Cropping not maintained from Bridge to PS when batch processing

This is the oddest thing, because it has never happened before. I am sending images that are cropped in Bridge to a Photoshop batch process (just image resize and sharpening), but they are showing up in the new folder un-cropped.
Anybody seen this before?

Perhaps the "then click [Done]" part is being omitted? It's easy to forget and click [Cancel], which will toss out the crop and any other settings changes.
Other possibilities:
If you've set Camera Raw to use SideCar XMP files to maintain the settings, make sure you're not moving just the raw files to some other location without the XMP files.
If you've set Camera Raw to use the central database, make sure you're opening the images on the same computer on which you set the crop, and also make sure you've given the Camera Raw database enough room to grow (I've found that the default 1 GB is not nearly enough).
-Noel

Similar Messages

Fiscal year variant Z1 is not maintained for calendar year 2012 when loadin

Dear Experts,
We are working on BI7.0 extracting data from ECC 6.0.
I am trying to load data from 0HR_PY_PP_1 which is a Self DataSource in our BW System (extracts data from 0EMPLOYEE and 0PERSON) to load into ZPA_C50 which is a copy of BCT InfoCube 0PAPA_C02 (Headcount).
The data has come through into the PSA very well.
However, DTP is throwing an error while loading 32242 records of data from PSA into ZPA_C50 InfoCube. The error details as below:
Error while updating to target ZPA_C50 (type INFOCUBE)
Fiscal year variant Z1 is not maintained for calendar year 2012 FGV 2
Messages for 1 data records saved; request is red acc. to configuration
Processing Terminated
We are actually doing a Re-implementation of BW 3.0b in BI 7.0 Ehp1. We have imported Maintenance of Fiscal Year Variant from the BW 3.0b Production System. So this shouldn't be a problem I guess since I have also checked the setting in SPRO in BI 7.0 Development (New) System and they are looking good.
Also, when I do a Filter on 0CALDAY in DTP from 01.01.1900 to 31.12.2010, the loads are working fine. I want the load to run without any Filters on 0CALDAY.
Has anyone been in similar situation. How did you resolve this issue? Your time is very much appreciated.
Thanks in advance.
Chandu

Dear Experts
Thanks for your time.
We have resolved this issue ourselves. We have maintained 'Shortened Fiscal Years' for 'Z1' and it is working fine now. Steps are as below:
In BI Dev System -> SPRO -> SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Intelligence -> General BI Settings -> Maintain fiscal year variant -> Select 'Z1' Fiscal Year Variant and then DoubleClick on 'Shortened Fiscal Years' to set the Fisc Year Variant -> Save.
The dataload should work fine now.
Cheers,
Chandu

Moving from Bridge to Lightroom, when adding existing files on hard drive, will metadata transfer? Should I choose embed sidecar in file handling or will it automatically happen if I choose standard?

Moving from Bridge to Lightroom. Will metadata in existing files be recognized by Lightroom, and should I select embed+sidecar when adding files to library for the first time.

Thanks guys, appreciate the feedback.
CHRIS - you are exactly right about my FUTURE workflow. What I'm trying to figure out now is how to best handle images already processed. My import should be OK based on the way I have duplicates in separate directories, BUT I'm wondering how to avoid seeing all of these duplicates in LR when I search by keyword, etc.? I guess I can somehow flag the RAW files and only get them in my results.
One question though - Stacks, etc. sounds great for the LR processed images. But what about variations based on processing in Photoshop after the LR Develop stage? I guess in this case I will just have to keep duplicate images if I have multiple versions from my PS work?
ISAAC - Thanks for clarifying that LR will recognize my XMP files from Bridge. What about the opposite direction . . . if I edit something in LR and capture this via XMP, it won't prohibit Bridge from recognizing XMP info if I access a file via Bridge, will it?
ALSO - Do you know where I can find info about tracking via XMP vs. the central database? You mentioned a couple of valid points, but I'm not sure I have a full handle on the pros/cons of these options.
Thanks!
Mark

Latest Camera RAW not working from Bridge

Just update Camera RAW today. Tried to open a NEF file from Bridge to the new Camera RAW and nothing happens. Just get a warning tone. Attempted to open the Camera RAW preferences in Bridge. Window does not open.
The only way to open Camera RAW is to launch the NEF file into Photoshop.
Rebooted my MacBook Pro. Ran Disk Utility to repair permissions. Didn't help.
So is this version of Camera RAW flawed?

