Deployment with minimal user interaction

We are interested in deploying iPads to users in our company, but we want to do so with minimal user interaction. From what I can tell the best way to do this would be to sync our iPads with one computer and have that computer's iTunes manage the applications that can be installed on all device.
What features would our users not have access to without having direct access to iTunes on their own computer (e.g., data backup)?
Why would doing this not be a good idea?
If after the initial setup we would like to install another application, must we physically obtain the device(s) again to install the application?

halabaluba wrote:
We are interested in deploying iPads to users in our company, but we want to do so with minimal user interaction. From what I can tell the best way to do this would be to sync our iPads with one computer and have that computer's iTunes manage the applications that can be installed on all device.
What features would our users not have access to without having direct access to iTunes on their own computer (e.g., data backup)?
Why would doing this not be a good idea?
If after the initial setup we would like to install another application, must we physically obtain the device(s) again to install the application?
Who will own the iPads?
Will you allow them to take the iPads home?
If they take the iPads home and sync them at home (they will) then anything you installed from your central computer is GONE. The only thing that will stick is the setting you deployed using the “configuration utility”.

Similar Messages

  • Re-image computer with no user interaction at all - SCCM 2012

    I have searched many posts and havent found a clear solution for my question.
    Basically, I have OSD task sequence ready to go on my SCCM 2012 R2. It is fine to run it as "Available".
    If I deploy the OSD through Software Center as "Required" and "ASAP", then I login the client, the client will run OSD task sequence sometime after about 30Min-1 hour later, not sure. And there will be no user interaction needed. However
    this means I need remotely log into each computer to let OSD happen.
    If I deploy the same TASK Sequence as "Required" and "ASAP" through "PXE", it will first ask PXE Password(Which I set in DP->PXE Panel), then I need hit "Next" again to start the assigned OSD, which means I need
    physically go to each computer to do this. (EDIT: If needed, I can remove PXE password and add VB scripts in other Task Sequence, however I want to know if I still need press NEXT to start the OSD).
    The clients are not AMT enabled but Lan Wake up enabled and also can be set to LAN WAKE UP Enabled with boot from LAN. I can wake up/shutdown the whole collection with command if needed. 
    Is there a way that I can Re-image one collection of Computers without any interaction on client side?  
    The other question is how long to wait for OSD when it is set to "ASAP"?
    RockyOZ

    Guess I just answered question myself. With PXE Password removed, the OSD runs without user interaction. Thanks. I will add the password in task sequences instead.
    RockyOZ

  • Auto-install updates, with no user interaction?

    Due to problems with malware, we can't really trust everyone to be logged on with administrator privileges all the time as it used to be with Windows 2000 and XP. Consequently the installed software can not be modified by staff anymore.
    This doesn't affect Windows Updates since those can be configured to install automatically on a schedule without any user interaction or privilege elevation.
    Java for Windows however does not detect when a logged in user does not have administrative rights, so it offers updates to everyone who logs on, including people who can not and will not ever be able to install the updates.
    One "solution" is to turn off the update checking so that people aren't hassled by useless update notifications, but then this means Windows desktops will gradually fall further and further out of date, opening them up to attack by malware that exploits unpatched bugs in older Java versions.
    The proper solution that I really want, is for Java to be capable of auto-update and self-install without any user interaction or privilege elevation at all. However so far I have not found a solution for this.
    A hack may be possible using Windows group policy, the Windows Server task scheduler, and a java website screenscraper.
    Nightly:
    * Screenscrape Java.com for a newer client version
    * If new one is found, download, put in global read-access share
    * Using a database of machines known to be running Java, flag each candidate that's using an older version
    * Wake-on-LAN the machines needing the update
    * Schedule a remote install of the update with Administrative privileges
    * If update successful, clear flag for that machine in central database
    * shut down again for the night.
    OR
    Java programmers could implement an auto-install mechanism of their own, that can run by itself without user interaction at system startup, shutdown, or on a timed schedule set by the administrator through registry entries (and therefore configurable via group policy applied to desktops).
    ==========
    How are other network administrators handling managed business desktops that need periodic, automatic, and non-interactive Java updates?

