Description text from IT1002?

Hi all,
I'm trying to figure out where to pull the description text from IT1002 for a specific object.  I assume field TABNR on HRP1002 points to where the text is stored but I'm not sure where to go from there.  Any suggestions are appreciated.
Cheers,
Sharon

I know this is answered already but here is another alternative:
use function module 'RH_READ_INFTY_TABDATA'
Paul

Similar Messages

  • 'role' description text from AM SDK

    PROBLEM:
    how do you get the role description text field from the AM SDK? this should be possible using an AMUser or AMRole object. 'roles' and 'policies' have a description field that we can use to tie specific data with that condition. i was advised to try and use a statement like the following
    role.getAttribute("iplanet-am-role-description");
    -- or --
    role.getAttribute("description");
    RESULT:
    both return empty strings or sets (refer to code below). i know that the data is there, it shows up in the amconsole for roles and policies. also, using the admin console for the directory server, the description information is displayed.
    i've also run cmd line ldapsearches against the directory server, looking for 'description' and 'iplanet-am-role-description'; these return empty, no error code. it's advertised as an attribute so i believe i should be able to find it. as previously stated using the admin console java app, those attributes associated with the 'role' object at the dc=mycompany,dc=com level are displayed, but not from a command line ldap search. it should also be noted that the performance of looking at a user object, w/ the admin console tool, is very slow. which may point in the direction that the admin console is also gathering the users, role, policy information from other objects w/in ldap. for example looking a user's definition, it displays amrole and amroledn, which are not directly stored attributes w/in the user's object.
    SYSTEM:
    -Sun JES 2004Q2
    -SunOS 5.9 Generic_117171-09 sun4u sparc SUNW,Sun-Fire-V240

    Hi
    To view the GL line item in Country Chart Account, Run Report S_ALR_87012332. In selection field choose alternate account in outout control.
    System will give the Detail as per Country Chart of Account.
    Thanks
    GG

  • How can I display Account description text from country-specific CoA ?

    The below quote is from the description of Country Chart of Accounts in OBY6.
    "The essential programs in General Ledger can output either the unique worldwide number or the country-specific number and the corresponding text."
    I am not able to figure out how to configure reports so that the country-specific number and corresponding text is displayed in programs. When I run reports such as FBL3N, the program is picking up information from the global CoA. Please help!

    Hi
    To view the GL line item in Country Chart Account, Run Report S_ALR_87012332. In selection field choose alternate account in outout control.
    System will give the Detail as per Country Chart of Account.
    Thanks
    GG

  • How to find tech nodename based on node description (text) from hierarchy

    Hi Friends,
    There is a 0ACCOUNT hierarchy. If you open the hierarchy thru info objects maitenance screen using "Maintain Hierarchies", it is displayed in hierarchical arrangement.
    Here we give text description to 0HIER_NODE object to denote the title of group/category; a technical name is also assigned in NODENAME column in /BI0/HACCOUNT table for each 0HIER_NODE description. And child node contains actual values of 0ACCOUNT.
    My question is, I want to find out the technical name (NODENAME) from the title text description (0HIER_NODE) of group/category. where is the relation between text descripion  (0HIER_NODE) and technical name (NODENAME) is stored?
    Any help will be appriciated.
    Regards,
    Purvang

    Hi,
    Go to se11 check the contents of the table RSTHIERNODE with the parameters LANGU (your language) HIEID = A and NODENAME the technical node name of a hierarchy.
    There you go.
    Diogo.

  • How can I remove the 'Qty' text from individual product descriptions?

