Development environment model

Hi All,
As the WebLogic server is not cheap (!), we were wondering what model you
used in your development environments? Obviously, it would be very
expensive for each developer to have their own copy installed on their local
machine, but how do you manage multiple developers working on the same
application with the same server on a central machine, possibly modifying
the same beans or beans used by others, and deploying them to the same
server? Also, problems could occur if a problem is introduced into a bean
used by others. Does anyone have a tried and true method for managing this
and keeping multiple developers from interfering with the work of others?
Thanks!!!
Elaine

I do not think you are going to find a solution to the problems presented by
parallel development of a project. That is simply just a fact of life I
think. But I think that there are things that you can do to mitigate
interference.
In our development environment, we have a central repository that keeps all
of the code. There are multiple source lines. Developers map the source
lines to their machines. For example, your commerce application might have
a production line and a development line. You would make bug fixes for your
production code in the production line while you made advanced development
changes in the other line. A release team would bundle of the development
line and make "releases" of the product/site.
As for development environments, each developer should be able to have a
copy of the developer seat for WebLogic on their box. In our situation,
developers synchronize against the code line regularly. This provides the
benefit of using a stable code line but also synchronizing up against others
changes on a regular basis.
Some other application server vendors have tried a different technique for
development environments. One of those is requiring that you have a central
"test server" that is shared by all of the developers instead of
environments for each developer. In theory, the sounds good. But in
practice, it can be a real nightmare.
I hope that this helps.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"Elaine Herren" <[email protected]> wrote in message
news:[email protected]...
Hi All,
As the WebLogic server is not cheap (!), we were wondering what model you
used in your development environments? Obviously, it would be very
expensive for each developer to have their own copy installed on theirlocal
machine, but how do you manage multiple developers working on the same
application with the same server on a central machine, possibly modifying
the same beans or beans used by others, and deploying them to the same
server? Also, problems could occur if a problem is introduced into a bean
used by others. Does anyone have a tried and true method for managingthis
and keeping multiple developers from interfering with the work of others?
Thanks!!!
Elaine

Similar Messages

SSIS package works in development environment but fails when job scheduler executes, file path invalid

SIS package works in development environment but fails when job scheduler executes, file path invalid
Relatively simple package to get OLE-DB connection to MS FoxPro 9.0 DB
The failure in the job log states that the path is invalid its a network path (\\192.168.1.xxx\foldername) this has been run several ways with the remote computer being mapped as a network drive and through the \\ notation described above.
Thinking it was a security issue between the SQL agent account and my account I tested by subsitution myself as a proxy account for the agent when running this job, again same result failed on network path.
One issue I see is that the remote computer is running Server 2000 (legacy software incompatable with newer versions)
Is it possible that this is a security issue, since if i understand correctly the current MS domain security model didn't exist until Server 2003.

Hi REIData,
Have you got the issue resolved? Based on your description, please make sure the target folder is shared properly. If the computer on which the SQL Server Agent job runs doesn’t join the domain as the server that hosts the shared folder, you have to share
the folder with everyone by adding “Everyone” to the people list on the File Sharing page of the folder and assign "Read/Write" permission to it.
Regards,
Mike Yin
TechNet Community Support

Oracle SQL Developer Data Modeler start up error

Hi All,
I just downloaded Oracle SQL Developer Data Modeler (2.0.0.57.0) [Released 1 July 2009] by selecting the option "Oracle SQL Developer Data Modeler for Windows (This zip file includes the JRE)"
After I installed the same and tried to run it by clicking datamodeler.exe, I get the following error message
"unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll"
On the same machine I can successfuly run the Oracle SQL Develper with no errors. My machine is having Windows XP Professional SP3.
Any ideas? If there was a problem with Java, than the Oracle SQL Developer should also not run. But as stated it runs with out any error but the Oracle SQL Developer Data Modeler gives the above error.
Regards,
JAA149

