Detecting the gateway
i want to be able to get the ip of the local machine's gateway. the only way i can think of doing this is through running an ipconfig and using a stream to capture all the data and extract the gateway from there.
is there a more elegant way of getting the machine's gateway?
i wish it were that easy...i already tried that :/
eth0 Link encap:Ethernet HWaddr 00:09:6B:25:34:79
inet addr:138.92.194.10 Bcast:138.92.194.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29361122 errors:0 dropped:0 overruns:0 frame:0
TX packets:29226561 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2037166823 (1942.7 Mb) TX bytes:4069859496 (3881.3 Mb)
Interrupt:29
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:615943 errors:0 dropped:0 overruns:0 frame:0
TX packets:615943 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:72854075 (69.4 Mb) TX bytes:72854075 (69.4 Mb)
Similar Messages
-
Hi Experts,
We have installed UISKPI01 in SAP NetWeaver Gateway System for Fiori Analytical Apps (KPI modeler is necessary to model the KPI) but while trying to create and Save the Group, we are Getting an error in KPI Modeler as "{"customMessage":"failed to detect the sap language of the current session language","status":500}". Similarly, when we are trying to edit the existing KPI template and assigning the Variants and Evaluations, we are facing the same error as failed to detect the sap language of the current session language","status":500.
Any idea on above error?
Thanking you,
~ MahendraHello Mahendra,
Check if you have entries in the T002 table of SAP_SSB schema.
If not follow the steps mentioned in the admin guide of SAP Smart business to populate data.
This should resolve this issue.
Note: My assumption is that, you are accessing the KPI modeler in English Language.
Thanks,
Debasish -
Hi,
My analog node is set to sample at a certain frequency, say once every 5 seconds. How do I know that the data has arrived at the gateway from the VI on my computer ? Is there an event listener for incoming data ? Really appreciate if someone can enlighten me on this. Thank you very much !
Regards,
XinkeHello Xinke
Thank you for your post, please correct me if I have misunderstood but from your description it sounds like you are looking to detect that the data is being transferred correctly from your device to the PC.
In the LabVIEW example finder there is a section on DAQmx events under the hardware heading, I recommend that you look here, the title of the example is Acq&Graph Voltage-Int Clk-EveryN&DoneEvent, I also recommend that you play with this vi to see how you can use the events with DAQmx.
Another way to check that your task is functioning correctly would be to create a Boolean indicator for the error status, I have created a small section of code that illustrates this.
If you have any further questions, please get in touch.
Regards
Stephanie L
Applications Engineer
National Instruments UK and Ireland
Attachments:
status.vi 16 KB -
WLC cannot detect the CAPWAP 3602E
Hi Guys,
We setup some new CAPWAP AP 3602E in the network and configure the DHCP server option 43 , but the WLCs still cannot detect the APs , Do you know if there any new way to troubleshooting?
WLC: 5508 version: 7.2.103.0
SW:3750E
AP: AIR-CAP3602E-C-K9*Jan 20 06:41:20.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
fault route for existing gateway 10.x.x.x
*Jan 20 06:41:20.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
ult route for gateway 10.x.x.x
*Jan 20 06:41:20.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway fo
und 10.x.x.x
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing disco
very latency in discovery responses.
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
fault route for existing gateway 10.x.x.x
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
ult route for gateway 10.x.x.x
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway fo
und 10.x.x.x
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
fault route for existing gateway 10.x.x.x
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
ult route for gateway 10.x.x.x
*Jan 20 06:41:30.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway fo
und 10.x.x.x
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing disco
very latency in discovery responses.
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
fault route for existing gateway 10.x.x.x
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
ult route for gateway 10.x.x.x
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway fo
und 10.x.x.x
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Removing de
fault route for existing gateway 10.x.x.x
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding defa
ult route for gateway 10.x.x.x
*Jan 20 06:41:40.783: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway fo
und 10.x.x.x
*Jan 20 06:41:50.783: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
*Jan 20 06:41:50.783: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing disco
very latency in discovery responses. -
Error while creating request list Unable to detect the SAP system directory
We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
PrathapDid you get this solved?
