Deskjet 6980 getting it to recognize new network from network when originally set up

I set a deskjet 6980 printer up 2 years ago on my home wireless network and it has worked great. I replaced my airport base station several weeks ago with an Apple time Machine and reconfigured the network and renamed it. Everything works great ( computers, tivos, etc.) except the printer will not work. It has a flashing light on the front next to the blue wireless light. Printer still works fine when I plug it into my computer but I cannot figure out how to change the printer setting so as to connect it wirelessly to our new home network. any ideas? the HP online support group has been no help.

Since you have replaced your network with new hardware, new SSID and perhaps other changes you will have to re-install the printer onto the network. You can use the method outlined on page 8 of this document: http://h10032.www1.hp.com/ctg/Manual/c00591746.pdf (probably the most straightforward with a Time Capsule setup) or try the other methods outlined in the document.
Try that and let me know how it goes!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

I'm a meeting organizer and I'm using office 365Outlook. When an attendee invited to a meeting tentatively accept proposing a new time for the meeting, I get a message with "New Time Proposed" and, when I open it, the "Accept" or declined or propose new t

I'm a meeting organizer and I'm using office 365Outlook. When an attendee invited to a meeting tentatively accept proposing a new time for the meeting, I get a message with "New Time Proposed" and, when I open it, the "Accept" or declined
or propose new time button is grayed out so that I cannot accept the new time. When this occurs, I must create a new meeting request with the new time that has been proposed.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

How to Create a new column from two different result sets

How to Create a new column from two different result sets, both the result set uses the different date dimensions.

i got solutions for this is apply filters in column formula it self, based on the requirement.

Just brought a new iPod touch and when I set it up (twice now, after resenting to factory settings) there are grey squares on all screens at the top and the apps over these squares won't open. Any suggestions?

Just brought a new iPod touch and when I set it up (twice now, after resenting to factory settings) there are grey squares on all screens at the top and the apps over these squares won't open. Any suggestions?

I can't envision what yo are seeing.
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Why do v need 2 generate new smartform from scratch when v have a standard

hi experts
why do v need 2 generate new smartform from scratch when v have so many standard smartforms can any one explain in detail the scenario where v have 2 do that
thanks
bhanu

Hello Bhanu,
Standard smartforms are for standard SAP applications.
Every client will customise standard SAP to suit their own requirements. So if there is a requirement specific to the cleint, they can ask us to develop a custom Smartform.
Award points if found useful.
Regards
Indrajit.

Can't get DW to recognize new file extensions

I'm trying to get DW to recognize the following file
extensions as HTML: .pt, .zpt, and no extension.
I tried to follow the instructions in the article "Changing
and adding file extensions recognized by Dreamweaver MX": I entered
the two extensions in all caps in the :All documents and :HTML
documents lists in Extensions.txt. And (just as a guess) I tried
entering two successive commas, hoping they would be interpreted as
"no extension".
None of these tricks has enabled me to open any of the files
from the "Files" list in DW. I just get "Can't find a valid editor
for this file extension."

Thanks, Alan. I was indeed editing the wrong Extensions.txt.
Editing the one under "\Documents and Settings" rather than the one
under "\Program Files" did the trick (I'm running Windows XP).
Hope springs eternal, so let me pursue the question about
extensionless files one step more. I'm trying to use DW as the
editor for developing a Plone site. Plone's basic HTML files are
extensionless, and I fear it would screw up the links within Plone
if I added extensions to these file names. However: Within Plone, I
can designate DW as my external editor, and then (by clicking on an
icon in the Zope Management Interface that underlies Plone) open
the extensionless Plone files in DW (tho only in code view). How
come DW will open a file that was tossed over from Plone, but it
won't open the same file from its own "Files" list?

How to Get iTunes to Recognize New Nano?

Hi,
Let me re-phrase an earlier question that got no response (sob):
I have been using a mini for years, but the battery is nearly dead, so my husband gave me his brand new video Nano. When I connect it to my computer, iTunes doesn't recognize it. Any tips would be deeply appreciated.
Thanks,
Terry
<Edited by Moderator>

Hi,
Thanks for your response.
I finally got it figured out and maybe the answer will help others in my situation.
I was using the same cord from my old iPod to connect the new Nano to the computer. The computer didn't recogniez the new Nano until I switched out to the Nano cord. Duh.
Terry
<Edited by Moderator>

How do I get Flash to recognize my TextInput from class?

