[Desktop] Forced offers (Advertisements) are not appropriate nor acceptable for paid Spotify users.

As a paid Spotify subscriber, I reject as obviously and wholely inappropriate any advertising on your service that does not come with an appropriate level of compensation.  You need to do one of the following:1. Remove them completely2. Make some easy facility to have them permanently hidden.3. Compensate the user for forcing them to view your advertisements, in the form of free service.  There is no appropriate scenario where the paid spotify user is forced or coerced to view your advertisements without prior consent and appropriate compensation.

Updated: 2015-08-04Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Desktop-Subscription-Let-premium-scubscribers-suppress-offers/idi-p/1176172
Add your kudos and comments there please! ;)

Similar Messages

  • Change number that are not created earlier accepted for change of BOM

    Hi,
    When i am going to change BOM it gives warning message "Enter change number, BOM has history requirement"
    But my problem is when i put any number in field of change number it is allowing me to change the BOM.
    It should not be accept any number that are not created earlier in the system. It must have to accept change number that is created for the history requirement for perticular material. kindly give your input on this issue.
    Atul

    Hi Atul,
    Please refer the thread ECM-Problem with Change number in CS01 and CS02 Transactions
    Thanks,
    Rakesh J

  • I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

    I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

    If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
    But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

  • SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

    I have a simple column chart grouping on 1 value on the category axis.  For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis.  I right click on the data series and choose "Add calculated series...".  I choose moving average.  I want to move the average over at least 2 periods.
    When I run the report, I get the error "Formula error - there are not enough data points for the period".  The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5).  When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
    I don't think this is entirely acceptable for our end users.  At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart.  Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
    Thank you,
    Dan

    I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
    If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
    <ChartFormulaParameter Name="Period">
                      <Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
    </ChartFormulaParameter>
    What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
    A side note:
    If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

  • As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars

    As of yesterday, calendar subscribers are no longer getting event alerts. We are not exceeding the limits for number of calendars, and have not installed new hardware or software. What else could be causing this, and how do I fix it? This is critical!

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Are not the right ones for the icloud account. How can I find out what these are?

    I have downloaded icloud onto my PC. When I try to access my account I am told that although my Apple ID and password are correct they are not the right ones for the icloud account.How can I find out what these are?

    Christine Helen wrote:
    I can't find any way of creating an icloud ID. I only have a PC. no Mac product except an iPod classic.
    Oh, then you can't unless you know someone with a Mac you could use for a moment or 2. (Like at the Apple Store)

  • TS3219 my ipad2 when connected to my laptop is not responding nor accepting the connection

    my ipad2 when connected to my laptop is not responding nor accepting the connection. My ipad was blocked to  return  to main menu while trying to updating  its IOS. How can we return to main menu?

    Take it to Apple

  • The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

    When I try to install Connection Broker on a Windows 2012 R2 Server in a Windows 2003 domain I get this error:
    The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
    Pooled virtual desktop collection name: NULL
    Error: Logon to the database failed.
    I have added both the Connection Broker server and the 2 remote desktop servers (also Windows 2012 R2 Servers) to the "Windows Authorization Access Group" in the domain according to this: http://support.microsoft.com/kb/331951
    But it still does not work :-(
    I keep getting same error....
    Any idea what I might be missing ?

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly please let us know by which method you have setup RDS role. You can have more advantage and feature when you will install with Standard deployment instead of Quick start deployment. So if you have setup with quick start option then you can try installing
    with standard type and check the result.
    In addition, please check SQL server database is properly configured for RDS server. Also check that domain controller properly communicates. Kindly go through below thread for more information.
    Server 2012 RDS - Remote
    Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Apps are not updating,keeps asking for Apple ID,can anyone help?

    Apps are not updating,keeps asking for Apple ID and then goes back to saying update?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IProcurement is not a valid responsibility for the current user. Please contact your System Administrator.

