Developer Application Provisioning Issues -- Only one app at a time?

_The upshot:_
You can have one and only one developer provision and developer application on the iPhone at a time otherwise you get installation errors (i.e. 0xe8000001).
_To fix:_
Use Xcode Organizer to ensure that you have one and only one application and provision installed to the iPhone that uses your developer certificate.
_To any Apple people:_
If I am wrong about any of this, please let me know. I have wasted 3-4 days over the past 2 weeks due to these issues, and any explanation would be well received! Having one and only one application and provision installed to the iPhone fixed the 0xe8000001 issues for me.
_Long winded explanation:_
It turns out that I am working on multiple iPhone applications at the same time.
Each application has a different AppID (as registered on the iPhone Developer Portal).
I have spent quite a bit of time having major issues with Developer Provisioning and application installation from within Xcode and Xcode Organizer, which led me to not be able to debug my application on a live iPhone.
I finally discovered my problem: I can only have one app and one provision on the iPhone that uses the same developer certificate.
When swapping between Xcode projects if I remove all provisions and applications using Organizer and re-add only the provision of the application I am working on, then the install errors at build time go away.
Samples of install errors that manifest themselves using the 0xe8000001 code:
Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: entitlement 'application-identifier' has value not permitted by provisioning profile
Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: verify_executable: Could not validate signature: e8008016
-- Taken from the Xcode Organizer Console window for my development iPhone --
These errors seem to be occurring because of an install time check against the installed provision files to verify the app, and it seems the provision from an already installed application is being used.
This is probably occurring because the main developer certificate has to be the same between the 2 applications. As the scan through the provisions is occurring, the certificate of the new app matches the certificate from the already installed app, and the provision check fails due to different App IDs.
There is one and only one developer certificate allowed per iPhone Standard program.
I hope that this helps some other people out there with their development provisioning and debug / installation errors.
--Batgar

This is why you should create a wildcard developer certificate (com.youcompany.*)...follow the directions in the program portal. Then you can then install all your apps on your phone.

Similar Messages

Is there a way to have an iPad run only 1 app at a time?

I am a tech support person and teachers are asking me if we can have a students iPad run only one app at a time. For instance, a group of students in biology would be allowed to run only the app for their biology book.
Students have gotten so distracted during classtime with iMessage, web browsing, videos and games that it becomes virtually impossible to keep them on task in the classroom.
I am aware of adding profiles to the devices, but this profile would only be for the biology class. It would then have to be removed or deactivated upon leaving the class.

You can restrict iPads running iOS 6 to a single app via Guided Access:
http://support.apple.com/kb/HT5509
but that requires reconfiguration of the iPads whenever you want to set it up or deactivate or change it. There may be a mobile device management (MDM) system that would allow you to push out such changes "on the fly" but I can't say with certainty. Someone else here or in the iPad in the Enterprise forum may know.
Otherwise it may be necessary to implement an administrative solution such as banning use of iPads in class or enforcing consequences should a student be using the iPad for inappropriate functions.
Regards.

Why is my macbook pro running slow. It runs slow even if only one app is open, especially if it's a browser. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)

Hi. This is my first time posting. My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem. It runs slow even if only one app is open, especially if it's a browser, particulary google chrome. If mail is open...forget about it, down to a crawl. I don't know how to read Etrecheck, but was hoping someone who does can help me out. Would be super grateful. :-)
P.S. - Also, it sounds like something is loose inside my mac. How should I proceed?
Thanks in advance.
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
Disk Information:
          APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Problem System Launch Daemons:
          [failed] com.apple.wdhelper.plist
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.seagate.SeagateStorageGauge.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] org.chromium.chromoting.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
User Login Items:
          Activity Monitor
          Dropbox
          Google Drive
          younity
          EvernoteHelper
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.2.4.18058 Support
          nplastpass: Version: 2.5.5 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.2.4.18058 Support
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
          Slick Savings: Version: 1.0
          Slick Savings: Version: 1.0
          Surfon: Version: 1.2.2
          Pearltrees Extension: Version: 6.0.13
          Mindomo Bookmarks: Version: 1.0
          Ebay Shopping Assistant: Version: 1.1
          Zootool: Version: 0.7
          Amazon Shopping Assistant: Version: 1.1
          Pocket: Version: 1.7.1
          Searchme: Version: 1.3
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
User Internet Plug-ins:
          Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes:
          remoting_host_prefpane Support
          Flash Player Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Mobile backups: ON
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
          Destinations:
                    NO NAME [Local] (Last used)
                    Total size: 3.41 GB
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 3.41 GB < (Disk used 136.06 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Activity Monitor
               5%          WindowServer
               1%          InterCheck
               1%          sysmond
               0%          ocspd
Top Processes by Memory:
          152 MB          Finder
          115 MB          HelpViewer
          111 MB          mds_stores
          86 MB          InterCheck
          57 MB          WindowServer
Virtual Memory Information:
          983 MB          Free RAM
          1.03 GB          Active RAM
          584 MB          Inactive RAM
          1.01 GB          Wired RAM
          17.41 GB          Page-ins
          222 MB          Page-outs

