Determine if insertion point for tag is valid

How do you determine if the user's current position in the document is a valid insertion point for a <video> tag? Is there a built-in function? Thanks.

Hi
The only validation you can do is to check the dom structure of the document and try and determine if it is valid from this.
PZ

Similar Messages

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

Placing Insertion Point for Images

Virtually all of the instructions for inserting images in
Dreamweaver tell you to first "place the insertion point in the
document where you want the image." How can I (Move) that is place
the cursor at a particular place on the blank page without using
carriage returns, tabs, etc that add unnecessary code.
Thank you for your assistance on what must be a trivial
matter for those more experienced than I

You cannot. You must build an HTML infrastructure that allows
your
insertion point to be placed where you want it on the page.
For example, if you want an image to be placed 100px down
from the top of
the page, and 100px to the right of the left margin, you
could do that by
building an HTML table with a cell that falls at exactly that
point. Then
you would just drop the image into that cell.
See - web authoring is not like using Microsoft Word, or a DT
Publishing
application. Unfortunately, you need to have some
understanding of the
underlying HTML/CSS to begin to work efficiently.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Intlcom" <[email protected]> wrote in
message
news:f2l2p7$7hh$[email protected]..
> Virtually all of the instructions for inserting images
in Dreamweaver tell
> you
> to first "place the insertion point in the document
where you want the
> image."
> How can I (Move) that is place the cursor at a
particular place on the
> blank
> page without using carriage returns, tabs, etc that add
unnecessary code.
>
> Thank you for your assistance on what must be a trivial
matter for those
> more
> experienced than I
>

Insertion points for comments

Hi all
Is there any possibility to find out the insertion points of a comment(i.e ) in an indesign file? I need to draw an anchord frame near by the comment.
Thanks in advance

Good afternoon skylerssmith,
The Miele vent hood you purchased from one of our in-store Pacific Sales stores should be eligible for points, as long as it was not applied to a promotional financing offer and was not purchased in AZ, CA, or NV. It can usually take between 20 to 35 days for points from an eligible Pacific Sales or Magnolia purchase to post to a member's My Best Buy™ account, which would start after any scheduled deliveries have been completed. The return/exchange period for a member with Elite Plus status is 45 days.
I would like to see about potentially adding your Pacific Sales purchase to your My Best Buy™ account, but I will need some additional information from you first. To gather the information that I need, I will be sending you a private message. You can check your private messages by logging into the forum and clicking on the little yellow envelope at the top of the page.
My Best Buy™ - Program Terms
I hope that you have a wonderful day, and thank you for being a My Best Buy™ member.

Installing Oracle RAC problem: Could not determine /tmp mount point

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folks understand how to determine the mount point for directory /tmp ?
Thanks.

Folks,
Hello. I have found the file ./bash_profile under /home/ora11g/ and the file is invisible. However, I edit the file using the command:
[ora11g@Rac2 ~]$ vi /home/ora11g/.bash_profile
I add the 2 lines into the file as below:
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
I save the file .bash_profile and reboot Oracle Linux 5.6 and check again on step 7 of 10 in the Installer, but the problem is still not solved.
Can any folk help to solve the strange problem "could not determine mount point for /tmp" ?
Thanks.

Is it possible to move the anchor point for an inline object?

I have noticed that sometimes the anchor point will get inserted in the middle of a word resulting in the spellchecker marking the word as misspelled.
I can't seem to find any information in the documentation about moving an anchor point. Is it not possible?
Thanks

Krisler,
Select your Inline graphic. Then click on the center of the graphic and drag the mouse's pointer into the text. When you get your pointer into the text you will see the insertion cursor (vertical bar) just at the tip of the mouse arrow. When you let go of the mouse button the insertion point for the graphic will be where the insertion bar was at that time. The key point is to concentrate on the position of your arrow tip as you attempt to reposition the insertion point.
Jerry

