Developing an Eclipse RCP Plugin Project with CE and NWDI

Hallo,
I want to know what's the best way to create an Eclipse RCP application and have the sources managed by the NWDI.
My problem is that development components within a software component can only be plain java projects and not plugin projects. Now I can convert a plugin project to a development component but when I try to build this dc it fails because the needed libraries for this origin plugin project (Plug-In Dependencies) are not available because is it now just a plain java project.
However I could create another dc with the needed libraries and add this dc as a required dc but then it is not the same as a standard plugin project and I don't know if that could create problems then.
In case anybody knows how to solve this problems, please give me a hint.
Fabian

Hi,
I fixed the java.lang.NoClassDefFoundError problem in the Eclipse 3.1 Plug-in: in the Run > Environment, set the CLASSPATH variable to the directory containing the target program's package hierarchy. Now the Trace program runs ok when invoked from the plug-in.
However, when I repeated the same configuration in Eclipse 3.0.2, I got the following runtime error.
Unhandled event loop exception
Reason:
com/sun/jdi/connect/VMStartException
Isn't Eclipse 3.0.2 supposed to behave in the same way? Any help will be much appreciated!
Sunny

Similar Messages

Extending CR4E using Eclipse RCP plugin's

Hi Sean,I have not started checking this for myself, so this question is more theoretical.I plan to customize and extend CR4E using Eclipse RCP plugin architecture. The two main requirements are to add a custom data-source type/provider to the report wizard, and to add a custom result-set wrapper for the said data-source. Other requiremnets may be more look&feel related.Assuming licensing issues are met, I had a few questions.1. Are there suitable extension points for this in CR4E2. Given your current roadmap, is the api stable.Thanks,Nathaniel

Unfortunately, developing against these extension points is not currently supported. We definitely plan to support building against these extension points in the future, but in the initial release this was just not in the timeframe. The extension points are likely to change in future releases and we didn't want to be bound to the initial definition released in version 1. I will keep you updated when this feature does become available. Regards, Sean Johnson (CR4E Product Manager)

How is the best way to export my project with clips and videos?

I would like to save my project and export the project with clips and videos included. What is the best way to do it?

Can you clarify:
clips and video
Seems as though you want to retain the original media?
Export as a Master File to get a good quality export file of your Timeline.
Al

How to extending CR4E from Eclipse RCP plugin's

Hi All,
I want to create a eclipse RCP application which will extend CR4E and let me create my own wizards for data source customization.
I read it from crystal report for eclipse 2.0 guide that RCP and CR4E support possible but please let me know how ? and is ther any material or sample for this? any where?
Any related information will be highly appreciated.
Regards,
Sunil Kumar Sahoo.
Sr. Software Engg.

Dear Ted,
I want to create one RCp application . which will invoke the custom plugins created by exteding eclipse extension pionts. Is it possiblle to invoke these eclipse plugins inside RCP applications. So that I can invoke my custom eclipse designer having custom data source and few more branding wizards ,inside RCP standalone application?
If yes , Please kindly refer how and which material describes this?
your reply will be hignly appreciated .
Regards,
Sunil Kumar Sahoo

Idvd project with video and slideshow for dvd-rom file access

working on an idvd project with both a video section and photos in a few photo galleries. its' a slightly more complex project, but still only 2gb on a 4gb disc. After we burn (with all dvd-rom contents checked, and advance>edit dvd-rom contents shows photo files all there) the finished disc doesn't have files available in the dvd-romcontents! its' driving us mad as simpler projects are burning properly, with both photo and video files available. Could there be some kind of conflict occurring? does anyone have any ideas?!
17" Desktop G5 Mac OS X (10.4.2)

