What does the db2diag.log tell for this archiving attempt? -
Database not starting,REDO log file error?
My DB was working fine uptill last evening, when i restarted it for some DB task it showed me an error ..
ORA-00333: redo log read error block 57346 count 8192
I studied the alert log file & related trace file .... but could not conclude what to do ?? Can any one suggest me what could be the solution...
ORACLE 10g R2
Windows 2003 Server
Database in NOARCHIVELOG mode.
I don't have the recent backup.The one i have is 20 days old.
Alert Log file contents : -
Wed Jun 02 20:22:19 2010
Aborting crash recovery due to error 333
Wed Jun 02 20:22:19 2010
Errors in file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc:
ORA-00333: redo log read error block 57346 count 8192
ORA-333 signalled during: ALTER DATABASE OPEN...
Wed Jun 02 20:37:15 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Jun 02 20:43:53 2010
Shutting down instance: further logons disabled
Wed Jun 02 20:43:53 2010
Stopping background process CJQ0
Wed Jun 02 20:43:54 2010
Stopping background process MMNL
Wed Jun 02 20:43:55 2010
Stopping background process MMON
Wed Jun 02 20:43:56 2010
Shutting down instance (immediate)
License high water mark = 3
Wed Jun 02 20:43:56 2010
Stopping Job queue slave processes
Wed Jun 02 20:43:56 2010
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Wed Jun 02 20:43:58 2010
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Wed Jun 02 20:43:58 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Trace file to read ora10g_ora_140.trc:-
Dump file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc
Wed Jun 02 20:22:18 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:3527M/4094M, Ph+PgF:4386M/5973M, VA:800M/2047M
Instance name: ora10g
Redo thread mounted by this instance: 1
Oracle process number: 15
Windows thread id: 140, image: ORACLE.EXE (SHAD)
*** SERVICE NAME:() 2010-06-02 20:22:18.406
*** SESSION ID:(159.3) 2010-06-02 20:22:18.406
Successfully allocated 2 recovery slaves
Using 545 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 14261, block 2, scn 86974094
cache-low rba: logseq 14260, block 4023
on-disk rba: logseq 14262, block 3758, scn 86978396
start recovery at logseq 14261, block 2, scn 86974094
ORA-00333: redo log read error block 57346 count 8192
ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00333: redo log read error block 57346 count 8192
ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00333: redo log read error block 57346 count 8192
*** 2010-06-02 20:43:58.812
*** 2010-06-02 20:43:58.812 60680 kcrr.c
ARCH: Archival disabled due to shutdown: 1089
*** 2010-06-02 20:43:59.812 60680 kcrr.c
ARCH: Archival disabled due to shutdown: 1089Hi,Aman this(following) may is not good way for opening database,but OP can try and open own database:
@ DBA4 you will see from following example how you can open your database.In your online log files was corrupted,therefore you have to do following step by step then you database will open.
SQL> alter database clear unarchived logfile group 2;
alter database clear unarchived logfile group 2
ERROR at line 1:
ORA-01624: log 2 needed for crash recovery of instance p (thread 1)
ORA-00312: online log 2 thread 1:
'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG'
SQL> alter database backup controlfile to trace as 'D:\oracle\product\10.2.0\ora
data\P\c.txt';
Database altered.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 125829120 bytes
Fixed Size 1288100 bytes
Variable Size 75499612 bytes
Database Buffers 41943040 bytes
Redo Buffers 7098368 bytes
SQL> CREATE CONTROLFILE REUSE DATABASE "P" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO01.LOG' SIZE 50M,
9 GROUP 2 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG' SIZE 50M,
10 GROUP 3 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO03.LOG' SIZE 50M
11 DATAFILE
12 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF',
13 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\UNDOTBS01.DBF',
14 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSAUX01.DBF',
15 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\USERS01.DBF',
16 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TS_TEST.ORA',
17 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST.ORA',
18 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST1.ORA'
19 CHARACTER SET WE8MSWIN1252;
Control file created.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
%U_.ARC
ORA-00280: change 2032832 for thread 1 is in sequence #87
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
ORA-01112: media recovery not started
then add *_allow_resetlogs_corruption=true* in pfile then startup database with pfile as
SQL> startup mount pfile=D:\oracle\product\10.2.0\admin\P\pfile\init.ora.pr
ORACLE instance started.
