Design Concern Using PI

Can any one tell me:  what way to call these kind of interfaces using XI:
1. Our client using code1 applications for address check.
we need to call these code1 applications through BAPI and send response back to BAPI.
Code1 applications are third party applications and using custom build database.
They are using some APIs(JAVA and C) for build this applications.
My question is : Will XI able to call  these code1 applications using those APIs?
FYI :If I see the code1 application ,its like front end screen.
Flow like this:
BAPI(Request)->XI----->Code1
Code1(Response)XI----->BAPI
I am looking for design concerns about this kind of integrations?
Appreciated your time.
Thanks,
PILearn

Hi,
can you try using other tools like Altova XMLSpy or SOAP UI Client to send request to SOLMAN?
If that works then it is some prob with the request from PI7.1 . If that does not work.. then you have to look at SOLMAN side what could be the problem.
Regards
Anand

Similar Messages

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    Workaround
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Notes
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    cmdlet.
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    Hello,
    I have the following scenario for the installation of EPM 2013 environment:
    1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
    1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
    After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
    Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
    "Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
    I've tried:
    a. Restart SPD2013;
    b. Restart Server 2013 and Sharepoint Workflow 1.0;
    c. Reinstall and reconfigure Workflow 1.0
    And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
    Can anyone help me, I'm in the middle of a deployment to a customer.
    Print of alert

    How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
    http://technet.microsoft.com/en-us/library/cc262108.aspx
    "If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
    templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
    You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

  • Custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list

    I  am looking for custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi Greetings.
    pls check if it helps you.
    http://msdn.microsoft.com/en-us/library/office/jj554504(v=office.15).aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • NEW Design Layout Using Omnipotlet...?

    Hi All,
    Is it possible to build a "Customized Design Layout" using OmniPortlet...?
    How can i achieve this in OracleAS Portal V 10.1.4...?
    Please help me
    Regards,
    Kalyan Chandra

    You can do this using the HTML layout of omniportlet and please have a look at the following link to get more details:-
    http://download-east.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_op_ex.htm#CHDEBHCF
    -- Guneet

  • How to design and use tabstrip in webdynpro

    hi,
         i trying to design tabstrip in webdynpro(SE80), i dont know how to design and use it. if u have screenshot or any other document give me. its pretty useful for my requirment. guide me

    Hi Saravanan,
    In your view, you have to add the UI element TabStrip. You will have an empty tab strip then. Right click on the tab strip, and add a 'Tab'. Continue in this manner to add as many tabs as you want. Each tab will have a header, specify the tab title in that.
    Now go to each tab, right click and insert element. You could insert any element like a table, Input fields etc. Event handling has to be done separately for these elements. At the tabstrip level, you need to handle only the onTabSelect event. This is the event triggered when you change tab selection in the tabstirp. In the properties of the tab strip, there will be a field selectedTab. Specify the ID of the tab which you want as selected. This will be your initial selection.
    You can also enable and disable tabs, say grey out tabs that have no data etc. All this can be done by context attribute binding.
    You can also refer to the view  by name TABSTRIP in the component WDR_TEST_EVENTS.
    Regards,
    Uday

  • Creating 9i Designer Repository using SCM in 10g Database

    Hi, Can I create a 9i Designer repository (using SCM) in a 10g database ?
    Thanks,
    Purav

    Hi,
    You can find the documentation at the following location:
    http://www.oracle.com/technology/products/designer/supporting_doc/des10g_9045/cmnhlp72/rep_insgde/igttl_9i.htm
    Thanks.

  • Can Expression Design be used to create whole website pages???

    I have been looking at Design and dont know how to use it, and the help is of no help. Can Design be used to build whole web pages???
    Thanks, in advance!

    No.
    Expression Design is a vector art graphics design program.
    Expression Web is a professional-level web site design tool.
    A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

  • Any idea if the 2012 MacBook Pro 13" will be ok to learn design on using CS6 design standard?

    Hi,
    First time MacBook buyer.
    Looking at the 2012 13" model with 2.5Gzh I5 chip and 4GB RAM, any one know if this will work ok for designing on using the latest Adobe CS6 design standard suite?
    ALso can the 13" be connected to a standard DVI monitor using an adapter for the thunderbolt port?
    Thanks,
    Dan.

