'role' description text from AM SDK

PROBLEM:
how do you get the role description text field from the AM SDK? this should be possible using an AMUser or AMRole object. 'roles' and 'policies' have a description field that we can use to tie specific data with that condition. i was advised to try and use a statement like the following
role.getAttribute("iplanet-am-role-description");
-- or --
role.getAttribute("description");
RESULT:
both return empty strings or sets (refer to code below). i know that the data is there, it shows up in the amconsole for roles and policies. also, using the admin console for the directory server, the description information is displayed.
i've also run cmd line ldapsearches against the directory server, looking for 'description' and 'iplanet-am-role-description'; these return empty, no error code. it's advertised as an attribute so i believe i should be able to find it. as previously stated using the admin console java app, those attributes associated with the 'role' object at the dc=mycompany,dc=com level are displayed, but not from a command line ldap search. it should also be noted that the performance of looking at a user object, w/ the admin console tool, is very slow. which may point in the direction that the admin console is also gathering the users, role, policy information from other objects w/in ldap. for example looking a user's definition, it displays amrole and amroledn, which are not directly stored attributes w/in the user's object.
SYSTEM:
-Sun JES 2004Q2
-SunOS 5.9 Generic_117171-09 sun4u sparc SUNW,Sun-Fire-V240

Hi
To view the GL line item in Country Chart Account, Run Report S_ALR_87012332. In selection field choose alternate account in outout control.
System will give the Detail as per Country Chart of Account.
Thanks
GG

Similar Messages

Description text from IT1002?

Hi all,
I'm trying to figure out where to pull the description text from IT1002 for a specific object. I assume field TABNR on HRP1002 points to where the text is stored but I'm not sure where to go from there. Any suggestions are appreciated.
Cheers,
Sharon

I know this is answered already but here is another alternative:
use function module 'RH_READ_INFTY_TABDATA'
Paul

How can I display Account description text from country-specific CoA ?

The below quote is from the description of Country Chart of Accounts in OBY6.
"The essential programs in General Ledger can output either the unique worldwide number or the country-specific number and the corresponding text."
I am not able to figure out how to configure reports so that the country-specific number and corresponding text is displayed in programs. When I run reports such as FBL3N, the program is picking up information from the global CoA. Please help!

Hi
To view the GL line item in Country Chart Account, Run Report S_ALR_87012332. In selection field choose alternate account in outout control.
System will give the Detail as per Country Chart of Account.
Thanks
GG

How to find tech nodename based on node description (text) from hierarchy

Hi Friends,
There is a 0ACCOUNT hierarchy. If you open the hierarchy thru info objects maitenance screen using "Maintain Hierarchies", it is displayed in hierarchical arrangement.
Here we give text description to 0HIER_NODE object to denote the title of group/category; a technical name is also assigned in NODENAME column in /BI0/HACCOUNT table for each 0HIER_NODE description. And child node contains actual values of 0ACCOUNT.
My question is, I want to find out the technical name (NODENAME) from the title text description (0HIER_NODE) of group/category. where is the relation between text descripion (0HIER_NODE) and technical name (NODENAME) is stored?
Any help will be appriciated.
Regards,
Purvang

Hi,
Go to se11 check the contents of the table RSTHIERNODE with the parameters LANGU (your language) HIEID = A and NODENAME the technical node name of a hierarchy.
There you go.
Diogo.

How can I remove the 'Qty' text from individual product descriptions?

I didn't know if this was possible or not... I've recently taken the reins of handling an ecommerce site that had been published before I got on board. My boss wants me to remove the 'Qty:' description from some products because the image shown for some products is a misleading description of the actual quantity available (i.e. there is a picture that shows a stack of conveyors parts, and it says 'Qty: 1' to represent one 'stack' of conveyor parts - this confuses customers into thinking there's only one individual conveyor part available however). To avoid any confusion he requested that I remove the 'Qty' text from similar images. I see that you can change the 'In Stock' amount of a particular product underneath the 'Inventory' tab of the 'Products' menu, but I didn't know if it was possible just to remove the quantity description altogether without just typing the quantity in at zero. This is likely a strange question but I didn't know where else to ask! I would appreciate any help or advice Thank you

Hi ewhelhalu,
I just figured out a way to do it, but it's a little weird and complex, and I have no idea what the consequences for editing this .plist string might be. I'm thinking it'll be OK, but you never know what might happen when you screw around with Apple's intentions.
So if you have the Developer Tools on your install of OS X, you can use the Property List Editor to edit the Dock files. (If you don't have this program, you can use a program like [Pacifist|http://www.charlessoft.com> to selectively install stuff from your Leopard disk).
The file you're interested in is within Macintosh HD > Users > Your Username > Library > Preferences, and it's called com.apple.dock.plist. Open that up with Property List Editor, and open the arrow drop-down next to "Root." The lines you're looking for are "persistent-apps" (the left side of your Dock) and "persistent-others" (the right side). If you open the drop-down arrows, you'll see there are numbers below each. The numbers correspond to your Dock items, from left to right.
If you click on drop-arrows by the numbers, a sample hierarchy looks like this: 0 > tile-data > file-label. It's the "file-label" string that you want to edit. Just make it ("it" being the name of the icon under the "value" column) blank, save the file, go into Terminal and type "killall Dock" without the quotes, and your Dock icon should appear without a name. You'll have to do this for all of them.
I should insert the usual caveats here about backing up beforehand and making sure that you have a copy of the .plist file before you start tweaking it so that you can replace it if things go wrong. And perhaps someone with more knowledge of Terminal or third-party apps than I have will come along and suggest a simpler solution. But that's the only one I have.
Hope that helps!
—Hazy

