Determine the immediate child WBS element of a WBS element
Hi,
I would like to know how to determine on how to know all the immediate childs of 1 parent (example: how can i kno all level 3 elements under level 2 b?) The usage of PRPS-STUFE is not enough since it only indicates levels. I also noticed we do not have entries in PRHIS table, is it because of we are not using the standard WBS?
Level 1
Level 2 a
Level 2 b
Level 3 a (of level 2 b)
Level 3 a (of level 2 b)
Level 2 c
Level 3 a (of level 2 c)
Thanks!
Regards,
Vivian
Hi,
The project hierarchy is data is available in PRHI table.
PRHI'S' is for standard structures. S stands for standard.
PRHI is for operative structure.
If you want to know the WBSE immediately under a WBSE say A. Then go to PRHI table enter A in POSNR field. The WBSE under it will be available in PRHI-DOWN field.
If u have more than one WBSEs under A and you are looking to get all of them. Then u may have to rite a Z function module. Logic can be as under.
Assume WBS structure is as below
Level 1 = A
Level 2 = B,C,D.
When u give A as input u want BCD as output.
Then
Take input as 'A'.
1) Go to PRHI and enter A in POSNR. Collect PRHI-DOWN and Store.
2) Again go to PRHI and enter PRHI-DOWN (collected above) in POSNR. Collect PRHI-RIGHT and Store.
3) Again go to PRHI and enter PRHI-RIGHT (Collected above) in POSNR. Colect PRHI-RIGHT and Store.
4) Repeat step 3. untill PRHI-RIGHT = Initial or Zero.
This Function module will give u all the WBSEs assigned in immediate one level less than the input WBSE.
Please post ur findings after u try this.
Thanks
Saikishore Ganga.
Similar Messages
-
How do you determine the index of an element in a cluster?
I've got a small program that I put together, as I'm just trying to get up to speed on Labview. I have a cluster boolean buttons and for some reason the top buttion is coming through as Index 3. There are four buttons in the cluster, but for some reason, there's been a shift. The top one should be Index 0. How do I get things corrected? I can't see how to determine the index of each button through Properties.
Thanks
Solved!
Go to Solution.You can change the order required by just clicking the element by using a unbundle
-
BAPI for finding child WBS elements under a Parent WBS element
Hi friends,
I am working on the transaction ZIOS02 transaction. On releasing the Parent or Main WBS element in ZIOS02 transaction I need to copy some data from ZIOS to PRPS based on WBS element.
I have a Bapi for retrieving all the WBS elements based on Project Definition (BAPI_PROJECT_GETINFO) but i want to know whether is there any BAPI for finding the child WBS elements when we give a Parent WBS elemnts as Input to BAPI.
Could any one please help me in the query ASAP.Hi friends,
I have got the answer for finding the child WBS elements.
In Function module BAPI_Project_get_info.
Use parameter subtree = 'X' and give the WBS element name in tables section under I_wbs_element. You will get all the child WBS elements which are under Main WBS element.
Thanks
Satish Raju -
How to find the Project and wbs Element System Status
Hi all,
How to find the Project and wbs Element System Status.
We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
Regards
RaghavendraHi,
try table <b>jest</b> with key = prps-objnr
Andreas -
Determining the number of elements defined in an enum
Hello,
I have an enum and I want to determine the number of elements (constants) defined in this enum by source code. I know I can use reflection but I just want to know if there's an easier way.
Thank you very much.Hey JavaWisdom,
You can use the ordinal method. I made a simple example to demonstrate.
public class NumberOfEnums {
public static enum Enumeration {
item1, item2, item3, item4
public void count() {
Enumeration[] values = Enumeration.values();
int numElems = 0;
for (Enumeration type : values) {
if (type.ordinal() > numElems) {
numElems = type.ordinal();
// Correct 0 indexed numbering
numElems += 1;
System.out.println("numElems : " + numElems);
public static void main(String args[]) {
NumberOfEnums noe = new NumberOfEnums();
noe.count();
}Cheers,
Cypher -
Locking of the Project and WBS Elements at a single step.
Hi Experts,
My client requirement is to lock the complete project and wbs elements so as not to allow any further postings to the project, I knew that we can lock the project or WBS individually by setting the lock status, but i want to lock the complete project at one step, Is there any possible standard setting to sort out my Issue if not give me the solution.