    I suspect it would but the question is how well.  High end Adobe software is more often used in powerful machines with superior GPU capabilities.  All notebooks are inferior machines compared to desk tops and you are looking at the least capable Mac in that regard.  I suggest that you post your query in the Adobe User forum and get responses from those who are familiar with the software and understand it requirements.
    As to your other question, adapters are available.  See the attached.
    http://eshop.macsales.com/item/NewerTech/CBLMDPDVI/
    Ciao.

  • How to create tshirt design tool using flex

    hi all,
    i want to create a tshirt design tool using flex,user can customize using this tool to create his tshirts and designs,
    how to get the layouts and requiremnts in flex?
    if any useful suggesion please share guys,
    cheers,
    B.venkatesan.

    Shanila,
    I cannot open the document reference you provided. However, in my view, a workflow design document is no difefrent than any other technical design documen (TDD)t. It may have few different sections to enumerate the process and actual steps.
    I have always used a standard TDD, per my client templates, and then added the sections needed to list the workflow specific items.
    Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

  • Does the designer not use on 9i?

    At the past,i use the designer 6i rel4 on the 8.1.7 a long
    time,while i upgrade the database to 9i,i can not use designer.
    I have installed 9i client on the client.All of the process
    seems Ok.But when i execute the designer,after enter the
    Login,the designer will be closed immediately.
    Does the designer not use on 9i?
    Thanks.

    I've been facing the same problem. We installed Oracle Designer
    6i R4 (Repository version=6.5.52.2) on Oracle 9i
    While creating the repository, some of Designer views failed
    (CI_ROOT_APPLICATION_SYSTEMS, CI_CONTAINER_ELEMENTS,...)
    Both views, have CONSTRAINTS name as one of their columns.
    Oracle 9i, does not accept that name in creating the view. We
    renamed the column to CONSTRAINTS1 to let the process go on.
    Afterwards, designer is not connecting properly, compaining
    that "CDR-20043 - Non-versioned repository has no workarea or
    insufficient privileges"
    Does Oracle Designer 6i R4 works on Oracle 9i ?????
    Please help!

  • Calendars: Can I design one using photoshop?

    I would like to try and design a picture calendar for a dog breed group I belong to. I am not a professional, but I'd like to learn how to design a calendar for fun. I have Photoshop 6, which I play around with a lot. Can I use this to design the calendar? or is there another software which you all feel would be better suited? (I have an old version of pagemaker, but I'm not as familiar with it. I also have MS Publisher, but I thought photoshop would create a nicer looking calendar end result?). I'd like to get the calendars printed on glossy paper, etc etc.
    Btw, can In Design be used to create a calendar, or is photoshop better (I don't have ID, but I'd like an excuse to buy it. lol)
    Thanks,
    P

    Thanks for your replies. I checked those links out for the online software, but that's not quite what I wanted. I will check the indesignsecrets link now. :)
    QUESTION:
    I found this site.
    http://www.candidphotostore.com/20phcate3.html
    THIS is the exact style photo calendar template I want and the right size (12x24), plus it seems I can use it with my Photoshop (I hope? I have Photoshop 6), but...I've never heard of this company, and the contact info is strange (a bogus tel no 555-555-1212 ??? hidden in the About Us menu).
    Anyone ever purchase this site's photoshop calendar template? It's the layout and size I reeeeeeeeeeeallllly want. lol
    Thanks!
    P

  • Database Design for use with XSQL-connected Clients

    Hi all,
    this might seem a little off-topic at first, but I suppose we are not the only ones reading this group designing an architechture using XSQL servlet as the only connection to the database, with clients connecting over the internet.
    So far our approach works well, but of course any database round trip is much more expensive in this environment than with clients that hold an open connection to the database.
    That led us to the idea of generating primary keys on the client instead of the database (e.g. with CoCreateGuid on Win32). Do those GUIDs have to be stored in the Oracle database in a RAW column or does a NUMBER field do the job?
    I found a hint in the Oracle 8i Replication manual to use SYS_GUID values in a RAW(32) column as a primary key to avoid conflicts between sequences on multiple machines. But I didn't find any statement concerning the performance issues of this.
    Our database will not store huge amounts of data (most tables < 100.000 rows, just a handful more than a million in huge environments, which will be able to afford huge machines...), so this should not be
    a problem, I guess.
    Does anyone of you have experience with this?
    And another question: Can I safely assume that keys generated with SYS_GUID on the Oracle server will not likely be the same as those that are generated using CoCreateGuid on the Win32 client?
    Thanks for your input.
    Olaf Lewitz
    ohltec SOFTWERFT, Hamburg