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Transfer purchases only transfers one app at a time

I'm trying to back up my iPad in preparation for installing the new iOS, I'm transferring purchases first, but iTunes only transfers one app each time I click transfer purchases! This never used to happen, any idea how to stop it doing this, how do I transfer all the apps at once?
Also, when I sync my iPad or iPhone, iTunes frequently moves the apps around on the screen of the iPhone/iPad, taking them out of folders etc, and re-installs ones I've deleted from the iPhone/iPad. How do I get it to stop doing this? I just want it to back up whatever is on the iPhone/iPad, not change it in any way.

My iPhone4 and iPad2 are both doing this same thing (only transferring one app at a time). It is really frustrating because I purchase a lot of apps from my phone or ipad and it takes forever to keep clicking 'transfer purchases' over and over again for each individual app every time that I sync or update. It would be great if someone could figure out how I could enable it so that all of the apps transfer to the computer at once.
Regarding the second part of your post, I've had that same problem before. When doing a sync, after backing up my iPhone/iPad, the apps are updated, and when the screen comes back all or most of the folders are missing and I have more apps than can fit in the display. Or sometimes it happens after upgrading the software or restoring it. After reading other posts about the same thing, I've found that doing a restore from your latest backup will usually restore all of your folders, too. The trick is that you might have to do the restore twice. Try to restore your phone from a backup and when it comes back, if the folders are still missing, do the restore one more time. I don't know why doing it the second time works, but it has worked for me on 3 separate occasions when nothing else would. I know that it is a pain to have to waste the time of doing an entire restore (especially if you have to do it twice), but it is less work than having to remember and recreate your folders from scratch.
Message was edited by: bigdaddylongluv
Message was edited by: bigdaddylongluv

How to set role which can issue only one command

I am thinking about setting role, which will be allowed to issue olny one command. I have created role test. Which has the following entries in the following files:
/etc/user_attr
test::::profiles=OneCommand;type=role
/etc/security/exec_attr
OneCommand:solaris:cmd:::/tmp/data.sh:euid=0
After this I sill could issue all comands, not only test command /tmp/data.sh.
When I issued comand profiles on test role I received the following:
bash-3.00$ profiles test
OneCommand
Basic Solaris User
All
So I commented line in the /etc/policy.conf to read:
#PROFS_GRANTED=Basic Solaris User
After that, when I try to issue /tmp/data.sh command as a test role I receive the following error:
$ /tmp/data.sh
pfexec: Exec format error
Does anybody know how to set up the role which can issue only one command ? Maybe there is a way to do this in the way which wil not affect another roles (ie, not to touch /etc/policy.conf).
Best regards

RadekW wrote:
I am thinking about setting role, which will be allowed to issue olny one command. I have created role test. Which has the following entries in the following files:They will need the ability to run at least a profile shell otherwise all bets are off. So now you're down to two commands. :-)
bash-3.00$ profiles test
OneCommand
Basic Solaris User
AllFirst you need to define what already exists by default. (policy.conf)
Then you get to change those defaults or create a new default list just for test.
Then you get to add a role or profile for test that allows the execution of a profile shell and one command.
Then you should test all of the user accounts to ensure that something didn't break. This step might be a little overkill.
alan

There is only one app at "USE CELLULAR DARA FOR:" field

How can I make other apps to appear at "USE CELLULAR DATA FOR:" field?
There is only one app "Passbook" is on that list and I cannot use Cellular data for other apps at all.

Hi sberman,
Thank you for your answer.
Restrictions is currently off.
Anyway I found that my SIM card is not working on 3G.
I replaced my SIM to other one and it works fine even without apps on the "USE CELLULAR DATA FOR:" field.
Still don't know how to add apps on this field.

SCAN LISTENER runs from only one node at a time from /etc/hosts !

