Developed a report to list out all shipments that are yet to deliver.

hi,
    what about shipment report.how to devolop this report.which tabls and fields we have to used for this report. give me some example for this report.

Hi
The shipment Tcode is VT01N cretae   VT02N /VT03N change and display
VTTK and VTTP are the tables
but these doesn't contain the details of Delivery
So you have delivery number (VBELN) in VTTP table
So link that VBELN(delivery) field to delivery tables LIKP and LIPS and get the delivery details and use the Item no's of shipment and delivery to get the data
So by using the above tables you will get the entire data
if needed goto VBFA table which displays the complete document flow
Reward points if useful
Regards
Anji

Similar Messages

  • Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state in SCOM 2012

    Hello Team,
    We are monitoring 1000 servers in our environment and out of 1000 servers, we have approximately 100 servers showing as critical state on the server state view.
    We can get the critical servers list from SCOM console, but we are not able to get the information about the component responsible for the server to be critical. Using Health explorer to find the root cause for 100 servers is really impossible and time consuming.
    Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state?
    Advance thanks for your help.
    Regards,
    Dinesh
    Thanks & Regards, Dinesh

    Hi,
    As far as I know alerts with severity as criticla may cause windows computer in a critical state, we can try below code to find all critical alerts：
    get-alert -criteria 'ResolutionState=0 AND Severity=2' | select Name,ResolutionState,TimeRaised | export-csv c:\Alerts.txt
    Criteria Syntax http://msdn.microsoft.com/en-us/library/bb437603.aspx
    Values to use.
    Resolution State 
    Severity Values for Alerts
    0       =   New
    0 = INFORMATIONAL
    255   =   Closed
    1 = WARNING
    2 = CRITICAL
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • How do I generate a list of all VIs that are in a TestStand (3.1) sequence?

    Can TestStand (3.1) generate a list of all the VIs that are included in the sequence?  I have a folder structure full of VIs and I know that not all are being used.  I'd like to identify the unused VIs.

    I hope there is no direct method to get the list of VI's, I will always try the following method
    This is the fairly easy way to get the list of VI's used in the Sequence
     Invoke ' Edit -> Sequence File Properties ' and in the  Load Option set  ' Preload When Opening Sequence File ' , after setting this property close and  open the corresponding Sequence file
    When the Sequence File is opened, all the VI's will be loaded in the Memory, so the below code in LabVIEW will list all the VI's in memory
    There is always other complicated Method, you have use the Teststand ActiveX to read all the Steps in the Sequence FIle and Get the Step names which has the LabVIEW Adapter.
    I am using TS 4.2.1, hope above mentioned options are in the TS 3.1
    AshwiN,

  • Report to find out all the unused components in package

    Hi experts
    I have a reqment for report where in
    the selection screeen has got one field package name .
    This package can contain any r3 objects (like tables , Function modules, Function groups, Dictionary objects , classes etc)
    The report shud list out all the objects which are not used any where ( ie empty result from whereused list )
    Is there any Func Module or Class methods to do the above?
    Thanks
    Kallu

    You can see them in SM37 of course but tables TBTCO and TBTCP cointain the info you're looking for
    Regards
    Juan

  • Monthly report listing out ALL open PO

    Hi,
    As our management requested, we need a monthly report listing out ALL open PO for CDG, APR   Someone tell me to input cost centre but it is time consuming to input it as we have over 100 cost centers.  Do you know if I can input SPG/profit center or other data to run this report instead ?  Please advise the transaction code and how to perform it, such as need to know the profit center #, organization code etc
    Thanks
    Raja

    hi
    go to ME2N
    then select Scope of list  ALV
    Selection parameters  as           WE101     Open goods receipt   (select as per ur need )
    then execute u will get the list for open po
    now if u want it to specify the  profit center then go to ME2N and select dynamic selecion  (shift +F4)
    now u will get a smaal scrren , in purchaseing doc item selct profit center
    now u can see the profit center selection field ,give a proper profit center and follow the process as given above
    hope it help
    regards
    kunal

  • Is there any report in SCCM 2012 to list out all the physcial machine and all the virtual machine?

