Determination of String variable weight

Hello,
Is there any way to determine a String variable's weight? in
KB or MB? or any sort of logic that can be implements to determine
this? Actually I have a String variable which is update by various
kind of source data, now I want to stop that updation when the
variable's size limit will be exceed of a certain MB. Is ByteArray
or anything can help on this!
Thanks.
aSB

public String convertDateToString(Date data) {
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat(
"dd/MM/yyyy");
return sdf.format(data);
public Date convertStringToDate(String data) {
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat(
"dd/MM/yyyy");
return sdf.parse(data);
you can find there some info ...
http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html

Similar Messages

Looking for a better way to determine string variable from multiple options

Hi,
I trying to figure out a better way to determine a string variable from multiple options.
Say i have five pictures each with a different filename: img1 - img5...these file names could be named anything really but for this example i will keep them as img1, img2, img3, img4 and img5.
I want to display a messagebox with the string depending on what a certain variable is.
So for example, we have the number X, if X = 1 then i want the messagebox to show "img1" as the message
Essentially the way I have been doing it so far is:
Private Sub WhichImage()
Dim ImageName As String = ""
Dim i as integer
If i = 0 Then
ImageName = "img1"
End If
If i = 1 Then
ImageName = "img2"
End If
If i = 2 Then
ImageName = "img3"
End If
If i = 3 Then
ImageName = "img4"
End If
If i = 4 Then
ImageName = "img5"
End If
MessageBox.show(imagename, "Name of image", MsgBox.Style.OkOnly, MsgBoxResult.Ok)
end
Up until now, this has been fine, but what if I have 50 images, do I have to do this for all 50 images? or is there an easier way like putting the image names into a text file and have it read from the file depending on what the variable i equals? If so,
how do I go about this? Does each image name go on a separate line? can it just be separated by a comma instead? or is there a better way?
Please note that i know that i have declared "i" above in my code and not intialised it with anything, in reality "i" comes from somewhere else in the program so please ignore that part, it is not what I am concerned with.
Thanks
Mersec

Does each image name go on a separate line? can it just be separated by a comma instead? or is there a better way?
Arrays are useful for this.
Dim imagenames() As String = {"img1", "img2", "img3", "img4", "img5"}
Dim imagename As String = imagenames(i)
MessageBox.Show(imagename, "Name of image")
Any sort of collection will do instead of an array, and may be simpler to manage. There are many other options - the most suitable one probably depends on where the names originally come from. For instance, if you are getting them from a folder
using the FileSystem.GetFiles method, then they are already in a collection.
If the files names never change then you may as well include them in the program code, using something like the code above. If they can change, then you could use a text file, but that means you need a file update routine. If that is required
then the way you store the names will dictate how you access them.

How can I put all output error message into a String Variable ??

