Developing Hidden Markov Models Acoustic Signature analysis/Classifier on compactRIO

Hi,
Currently working with a project requires classifying engines based on their acoustic signatures, and planning to use Hidden Markov Models. We need to capture multiple channels (8 now) of acoustic data (audio range/16/24Ksps) and use beamforming to localize sources. Then from the incoming stream, recognize the class of engine that currently present on the scene at near realtime speeds, based on the previously learned models. Which is the advisable hardware platform best suitable for the application? CompactRIO/PXI?
Although CompctRIO have an FPGA onboard and rugged, is it capable of acquiring 8 channels of acoustic data, simultaneously doing HMM at realtime? Or is it better to go with PXI platforms?
Have searched a lot on HMMs on LabVIEW, but found nothing relevant.
Any guidelines appreciated

Similar Messages

Need help about Hidden Markov Model model

I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanks

Have you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM

Comparing ABAP development process with Model Driven Architecture concept

My Background
I am a postgraduate student writing a Masters Degree Dissertation titled An Investigation into how compatible ERP Development Process is with Model Driven Development Philosophy: A SAP R/3 Case Study.
The aim of this project is to compare ERP system development process with Model Driven Development (MDD) and to identify whether and how they can be used together. Model Driven Architecture (MDA) is Object Management Groups (OMG) flavour of the MDD philosophy and is the paradigm that will be used here.
I have chosen SAP R/3 as my case study in order to narrow the research and want to explore the development processes/cycle involved in using ABAP/4 to reconfigure/customize SAP R/3 system during implementation.
An overview of the MDA concept according to OMG is given below. Following this, Ive provided some questions that are open to discussions.
Overview of the MDA Concept
The Model Driven Architecture (MDA) is an approach to software systems development that separates the specification of system functionality from the specification of the implementation of the functionality on a specific technology platform. The MDA concept provides an open, vendor-neutral approach to system interoperability.
A recent study by the Middleware Company summarizes MDA paradigm as a development process that makes use of the following steps:
1.     Secure business requirements for an application.
2.     Develop UML diagrams for the domain model, independent of any particular technology (J2EE, Microsoft .NET, CORBA, etc). This UML model represents the core business services and components. This UML model is called Platform Independent Model (PIM) because it is completely technology-independent and will be the same regardless of whether you decided to use J2EE or .NET. You develop this UML model using UML modelling capabilities of an MDA-specific modelling tool.
3.     Build UML diagrams for the application, specific to a particular technology (J2EE, for example). This UML model will have design patterns. This UML model is called Platform Specific Model (PSM). You can build this manually, or you can generate much of it using an MDA tool and hand-tune only pieces of it that require customisation.
4.     Finally, generate the application code using an MDA tool. That is to say, instead of writing the application by hand based on the UML model, you generate the majority of it from the UML diagrams.
To develop an application using MDA, it is necessary to first build a PIM of the application, then transform this, using a standardised mapping into a PSM, and, finally, map the latter into the application code.
A mapping is a set of rules and techniques used to modify one model in order to get another model. In MDA, mappings are used for transforming:
1)     PIM to PIM. This transformation is used when models are enhanced, filtered or specialized during the development lifecycle without needing any platform dependent information. One of the most obvious mappings is the analysis to design models transformation. PIM to PIM mappings, are generally related to model refinement.
2)     PIM to PSM. This transformation is used when the PIM is sufficiently refined to be projected to the execution infrastructure. The projection is based on the platform characteristics. Describing these characteristics should be done using UML description. Going from a logical component model to a commercial existing component model is a kind of PIM to PSM mapping.
3)     PSM to PSM. This transformation is needed for component realization and deployment. PSM to PSM mapping are generally related to platform dependent model refinement.
4)     PSM to PIM. This transformation is required for abstracting models of existing implementations in a particular technology into a platform-independent model. This procedure often resembles a mining process that is hard to be fully automated. It may be supported by tools, though. Ideally, the result of this mapping will match the corresponding PIM to PSM mapping.
Questions/Discussions
1.     What specific stages are involved in development using ABAP/4? (e.g., requirements gathering, analysis, design, coding, etc)
2.     Do these stages fit into any traditional software development lifecycle? (e.g. waterfall model, v-model, etc)
3.     Which of the stages in (1) above best describes the Platform Independent Model (PIM) of the MDA concept above?
4.     Which of the stages in (1) above best describes the Platform Specific Model (PSM) of the MDA concept above?
5.     How does the Accelerated SAP roadmap relate to the MDA concept above?
6.     Assuming theres a change in business requirements of a company that could lead to reconfiguring/customizing the R/3 system, how is this achieved? For instance, if a model has earlier been developed for that particular process, how does the change in the model affect coding/modification?
7.     How is coding achieved with respect to the reconfiguration of the business models or reference models?
8.     Are all coding manually done or are there tools in the ABAP Workbench that enable codes to be generated automatically from the models of the system?
9.     How much time is spent in coding compared to developing business models like EPC models?