Total System Global Area 125829120 bytes
Fixed Size 1288100 bytes
Variable Size 62916700 bytes
Database Buffers 54525952 bytes
Redo Buffers 7098368 bytes
Database mounted.
SQL> recover;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
%U_.ARC
ORA-00280: change 2032832 for thread 1 is in sequence #87
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
ORA-01112: media recovery not started
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Database altered.
SQL>finally remove allowresetlogs_corruption=true parameter from pfile. -
Deployment utility gives file not found warning, but build completes succesfully.
When running the deployment utility, I am able to analyze source files successfully; no problems there. When I go to build, all appears to go well until I click the popup that has the message: "The build is finished." After closing the popup, I get the following warning:
"Warning: This problem will cause an error when building a deployable image or an installer. The following file(s) were not found:"
It's followed by a list of dozens of files. However, I verified that all files are included in the search directories.
I installed the deployment as-is and it seems to run ok; it finds the files it's supposed to. However, I'm going to have a hard time selling this procedure off to QA if the deployment shows a 'file not found' message.
My question is: why do I get the 'file not found' warning during the deployment build process, yet the 'analyze source file' step finishes ok and the deployed files work ok?These files are all relative and are part of the workspace. I did find a
workaround to the problem.
In the search directories selection box, the top-level entry is "Current
sequence file" with subdir search enabled. The next entry is the workspace
directory with subdir search enabled; all files are in subdirs of the
workspace directory. The remaining entries are unchecked or not
user-defined (ie.: other NI directories on my computer). In order for the
deployment to work, I had to enable the third entry on the list: "Initial
directory" along with subdir enabled. However, the initial directory is
the same as the workspace directory (since I opened teststand by
double-clicking on my .tsw file). What I don't understand is why should it
matter that I have initial directory on the path if it's the same as the
entry before it? -
Exchange 2013 Window Backup failure - fails to clean up log files - error FFFFFFFC
Hello,
We currently have an Exchange 2013 - Exchange 2007 coexistence setup.
1x Windows Server 2008 R2 with Exchange 2007 CAS/HUB
1x Windows Server 2008 R2 with Exchange 2007 MBX
1x Windows Server 2008 R2 with Exchange 2013 CU 3 (all roles)
Since our current backup solution (Symantec Backup Exec 2010 R3) does not support backing up Exchange 2013 CU3 databases, we are using the builtin Windows Backup feature to backup the Exchange 2013 CU3 databases.
This has functioned for a while, until all of a sudden, the log files are not cleared anymore, causing our log disk to fill up.
Our Exchange 2013 server looks like this:
C: Windows + Exchange installation
D: Databases
E: Database Log Files
F: Archive Databases
G: Archive Database Log Files
S: Dedicated backup volume
The backup is scheduled to run every day at 21:00 hours, performing a full VSS backup of D:,E:,F: and G: to the volume S:
Windows backup log says the backup completed with exceptions, leaving the Exchange logs untouched and filling the drive.
The Windows Backup Command Line tools are NOT installed since they are not compatible with Exchange 2013.
In the eventvwr we can see the following error:
The Microsoft Exchange Replication service VSS Writer (Instance a33ec440-7f12-4c50-806b-1bc5ceaf8aad) failed with error FFFFFFFC when processing the backup completion event.
The command VSSADMIN LIST WRITERS displays the following:
Writer name: 'Microsoft Exchange Writer'
Writer Id: {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}
Writer Instance Id: {cf84a907-76dc-428c-90e0-c18a3f9db493}
State: [1] Stable
Last error: Retryable error
Restarting the Microsoft Exchange Replication (MSExchangeRepl) clears the writer error, same with a reboot, however the error comes backup after the next backup.
Any thoughts on how to resolve this issue?
Thanks.Hello,
Here is a blog for your reference.
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
If there is any useful information after you change the logging to expert, please free let me know.