Dear Sir:
I have following code, When I run it and I press overflow radio button, It outputs following message:
Caught RuntimeException: java.lang.NullPointerException
java.lang.NullPointerException
     at ExceptionHandling.ExceptTest.actionPerformed(ExceptTest.java:72)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:291)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6038)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3260)
     at java.awt.Component.processEvent(Component.java:5803)
     at java.awt.Container.processEvent(Container.java:2058)
     at java.awt.Component.dispatchEventImpl(Component.java:4410)
     at java.awt.Container.dispatchEventImpl(Container.java:2116)
     at java.awt.Component.dispatchEvent(Component.java:4240)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
     at java.awt.Container.dispatchEventImpl(Container.java:2102)
     at java.awt.Window.dispatchEventImpl(Window.java:2429)
     at java.awt.Component.dispatchEvent(Component.java:4240)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)Caught RuntimeException: java.lang.NullPointerException
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)I hope to catch all these error message into a String Variable such as StrErrorMsg, then I can use System.out.println(StrErrorMsg) to print it out or store somewhere, not only display at runtime,
How can I do this??
Thanks a lot,
See code below.
import java.awt.Frame;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import java.io.FileInputStream;
import javax.swing.ButtonGroup;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JRadioButton;
public class ExceptTest extends JFrame implements ActionListener {
    private double[] a;
private JRadioButton divideByZeroButton;
private JRadioButton badCastButton;
private JRadioButton arrayBoundsButton;
private JRadioButton nullPointerButton;
private JRadioButton negSqrtButton;
private JRadioButton overflowButton;
private JRadioButton noSuchFileButton;
private JRadioButton throwUnknownButton;
public ExceptTest() {
    JPanel p = new JPanel();
    ButtonGroup g = new ButtonGroup();
    p.setLayout(new GridLayout(8, 1));
    divideByZeroButton = addRadioButton("Divide by zero", g, p);
    badCastButton = addRadioButton("Bad cast", g, p);
    arrayBoundsButton = addRadioButton("Array bounds", g, p);
    nullPointerButton = addRadioButton("Null pointer", g, p);
    negSqrtButton = addRadioButton("sqrt(-1)", g, p);
    overflowButton = addRadioButton("Overflow", g, p);
    noSuchFileButton = addRadioButton("No such file", g, p);
    throwUnknownButton = addRadioButton("Throw unknown", g, p);
    getContentPane().add(p);
private JRadioButton addRadioButton(String s, ButtonGroup g, JPanel p) {
    JRadioButton button = new JRadioButton(s, false);
    button.addActionListener(this);
    g.add(button);
    p.add(button);
    return button;
public void actionPerformed(ActionEvent evt) {
    try {
      Object source = evt.getSource();
      if (source == divideByZeroButton) {
        a[1] = a[1] / a[1] - a[1];
      } else if (source == badCastButton) {
        Frame f = (Frame) evt.getSource();
      } else if (source == arrayBoundsButton) {
        a[1] = a[10];
      } else if (source == nullPointerButton) {
        Frame f = null;
        f.setSize(200, 200);
      } else if (source == negSqrtButton) {
        a[1] = Math.sqrt(-1);
      } else if (source == overflowButton) {
        a[1] = 1000 * 1000 * 1000 * 1000;
        int n = (int) a[1];
      } else if (source == noSuchFileButton) {
        FileInputStream is = new FileInputStream("Java Source and Support");
      } else if (source == throwUnknownButton) {
        throw new UnknownError();
    } catch (RuntimeException e) {
      System.out.println("Caught RuntimeException: " + e);
      e.printStackTrace();
      System.out.println("Caught RuntimeException: " + e);
    } catch (Exception e) {
      System.out.println("Caught Exception: " + e);
public static void main(String[] args) {
    JFrame frame = new ExceptTest();
    frame.setSize(150, 200);
    frame.addWindowListener(new WindowAdapter() {
      public void windowClosing(WindowEvent e) {
        System.exit(0);
    frame.show();
}

yes, I update as follows,
but not looks good.
import java.io.*;
public class UncaughtLogger implements Thread.UncaughtExceptionHandler {
    private File file;
    private static String errorMessage;
    public UncaughtLogger(File file) {
        this.file = file;
        //Thread.setDefaultUncaughtExceptionHandler(this);
    public UncaughtLogger(String str) {
        this.errorMessage = str;
        Thread.setDefaultUncaughtExceptionHandler(this);
    //@Override()
    public void uncaughtException(Thread t, Throwable e){
        try {
            log(e);
        } catch (Throwable throwable) {
            System.err.println("error in logging:");
            throwable.printStackTrace();
    private void log(Throwable e) throws IOException {
        PrintWriter out = new PrintWriter(new FileWriter(file, true));
        try {
            e.printStackTrace(out);
        } finally {
            out.close();
    private static UncaughtLogger logger = new UncaughtLogger(new File("C:/temp/log.txt"));
    private static UncaughtLogger logger2 = new UncaughtLogger(errorMessage);
    public static void main(String[] args) {
            String s1 = "Hello World!";
            s1 = null;
            String s2 = s1.getClass().getName();
            System.out.println(s1);
            System.out.println(s2);
            System.out.println("errorMessage =" + errorMessage);
}

How to catch exception into a String variable ?

I have a code
catch(Exception e)
            e.printStackTrace();
            logger.error("\n Exception in method Process"+e.getMessage());
        }when i open log i find
Exception in method Process null.
But i get a long error message in the server console !! I think thats coming from e.printStackTrace().
can i get the error message from e.printStackTrace() into a String variable ?
I want the first line of that big stacktrace in a String variable.
How ?

A trick is to issue e.printStackTrace() against a memory-based output object.
void      printStackTrace(PrintStream s)
         // Prints this throwable and its backtrace to the specified print stream.
void      printStackTrace(PrintWriter s)
//          Prints this throwable and its backtrace to the specified print writer.Edited by: BIJ001 on Oct 5, 2007 8:54 AM

How to compare numbers in a string variable?