Dear all ,
Recently I have to configure RAC in oracle 11g(r2) in AIX 6.1 . Since in this moment it is not possible to configure DNS, so I dont use SCAN ip into the DNS/GNS, I just add the SCAN ip into the host file like :
cat /etc/hosts
SCAN 172.17.0.22
Got the info from : http://www.freeoraclehelp.com/2011/12/scan-setup-for-oracle-11g-release211gr2.html#ORACLE11GR2RACINS
After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
now when I relocate it from node 2 using
"srvctl relocate scan -i 1-n DCDBSVR2" , then the output shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2
Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
srvctl relocate scan -i 2 -n DCDBSVR2
resource ora.scan2.vip does not exists
Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?
Here is my listener file (which is in the GRID home location) configuration :
Listener File OF NODE1 AND NODE 2:
==================================
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON
LISTENER_SCAN1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)
ADR_BASE_LISTENER_SCAN1 = /U01/APP/ORACLE
2)
Another issue , when I give the command : " ifconfig -a " , then it shows the SCAN ip either node1 or node2 . suppose if the SCAN ip is in the node1 , and then if I run the "relocate" command from node2 , the ip goes to the Node 2 . is it a correct situation ? advice plz ... ...
thx in advance .. ...
Edited by: shipon_97 on Jan 10, 2012 7:22 AM
Edited by: shipon_97 on Jan 10, 2012 7:31 AM

After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :If I am not wrong and after looking at the document you sent, you will be able to use only once scan in case you use /etc/host file and this will be up on only one node where you added this scan entry in /etc/hosts file.
Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?Probably you can't in your case, you might run only one i think and on one node only
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
now when I relocate it from node 2 using
"srvctl relocate scan -i 1 -n DCDBSVR2" , then the output shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2You moved scan listener from node 1 to node 2, OK
Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
srvctl relocate scan -i 2 -n DCDBSVR2
resource ora.scan2.vip does not exists
--------------------------------------------------------------------------------Since you have only one scan, you can't relocate "2". So ise "1" instead here also
FYI
http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
Salman

How do i get my ipod touch to download more than one app at a time, can i make it toware i dont have to wait for one app to download before it starts downloading another,

my ipod will only download one app at a time and runs extremely slow. i was wondering if there is some way that i can make it download more than one app at a time and how can i make the app start downloading again after i have left my wi-fi zone and then went back in. im really confused.

Download everything on your computer in iTunes, then sync your iPod to iTunes.
You should be syncing (backing up) to iTunes and your photo app regurally, anyway.

IPhone installs one app at a time, why?

I have an iPhone 4S and an iPad 2. Both are running iOS 6.1.3. For the longest time, the way my iPhone and iPad install or upgrade apps has differed.
For my iPad, the install/update process for multiple installs/updates works like this:
1. Download first app
2. Start installing the app and simultaneously start downloading next app.
For my iPhone, the process works like this:
1. Download app.
2. Install app.
3. Once install is finished, download next app.
In other words, my iPad will download an app without waiting for the prior one to finish installing, while my iPhone downloads and installs one app at a time. Because of this it takes longer to update apps on my iPhone than on my iPad. This is case over both cellular and Wifi.
I'm assuming the way the iPad is working is the correct method. Why doesn't my iPhone work the same way?

Whil you can run two apps at the same time, i.e. Music and Safari, you can only see one app at a time.

I am trying to reorganise my apps on my iphone via the new itunes software, you don't seem to be able to move one app at a time to a different screen, just move the screens around, what am I doing wrong

I am trying to reorganise my apps on my iphone via the new itunes software, you don't seem to be able to move one app at a time to a different screen, just move the screens around, what am I doing wrong

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

Concurrent program to be submitted y only one user at a time

Hi
I have an issue with one of my reports. The report is using temporary tables, those will under go insertion and deletion while the report is running. So, to make sure that two or more concurrent requests submitted for same report, will not conflict, I want to make my concurrent request to be submitted by only one user at a time.
How can I do that?
Any help is appreciated.
Thanks
BalaKrishna

The "run alone" box should not be checked. This indicates that this program can only run when no others are running. Pl see MOS Doc 1078462.6 (Custom SQL Concurrent Program Returns NO MANAGER Error). This option should typically not be used.
To be able to achieve what you need, set the incompatibility (as you have done) and then bounce the concurrent managers for the setting to take effect. Pl see these MOS Docs
436186.1 - Cannot Make Concurrent Programs Incompatible With Itself
142944.1 - How to Make a Concurrent Program Incompatible with Itself
HTH
Srini