I have the same problem -
I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?
Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer. -
Does dvi to HDMI adapter works on mid 2007 iMac? Some how my iMac detect the sharp tv but the tv screen is black.
you need mini dvi to hdmi cable
http://store.apple.com/us/product/M9321G/B/apple-mini-dvi-to-dvi-adapter?fnode=5 1
and
http://store.apple.com/us/product/HA835ZM/A/belkin-hdmi-to-dvi-d-cable-2-m66-ft? fnode=51 -
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).
There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit -
help! i've googled around, but none seems to solve my problem
my macbook pro is early 2011, 13", running lion.
the philips monitor is vga only, so i have a mini display port to vga adaptor and connecting it to the vga.
the screen on my mbp does turn blue, but no input is detected on the external monitor.
any advice?If it does not detect the display automatically, try going to system preferences>displays, click detect displays.
-
just a summary...
i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
now, back to the topic..
so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
"4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
after reinstallation of itunes my DVD drive can be seen and just noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
so going back to the topic..
i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
so now i opened iTunes and BOOOM!
iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
[for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
and then you will see the screen below
click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
BUT the problem here is that your iPhone can't be detected on iTunes...
now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.Hi LSGZ,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden -
Hi All,
I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
Siebel Server log file error :
GenericLog
GenericError
1
00006c5c52eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6352eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6452eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6552eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6652eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c7152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
ODBC connectivity is also ok and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr 192.168.0.163:2320 ENU Oracle
Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
Message was edited by: Prabhakar2991Hi Prameela,
You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
=====================================================================================================================================
[oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
Copyright (c) 1994-2012, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain
proprietary information; they are provided under a license agreement containing
restrictions on use and disclosure and are also protected by copyright, patent,
and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the Programs, except to the extent required to
obtain interoperability with other independently created software or as specified
by law, is prohibited.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
If you have received this software in error, please notify Oracle Corporation
immediately at 1.800.ORACLE1.
Type "help" for list of commands, "help <topic>" for detailed help
Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
srvrmgr> list components
SV_NAME CC_ALIAS CC_NAME CT_ALIAS CG_AL IAS CC_RUNMODE CP_DISP_RUN_STATE CP_STARTMODE CP_NUM_RUN_TASKS CP_MAX_TASKS CP_ACTV_MTS_PROCS CP_MAX _MTS_PROCS CP_START_TIME CP_END_TIME CC_INCARN_NO CC_DESC_TEXT
siebelsrvr BusIntBatchMgr Business Integration Batch Manager BusSvcMgr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr BusIntMgr Business Integration Manager BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr SCCObjMgr_enu Call Center Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr CustomAppObjMgr_enu Custom Application Object Manager (ENU) CustomAppObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr DQMgr Data Quality Manager Dqmgr DataQ ual Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr EAIObjMgr_enu EAI Object Manager (ENU) EAIObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr InfraEAIOutbound EAI Outbound Server BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr EIM Enterprise Integration Mgr EIM EAI Batch Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr FSMSrvr File System Manager FSMSrvr Syste mAux Batch Online Auto 0 20 1 1 2014-01-29 02:48:25
siebelsrvr GenTrig Generate Triggers GenTrig Workf low Batch Online Auto 0 1 2014-01-29 02:48:30
siebelsrvr JMSReceiver JMS Receiver EAIJMSRcvr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr MqSeriesAMIRcvr MQSeries AMI Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MqSeriesSrvRcvr MQSeries Server Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MSMQRcvr MSMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SMQReceiver SMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SServiceObjMgr_enu Self Service Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr ServerMgr Server Manager ServerMgr Syste m Interactive Running Auto 2 20 2014-01-29 02:48:20
siebelsrvr SRBroker Server Request Broker ReqBroker Syste m Interactive Running Auto 25 100 1 1 2014-01-29 02:48:20
siebelsrvr SRProc Server Request Processor SRProc Syste mAux Interactive Running Auto 2 20 1 1 2014-01-29 02:48:25
siebelsrvr SvrTblCleanup Server Tables Cleanup BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr SvrTaskPersist Server Task Persistance BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr AdminNotify Siebel Administrator Notification Component AdminNotify Syste mAux Batch Online Auto 0 10 1 1 2014-01-29 02:48:25
siebelsrvr SCBroker Siebel Connection Broker SCBroker Syste m Background Running Auto 1 1 2014-01-29 02:48:20
siebelsrvr WorkActn Workflow Action Agent WorkActn Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WorkMon Workflow Monitor Agent WorkMon Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WfProcBatchMgr Workflow Process Batch Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr WfProcMgr Workflow Process Manager BusSvcMgr Workf low Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr WfRecvMgr Workflow Recovery Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eChannelCMEObjMgr_enu eChannel Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommunicationsObjMgr_enu eCommunications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommWirelessObjMgr_enu eCommunications for Wireless Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCustomerCMEObjMgr_enu eCustomer Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyObjMgr_enu eEnergy Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eMediaObjMgr_enu eMedia Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyOGCObjMgr_enu eOil Gas & Chemicals Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eSalesCMEObjMgr_enu eSales Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eServiceObjMgr_enu eService Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
37 rows returned.