Cara Chen
TechNet Community Support -
I'm using a FileHandler (set in the properties file) to log to a network drive on another computer. If the computer targeted by the log fails, or I otherwise lose the connection, I need to note it, periodically check to see if the connection returns, and resume logging.
I see that I can get an ErrorManager from my FileHandler, and periodically check to see if there is an error, then hopefully reconnect, but I've been having no luck actually getting the Handler from the Logger. It always returns an empty array of Handlers. I tried getHandlers() on java.util.logging.Logger.global as well--still no joy.
Is there another way around this problem?Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
Can't open Flash Builder - "See the log file" error.
I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
"An error has occured. See the log file."
and if i check the log file it refers to then i see the following text:
!SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
!MESSAGE Application error
!STACK 1
org.eclipse.swt.SWTError: No more handles
at org.eclipse.swt.SWT.error(SWT.java:4109)
at org.eclipse.swt.SWT.error(SWT.java:3998)
at org.eclipse.swt.SWT.error(SWT.java:3969)
at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
I have tried re-installing Flash Builder twice and no luck.
Can anyone help with this???
Thanks !!!!
Elliot.There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.
-
Redo log file corupted, database not getting open
I am Oracle Funda-1 student.
Have install standard Oracle 9I on Windows XP pro service pack 2.
I made some changes in sample table & given commit. So log buffer will flush to redo log file.
Then I open current redo log file from OS & selected all junk characters [select all] & deleted same. Save the file. Causing redo file size 0KB.
Then made more changes to table & issue commit. no errors ! every thing working file.
Even chked V$log & V$logfile.
Again I open current redo log file from OS & selected all junk characters [ select all ] & deleted same. Save the file. Causing redo file size 0KB.
Then issue manual log switch. Alter system switch logfile
I got disconnected from database & database was close.
When I reconnected & try to open database in normal mode. Gave error saying redolog_1.log is corrupted & needed for recovery.
Now not even allowing me clear redo group 1. with alter database clear logfile group 1. as database is not coming to open stage.
just able to mount the database. with error rdolog_1 corrupted.
Wasn't oracle suppose to be halted when very 1st time I corrupted redo log file.
Why it disconnected me & got close.
When then one use alter database clear logfile group 1.I may try this ALTER DATABASE OPEN RESETLOGS;
As no backup & not multiplex.
Still looking for explanation why database got close down instead of getting halt.
I have found one more status in V$log, which is not given in Oracle university book or online document.
INVALIDATED
Which come as a result when oracle unable to switch to next on line group due to non availability of next group redo log physical file.
SQL> select group#,members,status from V$log;
GROUP# MEMBERS STATUS
1 1 INVALIDATED
2 1 INACTIVE
4 1 UNUSED
As matter of fact, it's only portion of a big
document which happen to cover what you are testing
in detail.
I would invest time to read the document to
understand how things work instead of getting dirty
quick answers. -
WL tries to deploy utility jar file in .ear as an EJB
I have an ear containing two ejb jars, one webapp war and a utility jar
(common.jar). Deploying to
WebLogic 6.1 sp2 results in deployment errors because WebLogic thinks
the common.jar in a
lib directory in the ear is an ejb jar:
==================================================================
><Apr 22, 2002 4:42:36 PM MDT> <Error> <J2EE> <Error deploying
>application lib/common:
>
>Unable to deploy EJB: lib/common.jar from lib/common.jar:
>
>An error occurred while reading the deployment descriptor. The error was:
> java.io.FileNotFoundException: META-INF/ejb-jar.xml not found in jar file
> at weblogic.ejb20.dd.xml.DDUtils.getEntry(DDUtils.java:332)
> at weblogic.ejb20.dd.xml.DDUtils.getEjbJarXml(DDUtils.java:236)
>.........
>===================================================================
Why does it think common.jar contains an EJB? My application.xml is:
>
><application>
> <display-name>TestUnit</display-name>
> <module>
> <ejb>TestUnit1.jar</ejb>
> </module>
> <module>
> <ejb>TestUnit2.jar</ejb>
> </module>
> <module>
> <web>
> <web-uri>WebApp1.war</web-uri>
> <context-root>WebApp1</context-root>
> </web>
> </module>
></application>Hi.
