Detect duplicates in ITAB
Hi All,
I want to detect all duplicates in itab and then display entries with duplicates. My itab only has one columns. How do I do this?
I do not wish to delete the duplicates. Thanks.
Tyken
Hi
Just execute the following code to display the duplicate records
data: begin of itab occurs 0,
name(10) type c,
address(30) type c,
end of itab.
data: v_rec like itab-name.
itab-name = 'name'.
itab-address = 'address'.
append itab.
itab-name = 'name1'.
itab-address = 'address1'.
append itab.
itab-name = 'name2'.
itab-address = 'address2'.
append itab.
itab-name = 'name3'.
itab-address = 'address3'.
append itab.
itab-name = 'name2'.
itab-address = 'address3'.
append itab.
itab-name = 'name3'.
itab-address = 'address5'.
append itab.
write:/ 'itab contents'.
loop at itab.
write:/ itab-name,itab-address.
endloop.
uline.
skip.
sort itab.
loop at itab.
on change of itab-name.
v_rec = itab-name.
if v_rec <> ' '.
delete itab.
endif.
endon.
endloop.
write:/ 'duplicate contents in itab'.
loop at itab.
write:/ itab-name,itab-address.
endloop.
Regards
Varalakshmi.K
Similar Messages
-
Is there auto detect duplicates to prevent copying in iTunes 11?
This seemed to be a legacy issue. So I'm wondering if the latest iTunes resolved this problem.
It is fine to be able to detect and delete but the point is it shouldn't happen in the first place. So I'm hoping the new iTunes is able to detect the latest and keep only the latest copy. Avoiding duplicates should be built into the system.
Also, it could be smarter when it says 'Delect Exact Duplicates' that it does exactly just that ie list the duplicates copies, not include the original or latest copy. That way you can select all the 'duplicates' and delete at one go.
I hope someone from Apple gets to read this. Thanks.
P/S: btw, 'Detect Exact Duplicates' will only show up AFTER you search for it in Help. Otherwise, only 'Detect Duplicates' shows. I think its a glich.Apple don't read these forums for feedback, that should go to iTunes Feedback.
Not creating duplicates in the first place is mainly a matter of organized workflow. If, before you rip one of your CDs, you check to see if you already have the album, then you can avoid creating duplicates. In fact iTunes will generally notice if you try to import the same CD twice. If, however, you import files ripped with another package into your library, and then decide to rip the CD with iTunes it probably won't make the connection.
I've written recently in this post on why you might end up with duplicates and how you might remove them manually, though you probably already know. I've also written a Windows script to automate the removal of two classes of duplicates. As a Mac user you could take advantage of the efforts made by Doug Adams who has scripts for most organizing iTunes needs and some software for duplicates in particular.
tt2 -
How to detect duplicate for custom object 1
Hi expert,
are there any fields in custom object can detect duplicates If These Fields Match?
we thought it should be "Name" but it's not.
Thanks, sab.Sab, field validation is not going to check for uniqueness of the custom object name. However, you could use field validation to add a value to the custom object name which could make it unique (such as name + rowID or name + created timestamp).
-
SAP BPC 7.5 SP 7 - Master Data Load Detected duplicate member ID
Hi Gurus I have a requirement.
I am loading the Master data for Cost Center - initially while loading master data i didnot load hierarchy. Now I started to load the Master data with Hierarchy but when ever I tried vailidate the transformation file then it is throwing the "Detected Duplicate member "
Let me show you the transformation - what I wrote there
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
*MAPPING
ID=ID
*CONVERSION
ID=Master_Data_Conversion.xls
Conversion Master_Data_Conversion.xls has the following code this is to remove the spaces EXTERNALINTERNAL
*js:%external%.toString().replace(/\s+/g,"")
Let me show you how I have selected the Data type - Master Data /text from NW BW Infoobject
Selection of infoobject - 0costcenter
Format - External Format
Set Selection - first Tab - Attribute I only wante the Control Area which is 1000 so - Control Area = 1000
2nd Tab - Hierarchy - Import Text node - yes Hierarchy node - xxxxxxx Version - Empty Member ID - first member Level - Blank
3rd Tab Language - English
4th Tab Attribute list - Controling Area only is selected
Note: Let me tell you that when I am loading the Master data with out Hierarchy inthe Set Selection the loading is succesful but when I am doing it with the Hierarchy as mentioned in the 2nd Tab I am getting the error as following.
Master data (dealt by table level) has errors
Detected duplicate member ID '201100'
Also, the Master data for Cost Center in the BW is a time dependent so it is having Valid to and Valid from fields which is not there to be delt in the BPC.
Please Help@Vinay let me tell you when the BW is having the master data which is time dependent then it will have this Duplicate member as we will have duplicate cost center names which are compounded with the Time, so BW will not show an error as there is compounding but BPC do not have that feature.
The was raised with SAP and they resolved this issue.
SAP Note 1641529 - Loading Master Data gets duplicate error in special case
When running Data Manager Package 'Loading Master Data from BW
InfoObjects', 'Duplicate Members are found' error may be reported in below
case:
o In the source BW InfoObjects, there are master data that have
different lengths, and their IDs are all numeric characters. And
o If the members are sorted by their lengths first and then IDs gets
a different order compared with the one if they are sorted directly
by their IDs. Take member '122' and '1101' for instance. In BW,
they are sorted as [122, 1102]; if they are sorted directly by the
IDs, the order is [1102, 122]. And
o when running the package, the members are in both 'Attribute' and
'Hierarchy' selection, and the option Filter members by Attributes
or Hierarchies is used. And
o Select 'External Format' when running the package.
Other terms
DM, Loading Master Data from BW, Duplicate Members
Reason and Prerequisites
It's a program error.
Solution
Please apply this note or upgrade to SP11.
I hope this will help you else let me know the entire requirements so that I can provide some kind of assistance.
Do check how the master data in ur BW is then how the hierarchy nodes and costcenter nodes are there?
Good Luck
Vijay Sumith -
We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
generally due to the remote host disabling session cookies.
Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
Have read most of the docs about this error -all to do with LCDS
Notes:
Not using LCDS,
No Remote Calls from loaded Sub-Apps,
No Errors from the Flex Web App which is pretty much identical and calls the same cfcs.
The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
Could it be a two first time remote calls hitting the server together before a session is set up?
Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
Please advise thank you.For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
NLB detected duplicate cluster subnets - Exchange Server 2010 SP3 CU5
Hi All,
I will explain the environment first, there are:
-Two HUB/CAS servers (WNLB)
--HUBCAS01
--HUBCAS02
-Two Mailbox servers (Failover Clustering)
--MAILBOX01
--MAILBOX02
*All servers are updated to Exchange Server 2010 SP3 CU5.
The issue is that from recently outlook users are disconnecting from the outlook and cannot be joined to the exchange server unless if I drainstop or stop HUBCAS01. Furthermore, if I start HUBCAS01 from WNLB it will work fine for sometimes yet it will randomly
disconnects outlook users from exchange again (For ex: next day morning).
So far when I search deeper in Event log, there is an warning event log:
Event ID 18: NLB cluster [192.168.*.*]: NLB detected duplicate cluster subnets. This may be due to network partitioning, which prevents NLB heartbeats of one or more hosts from reaching the other cluster hosts. Although NLB operations have resumed properly,
please investigate the cause of the network partitioning.
Now I hope you will provide this link to resolve this issue - http://technet.microsoft.com/en-us/library/cc726421(v=ws.10).aspx
But I don't think that this will resolve this issue, as i have tried this for 3 times, yet no luck. Please help me to resolve this issue permanently. Thanks in advance.Hi,
The issue is mainly related to the HUBCAS01 server. To deep investigate the issue, you need to take RPCTrace from the Outlook client and see the details. Even more, it’s better
to take a Network trace to check the details of the network.
Thanks,
Simon Wu
TechNet Community Support -
DELETE ADJACENT DUPLICATES FROM itab
Hi Frends, can any one explain me about
<b>DELETE ADJACENT DUPLICATES FROM itab</b>
and can any one give me sample program using the above statement.
full points will be given for good example
Thanks and Regards
Vijayai am sending 2 programs to u:
DESCRIPTION: INTERACTIVE REPORT FOR SALES DOCUMENT
*FOR PRINTING SALES DOCUMENT HEADER, SALES DOCUMENT DETAILS, PARTNER
DETAILS, SCHEDULE LINE DATA.
D A T A D E C L A R A T I O N S *
INCLUDE z8vg_isro1.
INITIALIZATION.
v_chkbox = ' '.
v_chkbox1 = ''.
S T A R T O F S E L E C T I O N *
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-028.
SELECT-OPTIONS: s_vbeln FOR i_vbak-vbeln.
"FOR RANGE OF VALUES.
SELECTION-SCREEN END OF BLOCK bl1.
A T S E L E C T I O N S C R E E N ( V A L I D A T I O N S ) *
AT SELECTION-SCREEN.
Check if record exists or not.
PERFORM zf_validations.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
*this is event blocks which is executed when the user chooses the
*corresponding function key
REFRESH i_ucomm.
CLEAR i_ucomm.
i_ucomm-ucomm = 'G002'. " schdl data
APPEND i_ucomm.
SET PF-STATUS 'MENU2' EXCLUDING i_ucomm.
" MENU BAR STATUS.
*populating sales order header data , item data , partner data ,
*schedule data
PERFORM zf_select_headerdata.
AT USER-COMMAND.
"This event is executed whenever the user presses a menu option 'execute
"' in the list
CASE sy-ucomm.
WHEN 'EX01'. "Cancel
LEAVE PROGRAM.
WHEN 'GO01'. "for item data
vflag = '0'.
REFRESH i_ucomm.
CLEAR i_ucomm.
i_ucomm-ucomm = 'GO01'. " item data
APPEND i_ucomm.
SET PF-STATUS 'MENU2' EXCLUDING i_ucomm .
PERFORM zf_select_details.
WHEN 'G002'. "for schedule data .
REFRESH i_ucomm.
CLEAR i_ucomm.
i_ucomm-ucomm = 'G000'.
APPEND i_ucomm.
APPEND 'GO01' TO i_ucomm.
APPEND 'G002' TO i_ucomm.
SET PF-STATUS 'MENU2' EXCLUDING i_ucomm .
PERFORM zf_scheduledata .
WHEN 'G000'.
"function code for displaying partner details.
REFRESH i_ucomm.
CLEAR i_ucomm.
i_ucomm-ucomm = 'G000'.
APPEND i_ucomm.
APPEND 'GO01' TO i_ucomm.
APPEND 'G002' TO i_ucomm.
SET PF-STATUS 'MENU2' EXCLUDING i_ucomm .
IF vflag = '1'.
PERFORM zf_partnerdetails.
" FOR PARTNER DETAILS OF HEADER
ELSE.
PERFORM zf_partnerdetails1.
" FOR PARTNER DETAILS OF SALES ORDER ITEMS .
ENDIF.
WHEN 'BACK'.
LEAVE PROGRAM.
ENDCASE.
*& FORM TOP_OF_PAGE
TOP-OF-PAGE DURING LINE-SELECTION.
printing header for secondary list of report.
PERFORM zf_tols.
TOP-OF-PAGE.
printing hearder for basic list of report
PERFORM zf_top.
*& Form VALIDATIONS
subroutine to check whether record exists or not
--> p1 text
<-- p2 text
FORM zf_validations .
SELECT SINGLE vbeln FROM vbak
INTO i_vbak-vbeln
WHERE vbeln IN s_vbeln.
EXIT.
CHECK IF THE RECORD EXISTS OR NOT.
IF sy-subrc <> 0.
MESSAGE e001.
ENDIF.
ENDFORM. " VALIDATIONS
*& Form SELECT_HEADERDATA
subroutine for populating header data and other details.
--> p1 text
<-- p2 text
FORM zf_select_headerdata .
*refreshing all the internal tables.
CLEAR i_vbak.
REFRESH i_vbak.
CLEAR i_vbap.
REFRESH i_vbap.
CLEAR i_vbpa.
REFRESH i_vbpa.
CLEAR i_vbep.
REFRESH i_vbep.
*populating sales order header data , item data , partner data ,
*schedule data
SELECT vbeln
erdat
vkorg
FROM vbak
INTO TABLE i_vbak
WHERE vbeln IN s_vbeln.
IF NOT i_vbak[] IS INITIAL.