Steve,
It sounds like Windows Movie Maker Live was used. The regular WMM will Export to DV-AVI Type I, which will Import into PrPro much better.
I would recommend converting the WMA/WMV to DV-AVI, and Importing that into a DV NTSC (if you are in NTSC-land) Project.
Then, you would use Encore to do the DVD authoring. There are several ways to get the material on your Sequence into Encore. ADL (Adobe Dynamic Link) is probably the easiest way to do this.
What is your exact workflow from PrPro, into Encore?
What brand of blank media are you burning the DVD to?
This ARTICLE will give you some tips.
Good luck, and let us know a bit more,
Hunt
PS - Multiplexing is the function of combining the Audio and the Video into one file. There are usually two choices, "None" and then often "DVD." For None, you will get two separate files - one for the Audio and one for the Video. With "DVD" you should get a muxed (combined) file. Actually, the separate Audio and Video is the preferred way, if one is doing an Export from PrPro, and then an Import to Encore. One would Import the Video into Encore as a Timeline, and the Audio as an Asset. In Encore, just drag the Audio file from the Project Panel to the appropriate Timeline, where it will snap into place.

Compile Project with Maven and Crystal Reports dependencies

Hi.
I'd like to build a java project with maven. That project uses Crystal Reports. I have added all Crystal Reports jar files in the folder lib (from the runtime download) to my maven dependencies. But i get always the following error message.
The import com.crystaldecisions.ReportViewer cannot be resolved
in that package is the ReportViewerBean.class an so i get also the following message.
ReportViewerBean cannot be resolved
I tried several different ways with no success.
im looking foreward for your advice.
thanks.
Edited by: hansmeier_de on Aug 25, 2010 11:20 AM

did you list them in the dependencies in your pom file?

Saving projects with Transitions and Titles - iMovie 3

Every time I edit a movie in iMovie 3, add transitions and titles, and then save, the next time I open the project, I get a window saying there are x number of stray clips (my transition and title clips) and would I like to move them to the clip panes or leave them alone. Either way, they end up being out of order. Why will they not stay in the edited order that I put them in, even after I hit Save?

I do Save the projects this way and all the clips show up in the edit panel below the clip frames. BUT, none of the Transition or Title clips stay in the edit panel below. Each time I open the saved project, a message window appears saying that there are x number of stray clips (the Transition and Title Clips). Then it asks me if I would like to leave them alone or put them in the clips pane. If I put them in the clips pane, then I have to once again reposition them where they belong in the edit panel below. This happens every time.

Developing flex apps that use blazeds with flexbuilder and eclipse

Hi all,
Im new to Flex. I'm trying to setup my development environment. What I've noticed is that when blazeds is started and I run a flex project, it creates a folder in the blazeds root folder named $ProjectName-debug (replace $ProjectName with the actual project name). Once this folder is created, and the flash page is accessed, it cannot be deleted until blazeds is actually stopped. The files on that folder seem to be locked. While this folder is locked, eclipse cannot seem to re-build the project (specifically clean). Thus every small change I make to the project, I'm currently having to stop blazeds, clean the flex project, start blazeds, run the flex project.What makes things worse is that I have to start our application along with blazeds so it can retrieve the data from the app (which takes a few minutes).
I'm wondering if other people are having to go through this pain or if they've figured out a way to get around this. I would ideally like to have a way where I'm able to rebuild the project and hit f5 and reload the page and see the changes. I understand this is not possible with debug.
If anyone has figured out a way to incorporate blazeds to their development environment in a more practical way, please let me know. We just switched from tapestry/gwt to flex. We used to be able to update on the go thus development was much simpler.
Regards,
Udam

Hi Udam. I don't seem to have that problem. I'm using the FlashBuilder 4 (formerly FlexBuilder) beta so maybe it is a bug in the version of FlexBuilder you are using, although it could also be something else in your environment.
When I clean the project in FlashBuilder 4 it deletes all the assets from the $ProjectName-debug directory and then rebuilds the project. It doesn't attempt to delete the $ProjectName-debug directory itself.
If you are not using the FlashBuilder 4 beta I would try using that and see if it resolves the problem for you. If that fixes things then you know it is an issue with the version of FlexBuilder you are using.
If that doesn't do it, it could be an issue with the application server you are using or maybe something else in your environment.
If you still have problems after trying this with FlashBuilder 4 please reply back with as much information about your environment as you can such as what application server you are using, what OS you have, what browser you are testing with, if you have FlexBuilder and BlazeDS running on the same machine or separate machines, etc.
Thanks.
-Alex