Excellent! Thanks ssprengel!

Dr Brown's 1-2-3 not working from Bridge

I am having problems with PS CS5 everytime I try to use the Dr Brown's 1-2-3 script for resizing images from Bridge. I get the message
"Sorry something major has happened and I can't continue! Would you like to see more info"
If I hit yes I get a page starting with message
Error: Bad argument : Invalid resource format. Error in line 15, at character offset 1284, in '{ orientation: 'column', alignChildren: 'fill', spacing: 5, etc etc
Has anyone else had this problem and found a solution? The only way I can get the script to work is to close PS and start again from Bridge
Thanks

If you are saving as JPEG with "Remove preview and metadata for reduced file size" then the resolution is stripped, as the script is using "Save For Web"

Watermarks not showing on files when batch processed?

Hello,
I am using acrobat pro 9. I am looking to watermark upto 2000 files at work, I have researched and gone through all of the steps to set up a watermarking script for the batch function.
However once the process is complete, the correct files appear in the correct folder but are totally unchaged...the watermarkings are set to be veiwable on screen and when printed.
I can watermark and successfully save files if I do them one at a time, it just all goes out the window when I try to batch them.
I am batching 3D imaged pdf's if that makes any difference (doubt it would as they watermark the same as 2d)
used this link to help create the watermark
http://www.pdfzone.com/c/a/Document-Management/Add-Watermarks-to-PDFs-with-Batch-Processin g/
Can anyone think why I am having this trouble? Is there a simple option I am not selecting etc?
Thanks
Ali.

Ok here is how I have created the batch wateramark:
Advanced > Document Processing > Batch Processing
NEW sequence > input name (3D wateramark)
Select Commands: Add x2 'Add watermark'
This is how I set up the first watermark;
Then the second;
Now watermarks are in place ,select '3D watermark' and 'run sequence'
Edit the options....
The files are then selected > OK.
Loading bar appears, and the process appears to run.
Files then appear in the correct specified folder but are not watermarked.
Thanks.

Please Help, Issues when batch processing Multi Frame images in Fireworks

I hope someone will know how to do this and tell me where I am going wrong.
Objective 1
I have a large number of images that all have the exact same number of frames (4) and are all exactly the same size that I want to get resized, cropped and water marked (when I say 'watermarked I mean have my websites logo pasted in a specificlocation on each frame, I have my websites logo as a seperate .png file which I copy from).
Current Process
I create a command which will crop the image then paste my companys url/log onto the first frame, move it to the correct location on the frame then copy it again and then paste it onto each of the other frames, the command then resizes the image tot he exact proportions I want.
I start a batch process and use my command, making sure that I also export from the .png to animated gif (and I edit the settings to make it 256 animated gif).
Error 1
The process described above resizes and crops my images however it does NOT put the watermark in the correct place, it seems to put it int he right place on the first frame and then in a different place on all the followingn frames thus giving the effect of the watermark jumping around. Which is obviously NOT what I want.
Question 1
Please let me know what process I should be following to correct the Error 1 above.
Objective & Question 2
I want to do exactly the same thing as shown above but this time the files have a varying number of frames (from 2 to 45 frames (or instances as CS4 seems to call them)). Is there a way to paste my logo to the to the exact same location on ALL frames?
Other information
I have tried WHXY Paste extension and I can not see how to use that to solve the issue. I have also tried 'Paste in Place' however I can not see how to use the Paste In Place extension as it is not appering in my list of commands.
Many thanks in advance for your help.
Andy

Andy, you could start a batch process which will do most of the things you are asking for. THe batch process can be done using Fireworks. The right way to start is going to Archivo / Procesar por Lotes and then follow all the different option this tool has to offer. Yes, I know I gave you the names in Spanish but that is the way I use Adobe Fireworks.
I hope this was usefull for you!
Best regards,
Frank Meier | Curso Arreglos Florales

Bridge will no longer batch process an old watermarking action that i made it says "place" unavailable in Bridge with cs5, does anyone know why?