1 - The above problem has nothing to do with the memmory. I tried on a 400 MB RAM, 900 MB RAM, 1.5 MB RAM & 2 MB RAM with the same arror.
"unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll"
http://i30.tinypic.com/9vkwf6.jpg
2 - There are two "datamodeler.exe: files
One is at D:\datamodeler\datamodeler.exe
2nd is at D:\datamodeler\bin\datamodeler.exe
The same error occurs with both the files.
3 - The Oracle SQL Developer Data Modeler version is "Oracle SQL Developer Data Modeler (2.0.0.57.0) [Released 1 July 2009]" and the file I downloaded is "Oracle SQL Developer Data Modeler for Windows (This zip file includes the JRE) - (57M)"
If I look in "D:\datamodeler\jdk\jre\README.txt" I find
"Java(TM) Platform, Standard Edition Runtime Environment Version 6"
If I run "D:\datamodeler\jdk\jre\bin\javacpl.exe" I get
http://i30.tinypic.com/mt8ocn.jpg
If I run "D:\datamodeler\jdk\jre\bin\jureg.exe" I get
http://i28.tinypic.com/30boiyo.jpg
If i check at the control panle add/remove program
http://i30.tinypic.com/1428tba.jpg
If I go to "http://www.java.com/en/download/manual.jsp" and download "jre-6u16-windows-i586-s.exe" and run it.
If I go to "C:\Program Files\Java\jre6" I find the same files as in "D:\datamodeler\jdk\jre"
I am able to run Oracle SQL Developer with out any kind of error let alone the above one. But with Oracle SQL Developer Data Modeler I get the above mentioned error no matter what I try.
As the error states "unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll". The file "jvm.dll" is located at two places. One at "D:\datamodeler\jdk\jre\bin\client\jvm.dll" and the second at "D:\datamodeler\jdk\jre\bin\server\jvm.dll"
A similiar problem occurs with JDeveloper with the fllowing solution
http://forums.oracle.com/forums/thread.jspa?threadID=506339&start=0&tstart=0
Which states the following
"hello!
in the problem with JDeveloper i have a solution. The jdk have a file jvm.dll in the path: jdk/jre/bin/client/jvm.dll this is the problem ... now in the path:jdk/jre/bin/client/ojvm has a file with the same name if you copy and paste this file to the another path, now its works fine your Jdeveloper.
Jdeveloper use two files to jvm.dll to work one in the folder /client and other in /server copy the same file to the two locations for precaution
for me work fine thanks..."
I tried to do the same (Copy from client folder to server folder)
D:\datamodeler\jdk\jre\bin\client\jvm.dll
COPIED THIS FILE TO
D:\datamodeler\jdk\jre\bin\server\jvm.dll
Nada. So I reversed it (copied from server folder to client folder)
D:\datamodeler\jdk\jre\bin\server\jvm.dll
COPIED THIS FILE TO
D:\datamodeler\jdk\jre\bin\client\jvm.dll
Does not work. So I tried another solution stated at the same forum entry
"Well,
i solved the problem by this way :
<SQLDEVELOPER>/jdev/bin/ide.conf
In this file, change this line :
AddVMOption -Xmx512M
by
AddVMOption -Xmx256M
Now, the executable is lauching correctly. No more errors with Java Virtual Machine.
But is it a good thing to solve it like that ?"
But the ide.conf file is only at "D:\sqldeveloper\ide\bin\ide.conf" which is for the SQL Developer and not the SQl Developer Data Modeler
Correct me if I am wrong but
JRE = Java Run Time Envoirment
JDK = Java Development Kit
And Oracle SQL Developer Data Modeler needs JRE and not JDK. In any case I download JDK
jdk-6u14-javafx-1_2-windows-i586.exe (121,306 KB) and installed it but no succcess.
I tried every thing except completely re-install my whole PC.
Any help will be much appreciated.
Cordially,
Jawad

Connection to SQL Developer Data Modeler Fails

All,
I am using Oracle SQL Developer Data Modeler version 3.0.0.665 in an Oracle 10g database environment. When I try to import DDLs, I get the following error message:
NoSuchMethodError:
oracle.i18.ntext.converter.CharacterConverterOGS.getInstance(I)Loracle/i18n/text/converter/CharacterConverter;I use the same connection profile in Oracle SQL Developer version 1.5.0.53, and my connection works fine there, but the same credentials in SQL Developer Data Modeler fails with the above error message. Any thoughts what causes this connection problem?
Thank you,
Seyed