Hi -
I'm trying to write a class for a standard input form. I've
got a movieclip in the library and have linked it to this class.
(class included below.)
This movieclip contains several text inputs which I have
declared in my class file. I can get their ._x and ._y values, but
I can't assign to the .text value of the TextInput. Nor can I read
this value when I set it in the parameters tab in flash. It just
comes up as undefined.
It's as though flash does not recognize the instance that was
placed on the stage in the authoring environement as a TextInput. I
can trace out the instance, but Flash does not treat it as a
TextInput because I can not assign a string to the .text property.
If I instantiate the TextInput in my class file and then
position it on the stage - I can assign to it. But this is not as
practical because I can not lay things out visually in Flash. How
do I get Flash to recognize my TextInput instance on the stage from
a class file?
Thanks in advance!
import mx.controls.TextInput;
import mini.slide.*;
class mini.slide.InfoCollect extends Slide{
var first:TextInput;
var testInput:TextInput;
var last:TextInput;
var email:TextInput;
var address:TextInput;
var city:TextInput;
var zip:TextInput;
var phone:TextInput;
function InfoCollect(){
trace("InfoCollect created");
this.first = new TextInput();
this.first.text = "testing";
trace("this.first = " + this.first.text);
}

Since you are putting the assignment and trace statements in
the Constructor function, it is possible that the textInput boxes
have not all yet loaded. So, when you are trying to assign values
to them, they are not present on the stage.
Put your code in an onLoad function. That way you can insure
that all components have loaded before you assign values to them.
The onLoad function will be called when the "onLoad" event is
triggered after all of your movieclip has loaded.
function onLoad() {
---your code here---
}

ITunes DID recognize new iPad mini, error when updating, now doesn't. Please help. I have a 700 dollar paperweight now.

Today I bought a brand new iPad mini 2, 32 gb. First, I backed up my old ipad mini to my hard drive. Then, I updated iTunes to the newest version. Then, I plugged in the new iPad mini, went through the set up, iTunes was working fine. I registered the iPad, then it suggested i update the iOS on the iPad. This is where things went south. After a few minutes, it stated "cannot update iOS 7 at this time" or something to that effect. Since that point, iTunes will not recognize the iPad. The iPad shows the "connect to iTunes" screen. When I plug it in, I hear the tone suggesting a new device is connected, but nothing happens. I've tried it in DFU mode, no results. I've tried putting it in recovery mode, nothing happens, just the same screen. I've uninstalled iTunes and reinstalled it, following every step suggested through this site/apple support. I even uninstalled and installed an older version of iTunes (10.7) but same result. I've followed all troubleshooting steps, and nothing is working, so please don't suggest the same olf "iOS: Device not recognized in iTunes for Windows" page.
What should I do? Do I have to take this to the geniuses at the store? Will they even be able to help without having access to my computer?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

How do i get a list of SQL Servers from network?

Hi everyone,
I'm trying to get a list of SQL Servers from the network and put them into a drop-down combo box. I try to search on Google and i can only find some C# source codes which doesn't help me at all. I'm wondering if JAVA has the similar method to do so.
btw, I'm using MSSQL Server 2005, JDBC 1.2, JDK 1.6.0_24
thanks

jschell wrote:
flyto9 wrote:
I'd been told to create a user friendly no brainer user interface In typical business scenarios involving databases that is ridiculous.
A company that has multiple database servers must ALREADY understand the complexities of managing and using those databases.
true, but you know as well as I do that requirements documents are usually not written by people with the least understanding on those complexities...
And if a company assigns such a project to someone like OP who clearly doesn't know how to deal with such requirements documents, that only shows their morosity all the more clearly :)
Assuming that I'm able to find a list of TCP connections on network, how do I know which of them are sqlserver?That isn't what I said. A "protocol" is a description of a methodology involving functionality and communication which solves a particular problem.
There is a "protocol" which describes how to find MS SQL Servers. You don't make it up yourself. You find the description, read what it says and implement it.Or more likely (like Oracle) there's no such security problem in MS SQL Server and instead it relies on the client knowing the connection details or it'll never find them.