    We use Altiris Software Delivery solution to deploy our Java updates but you could also use similar solutions such as Microsoft System Center Configuration Manager.
    The problem is that these are both options that cost money and require investment and training.
    Altiris allows you to create a collection based on the text string held in the Add/Remove Programs list (as well as other fields) - so you can easily create a collection of computers that do not have the required version of Java.
    You can then create a software delivery task to silently install Java with admin rights and target it towards the collection that needs updating.
    The collection updates dynamically. As the computers get Java they drop out of the collection and are no longer targetted for upgrade. This used to work well for me - as I could update about 500 machines in about 2-3 days.
    The problem is that the Java installer doesn't work consistently as you mentioned since JRE 6u25 - the installer doesn't always behave as expected and the switches to do silent installs keep changing. You also have a problem if you try to update Java and the person has their web browser open... Yes, I do my updates during working hours as well.
    In a constantly changing environment in terms of security - you'd think Oracle would have sorted the deployment options out by now?

  • Firefox 4 Deployment with customized user settings?

    Hi folks,
    I want to deploy FF 4.0 with customized user settings, but where is the "localized" folder for my prefs.js file? In FF 3.6.x we've extracted the setup.exe file and with sources we deployed our customized firefox. Now in FF 4.0 there are some folder missing in the new sources. Are there any documents which explain the deployment of FF 4.0? thanks a lot

    Here are some instructions for creating a customised deployment of Firefox 4 (including setting the homepage for all new and existing users)
    http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html
    http://mockbox.net/configmgr-sccm/300-firefox-4-set-default-home-page-for-all-users.html

  • Dialog with no user interaction

    Hi all,
    I would like to use the one button dialog that would just showing a message without requiring any user interaction.  With the dialog, I only want to display a message for the user. I want the program to continue running without needing user interaction.  I just want to let the user know that something happened.  I don't need to user to do anything.  How do I do that? 
    Yik
    Kudos and Accepted as Solution are welcome!
    Solved!
    Go to Solution.

    A more common approach is to use a "Status log" (just a string on the UI that gives the user some idea what is going on.)
    Here is a construct I often use (place the control "Status" on the UI, Add a control to the referance to "Status" wire the Connector pane.)  This type of action engine (see Ben's excellant nugget) lets you send update messages to the user from anywhere in the application instance space without leaving pop-ups all over the screen.
    And should you wish, you can add cases to Show, blink, unblink, highlight, move or Hide the indicator so it peeks out and dances
    Jeff

  • Need backup solution with zero user interaction

    Good Day.
    I'm putting together a external/offsite backup solution for a client that runs OSX10 Server on a Mac Mini.
    Their data is on a Promise SAN, and they currently back up via software daily to an externally attached 4TB Drive.
    The big problem is that each day, a user comes in and removes "yesterday's" external drive to give it to the courier who stored it offsite, then they plug in the drive for "today's" backup. Neither the user nor the courier has access to log in to the server to unmount the external drive. Many times, this leaves the external drive in a corrupted state and unusable.
    I'm not allowed to give the user of the courier access to the server, and attempts to schedule or script the unmounting of the drives have been troublesome.
    I'd like to know if there's a solution out there, possibly an external chassis with removable drives or something similar that can be used to allow for easy removal of the drives to offsite storage that would not require an actual unmounting of the drive.
    All advice is appreciated.

    What software are you currently using to do backups?
    Not that it will help, but if you were backing up to an external optical drive e.g. DVD or Blu-Ray then they have a physical eject button which would tidily eject the media, unfortunately hard disks and even hard disk docks do not work the same way.
    Something that might help would be if whatever backup solution you used was able to work on a Mac that did not need to be logged in as a user, in other words that ran as a Unix style background process. This would mean that as no user is logged in the Finder would not be active and this would reduce but not eliminate the avenues for corruption.
    Again it will probably not help you but a different approach used by many is to backup over a WAN or Internet link to another site, with this approach your backup media is already offsite and you don't need to eject it to transport it. This does of course rely on a decent speed link in both directions so as to both allow backups and restores.
    Something else to consider, if you used a separate dedicated Mac for doing the backups rather than a server then you could consider giving the courier access to the backup machine without having to give access to a server. If you use encrypted disk images on the backup drive then even with access to the backup machine it maybe possible to still prevent their access to data on it.