[Oracle SQL Developer] Vs [Eclipse + Toad plugin]

Hello,
Have anybody tried to develop PL/SQL code in both of them? What is better? How do you find Eclipse?
Best Regards
slkLinuxUser

Don't know if you can trust Barry on this issue as he's part of the sqldev development team ;)
But anyway, everyone has different visions on what an editor should be. You should try them both yourself to know which one suits you.
Have fun,
K.

New Article - RoboHelp projects with Subversion and TortoiseSVN

Some folks have posted questions about Subversion and TortoiseSVN in this forum, so I thought I'd pass along this new article I found in the Adobe Developer Network this week that goes in to detail on how to set up this open-source solution with RoboHelp:
http://www.adobe.com/devnet/robohelp/articles/robohelp_subversion.html
Thanks
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Thread moved to Source Control forum.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

First time editing a project with HD, and then burning it to Blu-ray

Hey there everyone.
*Newbie to HD editing alert.
I have two problems regarding HD editing/export.
I've been scouring the forums for several days, and I can't find a specific answer to what I need/want to know. Some things are understandable to a degree, and then there are things that seem way over my head.
(One thing, I've read about third-party programs like Cineform, and such, and was told that those programs aren't really necessary. So, if there's some way to stay away from them, I'd like your suggestions on that. However, if in the end, that's the way I need to go for this to work, then I guess I will have to go that route).
This is my first attempt at capturing and editing in HDV, so please excuse my ignorance if I refer to something in the wrong context.
My main goal:
To edit an HD wedding, shot with Sony FX-1 HD camera, and burn it to a Blu-ray disk.
Here is the computer system that I'm working with:
Dell Precision M6300; Intel Core 2 Duo T7700; 2.40 GHz 800Mhz; 4MB L2 Cache; Dual Core
Operating System: Windows XP PRO SP3;
- 4.0GB, DDR2-667 SDRAM, 2 DIMM Dell Precision M4300
- NVIDIA QUADRO FX1600M 512MB TurboCache (256 dedicated) Dell Precision M6300
- Hard Drive: 200GB Free Fall Sensor Hard Drive 9.5MM, 7200RPM, Dell Mobile Precision MX300 Factory Install
- 8X DVD+/-RW, Data Only, Dell Precision M6300
- NTFS file system
I have been editing with Premiere Pro CS3 for the past year now.
I used a Sony FX-1 when capturing my footage.
I believe that I captured all the footage in HDV ok. (I made a new project and used the Load Preset of "HDV 1080i30(60i)"; and then captured all the footage thru CS3)
My clip properties (when highlighted in the Project Panel) say that the clip is: an mpeg; and 1440x1080 (1.333).
1. My first problem: I captured 4 clips (Clips 1-3 are 1 hour each; and Clip 4 is 16 mins long). When I place Clip 1 into the timeline . . . the only way I can describe how the audio plays in this clip is . . . the audio looks like it's looping the same 5 to 6 minutes of audio throughout the whole 1 hour clip. (ie: the video is one, long, flowing 1 hour of continuous video; but the audio connected to this same clip, seems to be playing the first 5 mins of the clip, and then repeats it at the 6th minute). You can 'visually' see this problem when you view the audio waveform in the timeline.
The other three clips have no problem with audio at all.
2. My second question is a bit more lengthy:
I wanted to run a test of burning a Blu-Ray of this project's raw footage, to see how the workflow would go after I've edited the wedding.
When I go to Export my timeline to Encore, on the Encoding Settings area, it seems to only let me use the Preset of NTSC Widescreen, with a 720x480 video. I don't see anywhere where it mentions that this project will be HD (which I thought would keep my 1440x1080 dimensions on export).
The Format and Range areas are greyed out; and I can only choose a few things off the Preset dropdown.
Am I missing a step? Or is this what will be exported, but once in Encore, it will be able to burn correctly on Blu-ray?
Again, please excuse my naivety in understanding and/or mis-speaking my problem.
Also on the Export Settings window, on the Output tab - should I check off 'Deinterlace' also? I've read and read about Interlace and Deinterlace, and I am confused as to "what to use when".
So my specific questions are:
1. Regarding the 'repetetive audio loop' on one of my clips - what could the problem be there?
Will it export OK? Or should I just recapture that one clip again?
2A. Do I Export to Encore directly, when I'm done with my timeline and want to go to burn the Blu-ray disk? Or do I need to make my timeline into 'one fluid file'?
2B. If I'm supposed to make a file of the timeline:
Am I supposed to be Exporting to Movie instead?
(When I tried that, my settings under 'Video' showed up as a greyed out area for Frame Size, locked at 720x480 wi