Validation error for tag cfloop

Hi All,
Complete newbie to CF here. I've inherited (or bought) an online business which has its site written in CF. I haven't done this sort of stuff before but do work SQL for a living and object oriented stuff plus have done a bit of html and php so CF isn't mind blowing to me (in its simple form).
I've downloaded my site on to my computer to run a local copy that I can hack to pieces if needs be. For some reason, I have a few problems with the site running locally. The first error I'm getting is a Attribute validation error for tag cfloop.
Basically, index.cfm has this bit of code in it:
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
    <cfinvokeargument name="storedProcedure" value="usp_GetFeaturedWineries">
</cfinvoke>
Ok, easy enough. Anyway, there's a call down the page to:
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
Within displayFeaturedWineries.cfm is the code that calls the stored proc invoked above:
<cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Bam, that's where the error occurs. "The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.
What??? The stored proc exists and it only returns two records (which begs me to wonder why you would have startrow and endrow but anyway, it doesn't work with or without it).
The other interesting thing is that this works on production, NO PROBLEM!!! WTF? How can it work on production but not locally.
The only thing I'm starting to think is:
a) I've missed a setting somewhere in CF or
b) I'm running Apache as compared to IIS or
c) I'm running SQL 2008 and CF 9 which will no doubt be different to the production host server.
Should B or C be causing THAT type of problem??
Thanks,
Matt

I'm not sure what code apart from the above is going to show you what you could possibly need to solve this, but here goes. The following is only snippets of the code, but they are the relavant snippets. Other stored procs work. The cfdump for getFeaturedWineries_qry shows 'usp_getFeaturedWineries'. I know its there because I've been unable to run "EXEC usp_getFeaturedWineries" after copying it straight out of the code. As previously stated, there are other stored procs which are running fine.
datasets.cfc
    <cffunction name="storedProcedure">
        <cfargument name="storedProcedure" required="Yes" type="string">
        <cfstoredproc procedure = "#ARGUMENTS.storedProcedure#"
                      datasource = "#REQUEST.DSN_NAME#"
                      username   = "#REQUEST.DSN_USER#"
                      password   = "#REQUEST.DSN_PASS#"
                      returncode = "Yes">
            <cfprocresult name="storedProcedure" resultset="1">
        </cfstoredproc>
        <cfreturn storedProcedure>
    </cffunction>
application.cfm
    
    <cfset DSN_NAME = "boutiqueWineriesTest">
    <cfset DSN_USER = "coldfusion">
    <cfset DSN_PASS = "coldfusion">
index.cfm
<cfobject component="#COMP_REF#.datasets" name="datasets">
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
    <cfinvokeargument name="storedProcedure" value="usp_getFeaturedWineries">
</cfinvoke>
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
displayFeaturedWineries.cfm
         <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Attribute validation error for tag cfloop.
The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.                                                                                  The error occurred in C:\apps\iishome\includes\displayFeaturedWineries.cfm: line 33
Called from C:\apps\iishome\index.cfm: line 399
Called from C:\apps\iishome\index.cfm: line 79
Called from C:\apps\iishome\index.cfm: line 1
31 :      <tr>
32 :           <td width="626" colspan="3" class="productCenter_bg2">
33 :          <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
34 :              <div class="productCennews">
35 :                  <table border="0" cellspacing="0" cellpadding="0">

I am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error

i am getting error "Office for Mac has determined that your product key is not valid." when opening xlsx doc.Till yesterday i was not geting this error and was working perfectly fine with my sheet.

Could be some Disk Corruption, but...
http://support.microsoft.com/kb/969064

How do I let Apple know they need to include an option for controlling the insertion point cursor in system preferences?

As described above.
I have spent far too much time investigating this issue! All I would like to do is have the insertion point cursor (the 'I' shaped text thing) not dissapear when navigating text in a word document with the arrow keys.
Some forums say it's an apllication issue, i.e. microsoft, others say you used to be able to do it in older versions of mac os'.
This isn't a problem for Mac programmes. Obviously it is an issue when Microsoft programmes cross over to Mac. If the computer was a PC then I could customise the blinking rate, turn it on or off etc under the control panel options. With a Mac running MS Office I have not got this option.
So how do I go about telling Apple of my displeasure? So hopefully for future editions of OS or Office for Mac this very minor but completely infuriating problem gets ironed out?
Cheers x

Thank you Ralph n Kurt, very quick off the mark boys, well done
Just checking in to inform you that today, after putting up with the issue for over a year, it has sorted itself out, MIRACLE! I don't know how but I've got a fully trackable insertion point when I navigate with my arrow keys!!
Do you think it's the big-wigs (because I complained to both Mac n MS) tweaking my computer behind the secenes? and if so which one would've done it? My money's on the geniusii.
Either way I am well chuffed and thanks again!
x