  • Testing SWING app with no user interaction

    Hi,
    I have a small SWING application, it contains a few text fields and a
    button. I want to test this without human interaction. For buttons, I tried the button.doClick() but it did not do anything! And for the text fields, I can't figure out how to do it. I am relatively new to SWING, I would appreciate your help so much.
    Thanks,
    Ann

    It may not be what you want, but why can't you simply have the button call a method when pressed. That way, in your test code you can simply call that method.
    button.addActionListener( new ActionListener() {
         public void actionPerformed( ActionEvent e ) {
              doAction();
    // Debug
    if (DEBUG) {
      doAction();
    }Jonathan

  • Hi i want to execute 3 reports  at one click without user interaction

    hi Friends,
    Hi i want to execute 3 reports with one click ie  by putting radio button when we click on this this wants to execute all 3 reports with out user interaction pls try to understand and provide the solution pls
    Thanks & Regards
    Mohan  Reddy

    Hello,
    To achieve this you can use the SUBMIT command after an user action.
    Example
    The program report1 has a stand-alone selection screen with the screen number 1100. In the program report2, an internal table with row type RSPARAMS and a ranges table are filled for this selection screen. These are transferred at SUBMIT together with a single condition.
    Program accessed
    REPORT report1.
    DATA text TYPE c LENGTH 10.
    SELECTION-SCREEN BEGIN OF SCREEN 1100.
      SELECT-OPTIONS: selcrit1 FOR text,
                      selcrit2 FOR text.
    SELECTION-SCREEN END OF SCREEN 1100.
    Calling program
    REPORT report2.
    DATA: text       TYPE c LENGTH 10,
          rspar_tab  TYPE TABLE OF rsparams,
          rspar_line LIKE LINE OF rspar_tab,
          range_tab  LIKE RANGE OF text,
          range_line LIKE LINE OF range_tab.
    rspar_line-selname = 'SELCRIT1'.
    rspar_line-kind    = 'S'.
    rspar_line-sign    = 'I'.
    rspar_line-option  = 'EQ'.
    rspar_line-low     = 'ABAP'.
    APPEND rspar_line TO rspar_tab.
    range_line-sign   = 'E'.
    range_line-option = 'EQ'.
    range_line-low    = 'H'.
    APPEND range_line TO range_tab.
    range_line-sign   = 'E'.
    range_line-option = 'EQ'.
    range_line-low    = 'K'.
    APPEND range_line TO range_tab.
    SUBMIT report1 USING SELECTION-SCREEN '1100'
                   WITH SELECTION-TABLE rspar_tab
                   WITH selcrit2 BETWEEN 'H' AND 'K'
                   WITH selcrit2 IN range_tab
                   AND RETURN.
    Regards.

  • Is it possible to remove user interaction in a eventListener ?

    Hi,
    I am working on two scripts that both need to deal with the user interaction.
    This following script works just fine. The only matter is that Indesign alerts me that the script prevented the UI dialog from opening.
    What if I don't want any alert ?
    #targetengine "newdialog"
    Application.prototype.main = function(){
         //app.addEventListener ("beforeNew", preventMe, false);
         var myMenuAction = app.menuActions.item("$ID/Document...");
         myMenuAction.addEventListener ("beforeInvoke", preventMe, false)
    function preventMe(myEvent){
         //alert(myEvent.cancelable);
         myEvent.stopPropagation();
         myEvent.preventDefault();
    app.main();
    I thought about userInteractionLevel but I tried to use it recently and I couldn't get it working. My intention was to get an automated update of my modified links when opening a file.
    It's like
    app.scriptPreferences.userInteractionLevel
    couldn't be set once the script has been launched.
    #targetengine "autolinkupdate"
    main();
    function main(){
         var myMenuAction = app.menuActions.item("$ID/kPMOpenDocTextKey");
         myMenuAction.addEventListener("beforeInvoke",removeInteraction,false);
         //app.addEventListener("beforeOpen",removeInteraction, false);
         app.addEventListener("afterOpen",updatelinks, false);
    function updatelinks(myEvent){
         var doc=myEvent.parent;
         var lk = doc.links;
         for(var i=0; i<lk.length; i++){
              try{
                   lk[i].update();
              catch(e){}
         app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
    function removeInteraction(myEvent){
         app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
    So my question is : Is it possible to remove user interaction in a eventListener ?
    Thanks,
    Loic

    Assuiming NHTEST is a database link to the remote database connecting with SCOTT, use user_Tab_cols@NHTESTNicolas.