Why will iPhoto 5.0.4 suddenly not recognize new photos from my camera?

I just installed a new hard-drive in my PowerBook G4. My old harddrive was cloned and transferred to the new one.
Most things work as they should, but found problem when I connected my camera to the Mac. iPhoto (5.0.4) automatically launches and starts the process to collect the new pictures from the camera. Everything just as it ussed to. The window asking wether to import duplicates appear although the two picture-frames are empty. I click for not importing duplicates and the process goes on. When finished a window opens telling that 49 files (all the new ones) are of an unknown file-type or do not contain any information!
What do I need to do to make my Mac and the camera and iPhoto to correspond as they used to?

It was so embarrassing simple that I almost dare not tell! For once I had connected the camera to the USB-port on the right side (which obviously does not have the same performance as the one to the left).
So when I changed port it all worked fine again!

Getting CS3 to recognize new file types

I'm trying to get Dreamweaver CS3 to recognize, and use the
proper HTML editor on pages with a *.master extension. This is an
ASP.NET 2.0 master page file, and they generally contain a ton of
HTML.
I can't believe that this wasn't set up by default ;)

http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Jasconius" <[email protected]> wrote in
message
news:f1t612$n57$[email protected]..
> I'm trying to get Dreamweaver CS3 to recognize, and use
the proper HTML
> editor
> on pages with a *.master extension. This is an ASP.NET
2.0 master page
> file,
> and they generally contain a ton of HTML.
>
> I can't believe that this wasn't set up by default ;)
>

Cannot get Ex495 to recognize new 2 TB hard drive

I just purchased a new 2 TB Hitachi hard drive, but the home server won't recognize it. I tried to put it in the 3rd and 4th bay, but it just wouldn't work. I did put the drive in a desktop and it works fine, so it's not a hard drive hardware issue itself. Is it a known issue with 2 tb drive with the server?

angie8sfast wrote:
I am sure it's a formatting problem. I've never done this with a MAC. Had to do fixes and such all the time with the Dells!!! So, my iMAC HD died. I was able to retrieve all the files, music, pict, etc.
Installed 2TB SATA HD. Obviously, I assumed some things. Now I have only 1 GB DDR2 SDRAM What do I have to do to utilize more memory? I can't even update and use iPhoto.
Running Snow Leopard 10.6.8. Cannot get back to 10.8.2 because of memory issue.
How much Ram was shown before you installed the drive?

How do I get iTunes to recognize my external, wireless-networked hard drive (Western Digital) during installation and set-up of iTunes?

Hello,
I'm re-installing iTunes for Windows 7 (64-bit) due to a bug that occured with the iOS7 update. The Genius Bar recommended that I uninstall and re-install iTunes from scratch. All of my music is located on a WD external hard drive that's connected wirelessly to my PC. I didn't have this problem until the iOS update for iphone 5, v.7.0.
Any help is greatly appreciated.
Thanks!

I didn't relate this; now iTunes will not install on my PC when pointed to my external, wireless-networked hard drive. It appears that it doesn't recognize it.

Can't get Apache to recognize new certificate

In trying to replace an expiring certificate, I thought I followed instructions properly -
1) entered the information for a new cert in S.A.
2) clicked "request signed certificate from CA"
3) emailed the resulting csr to our IT manager, who returned the cert from Equifax
4) clicked "Add signed certificate"
5) pasted in the cert and clicked save.
Everything appeared to work; the new information shows correctly in the certificate pane of S.A., including the signing authority and the new effective dates (beginning yesterday). Keychain access and certificate assistant apps both show a valid cert, issued by Equifax for the server.
When I try to log in to an SSL web page, however, I get the "Web site certified by an unknown authority" message. Examining the cert in the browser shows it to be self signed, with a serial number of 12:34:56:78. I've tried restarting Apache, rebooting the server, re-specifying the cert to use in the web site configuration, all to no avail.
What else? Delete the site listing in S.A. and recreate it?
G4 Mac OS X Server (10.4.7)
G5, G4, MacBook Mac OS X (10.4.7)

Delete the site listing in S.A. and
recreate it?
Never mind. This did the trick.
G5, G4, MacBook Mac OS X (10.4.7)

Deskjet 6980 getting it to recognize new network from network when originally set up

Similar Messages

Maybe you are looking for