SELECT vbeln
posnr
matnr FROM vbap
INTO TABLE i_vbap
FOR ALL ENTRIES IN i_vbak
WHERE vbeln = i_vbak-vbeln.
ENDIF.
IF sy-subrc <> 0.
MESSAGE e004.
ENDIF.
SORT i_vbap BY vbeln posnr.
" SORTING TABLE WITH KEY FIELDS .
REFRESH i_mat.
CLEAR i_mat.
fetching of unique material numbers corresponding sales orderno.
LOOP AT i_vbap.
i_mat-matnr = i_vbap-matnr.
APPEND i_mat.
ENDLOOP.
SORT i_mat BY matnr. " sorting of material nos.
IF sy-SUBRC = 0.
deleting duplicate entries from table
DELETE ADJACENT DUPLICATES FROM i_mat
COMPARING matnr.
*endif.
REFRESH i_mat1.
CLEAR i_mat1.
populating material no and dscription .
SELECT matnr
maktx FROM makt
INTO TABLE i_mat1
FOR ALL ENTRIES IN i_mat
WHERE matnr = i_mat-matnr.
SELECT vbeln
posnr
parvw
kunnr
FROM vbpa
INTO TABLE i_vbpa
FOR ALL ENTRIES IN i_vbap
WHERE vbeln = i_vbap-vbeln .
SORT i_vbap BY vbeln posnr.
REFRESH i_tvbpa.
REFRESH i_tpartf.
CLEAR i_tpartf.
*FOR FETCHING UNIQUE PARTNER FUNCTIONS
LOOP AT i_vbpa.
i_tpartf-parvw = i_vbpa-parvw.
APPEND i_tpartf.
ENDLOOP.
SORT i_tpartf BY parvw.
DELETE ADJACENT DUPLICATES FROM i_tpartf
COMPARING parvw.
SELECT spras
parvw
vtext
FROM tpart
INTO TABLE i_tvbpa
FOR ALL ENTRIES IN i_tpartf
WHERE parvw = i_tpartf-parvw AND spras = sy-langu.
IF NOT i_vbap[] IS INITIAL.
SELECT vbeln
posnr
etenr
ettyp
lfrel
edatu
FROM vbep
INTO TABLE i_vbep
FOR ALL ENTRIES IN i_vbap
WHERE vbeln = i_vbap-vbeln.
ENDIF.
SORT i_vbap BY vbeln posnr.
to fetch data from internal table to print report
LOOP AT i_vbak.
WRITE:/1 sy-vline,10 v_chkbox AS CHECKBOX, i_vbak-vbeln,28
sy-vline,
30 i_vbak-erdat,48 sy-vline,
50 i_vbak-vkorg, 132 sy-vline.
ENDLOOP.
ULINE.
ENDFORM. " SELECT_HEADERDATA
*& Form ZF_SELECT_DETAILS
SUBROUTINE FOR DISPLAYING SELECTED ITEM DETAILS DATA
--> p1 text
<-- p2 text
FORM zf_select_details .
vflag = 0.
WRITE:/1 sy-vline,10 text-006 COLOR 3,28 sy-vline,
30 text-007 COLOR 3, 48 sy-vline,
50 text-008 COLOR 3, 68 sy-vline,
70 text-022 COLOR 3, 132 sy-vline.
ULINE.
CLEAR i_selvbap.
CLEAR i_final.
REFRESH i_selvbap.
REFRESH i_final.
CLEAR i_mat1.
vnline = 7.
DO.
READ LINE vnline FIELD VALUE i_vbak-vbeln v_chkbox.
" READING LINES FROM BASIC LIST.
IF sy-subrc <> 0. " no lines read.
EXIT.
ENDIF.
IF v_chkbox = 'X'.
" checking of selected items from basic list.
*alpha conversion function - During conversion from the external to the
*internal format, the system checks to see
*if input is purely nummeric or not ,if not all spaces to the left of
*the value are filled with zeroes ('0').
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = i_vbak-vbeln
IMPORTING
output = i_selvbap-vbeln.
APPEND i_selvbap.
" appending values from header line to body.
flag = flag + 1.
" TO CHECK VALUE OF CHECKBOX.
CLEAR i_vbak.
" clearing of header line after appending.
ENDIF.
vnline = vnline + 1.
ENDDO.
IF flag <> 0.
CLEAR i_final.
CHECK NOT i_selvbap[] IS INITIAL.
LOOP AT i_selvbap.
LOOP AT i_vbap WHERE vbeln = i_selvbap-vbeln.
READ TABLE i_mat1 WITH KEY matnr = i_vbap-matnr BINARY SEARCH.
IF sy-subrc = 0.
i_final-vbeln = i_vbap-vbeln.
i_final-posnr = i_vbap-posnr.
i_final-matnr = i_vbap-matnr.
i_final-maktx = i_mat1-maktx.
APPEND i_final.
CLEAR i_mat1.
ENDIF.
ENDLOOP.
CLEAR i_selvbap.
CLEAR i_vbap.
CLEAR i_final.
ENDLOOP.
ENDIF.
IF flag = 0.
MESSAGE e005.
ENDIF.
to fetch data from internal table to print report
LOOP AT i_final.
WRITE:/1 sy-vline,10 v_chkbox1 AS CHECKBOX,i_final-vbeln,28 sy-vline
30 i_final-posnr, 48 sy-vline,
50 i_final-matnr, 68 sy-vline,
70 i_final-maktx,
132 sy-vline.
ENDLOOP.
ULINE.
ENDFORM. " ZF_SELECT_DETAILS
*& Form ZF_TOLS
text
--> p1 text
<-- p2 text
FORM zf_tols .
*printing header of secondary list
ULINE.
WRITE:/10 text-023,20 text-001 COLOR 4, 45 text-019 COLOR 4.
WRITE: 80 text-024,90 sy-datum .
WRITE:/10 text-025,20 text-027,80 text-026,90 sy-pagno.
WRITE:/.
ULINE.
ENDFORM. " ZF_TOLS
*& Form ZF_TOP
text
--> p1 text
<-- p2 text
FORM zf_top .
*printing header of basic list
ULINE.
WRITE:/10 text-023,20 text-001 COLOR 4 ,45 text-002 COLOR 4.
WRITE: 80 text-024, 90 sy-datum.
WRITE:/10 text-025,20 text-027,80 text-026,90 sy-pagno.