    Don't GUID's have hyphens in them? If so, you'd have to use a VARCHAR2(xx) of appropriate length. If not, then you can likely use HEX_TO_RAW() and RAW_TO_HEX() to store then in a RAW as you've noted.
    Note that the XSQL Servlet's default connection manager does to connection pooling, so the roundtrip to the database may not be as expensive as you're thinking. :-)

  • Error while saving a workflow via sharepoint designer Office 365: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities

    Hi,
    I get the above error whenever I try to save a new WorkFlow. I have cleared the caches
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>, and
    I still get the same issue.
    We are using SharePoint Designer 2013 (15.0.4569.1503) and connecting to SharePoint 2013 on Office 365.
    Can you please provide more insight?
    Thanks.

    Hi Rake,
    You can compare your PC and another machine which is working, see if it is related to IE settings(e.g. SharePoint urls in trusted sites zone).
    And you can try re-install the SharePoint Designer 2013 with same version and bit-version(32/64) on your PC like another machine, then check again.
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Trouble creating a Netezza datasource from SharePoint Designer 2010 using OLEDB

    I am trying to create a data source in SharePoint Designer 2010 for connecting to a Netezza database via OLEDB.  If I choose the Microsoft .NET Data Provider for OLEDB and give it the server name, username, and password, I get the following connection
    error:
    Server Error: An error occurred while retrieving the list of Databases from nzprod-vip: The data retrieval service encounterd an error during connection to the data source. Contact the server administrator for more information.
    (The server administrator had no additional information.)
     If I use a custom connection string, specifying the Netezza OLEDB provider,  whose format looks like this (actual database and credentials omitted):
    Provider=NZOLEDB;Password=...;User ID=...;
    Data Source=...;Initial Catalog=...;
    Persist Security Info=True;Port=5480;Logging Level=0;Log Path=nzconnect.log; Optimize for ASCII=True;
    I get the following connection error:
    Server Error: An error occurred while retrieving the list of Databases from nzprod-vip: The Web server cannot connect to the specified data source because the query may contain errors, the data source may be unavailable or configured improperly, or you Web
    site is behind a proxy server or firewall.
    If your Web site is behind a proxy server or firewall, verify that your server administrator has configured the Data Retrieval Services HTTP proxy server setting for Microsoft SharePoint Foundation.
    (We are not behind a proxy server or firewall.)
    The NZOLEDB provider is loaded on the SharePoint server running the SharePoint Data Retrieval Service. I can successfully connect to the Netezza database if I login directly to the SharePoint server and run a Netezza database
    browser that connects via NZOLEDB using the same parameters that are in custom connection string I tried through SharePoint Designer.
    Our SharePoint server configuration has one server for the application services (including the Data Retrieval Service) and two other servers running just SharePoint web services.   (We actually loaded the NZOLEDB driver on all three servers for
    good measure, though we think the server running the Data Retrieval Service would be right one.)
    We do not think SharePoint privileges are a factor, since we had our SharePoint administrator try to connect while running with full access privileges.
    Any help will be much appreciated.

    Hi Ronald,
    i am not quite sure how the OLEDB connect to the netezza, as i heard they also have their own OLEDB, as you mentioned.
    but please have a check this link, perhaps it may help to set up OLEDB in sharepoint designer
    http://office.microsoft.com/en-us/sharepoint-designer-help/add-a-database-as-a-data-source-HA010355745.aspx
    perhaps this link may help you in some way:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/0e4b5e49-49ef-4e6b-9ab8-ac954ab8d0be/how-do-i-add-c-to-webpage-in-sharepoint-designer?forum=sharepointcustomizationlegacy
    http://social.technet.microsoft.com/Forums/en-US/9ac4a7af-6e3f-41d8-8b8e-14b707697e06/c-code-to-connect-netezza-using-oledb-provider?forum=sqlintegrationservices
    http://www.rafael-salas.com/2010/06/ssis-and-netezza-loading-data-using-ole.html#!/2010/06/ssis-and-netezza-loading-data-using-ole.html
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for