Description Text is missed from transaction F-43 "BSEG-SGTXT"

Hi all, I have a problem when create Vendor Invoice in transaction F-44, the user create a discount document to a Vendor on transaction F-43 and write adescription text for identify it. But the text "Standard Historical" is missed when user set Vendor Invoice. The text is changed to another text from the table t003t.
The document is type 'AB' and have settings for Sap Finnacial Acount to this type of document.
I want that this description stand with a document created in F-43.

The problem was solved after set parameters in transactions OBIA and OBIB.
"In order to get the field transferred you have to specify in the appropriate clearing rule in transaction OBIA. The system should then transfer it to the new document.After that you should assign to the correct account type in transaction OBIB."

Copy text from action description to following acitivity

Hello,
I'm using the opportunity with sales methodology and I've created my own action profile. In the actions in the action profile, I've entered an action description text. In the opportunity, I use the sales assistant and there I can see the action description text as a note. When I activate the action, a task or appointment is created with reference to the opportunity. How can I set up the system so that the action description text is copied to the text note in the task or appointment?
Kind regards,
Johan Wigert

Hello Mangesh,
Thank you for your answer.
I already have this customizing as standard. I am looking how to copy action description from the action definition to the follow up task.
Like you described, suppose I am creating a Task from the Opportunity as a follow-up automatically with action (Method: COPY_DOCUMENT) and I want that the action description is copied to the text 'note' in the task.
Do you have any suggestions?
Regards,
Hanoch

Help needed in getting the Role Description from BOL Entities

Hi All,
I am trying to retrieve BP Role and BP Role Description and display the details at the top of account over view page.
I am fetching the BP Role details using 'BuilRolesRel'. but i am not able to find any BOL Query to get Role Description.
Any pointers on this is really very very helpful.
Thanks,
Udaya

Hello Udaya,
under BuilRolesRel there is a entity BuilRoles and this entity has an Attribute RLCTITLE.
this is a Description of the role.
Good Luck
Eli Steklov
Please Reward Points if it Helped

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Copying text from carrier into PO

I have set up the following process. I linked the standard partner role CR carrier to the vendor master and the purchase order to make carrier determination possible.
Meaning in my vendor master I added a carrier, meaning when I create a PO for that vendor the carrier will be assigned. Now I have a text on carrier level "shipping instructions" which I would like to see on my PO. But when I create my PO and I check the header text "shipping instruction", the text from the vendor is copied and not the one from the carrier.
When I check customizing I can define all kind of copying rules but I'm not able to refer or set up a copy ole based on partner roles.
Is there a way doing this without enhancement?
Thanks
Walter Goris

Thanks for your prompt answer, but the problem is that the carrier text is stored at carrier level which is only assigned with a partner role to the vendor. Creating another text on vendor level isn't a solution as I can have more than 1 carrier for a vendor. During PO creation the correct carrier will be selected from the partner role. at that moment the text from the carrier should be taken over.
Example: vendor A has carrier X and carrier Y. Carrier X has a text X and carrier Y has a text Y.
When I create a PO for vendor A when I save the system will bring me a pop-up to choose between carrier X & T. When I select X, the text X should appear on my PO but in my current set up I get the text from vendor A.
You see a solution for that
Thanks

How to Load Master Data Text from Multiple Source Systems

Situation: Loading vendor master (text) from two systems. Some of the vendor keys/number are the same and so is the description. I understand that if I was loading Attributes, I could create another attribute such a source system id and compound it to 0Vendor. However, I don't believe you can do the same when loading text.
Question: So, how can I load duplicate vendor keys and description into BW using the *_TEXT datasource so they do not overwrite?
Thanks!

Hi,
Don't doubt, it'll work!
Sys ID as compound to 0Vendor.
If you doubt about predefined structure of the *_TEXT datasource and direct infosource, then use a flexible infosource. Maybe you'll have to derive the sys ID in a routine or a formula.
Best regards,
Eugene

How to add a role description to the Role Library:Role Information Column

Hi to all,
I have an interesting question.I have a task to show a role description in the role sorting table information column.Is there any way to get this parameter ?
I tried with waveset.roleinfos.info.description but nothing happened.I saw that in some forms is used waveset.availableRoleInfos[$(rolename)].info.description, but i can not understand what is this parameter actualy for and from where it comes (and i did not get anything from it either when i tried with it).
So my question is is there any way i can add this description attribute to the Information role column ?