    I didn't know if this was possible or not... I've recently taken the reins of handling an ecommerce site that had been published before I got on board. My boss wants me to remove the 'Qty:' description from some products because the image shown for some products is a misleading description of the actual quantity available (i.e. there is a picture that shows a stack of conveyors parts, and it says 'Qty: 1' to represent one 'stack' of conveyor parts - this confuses customers into thinking there's only one individual conveyor part available however). To avoid any confusion he requested that I remove the 'Qty' text from similar images. I see that you can change the 'In Stock' amount of a particular product underneath the 'Inventory' tab of the 'Products' menu, but I didn't know if it was possible just to remove the quantity description altogether without just typing the quantity in at zero. This is likely a strange question but I didn't know where else to ask! I would appreciate any help or advice Thank you

    Hi ewhelhalu,
    I just figured out a way to do it, but it's a little weird and complex, and I have no idea what the consequences for editing this .plist string might be. I'm thinking it'll be OK, but you never know what might happen when you screw around with Apple's intentions.
    So if you have the Developer Tools on your install of OS X, you can use the Property List Editor to edit the Dock files. (If you don't have this program, you can use a program like [Pacifist|http://www.charlessoft.com> to selectively install stuff from your Leopard disk).
    The file you're interested in is within Macintosh HD > Users > Your Username > Library > Preferences, and it's called com.apple.dock.plist. Open that up with Property List Editor, and open the arrow drop-down next to "Root." The lines you're looking for are "persistent-apps" (the left side of your Dock) and "persistent-others" (the right side). If you open the drop-down arrows, you'll see there are numbers below each. The numbers correspond to your Dock items, from left to right.
    If you click on drop-arrows by the numbers, a sample hierarchy looks like this: 0 > tile-data > file-label. It's the "file-label" string that you want to edit. Just make it ("it" being the name of the icon under the "value" column) blank, save the file, go into Terminal and type "killall Dock" without the quotes, and your Dock icon should appear without a name. You'll have to do this for all of them.
    I should insert the usual caveats here about backing up beforehand and making sure that you have a copy of the .plist file before you start tweaking it so that you can replace it if things go wrong. And perhaps someone with more knowledge of Terminal or third-party apps than I have will come along and suggest a simpler solution. But that's the only one I have.
    Hope that helps!
    —Hazy

  • Description Text is missed from transaction F-43 "BSEG-SGTXT"

    Hi all, I have a problem when create Vendor Invoice in transaction F-44, the user create a discount document to a Vendor on transaction F-43 and write adescription text for identify it. But the text "Standard Historical" is missed when user set Vendor Invoice. The text is changed to another text from the table t003t.
    The document is type 'AB' and have settings for Sap Finnacial Acount to this type of document.
    I want that this description stand with a document created in F-43.

    The problem was solved after set parameters in transactions OBIA and OBIB.
    "In order to get the field transferred you have to specify in the appropriate clearing rule in transaction OBIA. The system should then transfer it to the new document.After that you should assign to the correct account type in transaction OBIB."

  • Copy text from action description to following acitivity

    Hello,
    I'm using the opportunity with sales methodology and I've created my own action profile. In the actions in the action profile, I've entered an action description text. In the opportunity, I use the sales assistant and there I can see the action description text as a note. When I activate the action, a task or appointment is created with reference to the opportunity. How can I set up the system so that the action description text is copied to the text note in the task or appointment?
    Kind regards,
    Johan Wigert

    Hello Mangesh,
    Thank you for your answer.
    I already have this customizing as standard. I am looking how to copy action description from the action definition to the follow up task.
    Like you described, suppose I am creating a Task from the Opportunity as a follow-up automatically with action (Method: COPY_DOCUMENT) and I want that the action description is copied to the text 'note' in the task.
    Do you have any suggestions?
    Regards,
    Hanoch

  • On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

    On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

    If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
    It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • How to Load Master Data Text  from Multiple Source Systems

    Situation:  Loading vendor master (text) from two systems.  Some of the vendor keys/number are the same and so is the description.  I understand that if I was loading Attributes, I could create another attribute such a source system id and compound it to 0Vendor.  However, I don't believe you can do the same when loading text. 
    Question:  So, how can I load duplicate vendor keys and description into BW using the *_TEXT datasource so they do not overwrite?
    Thanks!