I've also read about the SAP Composite Application Framework (CAF).
But it seems that it's only for Java development....

Links for SQL Developer and Data Modeler not working?

Hi folks,
I tried to access the new SQL Developer and Data Modeler links posted in the April 1 message (and on the Oracle site) from a couple of machines with no luck (empty zip files) - is there an update to the links?
Thanks!
Tomo

In Firefox zero length zip. In IE loses connection to downloads.oracle.com.

Same icons for objects in SQL Developer as Data Modeler

Hello,
would it be possible to display the same icons for objects in SQL Developer as Data Modeler?
For example:
- in SQLD a session temporary table has the icon of a table with an X symbol, in Data Modeler it is just a table icon.
- in SQLD a materialized view has the icon of a table with 2 arrows, in data Modeler it is just a table icon.
Joop

Hi Joop,
I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
David

Developing a mathematical model

Hi,
i want to develope a mathematical model with which you can predict the performance of an AS. For this reason I need to know more detailed information about the AS. Does anybody know where I can find such information as internal organization and processes?
Many thanks,
Mahmoud

I think you need to study a lot, And Oralce documentation is best for this.
try this link and search the Oralce application server things.
http://otn.oracle.com
Regards
Mehmood

Getting Error when creating Data Model off OBIEE Analysis

Hi,
Our BI Publisher is integrated with OBIEE. I am developing BI Publisher report from existing obiee analysis. I am getting error when selecting existing analysis for data Set. Following error gets appear when pressing ok after selecting BI analysis
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
I have done some debugging and it seems error is appearing due to presence of dimensional hierarchy in the analysis. If I remove dimensional hierarchy column from the analysis, this error goes away and I am able to save data model and gather sample XML.
Any idea how to handle dimensional hierarchy column in BI Publisher data set?
Thanks & Regards

Hi,
I got this response from Oracle
“Sorry, this is not supported. If the BIEE Analysis has hierarchy columns then BIP cannot use it as a datasource.”

SQL Developer with Data Modeler, No Design Menu Option

Using SQL Developer 3.0.04 Build MAIN-04.34 with Data Modeler. I have created a logical design and wish to forward engineer this to a relational model.
I cannot seem to find the Design Menu option to use the >> Engineer to Relational Model option which is available under the Design Menu on the Stand Alone version of SQL Developer Data Modeler.
Have checked the following locations:
Tools -> Data Modeler
View -> Data Modeler
File -> Data Modeler
Right Click on my Logical Design
I have ensure that all my entities have the Engineer To property set to a valid Relational Model.
Is this a bug or am I missing a menu option / configuration setting?
Thanks in advance for any help
John

Hi John,
you can find ">> Engineer to Relational Mode" button among other buttons for logical diagram.
Philip

To develop Z-Report related to Cost Analysis as in COR3

Hi,
I am trying to develop a Z-Report similar to Cost analysis as in COR3, I just want to know the tables where actually the Planned Qty,Planned Cost,Actual Qty,Actual Cost are getting stored.My requirement is to run it for Multiple Orders with some more fields to add on(for eg. Accounting Document).Please help.
Regards,
Sandeep

For finding out the tables.
use st05> activate the trace> then come back COR3 then execute the same . after showing the output--> go back st05 and deactivate the trace and then use list trace. There you can all tables used in COR3
a®

Using CVS in SQL Developer for Data Modeler changes.

Hi,
I am fairly new to SQL Developer Data Modeler and associated version control mechanisms.
I am prototyping the storage of database designs and version control for the same, using the Data Modeler within SQL Developer. I have SQL Developer version 3.1.07.42 and I have also installed the CVS extension.
I can connect to our CVS server through sspi protocol and external CVS executable and am able to check out modules.
Below is the scenario where I am facing some issue:
I open the design from the checked out module and make changes and save it. In the File navigator, I look for the files that have been modified or added newly.
This behaves rather inconsistently in the sense that even after clicking on refresh button, sometimes it does not get refreshed. Next I try to look for the changes in Pending Changes(CVS) window. According to the other posts, I am supposed to look at the View - Data Modeler - Pending Changes window for data modeler changes but that shows up empty always( I am not sure if it is only tied to Subversion). But I do see the modified files/ files to be added to CVS under Versioning - CVS - Pending Changes window. The issue is that when I click on the refresh button in the window, all the files just vanish and all the counts show 0. Strangely if I go to Tools - Preferences - Versioning - CVS and just click OK, the pending changes window gets populated again( the counts are inconsistent at times).
I believe this issue is fixed and should work correctly in 3.1.07.42 but it does not seem to be case.
Also, I m not sure if I can use this CVS functionality available in SQL Dev for data modeler or should I be using an external client such as Wincvs for check in/ check out.
Please help.
Thanks

Hi Joop,
I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
David

Integration of SQL Developer and Data Modelling - concerns.