ULINE.
WRITE:/1 sy-vline, 10 text-003 COLOR 3 ,28 sy-vline,
30 text-004 COLOR 3 ,48 sy-vline,
50 text-005 COLOR 3 ,132 sy-vline.
ULINE.
ENDFORM. " ZF_TOP
*& Form ZF_PARTNERDETAILS
SUBROUTINE FOR DISPLAYING SELECTED PARTNER DETAILS DATA
--> p1 text
<-- p2 text
FORM zf_partnerdetails .
IF vflag = 1.
WRITE:/1 sy-vline,10 text-016 COLOR 3,28 sy-vline,
30 text-017 COLOR 3,48 sy-vline,
30 text-018 COLOR 3,48 sy-vline,
70 text-021 COLOR 3, 132 sy-vline.
ULINE.
CLEAR i_selvbpa.
REFRESH i_selvbpa.
" clearing work area and body of internal tables
REFRESH i_finalpd.
vnline = 7.
DO.
CLEAR i_selvbpa.
READ LINE vnline FIELD VALUE i_vbak-vbeln v_chkbox.
" READING LINES FROM BASIC LIST.
IF sy-subrc <> 0.
" NO LINES READ
EXIT.
ENDIF.
IF v_chkbox = 'X'.
" if any value is selected
*converts any number into a string fill with zeroes, with the number at
*the extreme right.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = i_vbak-vbeln
IMPORTING
output = i_selvbpa-vbeln.
APPEND i_selvbpa.
CLEAR i_vbak.
flag = flag + 1.
ENDIF.
vnline = vnline + 1.
ENDDO.
IF flag <> 0.
CHECK NOT i_selvbpa[] IS INITIAL.
LOOP AT i_selvbpa.
LOOP AT i_vbpa WHERE vbeln = i_selvbpa-vbeln.
READ TABLE i_tvbpa WITH KEY parvw = i_vbpa-parvw BINARY SEARCH
IF sy-subrc = 0..
i_finalpd-vbeln = i_vbpa-vbeln.
i_finalpd-posnr = i_vbpa-posnr.
i_finalpd-parvw = i_vbpa-parvw.
i_finalpd-vtext = i_tvbpa-vtext.
APPEND i_finalpd.
CLEAR i_tvbpa.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
IF flag = 0.
MESSAGE e005.
ENDIF.
LOOP AT i_finalpd.
WRITE:/1 sy-vline,10 i_finalpd-vbeln, 28 sy-vline,
30 i_finalpd-posnr, 48 SY-VLINE,
30 i_finalpd-parvw, 48 sy-vline,
70 i_finalpd-vtext, 132 sy-vline.
ENDLOOP.
ULINE.
ENDIF.
ENDFORM. " ZF_PARTNERDETAILS
*& Form ZF_SCHEDULEDATA
SUBROUTINE FOR DISPLAYING SELECTED ITEM SCHEDULE DATA
--> p1 text
<-- p2 text
FORM zf_scheduledata .
vflag = 0.
WRITE:/1 sy-vline,10 text-009 COLOR 3,18 sy-vline,
20 text-011 COLOR 3,38 sy-vline,
40 text-012 COLOR 3,58 sy-vline,
60 text-013 COLOR 3,78 sy-vline,
80 text-020 COLOR 3,98 sy-vline,
100 text-015 COLOR 3,132 sy-vline.
ULINE.
CLEAR i_selvbep.
REFRESH i_selvbep.
vnline1 = 5.
CLEAR flag.
CLEAR i_final.
REFRESH i_finalsd.
DO.
READ LINE vnline1 FIELD VALUE i_final-vbeln v_chkbox1 i_final-posnr
. " READING LINES FROM BASIC LIST.
IF sy-subrc <> 0.
EXIT.
ENDIF.
IF v_chkbox1 = 'X'.
*converts any number into a string fill with zeroes, with the number at
*the extreme right
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = i_final-vbeln
IMPORTING
output = i_selvbep-vbeln.
i_selvbep-posnr = i_final-posnr.
APPEND i_selvbep.
CLEAR i_final.
flag = flag + 1.
ENDIF.
vnline1 = vnline1 + 1.
ENDDO.
IF flag <> 0.
CHECK NOT i_selvbep[] IS INITIAL.
LOOP AT i_selvbep.
LOOP AT i_vbep WHERE vbeln = i_selvbep-vbeln AND posnr =
i_selvbep-posnr.
i_finalsd-vbeln = i_vbep-vbeln.
i_finalsd-posnr = i_vbep-posnr.
i_finalsd-etenr = i_vbep-etenr.
i_finalsd-ettyp = i_vbep-ettyp.
i_finalsd-lfrel = i_vbep-lfrel.
i_finalsd-edatu = i_vbep-edatu.
APPEND i_finalsd.
CLEAR i_selvbep.
CLEAR i_vbep.
CLEAR i_finalsd.
ENDLOOP.
ENDLOOP.
ENDIF.
IF flag = 0.
MESSAGE e005.
ENDIF.
LOOP AT i_finalsd.
WRITE:/1 sy-vline,10 i_finalsd-vbeln,18 sy-vline,
20 i_finalsd-posnr, 38 sy-vline,
40 i_finalsd-etenr, 58 sy-vline,
60 i_finalsd-ettyp, 78 sy-vline,
80 i_finalsd-lfrel, 98 sy-vline,
100 i_finalsd-edatu,132 sy-vline.
CLEAR i_finalsd.
ENDLOOP.
ULINE.
ENDFORM. " ZF_SCHEDULEDATA
*& Form ZF_PARTNERDETAILS1
text
--> p1 text
<-- p2 text
FORM zf_partnerdetails1 .
vflag = 1.
WRITE:/1 sy-vline,10 text-016 COLOR 3,18 sy-vline,
20 text-017 COLOR 3,38 sy-vline,
40 text-018 COLOR 3,58 sy-vline,
60 text-021 COLOR 3,78 sy-vline,
132 sy-vline.
ULINE.
CLEAR i_selvbpa1.
REFRESH i_selvbpa1.
REFRESH i_finalpd1.
vnline1 = 7.
DO.
CLEAR I_SELVBEP.
READ LINE vnline1 FIELD VALUE i_final-vbeln v_chkbox1 i_final-posnr
. " READING LINES FROM BASIC LIST.