  • Lync edge server for site with 2500 users

    Dear All,
    I have a question with regards to the implementation of lync edge server deployment.
    One of our client having lync deployment with 4000 users in a central site with 3 FE EE and  edge pool with 2 Edge servers, there are planning for a new site with 2500 users.
    what will be the best method for the site implementation , shall we deploy a SE Fe server and all the external communication through the Central site Edge server?
    or is it required to have a separate pool for site?
    please help me 

    Agree with the others.  So, there's two questions, "what will be the best method for the site implementation?" and "is it required to have a separate pool for site?".
    The best method I'd suggest is use Enterprise Edition Lync so you can perform pool pairing for resiliency, and have a local edge pool as the others suggested.  You have enough users to support this, and with growth you might want to be able to scale
    up anyway.
    Is it required? Not at all.  You can send them all through the central site edge server, it's possible and fully supported.    It's up to you, but I'd suggest the separate pool.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Open specific file, read entire contents, close - no user interaction

    I just want to wire in the file name to
    Open/Create/Replace File.vi
    and to
    File/Directory Info.vi

    You should be able to wire in a constant file path to both the open/create/replace file.vi and the file/directory info.vi. I have attached a VI written in LabVIEW 6.0 that opens a specific file, reads the entire content, and closes the file with no user interaction. Take a look at this example.
    Attachments:
    open_specific_file.vi ‏29 KB

  • How to print a pdf without user interaction (With C#)

    My boss assigned me a task that to get the ImagePreview of 1st page of PDF.
    My thought is to print the 1st page of PDF to file(virtual print to file), and get the image source, but there comes the problem:
    How can print a pdf without user interaction(With C#),question are these:
    1. I can use the ShellExcute but cannot assign the destination of output file.
    2. User interface is unwanted, I don't want show anyone the Acrobat Reader interface who click the file just want to get a preview.
    3. No place to put those parameters in.
    This problem confused me a lot of days, I wish someone can give some hints.
    Thank you very much!
    (Maybe you will tell me to use Acrobat SDK, please don't, I'm afraid we cannot afford that)

    >I have not read the document yet
    This is the first step. There are many documents, but start with the
    introductory/getting started material.
    > with a index.pdx
    A PDX is a search database to allow you to do fast searching in
    Acrobat.
    >
    >About the relationship between Adobe Reader and Acrobat, as far as I know is that, the previous one is just the reading tool for PDF document, instead, Acrobat can modify and resave the PDF doc. Is it right?
    Effectively, yes. But the Acrobat SDK is mainly for working with
    Acrobat. It's very important to keep this clear, since you have said
    you only have the free Reader, so 95% of what is in the SDK cannot
    work for you.
    >
    >Simply my questions,
    >1. I don't know which dll to refer in the .Net project to print with. Is the ActiveX folder in product folder?
    Simply, there is no point asking these questions, yet, because you
    have not started on the documentation.
    But let's continue in the SDK forum, where I have posed what seems to
    be a very important question about why print to file at all.
    Aandi Inston

  • Unable to interact with Flash content when running Firefox with restricted user

    When running Firefox with limited Windows user on Windows XP the Flash elements are displayed, the content that is set to auto-play does so even, but the flash area doesn't receive any mouse input: e.g. when I right click in the area instead of the flash context menu I get the browser context menu as if the flash plug-in wasn't even there. The exact same page on the exact same computer but with Administrator user works as expected: can press buttons, interact with flash controls and the context menu upon right-click is of course the flash one. This behavior occurs even if I disable all add-ons.

    Try uninstalling your sound card driver in Device Manager and reboot your PC.

  • Javascript: Don't interact with the user - Question isn't shown but canceled the action

    Hi
    In m yJavascript I use a method from a third party plugin. During this method there is an alert, a question. I like to suppress this question.
    I use app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT; and then the quesion isn't shown. But the method is canceled with a message like "The user canceled the action!".
    Can I do something? Is there a workaround?
    Thanks
    Hans

    Hmmm. I don't know what "never interact" does, internally, but suppose you switched off user interaction and then a script calls "document.close". The three choices in the Save confirmation dialog are "Save:Yes", "Save:No", and "Cancel". Given that, it would be the safest to have it always return "cancel"!
    Since this is a 3rd party plugin, you probably can contact its manufacturor and ask for a workaround, or possibly a modification.

  • Deploying Firefox 7 with default user preferences?

    I am having a hard time locating documentation for deploying Firefox with default user preferences (such as disabling automatic updates, setting a homepage, etc.). I located information for previous versions which mention of adding a user.js file to the defaults/pref folder. But this doesn't seem to work.
    What is the proper way (if one exists) to customize Firefox for deployment in an enterprise scenario?

    And people wonder why FireFox hasn't made much of a dent in the enterprise. This says it all......

Maybe you are looking for