Return only one record at a time

I am new to crystal reports so any help would be appreciated. I have a .net app that is a order processing system. When the user is in a record, they want to be able to click on a button an open a crystal report showing only that orders details. I created a crystal report that has the following fields:
Order ID, Product ID, Unit Price, Sell Price, Hours.
The Order ID is the primary key in the database. The report runs fine when clicking the report button in the app, but returns the details for every order in the database. We just need the details of the order that the user is processing. How do I setup the report to only show that order's details? I am using VB 2005 and Crystal v9.
Edited by: sking on Mar 6, 2009 1:12 AM

Brian,
Thank you for all your help. I have been able to setup the report to return only one record at a time. In my app, when I click the report button the PDF opens perfectly with only one record. However, when I go to another record and open the PDF it returns the information from the record id that was set as the default parameter value (crReportDocument.SetParameterValue("Orders", 67). How do I get it to return the report for a different record? Here is the code I'm using. I think I'm really close with your suggestions but I'm just missing one step.
#Region "CrystalReport"
     ''' <summary>
     '''Override the CrystalReportButton_Click and call DisplayReportAsPDF_CrystalReportButton function
     ''' </summary>
     Public Sub CrystalReportButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
      Dim crReportDocument As CrystalDecisions.CrystalReports.Engine.ReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument
      Dim fileName As String = "test.rpt"
      Try
          If fileName.Substring(1).StartsWith(":\") Then
          crReportDocument.Load(fileName)
      Else
          crReportDocument.Load(Me.Page.MapPath(fileName))
      End If
      Catch ex As Exception
          Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
          errMsg += " Please make sure the dlls for Crystal Report are compatible with the Crystal Report file."
          BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
      End Try
      Try
Dim paramValue As CrystalDecisions.Shared.ParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue()
           paramValue.Value = "67"
           crReportDocument.SetParameterValue("Orders", 67)
DisplayReportAsPDF_CrystalReportButton(crReportDocument)
      Catch ex As Exception
          Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
          errMsg += " If this is a deployment machine, make sure network service has permissions to read or write to the windows\temp folder."
          BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
      End Try

How to configure my MDB serve only one message at a time?

Hi All,
I have requirement where I need to develope a MDB iin weblogic. This MDB has to serve only one message at a time. If the send second message is sent while the first one is running the second message has to sit in queue and start processing once the first message is finished.
Is there any way to configure via annotations or in weblogic server settings ?
Any help would be really appreciated...
Thank you,
K.

Here is my client code to send the message
Connection connection = null;
javax.jms.Session session = null;
MessageProducer producer = null;
try
connection = lpConnectionFactory.createConnection();
session = connection.createSession(false, javax.jms.Session.AUTO_ACKNOWLEDGE);
// Create a MessageProducer from the Session to the Validation Queue
producer = session.createProducer(myQueue);
((WLMessageProducer)producer).setUnitOfOrder();
// Create a message
ObjectMessage message = session.createObjectMessage();
message.setObject(params);
message.setStringProperty(MyServiceConstants.OPERATION, operation);
// Send the message to the queue
producer.send(message);
finally
if (producer != null)
producer.close();
if (session != null)
session.close();
if (connection != null)
connection.close();
Following is the weblogic-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
"-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN"
"http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>TestMDB</ejb-name>
<message-driven-descriptor>
     <pool>
          <max-beans-in-free-pool>1</max-beans-in-free-pool>
          <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
     </pool>
</message-driven-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>

How to configure my JMS QUEUE serve only one message at a time?

Hi All,
I have requirement where I need to develope a JMS QUEUE in weblogic. This MDB has to serve only one message at a time. Is there any way to configure via annotations or in weblogic server settings ?
Any help would be really appreciated...
Thank you,
K.

I'm not aware of any way to configure the max pool size via annotations, you might try posting to the EJB newsgroup (please post back the answer). Of course you can set the size via an EJB descriptor, as per the MDB chapter of the Performance and Tuning guide in the edocs.
By the way, if you have ordered message processing requirements, I highly recommend taking a look at the WebLogic JMS "Unit-of-Order" (UOO) feature as per the UOO chapter of the JMS programmer's guide. For a variety of reasons, the UOO features is often, by far, the best option for handling such requirements. If this feature applies to your use case, then there would be no need to force single threaded message processing in some sort of manual fashion (the feature enforces this for you).
Tom

Some apps stay open when trying to close more than one app at a time in ios 7

I tried closing down 2 or 3 app at a time in IOS7 and there's always one or two that stay open. The icon at the bottom is still there but I've already swiped it up to close it. When I go out of the closing function and come back I see that they are still open and I need to close them again. I tried this on many ipads, iPhones and ipod touch and they all act the same way.
Chris

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

Developer Application Provisioning Issues -- Only one app at a time?

Similar Messages

Maybe you are looking for