IF sy-subrc <> 0.
EXIT.
ENDIF.
IF v_chkbox1 = 'X'.
*converts any number into a string fill with zeroes, with the number at
*the extreme right
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = i_final-vbeln
IMPORTING
output = i_selvbpa1-vbeln.
i_selvbpa1-posnr = i_final-posnr.
APPEND i_selvbpa1.
CLEAR i_final.
flag = flag + 1.
ENDIF.
vnline1 = vnline1 + 1.
ENDDO.
IF flag <> 0.
CLEAR i_vbpa.
CLEAR i_finalpd1.
CHECK NOT i_selvbpa1[] IS INITIAL.
LOOP AT i_selvbpa1.
LOOP AT i_vbpa WHERE vbeln = i_selvbpa1-vbeln.
CLEAR i_finalpd1.
IF sy-subrc = 0.
i_finalpd1-vbeln = i_vbpa-vbeln.
IF i_vbpa-posnr = 0 OR i_vbpa-posnr = ''.
i_finalpd1-parvw1 = 'NO DATA EXISTS'.
ELSE.
i_finalpd1-posnr = i_vbpa-posnr.
i_finalpd1-parvw = i_vbpa-parvw.
i_finalpd1-vtext = i_vbpa-vtext.
i_finalpd1-kunnr = i_vbpa-kunnr.
ENDIF.
APPEND i_finalpd1.
IF i_finalpd1-vbeln = i_selvbpa1-vbeln.
EXIT.
ENDIF.
CLEAR i_vbpa.
CLEAR i_finalpd1.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
IF flag = 0.
MESSAGE e005.
ENDIF.
fetching data from internal table for printing.
LOOP AT i_finalpd1.
WRITE:/1 sy-vline,10 i_finalpd1-vbeln,18 sy-vline,
20 I_FINALPD1-POSNR, 38 SY-VLINE,
40 i_finalpd1-parvw1,
58 SY-VLINE,
60 i_finalpd1-vtext,
78 SY-VLINE,
80 i_finalpd1-kunnr,
132 sy-vline.
ENDLOOP.
ULINE.
ENDFORM. " ZF_PARTNERDETAILS1
2nd is :-
REPORT Z8NB_SHA10_1
NO STANDARD PAGE HEADING
LINE-COUNT 30
LINE-SIZE 170
MESSAGE-ID Z8NBSHADOW.
T A B L E D E C L A R A T I O N *
TABLES : LIKP. " Delivery Header.
T Y P E D E C L A R A T I O N *
**-- Type decleration for Delivery Header
TYPES : BEGIN OF T_LIKP,
VBELN LIKE LIKP-VBELN, " Delivery Number
ERDAT LIKE LIKP-ERDAT, " Date on which record was craeted
KUNNR LIKE LIKP-KUNNR, " Sold-to-party
KUNAG LIKE LIKP-KUNAG, " Ship-to-party
TRMTYP LIKE LIKP-TRMTYP, " Means of transport
END OF T_LIKP.
**-- Type decleration for Delivery Items
TYPES : BEGIN OF T_LIPS,
VBELN LIKE LIPS-VBELN, " Delivery Number
POSNR LIKE LIPS-POSNR, " Delivery Item Number
MATNR LIKE LIPS-MATNR, " Material Number
LFIMG LIKE LIPS-LFIMG , " DELIVERED QTY
MEINS LIKE LIPS-MEINS, " Unit of Measurement
BRGEW LIKE LIPS-BRGEW, " Gross Weight
GEWEI LIKE LIPS-GEWEI, " Weight Unit
VOLUM LIKE LIPS-VOLUM, " Volumn
VOLEH LIKE LIPS-VOLEH, " Volumn Unit
END OF T_LIPS.
**-- Type decleration for Customer Details
TYPES : BEGIN OF T_KNA1,
KUNNR LIKE KNA1-KUNNR, " Customer Number
NAME1 LIKE KNA1-NAME1, " Name1
NAME2 LIKE KNA1-NAME2, " Name2
STRAS LIKE KNA1-STRAS, " House/ Street Number
REGIO LIKE KNA1-REGIO, " Region
ORT01 LIKE KNA1-ORT01, " City
LAND1 LIKE KNA1-LAND1, " Country Key
TELF1 LIKE KNA1-TELF1, " First Telephone Number
END OF T_KNA1.
**-- Type decleration for Partner Function
TYPES : BEGIN OF T_KNVP,
KUNNR LIKE KNVP-KUNNR, " Customer Number
PARVW LIKE KNVP-PARVW, " Partner Function
KUNN2 LIKE KNVP-KUNN2, " Cust no of business partner
END OF T_KNVP.
**-- Type decleration for Shipment Header
TYPES : BEGIN OF T_VTTK,
TKNUM LIKE VTTK-TKNUM, " Shipment Number
TNDR_CRNM LIKE VTTK-TNDR_CRNM, " Carrier
END OF T_VTTK.
**-- Type decleration for Shipment Item
TYPES : BEGIN OF T_VTTP,
TKNUM LIKE VTTP-TKNUM, " Shipment Number
VBELN LIKE VTTP-VBELN, " Order Number
END OF T_VTTP.
**-- Type decleration for Material Description
TYPES : BEGIN OF T_MAKT,
MATNR LIKE MAKT-MATNR, " Material Number
MAKTX LIKE MAKT-MAKTX, " Material Description
END OF T_MAKT.
**-- Type decleration for Final table containing all item details
TYPES : BEGIN OF T_FINAL,
VBELN LIKE LIPS-VBELN, " Delivery Number
POSNR LIKE LIPS-POSNR, " Delivery Item Number
MATNR LIKE LIPS-MATNR, " Material Number
LFIMG LIKE LIPS-LFIMG , " DELIVERED QTY
MEINS LIKE LIPS-MEINS, " Unit of Measurement
BRGEW LIKE LIPS-BRGEW, " Gross Weight
GEWEI LIKE LIPS-GEWEI, " Weight Unit
VOLUM LIKE LIPS-VOLUM, " Volumn
VOLEH LIKE LIPS-VOLEH, " Volumn Unit
MAKTX LIKE MAKT-MAKTX, " Material Description
END OF T_FINAL.