Thanks & Regards,
RAM.V RAM PRADEEP REDDY wrote:
it is possible to set a lock for Project Definition & WBS Elements at a single shot or not.
>
>
may be the below explanation will be helpful.
You can open the project in CJ20N for example and can set the lock for project definition and also you can set the lock for WBS element without saving and exiting from CJ20N, after setting the lock for both project definition and WBS Element you can save and exit.
It is not possible to select more than one object and set lock with one click. -
How to get the count of repeating elements in a xml doc.
In many xml documents, in is common to have repeating child elements and what I would like to know is how do I determine exactly how many of these child elements exist in a particular document. There is probably a correct XPath string to determine this, but I cannot figure out what it is. Here is an example
<a>
<b>
<c>1</c>
<c>5</c>
<c>22</c>
</b>
</a>
The above 'c' element is what varies in number from document to document and I need to know how to get the number of 'c' elements for the document, which would be 3 in the above case.create table test_xml(data xmltype)
insert into test_xml values(
xmltype('<a>
<b>
<c>1</c>
<c>5</c>
<c>22</c>
</b>
</a>')
select extract(data, '/a/b/c').getclobval() from test_xml
select count(*) from test_xml
where existsnode(data, '/a/b/c')=1
good luck. -
Hello,
In Primavera Integration API there are API's available in com.primavera.integration.client.bo.object.WBS and com.primavera.integration.client.bo.object.Project to load Child WBS.
i.e
loadWBSChildren().
But using Helper classes i.e ProjectHelper and WBSHelper is there a way to load Child WBS(i.e. immediate Child) ?
There is load() API in WBSHelper to which if I pass Bussiness Object as Project, then it loads all WBS and not just immediate WBS.
I want some way in Helper classes through which I can load all ChildWBS of Project and Parent WBS.
Please let me know if there is some way
Regards
PriyankaI would use a filter in load().
For example, I have WBS node W3 with an wbs_id of 1001. Then to get all the immediate WBS children, the filter is where parent_wbs_id = 1001.
V/r,
Gene -
Dear All,
I am using free coding mask and want to validation for child WBS element on account assignment tick.
Like for child WBS element ,Account assignment should be tick otherwise system sould throw an error .kindly note that we are using free coding mask so that in project hierarchy is not defined .it can be 4,5,9,10 anything .
How can I create the validation for this condition .
Regards
RSSIf you are planning to have the check at specific child level WBS, then you can set using level as already suggested by Nitin. So you can say that if level > or = 2 always chk the account assignment.
If you want to set it at specific level then define it for that levels i.e. if level =3 or level =4 or level = 7 or level = 9 then chk account assignment.
You need to have some logic, for setting validation.
Sarang -
I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR -
We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
The operation failed because:
Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
Active Directory Domain Controller \\V-Svr03.mydomain.local.
The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
Testing server: Default-First-Site\DC1-DEV-OFC
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=hookemup,DC=local
......................... DC1-DEV-OFC failed test NCSecDesc
In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.Ok... I ran repadmin /showreps /v again and it shows no errors
C:\>repadmin /showreps /v
Default-First-Site\DC1-DEV-OFC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
==== INBOUND NEIGHBORS ======================================
CN=Configuration,DC=mydomain,DC=local
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 16381490/OU, 16381490/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114817/OU, 114817/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 66047/OU, 66047/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 8098197/OU, 8098197/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
CN=Schema,CN=Configuration,DC=mydomain,DC=local
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 8097482/OU, 8097482/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 65239/OU, 65239/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114149/OU, 114149/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 16381373/OU, 16381373/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
DC=ForestDnsZones,DC=mydomain,DC=local
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 66295/OU, 66295/PU
Last attempt @ 2012-10-29 13:57:48 was successful.
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 8098367/OU, 8098367/PU
Last attempt @ 2012-10-29 13:58:13 was successful.
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 115032/OU, 115032/PU
Last attempt @ 2012-10-29 13:58:25 was successful.
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 16381653/OU, 16381653/PU
Last attempt @ 2012-10-29 13:58:34 was successful.
DC=mySUBdomain,DC=local
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114871/OU, 114871/PU
Last attempt @ 2012-10-29 13:54:02 was successful.
DC=DomainDnsZones,DC=mySUBdomain,DC=local
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
USNs: 114017/OU, 114017/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
DC=mydomain,DC=local
Default-First-Site\V-SVR03 via RPC
DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 114017/OU, 114017/PU
Last attempt @ 2012-10-29 13:52:39 was successful.