Hi Mariana,
one way is to use the role upload if you want to use existing BI roles in Portal:
Here are more infos: http://help.sap.com/saphelp_nw04s/Helpdata/EN/9d/8c174082fe1961e10000000a155106/frameset.htm
Regards,
Adem

Using browser javascript to copy selected text from a pdf file opened in Air app.

I have posted this question on reader forum as well, but I think it is more suited here...
I am trying to create a note-taking application in air. I want to extract selected text from pdf file as a string object or to the clipboard.
Obviously, all pdfs in my local storage will not be scripted to recieve postMessages and act accordingly, and that is not practical either. So, my problem is, how can I copy the selected text in the pdf file (opened as an object in htmlloader within my Air app) to clipboard or directly in another control by say clicking a button in air application? I suppose, this is possible using javascript, however, I don't know which reader methods are exposed to the wrapper htmlloader control. In short, I want to execute app.execMenuItem("Copy") command through htmlloader javascript. Any alternate solutions are also welcome.
This is similar to passing inbuilt commands/methods/functions (of adobe reader) to pdf-reader plugin embedded in a webpage via javascript. This is possible in IE where the pdf is rendered as activex object, and hence JSObject interface of pdf document/reader is accessible to the browser javascript. I have also read that this same JSObject is accessible to VB as interface for IAC, so as the Air is Adobe's own product, I was wondering if equivalent of JSObject is accessible to htmlloader control as well.
Thanks in advance...
Mits

Thank you Thom for your reply...
from
http://www.adobe.com/devnet/acrobat/javascript.html
...Through JavaScript extensions, the viewer application and its plug-ins expose much of their functionality to document authors, form designers, and plug-in developers...
As it is explicitly mentioned, that the functionality of adobe reader are exposed for plugin development, I thought someone here might have used external javascript to execute some safe methods in adobe reader. The functionality (i.e. external javascript interface-JSObject) is already available for VB programmers to develop IAC. Further, the Acrobat SDK example called "AcroPDFinHML" shows how one can embed a pdf-reader in a html page and execute some safe methods (like gotonextpage(), zooming etc.) in IE as ActiveX plugin. I have checked it myself for adobe reader 9, and it works perfectly, so there is no security issue as such to implement the same for another browser (like in my case, the htmlloader control in flex/air app).
I intend to create a note taking application in air, where it is very much required that I should be able to copy selected text from various pdf documents, that are open in my app, and subsequently paste/collect/save the collected notes and process them afterwords (offcourse, from the pdfs that allow me copying text). However, it is not happening for me here. As the pdfs are opened through adobe reader plugin, it does not register the copy command executed by my air app. It registers the system level copy command (by keyboard shortcut Ctrl+C), but my air app has no way to execute the system level copy command programmatically. So I am kind of stuck here...
Thanks again for your reply. Having known what am I intend to accomplish, any other (may be alternative) solutions will be appreciated nonetheless...
Mits

BSP Error when copying text from email to Note section of a transaction

Hi All,
We are using CRM2007 for both the Interaction Centre and Sales Web Client.
When a user is creating a transaction in both roles, if one copies a piece of text from an email into the note section of a transaction at times the web client crashes and gives a BSP error.
It seems that cetain symbols are not recognised and cannot be converted when they are copied into the note section. The symbols I have noticed this to occur on are the dash symbol and the apostrophe (') symbol.
The symbols are fine when they are typed in directly, the issue only occurs if they are copied in.
The web client cannot handle this exception and falls over as a result.
However, if the text is copeid into the note section of a transaction in CRM online, any symbols it cannot convert correctly automatically convert to a hash (#) symbol.
Has anyone come across this issue before? Or have an idea as to how it could be resolved?
Even if it was possible for the webclient to convert any unknown symbols automatically into a hash (#) symbol like CRM Online so the web client would not fall over on save of a transaction.
Your help would be greatly appreciated.
Thanks,
Jonathan

Hi Inderjeet.
Thanks for the reply I guess we could not get the fiddler trace as we are getting this error while i am copying the data to excel file which is present on drive from SharePoint this is not on a browser. Correct me if I am wrong
And Alternate access mappings and IIS bindings are perfect.
Thanks,
Neela Krishna.

Can not copy text from AI CC or AI6 in to the file name

I have an AI file with 80+ UPC codes that I need to separate in to individual files. Each UPC has a descriptor but when I copy the text and then try to paste it as file name it will not paste. I use this same process regularly in InDesign when I design print ads. Each print ad has a unique item number that prints with the copyright line so I simply copy and paste that information when I do the save.
Under File Handling and Clipboard both PDF and AICB are on. I've tried this in AICC and AICS6. I also tried different files. Same issue. Any suggestions? I really don't want to have to type 80 some descriptions which are very lengthy.

I can not copy the text from Illustrator in to any OS X application/function (filename, Mail, Text Edit, ect). I can copy in to InDesign, Photoshop, Flash, and other other Adobe product. I can copy in to Word as well. I guess my work around will be Word.
And the opposite is true. I can copy text from any other Adobe application to any OS X application/function with no issues.
I guess my work around will be to OCR the text from Acrobat and open in Word. The descriptors have to be 100% accurate and some of them are pretty long.

'role' description text from AM SDK

Similar Messages

Maybe you are looking for