srvrmgr>
=======================================================================================================================================
Please suggest me what to do.
Thanks
Prabhakar -
I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it. -
Greetings,
I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.
Any pointers will be appreciated because so far, my efforts have failed.
Jean-PIerreThere are two (2) ways to cascade a Linksys router to another router:
1. LAN to LAN – Connecting one of the Ethernet ports (LAN ports) of the Linksys router (router A) to one of the Ethernet ports (LAN ports) of another router (router B).
This type of cascading requires the main and the secondary router to be on the same LAN IP segment to allow the computers and other devices to connect to both routers. This configuration is recommended if you want to share files and resources within the network.
2. LAN to WAN – Connecting one of the Ethernet ports (LAN ports) of router A to the Internet port (WAN port) of router B.
This type of cascading requires the main router and the secondary router to have different IP addresses. This connection makes it easier to identify which router the computers and other devices in the network are connected to since they will have different LAN IP segments. However, computers that are connected to router A will not be able to communicate with router B, and vice versa since they are two different networks.
Here is the link for same: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=d4bfc9fde5284a4b845c9057ffbeb644_4735.xml&pid=80&r... -
Communication between the primary server the gateway server
hallo
Can I set the directional communication between the primary server the gateway server, so it feels by the following example?
And if so how?
Agent
à GW
ß GW
ß MS
*Agent communicates with GW1 and reported it
*GW SEND report to GW2
*GW2 Send the the data to MS
thanks
<o:p></o:p>
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.Hi,
As far as I know, Gateways dont talk to each other. Why you need two GW, with one GW and report to your management servers, this way should work.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/323d5aab-bad4-4c23-b096-27a62757ae31/communications-between-2-gateway-servers-and-2-ms?forum=operationsmanagerdeployment
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
Field values directly binded to backend service are getting cleared.
Hi, In HCM Forms & Process, for ex: in a form the header field values are directly binded to SAP_PA backend service and rest of the fields (dropdown list and free text fields) are getting from custom generic service. Now there is also a pushbutton in
-
What exactly is in that MobileSync folder?
Hi all, I have been attempting to clear up some of that mysterious "other" that's taking up a large chunk of my MBP's storage. Based on this link, http://appletoolbox.com/2014/02/mac-os-x-what-is-other-storage-and-how-to-remove /, I found that I've g
-
HANA interfacing with Microsoft front end
Hi, We have a requirement where the front end will be developed with SQL server reporting services(SSRS) via ODBC and some UI parts directly connecting to native HANA via .NET web server. So the architecture is: 1. HANA Native - ODBC - SSRS 2. HANA N
-
Country from ship to in the PA
Hi I need to defined a characteristics: Country from ship to in the PA. Can you guide me how to do it (step by step please...)
-
How to convert .mov to .divx
I want to convert some .mov files to .divx. I've not seen the option in FCE, is there any other way I can do this. Thanks in advance Matt