Javascript: Don't interact with the user - Question isn't shown but canceled the action

Hi
In m yJavascript I use a method from a third party plugin. During this method there is an alert, a question. I like to suppress this question.
I use app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT; and then the quesion isn't shown. But the method is canceled with a message like "The user canceled the action!".
Can I do something? Is there a workaround?
Thanks
Hans

Hmmm. I don't know what "never interact" does, internally, but suppose you switched off user interaction and then a script calls "document.close". The three choices in the Save confirmation dialog are "Save:Yes", "Save:No", and "Cancel". Given that, it would be the safest to have it always return "cancel"!
Since this is a 3rd party plugin, you probably can contact its manufacturor and ask for a workaround, or possibly a modification.

Similar Messages

  • IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
    I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
    One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
    If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
    I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
    As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
    DU needs to be reading the packages on the HD, not the (now out of date) install disc.
    The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
    http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

  • I want to get all the User Name in a string[ ], but How..... don't know

    hi all
    I have table in MS Access databse called Login with two coulmn (User, Password),
    I want to get all the User Name in a string[] called USER,
    (LIKE USER = {"AA","BB","CC",........"zz"};)
    can anybody send me the code to get the USERNAMES form Login Table, i tried lots of way but bad luck
    so plz someone send me a code.
    Thanx
    Regards
    Satinder

    Well, the biggest problem is that you don't know (probably) a head of time how many names are in the table.
    So i'd first stuff them into a managed array such as ArrayList
    So you'd
    (1) Iterate over the resultset
    (1.1) for each row call getString() on the user field
    (1.1) call add on the ArrayList to add the string
    (2) Call toArray on the ArrayList to convert it to a plain array
    (NOTE: you will have to pass a String[] {""} arg as a parm to
    toArray() to get the right type of array.)

  • I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    You need to use the computer's install disks to repair the hard drive or install a new OS.
    (58033)

  • I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

    i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • I use floating time zone with all of my iCal entries.  But then the times of the entries do not print when printing month view.  Is there a fix for this?

    I use floating time zone with all of my iCal entries.  But then the times of the entries do not print when printing month view.  Is there a fix for this?

    Sorry to have repeated this question as if I were answering it.  Just a mistake.  I'm just now learning how to use this site.

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • HT1430 Can not get mail , it sayes that the user name or password is incorret, it the right one

    Can not get mail , it sayes that the user name or password is incorret, it the right one

    You need to contact the email provider and reset your information. All your iPhone does is send the information to the provider and they are stating your username or password are incorrect. If you contact the provider they can help you reset it so it will work with your phone

  • Address of the user changed updated into sap but still not reflecting at

    address of the user changed updated into sap but still srm shopping has the old
    address .
    what could be the possible reasons of this bug?

    Hi
    Which SRM version are you using ? <b>We encountered the Same Issue long time back -></b>
    Are you updating the Addresses in Web Transaction or using SAP GUI (SU01 transaction) ?
    <b><u>Please go through the following SAP OSS Notes below, which will definitely help -></u></b>
    Note 930371 - SRM 5.0: BBPUM01 Check Data
    <u>Related Notes</u>
    Note 931556 - SRM 5.0: Hiding the BBPUM01/BBPUM02 button
    Note 923461 - SRM 5.0: BBPUM01 description for position
    Note 885954 - SRM-UME: User synchronization with wrong address data
    Note 884067 - BPartner w/o an private address can't change their settings
    <u>Do let me know.</u>
    Regards
    - Atul

  • What type of license should the user be assigned when passing transactions through the DI Server?

    What type of license should the user be assigned when passing transactions through the DI Server?
    We used to assign indirect access licenses to users that were just using the DI Server.  We have one add-on developer that says that the user has to be a Profession license. Current environment is SAP B1 9.0 PL10.  My understanding was that you could have up to 10 users assigned to a single DI Server license.

    Hi,
    From the license guide,
    Indirect Access – has access to any SSP solutions (developed with the SAP Business One DI-API) only. The Indirect Access license is bundled with the DI server. Users who have an Indirect Access license can access a limited number of application forms, but cannot perform any functions with the SAP Business One application. Users who have an Indirect Access license can access an unlimited number of SSP solutions
    Thanks & Regards,
    Nagarajan

  • What is the user exit to change segment version at the run time of an IDOC

    Dear Experts
    Please can some one help on this ...
    Which is the user exit to change segment version at the run time of an outbound IDOC.
    For example
    Suppose we have a IDOC segment with two version 620 and 46C.
    By default the IDOC pick the 620. But Our requirement is to use 46C.
    What user exit we can use for outbound IDOC to change the version used at run time for a segment.
    Appreciate your response.
    Thanks

    Hi,
    ALE00001      EXIT_SAPLBD11_001         
    User exit for the IDOC version changer
    Regards,
    Ravi

  • HT5312 For the security questions, it won't give me the option to change it. Like when I go to manage my account,it doesn't say  " send security code." What should I do?

    For the security questions, it won't give me the option to change it. Like when I go to manage my account,it doesn't say  " send security code." What should I do?

    The reset will only show if you had put a rescue email address on your account, if you aren't getting the link then you don't have one and you won't be able to add one until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

  • I can't downloamd Things just because I forgot the security questions and I I'm putting the security questions the wrong answers and they blocked me how can I unblock it

    I can't downloamd Things just because I forgot the security questions and I I'm putting the security questions the wrong answers and they blocked me how can I unblock it

    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    or           
    Apple ID: Contacting Apple for help with Apple ID account security
    3 - Use your rescue email address if you set one up
    Rescue email address and how to reset Apple ID security questions
    For general  information see:
    Apple ID: All about Apple ID security questions

  • I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

    Welcome to Apple Support Communities
    That's the classic behaviour after using Migration Assistant and that's normal.
    To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

Maybe you are looking for