Depreciation Posting after changing cost center in Asset

Hi,
I have posted the depreciation from period 01 to period 03 and changed the cost center in the asset (before posting dep for period 4) but effective from period 1 and did a re-run for period 3 but there is no posting, as I expecting the system to reverse the entry for period 3 from old cost center and post to new cost center.
Please let know whether this is standard behaviour of SAP. We are in ECC6.
Thanks
VS

Hi,
do you have "Time-Independent Management of Organiz. Units" active?
CU: FI-A
- > Master Data
- > Specify Time-Independent Management of Organiz. Units
Please see the F1 Help:
"...Any change to these organizational units during master data maintenance then automatically generates a transfer posting document...:"
Regards Bernhard
Edited by: Bernhard Kirchner on Aug 5, 2010 10:55 AM

Similar Messages

Repeat depreciation run can change cost center in GL a/c or not?

Hi Gurus,
I have hit the following issue.
Fixed Asset 1 originally assigned to CC-01 for month of March.
And my user has run depreciation for March already.
Later she changed cost center to CC-02.
Then she repeat depreciation run for the month of March, from the depreciation result shows the new cost center CC-02.
But there is no document generated and thus from corresponding GL account, there is no change, still point to CC-01.Which means CC-02 has not been posted to GL account yet.
May I please know if repeat depreciation run can change cost center in GL a/c or not?
If cannot, what should be the correct way to post the new cost center in GL?
Thanks a lot.
Best Regards
Li Juan

Hi, I have tried the method you mentioned.
I managed to generate the new document (Message shows: Document is posted under number 7500000000).
So can I say that repeat depreciation run cannot change cost center for corresponding cost element?
Everytime user has to do manual posting.
Thanks a lot.
Rgs
Lijuan

Change cost center in asset master data

Dear All,
When I go to change cost center in asset master data by transaction code AS02 it does show gray cost center field and system does not allow to change. I also tried to use time dependent option but field was still gray. Kindly help me in this regard,
Regards,
Uddin

Hi,
check the accounting object customizing in IMG FI-AA. At the step where you activate the accounting objects you can set a flag "balance sheet relevant" for the accounting objects. If this is checked, then you will not be allowed to change this accounting object in the asset master record after the first posting to the asset.
Regards,
Markus

How to change cost center in Asset Master record ?

Hi SAP Gurus,
My client is asking me to change cost centers in Asset Master records using LSMW. Currently, the field cost center is in display mode. In order to change the cost center, the field cost center must be in change mode while recording in LSMW. I have changed screen layout rule for Asset Master data. I have selected radio button "Optional" for cost center in screen layout for Asset Master data. But still cost center field is in display mode in Asset Master record. It must be changeable.
Please suggest me how I can resolve the issue.
Regards,
K.S.K

Hi Saravana,
We can change the cost center for AuC Investment measure at WBS element level. For that purpose we need to go to AuC Investment measure Asset master record and check WBS element under Origin Tab. Double click on WBSE and then check the cost center under Assignment tab. And also check the cost center in Asset master record for the same. Now you can go to T.Code CJ12 (Change WBS Element) and change the cost center for the same. Once you make changes system automatically change the cost center in asset master record for the same.
Note: - Now you have to identify all the AuC Investment measure Assets and the WBS Element for the same. Then change the cost center in WBS Element record. And the corresponding changes will be done in relevant Asset master record automatically.
But before making the change please check with the PS/PM consultant regarding changes in WBS element. Means where it will effect?
With Regards
Ravinder Kaushik

How to change cost center in asset master data through mass changes

Hi sap gurus,
Hi i have 20 assets i have to change the cost center through mass changes provide the solution.
regards,
ramanjaneyulu.

Hi,
For 20 assets it won't be useful to write a CATT or LSMW. So, either enter it manually or you could correct directly in the tables (ANLZ), though it's generally not recommended.
Regards,
Eli

After changing cost center assignment to Orgunit or Position in OM.......