    Is there any report in SCCM 2012 to list out all the physcial machine and all the
    virtual machine?
    and list all VMs for each physical server.

    Hi,
    there is no such builtin report but you can easily crete one as all information is in the database.
    http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?

    Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?  Or do I have to click each one and write down the image name by hand?
    Thanks!
    LJ

    Alternatively use a browser:
    Use the Firefox Web Developer Toolbar
    https://addons.mozilla.org/en-US/firefox/addon/60
    Images > View Image Information
    or the List All Images Add On for Firefox
    https://addons.mozilla.org/en-US/firefox/addon/3688
    or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report

  • Help needed on listing out all tag names using XML Rules in ExtendScript(InDesign)

    Given a document with elements already in place, I am looking for a snippet of code to walk down the XML tree only two levels
    deep to printout the names of each of the tags (not attributes).  I am just using javascript in extendscipt to accomplish this.  Ultimately,
    I want to provide this list in a checkbox dialog and use those checked items to develop a TOC.  This latter part, I have in place.
    It is just the pushing of the tag element names into an array that seems to be cumbersome for me at this point.
    Any shortcut snippets out there that someone can provide?
    A shorter version of this request....Is there anyway to just list out all element.markupTag.name of an XML tree, not knowing the xpath naming?
    Using "//*" obviously is not working....

    well..
    Document.xmlTags.everyItem().name will get you a array of all the xml tags in the document. Maby that will help you?
    another way, and you can use it recursively:
    myObject.xmlElements.everyItem().markupTag.name
    will get you an array of tag names. use something like: http://stackoverflow.com/a/15806501 to remove duplicates.. and.. enjoy

  • List out all on hold POs

    Hi Expert,
    Can you please guide me how to list out all on hold POs? What is the transaction code i can use? How to do it?
    Thanks/Regards,

    Use the Report ME2N,
    Go to Dynamic Selection,
    List down the Folder: Purchasing Document Header, Select the field: Incomplete
    Put the X in Incomplete field and run the report. It will give the POs which are on HOLD.
    Regards
    Vikrant Hande

  • Do we have any standard T Code to list out all deleted Handling Units?

    Hi,
    Do we have any standard T Code to list out all deleted Handling Units?
    Thanks
    Krish

    Hi,
    Please find the below link :
    http://www.scribd.com/doc/3262778/SAP-HU-T-CODE
    Regards
    Sreedhar Reddy

  • An EUL query to list out All the Columns  (Fileds) for each Workbook

    Hi,
    I'm using Discoverer 10.1.2.2 on an Oracle 9.2.0.6.
    Does anyone have the EUL query that lists out all the names of Workbook/Worksheets and the names of their fields/columns. I would greatly appreciate it.
    Thanks