I have a powershell script that is grabbing the output of a website and storing it into a string variable. What I would like to do is check a line in the output which contains two numbers - the number of emails sent out of the total number of emails.
I have not come up with a way to do this that works. I was thinking of maybe using a regex, but there are other numbers I don't care about that keep getting caught.
Here is a sample of what is contained in the string variable:
Email ID: 46862270 : Succeded. Time Taken: 00:00:00.0924511
Email ID: 46862272 : Succeded. Time Taken: 00:00:00.0493887
-- Sent 250 of 250 emails successfully. Total Dispatch Time: 00:00:08.1406995
--State Written to DB. Time Taken for DB Write: 00:00:00.4611053
Here is another sample:
Email ID: 46865840 : Succeded. Time Taken: 00:00:00.9333887
-- Sent 17 of 17 emails successfully. Total Dispatch Time: 00:00:01.2416905
--State Written to DB. Time Taken for DB Write: 00:00:00.0402957
So if I have the above contained in a variable called $httpResponse how can I find only the line that starts with -- Sent
and then subtract the first number from the second number?
So for example if I have this:
Email ID: 46865840 : Succeded. Time Taken: 00:00:00.9333887
-- Sent 207 of 217 emails successfully. Total Dispatch Time: 00:00:01.2416905
--State Written to DB. Time Taken for DB Write: 00:00:00.0402957
I would want the check to return 10. Is this even possible?
Any help is appreciated!

Sure.
$String = @'
Email ID: 46865840 : Succeded. Time Taken: 00:00:00.9333887
-- Sent 207 of 217 emails successfully. Total Dispatch Time: 00:00:01.2416905
--State Written to DB. Time Taken for DB Write: 00:00:00.0402957
if ( $string -match 'Sent (\d+) of (\d+) emails .+' )
{ $FailedEmailCount = [int]$matches[2] - $matches[1] }
$FailedEmailCount
10
Each set of parens will designate a capture group, and those can be referenced from $Matches after a successful -match.
Just remember that they will all be strings, and to do a math operation you have to cast at least the one on the LH side to a numeric type first.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

How to find a string inside another String variable

Hi,
I need to find whether a string is available in a String of varying length.
i.e., i want to know string "access" is available in a String variable( may have values like "microsoft access 2000 bla bla bla .." or "bla bla access microsoft").
so, i dont know the starting point of the word 'access' in the String variable.
Pls help me in doing this.
Thanks in advance,
Rao

Check the API documentation for this method:
"int indexOf(String str)
Returns the index within this string of the first occurrence of the specified substring."

Escape single quote from a String variable

Hi,
I have a String variable called "name" which i am using in my form tag.
<form name=test action="test.jsp?fname=<%=name%>" method="post">
But i am getting Javascript error if the "name" variable contains a string with some special characters like single quote( ' ).
Plz help me to escape this special char from my String variable.
Thanks..

You need to url-encode the value using the URLEncoder class.
http://java.sun.com/javase/6/docs/api/java/net/URLEncoder.html
For example:
<form name=test action="test.jsp?fname=<%=URLEncoder.encode(name, "ISO-8859-1")%>" method="post">

How to load a text file (ASCII) into a TS string variable?

I need to load a ASCII file into a TS string variable for subsequent processing. I tried the SecuenceBuilder DLL (in the examples directory) but it seems that this DLL has a bug. Some text files are not loaded properly. I have also tried the kernel32 functions (openfile, createfile, readfile ... ) handling them as a C program, but with no success. The property loader feature of TS is not the suitable solution for me, because I would have to modify all my text files to include some specific fields (step name, variables, starmarker ...). Doy you know an alternative procedure to load text files or any DLL that implements what I look for ? Any help would be grateful. Cesar ([email protected])

Hi Cesar,
I don't know if you have found a solution, but attached is a DLL built in VC that will read the text out of a file into a TestStand variable. The attached sequence file \SequenceFile1.seq contains a step type that is set to call the DLL responsible for reading the file. It reads the file specified under Step.FilePath and stores the data in Step.ReadData. Please let me know if this works for you. I have attached the source as well.
Regards,
Bob
Attachments:
ReadFile.zip ‏3628 KB

How do I pass single quotes into a string variable?

Thanks for any help?
Example
Select xdat, yday
from foo
where
xdat = to_char(sysdate, 'mm/dd/yyyy')
How do I pass the single quoted stuff above into a string variable?

Thank you but that is not the same thing. I am building a dynamic sql statement and need to pass the quoted material into a statement that is quoted Is that not what my example above shows?
My example above has a quoted string inside a string. I think this is exactly what you were asking for.

How to execute code saved in string variable??

Hello experts,
I need to execute a select which I obtain concatenating several fields into string variable.
So the select is saved in a string:
var = 'select... from ... where...'.
There is any way to execute that select? ("exec var." or similar??)
thanks

Hello Illie
Would it not be possible to use a simple dynamic SELECT, e.g.:
DATA:
ldo_data TYPE REF TO data.
FIELD-SYMBOLS:
<lt_itab> TYPE TABLE.
CREATE DATA ldo_data TYPE TABLE OF (ld_tabname).
ASSIGN ldo_data->* TO <lt_itab>.
SELECT * from (ld_tabname) INTO TABLE <lt_itab>
WHERE (ld_clause_string).
Regards
Uwe

How to store serval char variables into a string variable?