Please open a case with support.
Regards,
Michael
Rick Holland wrote:
I have an ear containing two ejb jars, one webapp war and a utility jar
(common.jar). Deploying to
WebLogic 6.1 sp2 results in deployment errors because WebLogic thinks
the common.jar in a
lib directory in the ear is an ejb jar:
==================================================================
<Apr 22, 2002 4:42:36 PM MDT> <Error> <J2EE> <Error deploying
application lib/common:
Unable to deploy EJB: lib/common.jar from lib/common.jar:
An error occurred while reading the deployment descriptor. The error was:
java.io.FileNotFoundException: META-INF/ejb-jar.xml not found in jar file
at weblogic.ejb20.dd.xml.DDUtils.getEntry(DDUtils.java:332)
at weblogic.ejb20.dd.xml.DDUtils.getEjbJarXml(DDUtils.java:236)
===================================================================Why does it think common.jar contains an EJB? My application.xml is:
<application>
<display-name>TestUnit</display-name>
<module>
<ejb>TestUnit1.jar</ejb>
</module>
<module>
<ejb>TestUnit2.jar</ejb>
</module>
<module>
<web>
<web-uri>WebApp1.war</web-uri>
<context-root>WebApp1</context-root>
</web>
</module>
</application>
Michael Young
Developer Relations Engineer
BEA Support -
Log File Error - Is this my Responsibility?
Hi server admin people,
I'm a customer who is trying to kill an application hosted by
my ISP. I've removed and deleted all related directories and files
on my ISP's server and told them I don't need ColdFusion support
anymore. However, they want to continue charging me because their
server is getting bogged down by calls to a cfm page that no longer
exists. The error log file is below. I don't know how to fix the
problem. Should I have to? I guess my expectation would be that
this is some attack my ISP should know how to handle. Greatly
appreciate anyone taking the time to look and advise. Here are the
repeating lines in the server's log file my ISP provided me with:
"Error","jrpp-611","12/24/08","19:32:35",,"File not found:
/Intranet/processaskquestion.cfm The specific sequence of files
included or processed is:
F:\InetPub\Webhost\Testing\Intranet\processaskquestion.cfm "
coldfusion.runtime.TemplateNotFoundException: File not found:
/Intranet/processaskquestion.cfm
at coldfusion.filter.PathFilter.invoke(PathFilter.java:77)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:47)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:35)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:43)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:252)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:192)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:348)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Sincerely, Paul.If you make *any* request for *any* ColdFusion file {.cfm,
.cfc, .cfr,
etc} on *any* web site on a web server configured with
ColdFusion, you
will get a ColdFusion error by default.
The default behavior is for the Web Server to handle in such
request to
ColdFusion if the file exists or not. There are settings that
can
change this, but that can turn of some of ColdFusion's
functionality.
So, yes I think this is the ISP's issue.
Maybe you are looking for
-
Can I hotsync more than one user calendar on my Centro?
I have a Macbook and just acquired a Centro (ATT). I have about 3 users in my Palm Desktop program and would like to hotsync them all to my Centro. Possible? How? and if so, how do I switch between them to view them? TIA, Tim Post relates to: Tungst
-
How do I get mail on my iPhone and computer to sync automatically, so e.g. messages read on one appear read on both? I am working in VN and the microsoft access server is in the USA.
-
Encountered error while updating the payment document
Hi Guys, I encountered an error while updating the payment document of one of our bank account. See below error message: Error: Unable to lock the record. Cause: The record is being modified by another user thanks, gracie
-
Chinese Character in PDF format for Oracle Reports 11g
Hello Everyone, Currently we have a Report that need to be display chinese character in PDF format. We followed the steps specified in the "Oralce Fusion Middleware Publishing Reports to the Web with Oracle Reports Services" documentation but things
-
I have a mini iPad. On my find friends it keeps flashing and is driving me crazy. It doesn't do it on my husband iPad though. Please help.