Continuation:
2B. If I'm supposed to make a file of the timeline:
Am I supposed to be Exporting to Movie instead?
(When I tried that, my settings under 'Video' showed up as a greyed out area for Frame Size, locked at 720x480 with a ratio at 4.3. I changed the Pixel Aspect Ratio to "D1/DV NTSC Widescreen 16:9 (1.2)" and the ratio that shows beside the greyed out Frame Rate area does change to 16:9. But the size is still locked at 720x480.
Shouldn't I be seeing 1440x1080 SOMEwhere along the export line? Or at least some sort of ratio that would pertain to HD?
2C. Am I supposed to be Exporting to Adobe Media Encoder?
And if so, should I be choosing:
H.264;
HDTV 1080p 29.97 High Quality;
Output tab having 'Deinterlace' checked;
using VBR, 2 Pass;
leaving Target Bitrate default of 32;
and Maximum Bitrate default of 40?;
and should I be setting the 'Key Frame Distance' at 30 also?
2D. When exporting, should I always Deinterlace footage?
(I've read so much about Deinterlace and Interlace that I'm lost about the 'when to use either' aspect)
3. If I absolutely have to use a third-party program like Cineform, at what point do you use that program? Is this used at the time that you capture the footage, and then import those files into PPCS3? Or is this a program that you use to Export your project when you're done with your editing?
(I read all the information that Dan Isaacs posted about the "Premiere Pro HDV workflow Guide", but that was entirely too confusing to me right now, as a newbie to HDV, etc. I was going to attempt that way, but I ended up doing this post first).
In my meandering throughout the CS3 forum regarding SD, HD, HDV, etc etc, I have picked up alot of information regarding certain problems and situations. I may have all the info in my head, and I'm just applying it wrong; or, I'm missing something in the mix? I'm not sure what it is, but I seem to be having quite a problem doing what seems to be something that should be 'easy'.
I find this forum extremely helpful and understanding, so I'm looking to you all for help. I would appreciate any and all comments and suggestions!
Thanks so much!

Using Lion. Stamped a project with metadata and all the first pictures in a stack are now square when they were not before. Any ideas how to get them back to their original shape?

I created the metadata for a project and lifted the metadata, hit Command A to select over 1000 photos and stamed the entire project. It rated all the pics with 3 stars and made them all square. Clearly not my intent. Can't seem to undo. Any ideas?

Let's start with this: do they all show that they have a Crop adjustment applied?
Are they square in both the Browser and the Viewer?

DVD project with movie and additional files on same disk?