    Hi,
    Don't doubt, it'll work!
    Sys ID as compound to 0Vendor.
    If you doubt about predefined structure of the *_TEXT datasource and direct infosource, then use a flexible infosource. Maybe you'll have to derive the sys ID in a routine or a formula.
    Best regards,
    Eugene

  • Can not copy text from AI CC or AI6 in to the file name

    I have an AI file with 80+ UPC codes that I need to separate in to individual files. Each UPC has a descriptor but when I copy the text and then try to paste it as file name it will not paste. I use this same process regularly in InDesign when I design print ads. Each print ad has a unique item number that prints with the copyright line so I simply copy and paste that information when I do the save.
    Under File Handling and Clipboard both PDF and AICB are on. I've tried this in AICC and AICS6. I also tried different files. Same issue. Any suggestions? I really don't want to have to type 80 some descriptions which are very lengthy. 

    I can not copy the text from Illustrator in to any OS X application/function (filename, Mail, Text Edit, ect). I can copy in to InDesign, Photoshop, Flash, and other other Adobe product. I can copy in to Word as well. I guess my work around will be Word.
    And the opposite is true. I can copy text from any other Adobe application to any OS X application/function with no issues.
    I guess my work around will be to OCR the text from Acrobat and open in Word. The descriptors have to be 100% accurate and some of them are pretty long.

  • Purchase Order Description Text

    Hi All,
    I am trying to display a POD text but it is cutting off, can anyone help to write the purchase order description text. Currently it can only display only 130 characters.
    gv_repid = sy-repid.
    SELECT SINGLE ebeln INTO i_tab-ebeln FROM ekpo  WHERE matnr = i_tab-matnr.
      line_id     = 'BEST'.
      line_name   = i_tab-matnr.
      line_lang   = sy-langu.
      line_object = 'MATERIAL'.
    CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                      = line_id
          language                = line_lang
          name                    = line_name
          object                  = line_object
        TABLES
          lines                   = i_tabs
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc <> 0.
      ENDIF.
      LOOP AT i_tabs.
        CONDENSE i_tabs-tdline.
        CONCATENATE i_tab-text i_tabs-tdline INTO i_tab-text SEPARATED BY space.
        MODIFY i_tab TRANSPORTING text.
      ENDLOOP.
    Regards,
    Fred

    Hi
    This is my code:
    FORM reading_text.
    Begin of i_tab occurs 0,
       text(150) type c
    end of i_tab.
      gv_repid = sy-repid.
    SELECT ebeln INTO i_tab-ebeln FROM ekpo  WHERE matnr = i_tab-matnr.
        EXIT.
      ENDSELECT.
      line_id     = 'BEST'.
      line_name   = i_tab-matnr.
      line_lang   = sy-langu.
      line_object = 'MATERIAL'.
    ALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                      = line_id
          language                = line_lang
          name                    = line_name
          object                  = line_object
        TABLES
          lines                   = i_tabs
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc <> 0.
      ENDIF.
      LOOP AT i_tabs.
        CONDENSE i_tabs-tdline.
        CONCATENATE i_tab-text i_tabs-tdline INTO i_tab-text(150) SEPARATED BY space.
        MODIFY i_tab TRANSPORTING text.
      ENDLOOP.
    CALL FUNCTION 'SAVE_TEXT'
        EXPORTING
          header = i_tab-text
        TABLES
          lines  = i_tabs.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    It's giving me a dump:call_function_conflict_leng
    There are other fields in an internal table.
    Regards,
    Fred
    Edited by: Fred Mogaadile on Sep 26, 2008 6:17 AM
    Edited by: Fred Mogaadile on Sep 26, 2008 6:19 AM

  • Copy Text from Order to Invoice

    Hi All,
    We are trying to copy the line text from the order line item to the invoice. But we are facing a problem that the header text is getting copied to the invoice correctly but the line text is not copied in to the invoice.
    The data is not getting copied to BEA_BDI from CRM_ORDERI whereas the data gets copied from CRM_ORDERI to BEA_BLI.
    Can someone help with this
    Regards
    Rekha Dadwal