I am using cs5 and in Bridge my action that I have used for 2 years all of the sudden says it is unavailable when I try to use the batch process function in Bridge. I have run updates, reset bridge and photoshop and shut the computer down. Please help if you have had this happen to you.

That is a very common error message actions produce when for some reason the document current state does not support the command or feature used in the action step that gets the error. With our seeing a screen capture of the error message and being able to see the document window, the layers palette and the actions palette Its not possible to tell you why the actions is getting that error message. Most likely its because of the document current state. For example place is not valid for a bitmap mode document.

ACR use of workdisk and scratchdisk when batch processing images

I am setting up a new PC optimized for PS, and I and pondering on the optimal disk setup for ACR when I batch process several images:
Alternative 1
2 physical disk in raid 0 with 2 partitions, partition 1 for scratch and the second for images to work on.
The question is if there ever will be a conflict in the sence that PS/ACR wants to access both scratch- and work partitions at the same time? If this should occure, I guess the following is a better setup??:
Alternative 2
1 physical disk for scratch
1 physical disk for images to work on
Christopher

Thank you Ramón,
I am not limited to 2 drives. I am planning on having OS and programs on a third separate disk.
The point of using alternative 1 would be to use RAID 0 to obtain faster read/write (both for scratch and for reading and saving images on the work partition. However, if scratch usage competes with read/write to the work partition, I'm probably better off with alternative 2. If I work on one image this is simple, however I frequently batch process several RAW images. How does ACR/PS handle this? If all the images initially are read from the work partition and loaded into RAM + scratch and processed there, there will be no competition between the two partitions and I will benefit from the RAID solution. However, if the images are read one or just a few at a time, processed in RAM/scratch and then saved to the work partition, I imagine scratch and work partition could be competing for the the disks read/write head when finished images are being saved and ACR is "waiting" for more images to process??

Exif information when batch processing

Hi,
When i do a batch process on some images the program adds extra information like: "Software used".
Can i switch this off? I'm not asking the program to edit my EXIF file, so it shouldn't.
Thanks already.

The "software" fields in the EXIF and XMP metadata are industry-defined fields that let you track which programs have been used to modify your images, in the same way that other fields let you track the camera or scanner and exposure information. Many image-manipulation programs set those fields.
There is no way to turn off the use of those fields in PSE, but you can use a third-party utility such as Exiftool or ExiftoolGUI to clear the fields on a batch of images.

JCO Destinations Not Maintainable from Web Dynpro Content Administrator

I have Netweaver Preview 04s installed. Both SLD and app server are running on the same local machine.
1) I have tested connection to SLD from WD Content Admin OK Message.
2) I have created the two destinations using WD Content admin with
    sucess message that it was created in SLD, but the destinations do not
    appear under maintain JCO Destinations of WD Content Admin after creation.
3) The JCO Destinations are not found in SLD when the wd app is deployed.
4) The JCO Destinations are found under the deployed components within WD
    Content admin but listed as Status Not defined. The create link is enabled but
    trying to re-create the items leads to error that they are already defined in SLD.
5) I have added SLD admin privileges to the Administrator user.
6) The Test, Ping etc are disabled greyed-out on the two destinations. Only create
    is enabled but this leads to the error message that it has already been defined
    in SLD.
7) I have clicked on start assigned SLD and checked status is running.
I don't know how the WD Content Admin can detect the destinations have already been created and yet the destinations do not appear under the Maintain JCO destinations column, nor is it possible to test etc.   I should note that Netweaver Admin indicates that SLD is not accessible. As I indicated, I did check that connection worked from WD Content Admin.