Insertion point thickness--help for the visually impaired

I experience difficulty in seeing the blinking 'insertion point' bar or carat.
I have increased the size of the cursor and I beam using the preference panel controls. I can see these clearly.
It would help if I could make the 'insertion point' thicker and increase the rate of blink. (I know its height is fixed by the point size of the font used).
I have looked at the Mighty Mouse software which allows you to customise cursors but not the 'insertion point'.
Grateful for help, advice, or guidance as to a way of solving this problem.
Many thanks
B:o)

Malcolm,
Thank you for your speedy reply.
Much appreciated. Have looked at these products and they look great. Sadly they don't appear to address the 'insertion bar' point that I'm seeking to solve.
Even so thank you for responding to my cry for help.
Best wishes
B:o)

LabVIEW DSC Logging too Many Data Points for Integer Tags

Hi,
I am having a strange problem with LabVIEW 2013 SP1 DSC data logging, running on XP SP3.
All the integer Data Type Tags in my Tag Database that are set to data log, are logging way too much data. When I look at the amount of logged data points for these int16 in Historical view I see its logging a point nearly every second. See screen shots below or attached jpeg's of screen shots of trace view and Trace Props of one of the integer Tags. I would prefer the integer tags to only log on change like the boolean tags.
These tags are being acquired from a Horner OCS over Modbus Serial RTU. The Modbus comms is set-up to poll once a second.
The problematic Tag Data Type in DSC logging are Int16
The Modbus register data items denotations I am using for Int16 is S4#####
Example 'OCS_Modbus_Master\S403709'
The same register represented in OCS Register is shown as '%R0709'
The trace properties for some of these int16 tags is showing database page numbers in the thousands, which compared to the largest floating point tag is currently showing 172 pages after several months of logging.
I would have expected int16 tags to only log a value when the value changes and since the 'update deadband' tag setting is disabled for integer tag properties there is no way to config the tag to only log on changes. What is the default logging config for integers. Log everything or log on any change?
I would prefer for these integer tags to only log on change, since they change infrequently, log on change would be much more data efficient.
I tried changing the tag data type to floating point and gave it an update deadband value to try and see if that would reduce the amount of logged data, it didn't seem to make any difference.
Not sure if the issue lies in the
> Modbus Comms
> The DSC data event tracking module
> The DSC Data Logging module
> Some kind of Horner OSC data type mismatch which results in DSC polling seeing the acquired value as having changed on every poll.
Any suggestions greatly appreciated
Thanks
Paul
Attachments:
Integer Tag Data Points Trace View.jpg ‏125 KB
Integer Tags Data Points Tag Properties.jpg ‏42 KB

This definitely sounds like a citadel/logos issue. There are two possibilities:
1) corrupt database
2) corrupt logos
To see if it is a corrupt database, simply go to your database folder and move all the files out of that folder to a different folder. Then restart the application. Your application will create a clean database. This may solve the problem. If so, then you know it is a corrupt database.
To upgrade/reinstall logos, go to the Control Panel -> Add/Remove Programs. If you see logos there, uninstall it. After uninstalling it, install the most recent logos version (found at ftp://ftp.ni.com/support/lookout/logos).
Please let me know if the problem persists. As you know, you may also always call in to the Tech Support Line.
Thanks.

Need help... Context validation error for tag cfscript.

Code:
    <cffunction name="computeHash" access="public" returntype="String">
      <cfargument name="password" type="string" />
      <cfargument name="salt" type="string" />
      <cfargument name="iterations" type="numeric" required="false" default="1024" />
      <cfargument name="algorithm" type="string" required="false" default="SHA512" />
      <cfscript>
        var hashed = '';
        var i = 1;
        hashed = hash( password & salt, arguments.algorithm, 'UTF-8' );
        for (i = 1; i <= iterations; i++) {
          hashed = hash( hashed & salt, arguments.algorithm, 'UTF-8' );
        return hashed;
      </cfscript>
    </cffunction>
Error on web app:
Context validation error for tag cfscript.
The start tag must have a matching end tag. An explicit end tag can be provided by adding </cfscript>. If the body of the tag is empty you can use the shortcut <cfscript .../>. The CFML compiler was processing:
a cfscript tag beginning on line 11, column 12.
a cfscript tag beginning on line 11, column 12.
The error occurred in xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\salty.cfc: line 11
9 :        <cfargument name="iterations" type="numeric" required="false" default="1024" />
10 :        <cfargument name="algorithm" type="string" required="false" default="SHA512" />
11 :        <cfscript>
12 :           var hashed = '';
13 :           var i = 1;
I am completely lost on why it's fumbling with why it says there's no closing tag. Help!!!!
Thanks