Hello,
i delimit the relation between cost centers and orgunits or positions with the sap report RHGRENZ4 and created new relations in PP02 by a batch input map (which i create with the LSMW). This seems to work fine in OM but although the Integration to PA is active, the changes i make have no effect to infotype 0001.
The value in the table T77S0 for PLOGI - PRELU is blank.
When i run the report rhintecheck i find my entry. but when i run the report rhinte30 the report does nothing!?
I have no more idea!!!!!!!!!!!!!!!!!!!!!!!

Hi
Please check the following:
1) table T77S0
PLOGI PLOGI 01 ( 01 is your plan version)
PLOGI ORGA - X
2) Report RHINTE30 - Dates when the changes should be effective in IT 0001
3) You have sufficient authorisations to the objects & relationships.
Thanks & regards
UR

Change of Cost center for Assets --- AS02

Hi,
I have one asset 1234. for that Already we closed the year 2008.
In the Asset master we are using Cost Center -- ABCD, but from 2009.04.01 m i want to change the Cost Center -- XYZ. For that i tried to change the cost center in following way;
1. In AS02-- Time independent data-- i enter the new interval effective from 2009.04.01 then i was saving the asset master,
But while saving one error Msg is coming
"Automatic Transfer is not Possible for Asset 1234. "
Details of SAP message :
"   Automatic transfer is not possible for asset E8 840200000066-0
    Message no. AMOC 001
Diagnosis
    You changed assignments to organizational units for asset E8
    840200000066-0. The indicator for 'time-independent organizational
    units' is set for this company code in Asset Accounting Customizin
    This means that the system is supposed to create a transfer docume
    automatically.
    However, asset E8 840200000066-0 manages one of the following:
    o   Open items
    o   Investment measures
    o   Down payments
    Therefore, the system could NOT automatically create a transfer document. "
So please tell me , How can i change the Cost center in Asset Master.
Sachin

We have many company codes and all company codes have same configuration and All company code have time independent settings.So why this message is only coming for this asset class and in this company codes only. I tried in other company codes with same asset class, but its working, No error message is coming.

Change of Cost Center in Asset Master for Investment measure (AuC) Assets.

Hi,
We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ?
Can anyone help me ?
Regards,
K.S.K

Hi Kattula,
We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
This would solve your issue.
Thanks & Regards
FICO GSupport team.
RK & IK.

Change Cost Center for 6000 assets at the backend.

Hi Gurus,
Can anyone please explain the process of changing the cost centers for multiple assets at one time? We have to change the CCs for around 6000 assets.
Thanks,
Tushar

Hi
LSMW is an appropriate solution.
For more, Please refer these --
How to Mass change cost centers for assets
Asset mass change - cost centers.
Rgds,
Zub

Change cost center business area in one year

HI,
Our user create a cost center and wrongly key in a business area value. The cost center valid from Jan 13 2010 to Dec 31 9999.
And already some transaction data post to this cost center.
Now i want to delete the business area in the cost center master data, SAP will give error message.
Do you know any way to delete the business area for the cost center?
Or if i debug to change the business area (i do it successfully in quality system), whether it will have some other problem?
Thanks.

Hi David,
You are right. It looks like you can only change business area on a cost center master for the period starting from next fiscal year.
You can just create a new cost center with correct business area and use transaction KB61 to transfer the postings from the old cost center to the new one. If you have NewGL turned on for business area reporting, GL-CO reconsiliation is automatic. Otherwise, you will need to run KALC after executing KB61 or at the end of month. Of course, after all is done, you would block the old cost center from any transaction and delete the cost center for the period starting from next fiscal year.
Regards,
Ming

Difference between cost center & Responsible cost center in asset master

I want to know difference between cost center & responsible cost center in asset master on following perspective.
1. Financial accounting veiw -
2. Business & report veiw.
I have read through F1 help
Cost Center
Key uniquely identifying a cost center.
Use
The SAP system uses the cost center assignment in the asset master record to determine the cost center affected when the following types of asset posting are made:
Fixed asset depreciation
Gain/loss from asset sales
Cost center responsible for asset
Cost center that is responsible for the asset, but which does not carry the depreciation for the asset.
Example
For example, the cost center "vehicles" can be responsible for all vehicles, while other cost centers carry the depreciation for the vehicles
I can understand from F1 what will be the impact on finance accounting. My question is how it helps in reporting etc & business logic for using responsible cost center. Which report will be usefull to see data at responsible cost center.
Regards
T