John,
If you have more than one user Id's to login in to the Portal,then try to login with Super Admin role and then check the JCo connections there.
Search for the JCo connections you have created and test them.
Also have you given J2EE host name and SAP logon information correctly or not, do check them once.
regards
Anil Dichpally

Subvi does not stop from the mainVi immediately when the stop button pressed in the mainVi

Hi guys,
I have a mainVi which has a subVi inside. I want to have a kind of emeregency stop button in my mainVi.
when I pressed the button, the program does not stop instantly. it does one loop and then stops.
please help me to solve this problem.
Attached you can find the Main and SubVI
Attachments:
Sample2 MainVI.vi ‏18 KB
Move_MINI Editted SubVI.vi ‏13 KB

This is basic dataflow. Any code is available to run as soon as data is present on all its inputs. No data is present at its outputs until all the code inside has completed.
What this means in your case is that the stop button will likely be read almost instantly when the while loop starts an iteration. It will not be read again until the start of the next iteration. This is why it will usually take an extra iteration to stop. You can either force it to read the stop button after the other code inside the loop completes or use a Producer/Consumer (events) architecture where the stop button will be read in a parallel loop containing an event structure.
It also means that the Move_MINI subVI has no means of responding to any external events (such as the stop button being pressed) after it has started running. All the other subVIs are missing so it is hard to tell what is going on. From the control labels and VI names I suspect that this may be some kind of motion control system. If so it probably takes 100s of milliseconds to seconds or longer to complete a move. To allow an external event to modify the behavior of such a VI, you need a means of communication between the event (stop button) and the VI. A notifier may be an appropriate choice. The VI also needs to be configured in such a manner that it never goes more than about 100 ms without an opportunity to stop. Without knowing more about the subVIs, I cannot say how this might work.
Lynn

Charge Account Is Not Copied From PR to PO When Created From PR to RFQ to Quotation to PO

Hi,
We are using Autocreate functionality (Forms) for creating PO.
Now when we create PO directly from PR, distribution account gets copied correctly from PR, but when when we create PR>>RFQ>>Quotation>>PO , it takes from Inventory org material account.
I want to use the same account from PR to be copied into PO.
Please Advise,
Thanks Nikhil

You may find the following links to be helpful
Incorrect PO Accrual Account when PO is created from a Purchase Requisition (Doc ID 1136853.1)
How to Set Up and Use Category-based Account Default in Purchasing (Doc ID 293046.1)
How To Diagnose Issues In Autocreate (CREATEPO) Workflow (Doc ID 559009.1)

TV Show Not Tranferring From iTunes to iPod When I Try To Sync-Please Help!

Hi, I am sure there is a simple answer to this but I am new to iTunes/iPod so I cannot for the life of me figure out what I am doing wrong despite scanning thru iTunes help and forum topics. So, I purchased an episode of Big Love (I know, like you care), and I have tried multiple times to sync my iPod (3rd gen) but I cannot get the show to appear on my iPod. I have tried both the automatice and manual sync options to no avail. When I hit sync, iTunes says it is syncing but stops after a couple of seconds. If you can help me out I would greatly appreciate it!!

The first of the video capable iPods was the fifth generation 30 GB model that came out in 2005.
The last generation Nano (aka fat Nano), 3rd Gen, was also video capable but that doesn't appear to be what you're referring to.
In case you do have the right iPod but are just confused about which generation try the following :
If you bought the HD version iTunes also downloaded the SD, standard version, as well and that's what you sync to the iPod. Right click on the show and scan down the menu till you get to 'Version'. Click on it and select SD.

TS4083 My folders will not sync from my outlook mail when im on my desk top to my Ipad.

my outlook mail folders do not sync with my ipad

iCloud will only sync mail folders created in the iCloud account.

Cropping not maintained from Bridge to PS when batch processing

Similar Messages

Maybe you are looking for