Hi-
Dell 9200 (aka XPS 410), WinXP Pro SP2, Encore 2.0.
I have a DVD project that I am assembling and need to include different types of files on the same DVD. I have an educational movie that is already formatted on a stand-alone DVD (just like one you would rent from Blockbuster). It needs to go onto a DVD along with some additional supporting files in .pdf and .txt file formats. The DVD has to be able to autostart and play on both a home TV/DVD setup as well as a computer. Users also need to be able to access the additional .pdf and .txt files if it is viewed on a computer. Can these two viewing arrangements co-exist on one DVD? Seems to me that it would all work fine if I converted the stand-alone DVD movie into a something like a Quicktime or Windows Media file, created a XHTML file that can be used as an autostart menu, and then link the movie, .pdf and .txt files from there. All of this can then be burned onto one DVD that can be viewed on a computer, but I assume it would NOT be able to be viewed on a TV/DVD home setup. On the other hand, If I created a DVD using Encore I could just make an autostart screen with menu, but I don't think the menu would suppport something like linking to the .pdf and .txt documents (not that they could be viewed on a home TV/DVD setup anyway.
So, am I looking at having to make two separate DVDs--one with the movie and one with the additional .pdf and .txt materials? Would this have to go onto a dual-sided DVD? One side with the movie and one side with the additional materials? Would it be best to just convert the movie and stick all the files on one DVD? (Even though my boss hates this idea because it will reduce the quality of the current DVD movie).
Any suggestions would be greatly appreciated.
-=Scott

eDVD is one option. It uses the Interactual Player to link to your extra content directly from the DVD material. Your other option is just to create your own separate content for use on computers. DVD players only pay attention to the VIDEO_TS folder, which must be in the root directory. If you also have an autorun.inf in the root directory, Windows-based systems will follow the instructions there rather than treating the disc as a DVD-Video disc. So you could use an autorun.inf to launch whatever you want to play on the computer (Director projector, other executable, etc.). You can add that extra stuff to the DVD either by using the "ROM Content" feature in Encore or by building to a folder and then burning your disc with other burning software (be sure to use the UDF filesystem or it won't work in DVD players).
Notes:
1. Mac computers will still launch whatever application is set to handle DVD-Video discs in the System Preferences (usually the Apple DVD player).
2. If computer users need to view the DVD-Video content, you will need to give them some help in doing that. (i.e. instructions to manually launch their software DVD player, linking directly to the DVD-Video content from your Director project, providing a separate copy of the video, etc.)
3. eDVD's effectiveness is diminished by the fact that it requires installation of the Interactual player. If the user is unwilling/unable to install software on their computer, such as many corporate/educational users, they will be unable to take advantage of the eDVD features.

Adobe Flash Plugin Crashing With Browser and Computer Softwares

Windows 8.1 64bit
Chrome 39.0.2171.95
Flash Player 16
I was video chatting when suddenly my flash crashed, now it won't work with anything. Some examples are VLC, Spotify, and Skype, the minute i open these programs they will just become unresponsive. It also does not work on either Chrome or IE (Can't watch youtubes videos or go on certain websites). I have tried uninstalling and doing a clean installation of flash, but that didn't do anything. I have also tried re-installing shockwave, but that did not do anything (I did restart my computer). Does anybody know how to solve this problem?

I did what you asked and it appears to have worked! It has not been crashing to say the least! I will mark as solved create a new one if I experience the problem again. That Guig!

Any AE plugin Xcode sample project with cuda for mac?

Hello everyone,
As suggested by the AE sdk, I start to create my plugin with sample project from the SDK.
However, I can not find an example with CUDA support for mac.
Now I have some troubles to setup an adobe plugin project with CUDA support for mac, as cuda files are compiled by nvcc.
Anybody can tell me where I can find an example to build an AE plugin with CUDA for mac?
Thanks for your help.

For anyone following along, I’ve been able to create a sample project that uses CUDA in Xcode, and will include it in the next PPro SDK. If anyone is interested in getting it sooner, let me know.
The most useful post I saw on this was this single post here:
https://devtalk.nvidia.com/default/topic/386632/cuda-programming-and-performance/integrati on-with-xcode-anyone-created-a-cuda-template-project-/post/2743943/#2743943

Developing an Eclipse RCP Plugin Project with CE and NWDI

Similar Messages

Maybe you are looking for