Closed

FI-AA / CO - Impossible to input cost center in asset acquisition

Hello everyone,
I have a question about asset acquisition postings (transaction ABSO).
In first item of the document (with posting key 70) i click on 'Additional account assignement' but fields 'Cost center' and 'Profit center' are both locked (no possible entries).
I state that:
AA
1) Additional account object as KOSTL (Cost center) is active in AA customizing
2) Account assignment object for dep. area 01 (trsx. ACSET) displays KOSTL for '*' all Asset transaction type
GL
1) In Account master data field status group provides Cost center as optional entry
CO
1) Cost center is active for the relating controlling area
2) The acquisition account is correctly opened as statistical cost element
The same thing happens if i try to post with transaction AB01 instead of ABSO, but if I remove 'A - Asset' from transaction OAMK (Change control of reconciliation Accounts) i could input cost center in a generic FI posting.
How i could insert cost center code in transaction ABSO for the first item of the document ?
Why the transaciont did not inherit cost center from Asset master data ?
Some parameterization missed in CO customizing (or GL or AA) ?
Thanks and bye
M.M.
Edited by: Armidoro Marella on Jul 8, 2010 4:01 PM

Hi,
Please check the setup as follows:
1. Go to Financial Accounting -> Asset Accounting -> Integration with the general ledger -> Additional account assignment
     objects -> Activate Account Assignment Objects. Is the filed 'Agreement' is set as 'X' for object COST CENTER ? If this
     indicator is checked, you are not able to enter cost center when posting acquisition, even via tcode F-90. This ensures the
     consistency of the cost center value with that in asset master data.
     However, the cost center will not be inherited from asset master data before you change message status, as described in
     next step.
2. Go to OBA5. Enter Application Area 'KI', click Enter and then switch off message 098.
Hope this helps...

Could not changed cost center field in document type RE - FSG

Dear Experts,
I would like to change 'cost center field' in act document type RE (invoice receipt) through transaction FB02
I have changed the field of 'cost center' in field status group in OBC4 and OB41 (posting key 50 and 86)
The field staus group both in OB41 and OBC4 are already set as 'optional entry' but field of cost center is still could not be changed/edit (grey area).
Kindly advice
Thank you.

Hi Chandra,
Can you please details the coding part if you can remember ..so that would be helping me lot...Since it's production issue , we have implement immd.
Regards,
Lalit
Edited by: Lalit Sharma on Dec 24, 2009 6:45 AM
=======================
This problem can be closed. I got the note.
Edited by: Lalit Sharma on Jan 12, 2010 12:50 AM

Change cost center

Hi,
I have as asset which was capitalized on 2005 with cost center xxx
now requirement is that i need to change cost center to particular asset
Ok it is allowing me to change but these 3 years data will be there in new cost center or old cost centers
when i run a report how can i do it
It is very urgent
I will assigin points
Thanks and Regards
RAdha

hi Radha
the thing is that now u want to change the cost center for that particular asset but that asset was earlier in differnt cost center so for reporting purpose that data will be there in that cost center only if u dont want that data there in that cost center u can repost it to new cost center

Change cost center in AS02-urgent

Dear All,
I am running AS02 and want to change cost center. For asset 1200 and sub number 0, the cost center can be changed. But for sub number 3, I can not change the cost center since the cost center field is in grey colour(can not be changed).I have tried with adding new interval but it can not change too.
Please advice.
Thank you

Dear Purti Kristin,
In IMG under
Financial Accounting (New) -> Asset Accounting -> Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data -> Choose your Layout-> Double Click on Logical Field Groups option on the left pane of the screen -> Select Time-Dependent Data -> Double click on Field Group Rules on the left pane of the screen -> Make 'Cost Center' Opt or Req as per your requirement
or
Financial Accounting -> Asset Accounting -> Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data -> Choose your Layout-> Double Click on Logical Field Groups option on the left pane of the screen -> Select Time-Dependent Data -> Double click on Field Group Rules on the left pane of the screen -> Make 'Cost Center' Opt or Req as per your requirement
Regards,
Naveen.

Depreciation Posting after changing cost center in Asset

Similar Messages

Maybe you are looking for