Default-First-Site\HESTIA via RPC
DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 16381614/OU, 16381614/PU
Last attempt @ 2012-10-29 13:56:52 was successful.
Default-First-Site\V-SVR01 via RPC
DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 66325/OU, 66325/PU
Last attempt @ 2012-10-29 13:58:34 was successful.
Default-First-Site\ATHENA via RPC
DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
USNs: 8098385/OU, 8098385/PU
Last attempt @ 2012-10-29 13:58:38 was successful. -
How to determine the ROWNUM in a Master Detail Form
Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
ErickHello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM -
A problem determining the JNDI Name of a local EJB with WL 8.1
Hi,
I created a very simple local EJB and deployed it with Weblogic8.1. When I test
it in the Weblogic server admin page, I got the following message:
"The EJB MyLocal has not been tested successfully. There was a problem determining
the JNDI Name of the given bean."
Can anyone help figure out the problem?
Thanks
HenryDoes the ejb have a target server specified?
Does the Ejb have a Jndi binding as specified in the <local-jndi-name></local-jndi-name>
element of weblogic-ejb-jar.xml?
thanks,
Deepak
"Henry" <[email protected]> wrote:
>
>
Hi,
I created a very simple local EJB and deployed it with Weblogic8.1. When
I test
it in the Weblogic server admin page, I got the following message:
"The EJB MyLocal has not been tested successfully. There was a problem
determining
the JNDI Name of the given bean."
Can anyone help figure out the problem?
Thanks
Henry -
How to add an issue if you are a responsible manager of a child wbs ?
How to add an issue if you are a responsible manager of a child wbs ? I have some projects with lots of child WBS and these child WBS is managed by others project managers (or others responsible managers), different responsible manager from the project. I'd like the others responsible managers could add/edit/delete issues in their WBS's. How to do that ?
Hi Yves
try to type at the end of your query the following
select cardcode,cardname,balance from ocrd
for browse
and execute it again
Edited by: Fasolis Vasilios on Nov 30, 2011 12:10 PM -
I need to get the tagName after a node of the first child of the Root
Hi All,
I need to get the TagName of the Node immediete after the Root. I won't know what is the TagName, and based on the Tagname only I can process the records.
For example I might receive a SALES object or a MARKETING object wrapped under the root.
eg.
<PARENT>
<SALES>
</SALES>
</PARENT>
or
<PARENT>
<MARKETING>
</MARKETING>
</PARENT>
I tried to using like this
DocumentBuilder documentBuilder = documentBuilderFactory.newDocumentBuilder();
File file = new File("c:/example.xml");
document = documentBuilder.parse(file);
Node node = document.getDocumentElement().getFirstChild();
System.out.println("node Name:" +node.getNodeName());
System.out.println("node Value:" +node.getNodeValue());
It returns only something like #text, but I need the response like 'SALES'.
Can anyone let me know if im missing something somewhere.
thanks in advance,
HarishThat's because the first child of the document element is that whitespace text node between <PARENT> and <SALES>. You need to scan through the children of the document element until you find one that is an Element node.
Maybe you are looking for
-
Linx Flash Player crashes on SharedObject.flush
The attached code will cause Flash Player to crash if you click the "Save" button, but not if you click the "Save 2" button. The only difference between the two is that in Save 2 ,the identifier used in the shared object cannot be interpreted as an i
-
MacBook won't start up, can't get to desktop
My MacBook 2.16 Intel Core Duo running 10.5.6 will no longer start up. All I get is the Apple logo with the spinning gearwheel, and that's as far as it gets. The wheel spins forever, so I just have to shut the computer off. If I put the 10.5 installe
-
Graphic Design w/ 13.3" Mac Pro??????
I am about to start Graphic Design school and the Mac Pro that they issue seems a little 'small' for a graphic design program. Can I get some opinions. Especially from GD users. I will be using the following software: Software: · Adobe Master
-
Question on saving html page into excel
hi all, i have one problem. Is there any ways that i can save a html page into excel??? that is to save the data displayed on the html page into excel spreadsheet. thanks for your advice.
-
Hi, my Stat_data.dbf constantly grows. If I which delete in the database, remains the same the size stat_dba.dbf. As I know the database in such a way defragmentieren that stat_dba.dbf becomes smaller also.