C O N S T A N T D E C E L E R A T I O N *
CONSTANTS: C_RE(4) TYPE C VALUE 'RE', "Bill-to-party
C_EQ(4) TYPE C VALUE 'EQ', "Equal To
C_I(2) TYPE C VALUE 'I'. "Inclusion
V A R I A B L E D E C E L E R A T I O N *
DATA : V_SUM TYPE LIPS-LFIMG, "For calculating total of Quantity.
V_SUM_FINAL TYPE LIPS-LFIMG, "For displaying total
V_DESC TYPE C LENGTH 20. "Storing Description
I N T E R N A L D E C L A R A T I O N *
**-- Internal table for delivery header data
DATA: IT_LIKP TYPE STANDARD TABLE OF T_LIKP WITH HEADER LINE,
**-- Internal table for delivery item data
IT_LIPS TYPE STANDARD TABLE OF T_LIPS WITH HEADER LINE,
**-- Internal table for bill-to-party details
IT_KNA1 TYPE STANDARD TABLE OF T_KNA1 WITH HEADER LINE,
**-- Internal table to store partner function data
IT_KVNP TYPE STANDARD TABLE OF T_KNVP WITH HEADER LINE,
**-- Internal table for shipment header data
IT_VTTK TYPE STANDARD TABLE OF T_VTTK WITH HEADER LINE,
**-- Internal table for shipmant item data
IT_VTTP TYPE STANDARD TABLE OF T_VTTP WITH HEADER LINE,
**-- Internal table for material description
IT_MAKT TYPE STANDARD TABLE OF T_MAKT WITH HEADER LINE,
**-- Internal table for final item details
IT_FINAL TYPE STANDARD TABLE OF T_FINAL WITH HEADER LINE,
**-- Temporary internal table for Shipment Item
IT_VTTP_TEMP TYPE STANDARD TABLE OF T_VTTP WITH HEADER LINE,
**-- Temporary internal table for delivery item
IT_LIPS_TEMP TYPE STANDARD TABLE OF T_LIPS WITH HEADER LINE,
**-- Temporary internal table for delivery header
IT_LIKP_TEMP TYPE STANDARD TABLE OF T_LIKP WITH HEADER LINE.
**-- Ranges for Inquiry/Quotation
RANGES R_CUSTOMER FOR KNA1-KUNNR.
S E L C T I O N S C R E E N *
**-- Selection screen containing Delivery no as the obligatory field
SELECTION-SCREEN BEGIN OF BLOCK CHARLY WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_VBELN FOR LIKP-VBELN OBLIGATORY.
SELECTION-SCREEN END OF BLOCK CHARLY.
I N I T I A L I Z A T I O N *
INITIALIZATION.
**-- Clear all internal tables
CLEAR : IT_LIKP,
IT_LIPS,
IT_KNA1,
IT_KVNP,
IT_VTTK,
IT_VTTP,
IT_MAKT,
IT_FINAL,
IT_VTTP_TEMP,
R_CUSTOMER,
V_SUM,
V_SUM_FINAL,
V_DESC.
**-- Refresh all internal tables
REFRESH : IT_LIKP,
IT_LIPS,
IT_KNA1,
IT_KVNP,
IT_VTTK,
IT_VTTP,
IT_MAKT,
IT_FINAL,
IT_VTTP_TEMP,
R_CUSTOMER.
A T S E L E C T I O N S C R E E N ( V A L I D A T I O N S ) *
AT SELECTION-SCREEN.
**-- Check the sales order number exists in the database table or not
SELECT SINGLE VBELN
FROM LIKP
INTO IT_LIKP
WHERE VBELN IN S_VBELN.
**-- If no single data selected display error message.
IF SY-SUBRC <> 0.
MESSAGE E000.
ENDIF.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
**-- Fetch data from the transprant tables into the internal tables
PERFORM GET_DATA.
**-- Final table for complete item data
PERFORM FINAL_DATA.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
**-- Display of Delivery Note
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
FORM GET_DATA .
**-- Fetch data from Delivery Header Table ( LIKP )
SELECT VBELN
ERDAT
KUNNR
KUNAG
TRMTYP
FROM LIKP
INTO TABLE IT_LIKP
WHERE VBELN IN S_VBELN
ORDER BY VBELN.
**-- Check SY_SUBRC.
IF SY-SUBRC <> 0 .
ENDIF.
**-- If record is present in IT_LIKP internal table then fetch data from
**-- Delivery Item table (LIPS)
IF NOT IT_LIKP[] IS INITIAL.
SELECT VBELN
POSNR
MATNR
LFIMG
MEINS
BRGEW
GEWEI
VOLUM
VOLEH
FROM LIPS
INTO TABLE IT_LIPS
FOR ALL ENTRIES IN IT_LIKP
WHERE VBELN = IT_LIKP-VBELN.
**-- If record found, sort the internal table on delivery no and item no
IF SY-SUBRC = 0.
SORT IT_LIPS BY VBELN POSNR.
ENDIF.
ENDIF.
**-- If record present in IT_LIPS internal table then fetch data from
**-- Shipment Item Table where delivery number is same
IF NOT IT_LIPS[] IS INITIAL.
SELECT TKNUM
VBELN
FROM VTTP
INTO TABLE IT_VTTP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN.
**-- If record found, sort the internal table on shipment no
IF SY-SUBRC = 0.
SORT IT_VTTP BY TKNUM.
ENDIF.
ENDIF.
**-- Move records in IT_LIPS to an temporary internal table for
**-- removing the duplicate entries of material number.
IT_LIPS_TEMP[] = IT_LIPS[].
SORT IT_LIPS_TEMP BY MATNR.
DELETE ADJACENT DUPLICATES FROM IT_LIPS_TEMP
COMPARING MATNR.
IF NOT IT_LIPS_TEMP[] IS INITIAL.
**-- Fetch Material description from MAKT for all materials in
**-- IT_LIPS_TEMP
SELECT MATNR
MAKTX
INTO TABLE IT_MAKT
FROM MAKT FOR ALL ENTRIES IN IT_LIPS_TEMP
WHERE MATNR = IT_LIPS_TEMP-MATNR.
**-- If record found, sort the internal table on Matreial No.
IF SY-SUBRC = 0.
SORT IT_MAKT BY MATNR.
ENDIF.
ENDIF.