I have serval char variables, but i don't know how to put them together (without using arrays). I am thinking to store these char variables into a string variable but i don't know how to do it. For example,
char letter1 = 'a', letter2 = 'b', letter3 = 'c';
String letters;
then how can i do to make letters = "abc" from using letter1,2,3?
I am just a beginner of Java, if anyone can help me, i will appreciate that very much!!!

String letters=""+leter1+letter2+letter3;is fine and dandy. What it actually compiles to is
String letters = new StringBuffer().append(letter1).append(letter2).append(letter3).toString();Which ofcourse is much more code to write, but still good to know.
So do see the API for java.lang.StringBuffer.
Heikki

Could not determine value for variable 0P_FVAEX (or 0P_CTPCA)

I get the below error while accessing a query on the planning Info Cube. I used the SAP Exit variable Most Current Data (Transactional InfoCube) (0S_RQTRA) in the query for the Characteristic - Request ID (0REQUID) to extract the data from the yellow request too.
I do not use the below variables as in the below eror in my query at all. Please assist.
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.

Hello,
you need to take a closer look at your query. Somewhere you used one of the 0P_* exit variables, which work only for controlling related InfoCubes. Use your own variables.
Regards,
Marc
SAP NetWeaver RIG

How i pass table column value to string variable or return to java applete

Hi Master,
How do I pass a table column value into string variable. See my code below:
import java.sql.*;
public class Waheed {
public Waheed() {
public static void main (String args [])
String s = "9 23 45.4 56.7";
System.out.println ("going for connection");
// DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn =
DriverManager.getConnection("jdbc:oracle:thin:@fahim:1521:aamir","muhammad","mfa786");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select accid from accbal");
System.out.println ("going for connection");
while (rset.next())
s= rset.getString("accid"); this line give me error
System.out.println (rset.getString("accid"));
System.out.println (s);
catch(Exception e){
e.printStackTrace();
This line give me an error:
s= rset.getString("accid");
s is string variable
Plese give me an idea how I can pass accid in s variable.
Thanks.
Aamir

See the code sample in the following thread (try using upeercase).
JDBC connection
Kuassi

Doubt about a null value assigned to a String variable

Hi,
I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one:
public static void main(String[] args) {
        String total = null;
        System.out.println(total);
        total = total+"one";
        System.out.println(total);
}the doubt comes when i see the output, the output i get is this:
null
nulloneA variable with null value means it does not contains a reference to an object in memory, so the question is why the null is printed when i concatenate the total variable which has a null value with the string "one".
Is the null value converted to string ??
Please clarify
Regards and thanks!
Carlos

null is a keyword to inform compiler that the reference contain nothingNo. 'null' is not a keyword, it is a literal. Beyond that the compiler doesn't care. It has a runtime value as well.
total contains null value means it does not have memory,No, it means it refers to nothing, as opposed to referring to an object.
for representation purpose it contain "null"No. println(String) has special behaviour if the argument is null. This is documented and has already been described above. Your handwaving about 'for representation purpose' is meaningless. The compiler and the JVM don't know the purpose of the code.
e.g. this keyword shows a hash value instead of memory addressNo it doesn't: it depends entirely on the actual class of the object referred to by 'this', and specifically what its toString() method does.
similarly "total" maps null as a literal.Completely meaningless. "total" doesn't 'map' anything, it is just a literal. The behaviour you describe is a property of the string concatenation operator, not of string literals.
I hope you can understand this.Nobody could understand it. It is compete nonsense. The correct answer has already been given. Please read the thread before you contribute.

Convert String variable value to an Object referece type

Hi all,
I want to know that if there any possible way to convert String variable value to a Object reference type in java. I'll explain by example if this is not clear.
Let's think that there is a string variable name like,
String name="HelloWorld";
and there is a class name same to the variable value.
class HelloWorld
I am passing this string variable value to a method which is going to make a object of helloworld;
new convertobj().convert("HelloWorld");
class convertobj{
public void convert(String name){
// in hert it is going to create the object of HelloWorld;
// HelloWorld hello=new HelloWorld(); just like this.
now i want to do this from the name variable value.( name na=new name()) like wise.
please let me know if there any possible way to do that.
I am just passing the name of class by string variable then i wanted to make a instance of the class which come through the variable value.
thanx.

Either cast the object to a HelloWorld or use the reflection API (Google it) - with the reflection API you can discover what methods are available.
Note: if you are planning to pass in various string arguments and instantiate a class which you expect to have a certain method... you should define an interface and have all of your classes that you will call in this way implement the interface (that way you're sure the class has a method of that name). You can then just cast the object to the interface type and call the method.
John

Determination of String variable weight

Similar Messages

Maybe you are looking for