    Hi
    While it is not possible to read the workbook itself, whenever Discoverer runs a worksheet so long as you have enabled the gathering of statistics then a row is written to the EUL5_QPP_STATS table. In that table the column called DOC_NAME is the workbook, the column called DOC_DETAILS is the worksheet, with the CREATED_DATE being the date the worksheet was run. There are other encrypted columns in that table that contain the EUL items that were queried.
    Look at this code:
    SELECT
    QS.QS_DOC_OWNER    USER_NAME,
    QS.QS_DOC_NAME     WORKBOOK,
    QS.QS_DOC_DETAILS  WORKSHEET,
    TRUNC(QS.QS_CREATED_DATE) DOC_DATE,
    *(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 ITEMS,*
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),1,  6)) ITEM1,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),10, 6)) ITEM2,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),19, 6)) ITEM3,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),28, 6)) ITEM4,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),37, 6)) ITEM5,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),46, 6)) ITEM6,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),55, 6)) ITEM7,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),64, 6)) ITEM8,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),73, 6)) ITEM9,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),82, 6)) ITEM10,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),91, 6)) ITEM11,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),100,6)) ITEM12,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),109,6)) ITEM13,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),118,6)) ITEM14,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),127,6)) ITEM15,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),136,6)) ITEM16,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),145,6)) ITEM17,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),154,6)) ITEM18,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),163,6)) ITEM19,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),172,6)) ITEM20
    FROM
    EUL5_QPP_STATS QS--,
    --   APPS.FND_USER          USR
    WHERE
    --   QS.QS_DOC_OWNER = '#' || USR.USER_ID AND
    *(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 < 21*
    AND QS.QS_CREATED_DATE > '01-JAN-2009';
    In order to run this you must have run the EUL5.SQL when connected as the owner of the EUL. This script can be found in the $ORACLE_HOME\Discoverer\Util folder of the machine where the Discoverer Administrator tool is installed.
    Try it out for yourself and you will see how it works.
    Best wishes
    Michael

  • List out all completed PO

    Hi experts,
    May i know how to list out all completed PO? Means The PO has fully delivered and invoiced.
    Thanks.

    Check ME80FN...here you can choose Yes against Delivery completed from the dynamic selection...in the output choose Purchase order history so that you can get both MIGO & MIRO number.
    Regards,
    Indranil

  • How to list all calendars that are shared to a specific user?

    Hi,
    Using Exchange Management Shell/Powershell, I want to list all calendars that are shared to a specific user 'myuser'. 
    I have tried different approaches; list all calendars for all users and then figure out which ones are shared to 'myuser', list all mailboxfolders for 'myuser' with path 'calendar' and sort out the shared ones, ... No luck so far.
    Anybody?
    babu

    Hi
    If you try this command:
    Get-MailboxPermission MyUser

  • My screen continually freezes up.  I've tried closing all apps that are openfreezby double clicking on the home button and closing them. I have held down on the home button and start button simultaneously and it still freezes. Can someone out the help me?

    MY screen continually freezes up. I've tried closing all apps that are open and have held down the home button and start button simultaneously but neither helped. Can someone out there help me?

    Well the next couple of things to try would be to reset all settings, and if that doesn't help, it's probably time to restore the iOS software.
    Settings>General>Reset>Reset all settings. That will take all settings on the iPad back to factory defaults. It will not delete anything and you will not lose any data, but you will have to enter all settings again ...WiFi passwords, enable Siri, select your wallpaper, adjust brightness, turn on location services and set privacy settings, etc, etc.
    You can read about restoring the software here.
    iTunes: Restoring iOS software - Support - Apple
    Should you decide to restore the iOS, it is extremely important that you back up first so that you can restore from the backup and then sync with iTunes afterward in order to restore all content back to the iPad. It is all covered in the kb article.
    If you do not sync with iTunes, then I assume that you backup with iCloud. In that case you can erase the device in Settings>General>Reset>Erase all content and settings. Once again, backing up with I loud is I,operative before you do this so that you can restore from the iCloud backup after you erase the iPad and start over again with activation.
    You should read this first before you restore from either backup.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    This is a must read before you erase the iPad should you decide to go that route.
    iOS: Understanding 'Erase All Content and Settings' - Support - Apple

  • How to make a query to list out Journal voucher that hasn't been posted

    Hi, do you know how to make a query to list out Journal voucher that hasn't been posted?
    By what code name identify that?
    Thanks.
    Raymond
    Edited by: Rui Pereira on Aug 6, 2008 3:57 PM

    jack,
    there is no link with OBTD to OJDT and JDT1.
    voucher number in obdt is different,
    after posting voucher is saved as journal entry seperate
    number is generated.
    you can link OACT,OCRD WITH OJDT,JDT1.
    Jeyakanthan

Maybe you are looking for