**-- Transfer data in shipment item internal table to a temporary
**-- internal table to delete duplicate entries of shipment number.
IT_VTTP_TEMP[] = IT_VTTP[].
SORT IT_VTTP_TEMP BY TKNUM.
DELETE ADJACENT DUPLICATES FROM IT_VTTP_TEMP
COMPARING TKNUM.
**-- If record found in IT_VTTP_TEMP then fetch shipment no and carrier
**--from Shipment Header Table(VTTK).
IF NOT IT_VTTP_TEMP[] IS INITIAL.
SELECT TKNUM
TNDR_CRNM
FROM VTTK
INTO TABLE IT_VTTK
FOR ALL ENTRIES IN IT_VTTP_TEMP
WHERE TKNUM = IT_VTTP_TEMP-TKNUM.
**-- If record found, sort the internal table on shipment no
IF SY-SUBRC = 0.
SORT IT_VTTK BY TKNUM.
ENDIF.
ENDIF.
**-- Move the data of IT_LIKP to an internal table to remove the
**-- duplicate entries of sold-to-party number.
IT_LIKP_TEMP[] = IT_LIKP[].
SORT IT_LIKP_TEMP BY KUNAG.
DELETE ADJACENT DUPLICATES FROM IT_LIKP_TEMP
-
How good is the Photo Downloader at detecting duplicates?
I have only tested the Photo Downloader (with version 1.2) once, and I got a couple of hundred duplicates on my disc. I had images on the card that I had downloaded before using other software, but images that was already in the LR library.
So, I'm not sure that I dare to use the Downloader again as long as my card has still old photos on it.
What are other users experience with this program?
Other programs I have used for downloading from the card uses the Archive-attribute so it can know for sure if a picture has been downloaded or not, so why does not LR do that? I'm not sure if Mac has the same file attribute, or if all camera manufactures uses it, but if they do, then it could be a good idea for LR to do the same.I suspect no better than it is at detecting duplicates by regular import. Here is a quote from an earlier post of mine on the subject of LR's inconsistency in detecting duplicates. That was with 1.2. I have not fron a formal test on 1.3 yet, but informally it seems to catch more than 1.2--but that is just an impression. For sure, it is not getting them all by any means. That I know from importing in 1.3 and seeing identical files in the import. By identical I mean everything, name, ext, size, dates, crc,everthing--abjectly identical. I will run some tests when I get an hour or two. By the way does anyone know for sure just what attribues of an image LR uses to determine identicality. Given the use of the word 'suspected' duplicates, I suspect that it isn't a very rigorous test. Something is either a duplicate or not!
Here is what I posted earlier based on testing:
"I have recently undertaken to run a serious test of LR 1.2--as I did with previous versions-- to see if it was at the stage of development where it would improve my workflow over my present applications. Most everything is much better than before, but I have discovered a killer bug.
I work in a group of four other photographers. We are constantly mixing and matching images from our various DBs/shots for client presentations, frequently mixing shots already in a DB with some that are recent and not yet DBed In the end, of course, we want one DB that incorporates all our collective images. This arrangement lends itself to imports that often will contain duplicates of given, uniquely identified, images.
I discovered that even with the box checked to not import duplicates, that LR is hopelessly inconsistent in stopping the import of absolutely identical files with absolutely identical names, extensions, metadata, etc.
As a test, I imported a set of 50 images--various formats, etc--all of which were in LR already. I ran the test three times. The first test resulted in LR identifying 3 dups, the second test 17 dups, and the third 13 dups. I also tried this test using images that were in two separate LR catalogues--identical in every respect. LR did not identify even one duplicate image of the fifty in this case.
Is this a known bug? Anyone have any suggestions? TIA " -
Does any one hav a program that will detect duplicate photos on iophoto
Can any one help with a program that will detect duplicate photos in i photo
Thanks in advanceHi,
You can ask in the iPhoto forum as well.
https://discussions.apple.com/community/ilife/iphoto
Carolyn -
Is there a way to detect duplicates?
I have several Albums that are very large. Is there an easy way to detect duplicates within the same Album in iPhoto?
ThanksHere's my updated review of duplicate finder apps:
These applications will identify and help remove duplicate photos from an iPhoto Library:
iPhoto Library Manager - $29.95
Duplicate Annihilator - $7.95 - only app able to detect duplicate thumbnail files or faces files when an iPhoto 8 or earlier library has been imported into another.
PhotoSweeper - $9.95 - This app can search by comparing the image's bitmaps or histograms thus finding duplicates with different file names and dates.
DeCloner - $19.95 - can find duplicates in iPhoto Libraries or in folders on the HD.
DupliFinder - $7 - shows which events the photos are in.
iPhoto AppleScript to Remove Duplicates - Free
PhotoDedupo - $4.99 (App Store) - this app has a "similar" search feature which is like PhotoSweeper's bitmap comparison. It found all duplicates
Duplicate Cleaner for iPhoto - free - was able to recognize the duplicated HDR and normal files from an iPhone shooting in HDR
Some users have reported that PhotoSweeper did the best in finding all of the dups in their library: iphoto has duplicated many photos, how...: Apple Support Communities.
If you have an iPhone and have it set to keep the normal photo when shooting HDR photos the two image files that are created will be duplicates in a manner of speaking (same image) but there are only twp apps that detected the iPhone HDR and normal photos as being duplicates: PhotoSweeper and Duplicate Cleaner for iPhoto. None of the other apps detected those two files as being duplicates as they look for file name as well as other attributes and the two files from the iPhone have different file names.
iPLM, however, is the best all around iPhoto utility as it can do so much more than just find duplicates. IMO it's a must have tool if using iPhoto. -
We're running two servers in a datacentre, call them WEB1 and WEB2 in unicast NLB mode.
Each server has a public NIC, the NLB adapter and a private NIC for communication between hosts. We have a VLAN between the public NICs so the cluster IP is routed to both hosts. I can access the Virtual IP just fine, and hosts can talk on the separate private
network. The public NICs are connected up to a Cisco switch with a VLAN between two ports, one for WEB1 and one for WEB2 (all done by the datacentre).
Intermittently on WEB2, I lose connection from my local machine and the Event Logs show multiple:
NLB cluster []: NLB detected duplicate cluster subnets. This may
be due to network partitioning, which prevents NLB heartbeats of one or more
hosts from reaching the other cluster hosts. Although NLB operations have
resumed properly, please investigate the cause of the network partitioning.