    Hi All,
    When I am trying to click on the 'iprocurement Home page' menu in the iprocurement responsibility getting the below error message in R12;
    "iProcurement is not a valid responsibility for the current user. Please contact your System Administrator."
    Can any one let me know how to resolve this?
    Regards
    Joseph

    Hi Joseph,
    I am assuming that the user actually has the iProcurement responsibility assigned to them. If so, try the following solution from note 1560400.1:
    1) Logon with System Administrator responsibility
    2) Navigate to Profile > System, click on User and enter the user name
    3) Search for profile 'Applications Start Page'. Delete the value set at user level and save
    4) Retry
    Regards,
    Cheryl

  • I have downloade F.8 and when I click on the desktop icon,Iget , you are not on the latest version of Firefox

    I down loaded F.8. When I click on the desktop icon, what appears on my monitor in small print is, You are not on the latest Firefox browser. Please advise.
    James Devlin

    Your home page is likely google.com/firefox which is no longer maintaned. Please change your homepage to something else, like about:home. https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page

  • Values in Decimals are not able to view for an upload in SAP R/3

    Hi,
    We have come across a weird issue with regards to decimals.
    Actually the problem is we have one user who is trying to upload a CSV file and then executing it, after that it suppose to display the values i.e. if a value has to display as 1,23,456.78 but it's showing as 1,23,456.00.That is it evading the values in decimals.
    Incidentally this issue is only when we upload with that particular user id and when we do it same file with other id it's working fine. Besides, itu2019s not displaying the values after decimals only for a specific upload .As we have checked the user default settings i.e decimal notation, excel settings and regional settings on the user's desktop as all the settings are in sync.
    Even the functional team has confirmed that everything is fine from their end as it's working for other user ids.One more thing is this is not working for all the users from a specific country.
    Please advise what could be the root cause.
    Regards,
    Dheeraj

    Hi Alex,
    Thanks for your reply.
    yes,user parameters also same .As fas as my concern i don't think it's an authorization issue
    Is there anything else which we have to check apart from Defaults,parameters,excel settings,regional settings ?
    Regards,
    Dheeraj

  • Price and Pricing conditions are not copied to PO for a line item !!

    Hi
    I have created a PO w.r.t a PR which has only one line item.
    Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
    How do i rectify this error !!
    Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
    MaruthiRam

    What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
    please reply

  • Taxes are not showing in PO for a plant

    Hi,
    We have a Purchase Order with Plant1 and using a Tax Code with CST Condition. In the PO Item Details, the Taxes are displaying when I click the 'Taxes' button in the 'Invoice' Tab. But, when I use the same details (all details, including Tax Code) to create another PO for Plant2 (Plant1 &2 belong to same company code), the Tax Details are not displaying. Clicking on the 'Taxes' button had no effect.
    The Tax Code is maintsained correct and the Conditon record also maintained at Country / Tax Code level (checked in FV13)
    Why the Tax details not showing for Plant 2 ? Please give a solution..
    regards
    Arun.

    If you have assigned the tax code to the company code under SPRO>Logistics general> Tax on goods movement
    It should work for both the plants unless  that plant is not under that company code.
    Are all the tax codes behaving in the same way or its only a particular tax code.
    Regards
    Sangeeta

  • Changes are not reflecting in BI for datasource 0CRM_CONTACT_OUT

    Hi All,
    I have written some code for datasource 0CRM_CONTACT_OUT (Text data source), for some language thing in CMOD where i am just checking wether the language key is english or not if not then i am modifying the Language code to english.
    I have activated the code and checked that in RSA3 as well, where i am getting 3859 records and this is the total number of records as well . There are 2 fields for selection as well 1. is language key and other is changed at. So in RSA3 i have two options for selection as well.
    After all this i replicated the datasource in BI system but two problems i am facing there.
    1. No field is coming in selection screen at infopackage level.
    2. I am getting less records than what i am getting in RSA3.
    I tried every possible thing - replication, deleted the source system assignement and again re-created it. But nothing is working.
    We are on 3.5 version of BI.
    Any help will be apreciated.
    Thanks
    Dipika

    Hi Tyagi,
    Is ur issue is resolved related to the language.
    1.If the fields are not appearing in the Info package selection tab:
    Then u might not have marked the same in the datasource/transfer structure in the transfer rules level.
    2. If the records are becoming less:
    Then u need to take the same records into excel from R/3 datasource & after applying filters u check it.
    Some records might be differing with the values only. In that case, the no. of records will be getting aggregated at the BW side.
    I hope u might have got some idea in regard to this issue.
    Kindly revert.

Maybe you are looking for