    Hi
    The item text was getting determined using the current determination procedure till May. In May we did a support pack upgrade and this functionality stopped working.
    <b>The procedure followed is as follows</b>
    Text Object      BEA_BDI
    Description      Texts for Billing Item (BE)
    Text Det.Proc.   ZBDI0002
    Dscrptn Proc.    Billing Item Text
    Text Type        0001
    Description      Sales text
    Sequence        0010
    Changes         Display
    Transfer Type   Copy
    Access Sequence ZBDI0001
    Desc. Access    Text Type 0001
    Text Object      BEA_BDI
    Description      Texts for Billing Item (BEA
    Access Sequence  ZBDI0001
    Desc. Access     Text Type 0001
    Sequence         0100
    Ref. Object     BEA_DLI
    Ref. Object     Texts for Billing Due List
    Ref. Text Type  0001
    Ref. Text Type  Sales text
    Regards
    Rekha Dadwal

  • Need to display variable descriptive text in a report

    Does anyone know of a way to display the descriptive text for user entry variables in Crystal Reports? I've tried a couple of methods in the past (a subreport going against master data and building an array of text valued from the data) but each has method has some significant drawbacks. How are customers dealing with this right now? I have been encouraging them to be satisfied with the technical names, but that doesn't go over very well.

    Look like no one had any thoughts. I'll just close this one down for now.

  • Transfer of Service master short text  from PR to PO

    Hi All,
    We have a scenario where we use Generic service number to order one time services. Based on the requirement we keep on changing the short text (description) of the service master in PO or Purchasing requisition. The issue is - Short text on generic service master is changed in PR but it is keep on reverting to original short text as in service master while converting PR to PO. . 
    For Example :
    Service master - Code - 100001 - Description - "Generic Corp Miscellaneous Services"
    I created a PR, included service no 100001 and changed the description of short text to - "Fixing tiles at foyer". Now when I converted PR to Purchase order service description should transfer to PO. But it is showing as 'Generic Corp Miscellaneous Services'. After investigation I found it is coming from the Contract that is linked with the PR as source of supply. And if I removed the Contract from the source of supply short text transfers from PR to PO. So Contract get precedence over PR.
    The requirement is - short text of service master should transfer from PR even when source of supply is Contract. It means always transfer short text from PR to PO not from contract. Is there any user exit/ config or change to ABAP code is required.
    Any help is greatly appreciated.

    Hi
    If you have document management system active in your system and if it the document type of documnet (which you created in CV01N) has link object PO and PR. Surely it will be transafred from PO to PR. But if you have added document in service object in Me52N then it will never go to PO automatically.
    Thanks and Regards
    Antony

  • Indent /tab position for text from INCLUDE texts in SAPscript

    Hi, ABAP colleagues!
    Need your help on this sapscript problem:  How to align texts taken from "INCLUDE TEXT" in SAPscript, according to tab defined in Paragraph Format?
    Or, how to control tab positions for texts which were extracted from “INCLUDE text” commands in SAPscript?
    I defined a paragraph format with tab stop at 8 CH so that with 2 commas (,,) my text will be displayed there.  However it always appears to the left (e.g. 1st column) and not indented at the proper column for description/text (e.g. which is in second column). 
    Pls help, bec a different heading and information is not acceptable to client for the Thailand characters. 
    Above is the description of the problem.  Below are some technical details.
    For specific example, I am editing Zversion of standard sap MM form MEDRUCK Window Main -  Text Element Item Text.
    BG ,,&TTXIT-TDTEXT&
    /: INCLUDE &T166P-TXNAM& OBJECT &T166P-TDOBJECT& ID &T166P-TDID&
    /: NEW-PARAGRAPH BG
    So far, tried these approaches:
    PARAGRAPH
    NEW-PARAGRAPH
    LANGUAGE '2'
    THANGSAN font
    Any ideas?
    Thank you so much in advance for all your help. Our project team will really appreciate it. May the Lord bless you as we go through our SAP work!
    Sincerely,     
    Celeste

    Hello Caleste,
    Please let me know what settings you have done to solve this issue.
    Help me with steps for Spool Request/Print settings.
    Regards!!
    Surya

Maybe you are looking for