What's on lines 1-7 of that file?
That code compiles fine for me on CF8 & CF9, so that's not where the error is.
You're not trying to compile it on any earlier version of CF than CF8 are you? The < and ++ operators are not valid prior to CF8. CFMX7 might see the < as a stray angle bracket, and get confused. I don't have CFMX7 running here to test the exact error that would produce, sorry.
Adam

Shipping point determination is not happening for CRM sales order in ECC

Hi,
When we create direct sales order in ECC, shipping point determination is happening automatically that means all the relevant settings are properly maintained in ECC for automatic determination of shipping point.
But when we create sales order in CRM and replicate it to ECC, shipping point field is empty even though we use same master data.Hence we are unable to create delivery document.
All the master data (Org structure,Customers,Materials and plants) downloaded from ECC to CRM.
Your help would be highly appreciated.
Thank you.
Regards,
Nagi

Hello Nagi,
Shipping point is determined by the following three factors:
1.shipping condition 2.loading group 3.plant
So please check your customization by the following steps:
1.Use T-code OVX6 to check if you have assigned the plant to your CRM order's sales organization.
2.Shipping condition is usually taken from CRM order directly. Please check whether you have CRM order shipping condition set to the same one as creating ECC order VA01
3.Use T-code SPRO then press F5, go to Logistics Execution Shipping Basic Shipping Functions Shipping Point and Goods Receiving Point Determination Assign Shipping Points to check the shipping point is assigned correctly.
I hope this could be helpful.
Best regards,
Maggie

How do you change size of text cursor or 'insertion point' in adobe cc for mac?

how do you change size of text cursor or 'insertion point' in adobe ID cc for mac? I have looked everywhere. It's possible in Windows and Word but not in Mac. Please help. I spend half my time trying to find that blinking upright bar.

Thanks for your note but it’s still a skinny rod that seems to disappear. Why can’t it become a little thicker so it doesn’t disappear no matter what size I have set the screen? My poor old eyes aren’t what they used to be. I do appreciate your answering and I’ll enlarge the screen so the blankety-blankety blinking rod is at least visible. Nancy
how do you change size of text cursor or 'insertion point' in adobe cc for mac?
created by Peter Spier in InDesign - View the full discussion
Cursor size is governed by the type size and will be be larger or smaller on screen depending on how close you are zoomed in.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6729964#6729964
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Determine Distribution Point For PC Naming

I'm trying to automate the PC Naming process during Windows 7 Deployment with MDT 2010 and SCCM 2012.
I need to add a 3-character site code to the PC name, but I'm not sure how to get it. Ideally, I would like to identify the distribution point used for OSD, and then based on that distribution point, create a custom MDT variable that is the site code,
and later add that custom variable to a string that will be the name.
For example, if a computer was imaged using DP01.mycomapny.local as a distribution point, then MDT customsettings.ini would set the custom variable
SiteCode = HOU and later in the CustomSettings.ini I would have
OSDComputerName = %SiteCode%-%SerialNumber%
My problem is that I don't know how to determine the distribution point from inside customsettings.ini. Any help would be greatly appreciated.

You can use TS Variable "OSDComputerName" for defining new computer name and "_SMSTSSiteCode" for determining Site Code. What are you want to use as SerialNumber?
Vladimir Zelenov | http://systemcenter4all.wordpress.com
Bob - thanks for your reply. I know that OSDComputerName is that variable I want to set. I also know that
SerialNumber is another builtin MDT variable that will pull the machine's serial from the BIOS. I can't use
_SMSTSSiteCode because I need the distribution point name, not the SCCM site code. When I mentioned that I need to add a 3-character site code to the value for OSDComputerName, I didn't mean the SCCM site. The site code I need to
use is an in-house site code for geographic areas. Our SCCM infrastructure has 1 parent site that services multiple geogrpahic areas within a small region, with each geographic area having its own unique company site code. Also, each company site
has a distribution point, not a secondary site server. So, I need to be able to identify the distrubtion point that is handling the OS deployment, not the SCCM site.

Determine if insertion point for tag is valid

Similar Messages

Maybe you are looking for