In aanother thread about OSDM connections, I commented that the development team for OSDM and the core product seem to separate and Sue responded.
Sue Harper wrote:
A clarification of the Data Modeling feedback application and this forum. The developers are part of the SQL Developer development team, but as for all our features, each developer has a focus area, so the Data Modeling developers will tend to answer those questions. The reason I said that they seem to be separate as that ODSM seems to be put together completely differently. I hit another example today. I downloaded a fresh copy of osdm without JDK. On starting it up, it complained it couldn't find a jre and quit. There was no prompt to specify the location as there is with SQLDevloper and there are no configuration files to edit.
SQLDeveloper already has issues with different components doing the same differently. The number of problems has been reduced but it has taken some time and I am concerned that the introduction of a large body of new code will cause things to revert to the bad old days in terms of quality.
I may or may not end up using OSDM, but I want to have the choice. I don't want components I don't use becoming part of the application and adding bloat. The migration components are a case in point. The "migration workbench" ought to be a completely separate add-in rather than a core component and I hope this is down with OSDM.

Jim,
"I don't want components I don't use becoming part of the application and adding bloat." Absolutely. and we agree. SQL Developer Data Modeling will be a separate standalone product so that users who don't want to use SQL Developer, but who do want to model will have that option. The nice thing about an integrated solution is that if you are doing database work and then want to do some modeling, you are in one tool. Our current plans are to release the standalone product in the initial production release and then follow that with the extension to SQL Developer depending on the customer demand. We do plan to release a read only viewer as part of SQL Developer 2.0. This will be an extension, which like the Migration extension, you can switch off. and from your note, you'd prefer the reverse, that these new extensions are pieces you choose to include and not choose to exclude.
I'm not certain we'll get agreement on this, but I'll be interested. Just this morning I was updating a thread were the request was for all the pieces to be there working out of the box.
Sue

Forum for SQL Developer and Data Modeler?

I searched now for a while all the available forums but did not found a special forum for the Oracle SQL Developer tool.
Where do I post questions about it?
Is there another, separate forum for SQL Developer Data Modeler?
Peter

https://forums.oracle.com/forums/category.jspa?categoryID=501

How to identify the locale in the development of Page Model

Hello there.
While building the page template, I need a way to identify in which locale I´m working. Some files is on UCM (in a structure segregate by idiom).
For sample: The english file will be in an address and the same (but in portuguese) in another one (address) - and its referenced by the Page Template. So, i need a flag about which locale (idiom) is the current - to use the right file for the right idiom.
There is some implicit variable that Webcenter give us with the current language ?
How to proceed that ?
Thank you.

you need to use Expression langauge
#{view.locale}
Apart from your requirement ,you can mix jstl and use it more productively.
like
<c:if test=${view.locale='en'}>
content from ucm
</c:if>
<c:if test=${view.locale='ar'}>
content from ucm
</c:if>
Hope it helps you.
Regards,
Hoque

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with a Anritsu make(model-MS710) Rf spectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire from the instrument and save the data in PC.the data

Will somebody provide me with a QBASIC 4.5 PROGRAM for Interfacing with an Anritsu make(model-MS710) RFspectrum analyser through GPIB ( NI-488.2 ) in DOS environment? I would like to aquire data from the instrument and save it in PC for printing purpose.

Hello,
Unfortunately I was unable to find a driver for this instrument. This leaves you with one of a couple options. First, I would like you to submit a request for this driver at:
http://www.ni.com/devzone/idnet/other.htm
We develop drivers in CVI and LabVIEW based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one. While this would not provide you with a QBASIC program, you may be able to create a DLL that you could call from QBASIC.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndica
te of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance
Good Luck,
Kim L.
Applications Engineer
National Instruments

Using DEBUG Mode in Oracle SQL Developer Data Modeler to Log SQL

Hello,
I am looking for the possibilty to enable the logging of SQL in Data Modeler.
Jeff Smith wrote an article how to do this for SQL Developer, for Data Modeler there are other configuration files. Does anyone have an idea?
Best regards,
Joop

Hello Philip,
the URL to the article of Jeff is: http://www.thatjeffsmith.com/archive/2012/10/using-debug-mode-in-oracle-sql-developer-to-log-sql/
in the install directory of Data Modeler 3.3.0.734 exists a file datamodeler\datamodeler\bin\datamodeler.conf. This analogue the situation for sql Developer.
However in this file there is no reference to a (non)debug file.
In ide/bin directory there is a ide-logging-debug.conf and ide-logging.conf file. But they are not referenced. Should one of them be included?
Joop

Developing Hidden Markov Models Acoustic Signature analysis/C​lassifier on compactRIO

Similar Messages

Maybe you are looking for

Developing Hidden Markov Models Acoustic Signature analysis/Classifier on compactRIO