WEB1 works just fine and doesn't suffer from these issues. Removing WEB2 from the NLB cluster leaves everything working fine (with just the single WEB1 left).
Perhaps unrelated but for WEB1 & WEB2, the interface metric for the private NIC is 10 while the public NIC is 20 (although 'route print' shows much higher values around 270-300). [seems this is correct according to http://blogs.technet.com/b/tristank/archive/2004/06/08/150734.aspx]
Really hoping someone can help as NLB seems a great solution!
Thanks ever so muchHi, no luck with this I'm afraid. Both NICs are configured the same, not sure what you mean by the NIC binding order. Cabling is definitely fine.
We're just sticking it out. As this is running on a live set up I had to get things working so put the NLB cluster into Single Host mode with WEB1 as the default host. This meant traffic worked fine while I still had frequent disconnections to WEB2.
After about 24 hours, the error stopped. When anything changes the cluster, ie one of the servers is restarted for updates, it does this error for about 24 hours then settles down.
I have no idea if the Single Host mode is helping this or not - perhaps it just takes 24 hours for it to settle down. Would it also settle down if I wasn't in Single Host mode? No idea and won't try it as its a live set up. Is NLB working properly? Most
probably not! However if WEB1 dies, WEB2 does take over connections all itself and works fine till WEB1 comes back online (requests go back to WEB1) and WEB2 starts to disconnect for the roughly 24 hours.
Anyone from the Microsoft Networking team able to shed any light on this? Please? -
Can numbers detect duplicate date information as I enter it?
Hi. I need to take an inventory of over 4,000 film can that we have in our vault. First I need to go though get basic information from each can. I created a simple spreadsheet in numbers to track this information. We are tracking these cans by the date on the side of each one. Most of these dates are unique, but there may be some duplicates. What I need is some way for the spreadsheet to alert me to the fact that I am entering a duplicate date when I enter it so I can add an additional indicator to the date. This way I won't have two cans with the same title. Is there a way for Numbers to detect duplicate information as I enter it?
-KarinWhen the table contain numerous rows, it may be useful to use a footer row so that the footer of the column containing the flag to duplicates display the index of the higher flagged row.
In C2, the formula is :
=IF(COUNTIF(B,B2)>1, ROW(),999999)
Apply fill down to fill every 'standard' cells of column C.
Apply a conditional format to this column : set ink to white if the value is 999999
At last, in the footer cell (C14) insert the formula :
=SMALL(C,1)
So you will automatically know which is the existing row which we are duplicating.
I expanded this feature to display in the footer the contents of this duplicated row so there will not be necessary to move in the table to know this contents.
In A14, the formula is :
=IF($C14>0,OFFSET(A$1,$C14-1,0),"")
and apply fill to the right to get this formula in B14 :
=IF($C14>0,OFFSET(B$1,$C14-1,0),"")
Yvan KOENIG (VALLAURIS, France) samedi 5 mars 2011 16:01:03 -
[SOLVED] Detect duplicate songs
Hello,
what's a good program to detect duplicates of mp3s that I could easily get with pacman -S ?
Last edited by willxtreme (2010-01-10 19:49:17)Thank you it's wonderful!
Edit: it did detect some duplicates
The only problem is it didn't detect them all
I had the songs both 5.1Mb same lenght who weren't detected:
Tibob - 77x7 Fwa.mp3
77x7 Fwa.mp3
Last edited by willxtreme (2010-01-10 19:45:30) -
How do I detect duplicates?
I just installed PSE 10 and it says I can detect Duplicates, I need this bad, but can't figure out how to do it. Help
Hi Kesam,
You can select the set of images that you want to apply duplicate photo search on, right clicking on the selection and clicking Stack >> Automatically suggest photo stacks.
And as watchar suggested, without making any selection (to perform duplicate photosearch on entire catalog), click the searchbox arrow as shown here-
Thanks
andaleeb -
Can Iphoto detect duplicate photos in a library?
Team
Been using Iphoto as my primary photo viewing option, containing photos going back some 10 +years. I am alos running time machine for the back up option. In that time I have had a library crash which resulted in the libraries being rebuilt. I am also now taking more photos on my Iphone and then improting them into the library. I have two issues:
1) What ever the cause I when I view the library structure I have countless rols which I would prefer to organise into a more structured and complete album. I understand under Albums you can create folders and sub albums for viewing what you want but the I photo viewing screen defaults to the library which in my case defaults to countless events or countless rolls.
2) What ever the cause I have ended up with many of my earlier albums / rolls containing multiple copies of the same photo - up to 5 and 6 in some instances. I am reluctant to go through an delete them one by one as I am concerned that without checking the individual photo size I may end up deleting the photo and leaving a thumbnail.
3) is it possible for Iphoto to detect duplicated photos (like I tunes can do with music) so that these can be viewed in a separate screen and the duplicates viewed and deleted.?
Cheers in advance.TD
Mate hope your on a retainer, Duplicate Annihilator, cheap, functional and seems to be doing its things.
Thanks.
Is it possible to ge the Library to only show events from like the last month?? rather than showing everthing - I have to scroll through pages of events / photo rolls to get to the ones I am using at the moment.
Cheers again
MCJ
Maybe you are looking for
-
Hello The registry entry is available but the installer finds nothing. in the registry but the entry is present and can I use another program to read. works not only with B1AddOnInstallerSetupNET can anyone help me?
-
Designing XML Page using JDeveloper
Dear Members, Iam using JDeveloper 9i Verson to develop OAF Pages and deploy on Oracle Applications 11i. In this OAF XML Page I have a table where user inputs data into it. During design time, I create regions, message text input and use spacers to d
-
Hi; Is there a way to print every page in a site at one time ? A client wants to do this, but I don't think it's possible. Is it ? Thanks; Pat
-
Data-driven GUI construction at runtime
I am designing a patient simulation program for a veterinary college. I need to have a GUI that is built at runtime from data tables for each patient. One patient may have 3 pages of laboratory data and would need three tabbed panes while another may
-
This occurs on two different machines, one XP and one Win 7. I seems to occur when I close Firefox with a search or load in progress. There are no applications shown in the task manager, so there must be a process still finishing up. What would the p