Hi Philip,
Thank you so much for the information. Your suggested solution resolved my problem. For some reason when I first installed the Data Modeler, it worked fine and I was able to save the result into PDF files. Then my connection went bad and I posted this question on this forum.
Again thank you very much,
Seyed

SQL Developer Data Modeling pricing

I just downloaded the EA version of SQL Developer Data Modeling. I read in the release notes that the production release won't be free - any idea about the pricing ?
Matthias

Once the pricing for SQL Developer Data Modeling has been confirmed, we will release the full licensing detail. This will not affect the SQL Developer licensing that exists today. We plan to release SQL Developer Data Modeling as a stand alone product and then as an extension to SQL Developer, for those who want to work in an integrated environment. You can download the second early adopter release of SQL Developer Data Modeling and test and use the product. Once we have a production release, we will not answer queries on the early adopter releases and the feedback application we are currently offering for this will be shut down. As such you can continue to work with the early adopter release, but it is incomplete and would be unsupported.
Sue

Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
Dilip

Hi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Why does Build Application vi work in development environment but not in executable; error 1025

Hello,
I have an application ("A") that I am trying to build using another application ("BuildA").
I can create an application for A manually from its project using the Build Specification, and it works fine (A.exe).
Also, when I run BuildA.vi in the development environment it calls the "Build.vi" correctly and again builds application A.exe just fine.
Then, when I make BuildA an application (manually) and run BuildA.exe, I would expect it to also create A.exe just like BuildA.vi did in the development environment.
However, it fails with the error:
Code: 1025
Open VI Reference in NI_App_Builder_API.lvlib:Build (path).vi->BuildA.vi<APPEND>
VI Path: <b>C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi</b>
I noticed this thread , which looks like a similar problem, but no conclusion was reached.
Why does BuildA.vi work fine in the LabVIEW environment, but the application BuildA.exe does not work? All paths are hard-coded, so it shouldn't be a path issue.
Thanks,
-john
Solved!
Go to Solution.
Attachments:
AppBuild.zip ‏175 KB

Interesting code. I'm curious how you came to decide 324ms in your while loop, and 58 in the other, and then 5136ms at the end. In any case I suspect this has to do with this line of text in the help of the Build.vi.
If you plan to run a build specification on the LabVIEW Run-Time Engine, do not include the Build VI in any of the VIs for the build specification.
I don't fully know what this means but it might be why it isn't working.
The Build.vi opens all Context (application instances) and then looks for the one named "NI.LV.MxLvProvider". This I assume is a application instance NI uses to build applications. It then uses this and opens some other VIs in this instance for the building. The error you are getting is "Application Reference is invalid" meaning it couldn't find the NI.LV.MxLvProvider instance it needs to build. Again I believe this maybe because you are in a run-time environment and that instance doesn't exist there.
At the end of the day I'm guessing since Application Builder is not free, NI probably doesn't include it in the Run-Time engine, which is free. So you can't build the way you want. You could have and EXE running in the run-time open an instance in the development, then run your VI from there if you must make this an EXE. It maybe easier to just edit the BuildA.vi to have a "Run When Opened" so that you double click the VI and it runs which behaves like an EXE sorta.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Development environment for SharePoint 2013

Hi,
We have requirement for one of the project. Team size would be approximately 30 resources. Development would be entirely for SharePoint 2013 Intranet solution. this will be OOTB Intranet application. We will be developing InfoPath forms and Nintex Workflows.
For such requirement we would like to setup local development environment by using either Virtual Machines.
Can anyone help me to identify that how many VM's would be required for the same? How many simultaneous users can use and work at a time? What other things I need to consider for infrastructure? How can i suggest the best possible solution for this.
Thanks in advance.
Abhijeet Khopade

Hi,
According to your description, my understanding is that you want to set up the environment for SharePoint Development.
Here is a detailed article about configuring development environment:
Setting up a SharePoint 2013 Development Environment
For VM count, it depends on your project development requirements, for VM license and management ,if you are using Hyper-V, I suggest you can create posts in Hyper-V forum:
Hyper-V forum
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How do I determine if a VI is running in the runtime engine or LabView Development Environment?

Is there a function or VI that I can call that will tell me if the program is running in the LabVIEW Runtime Engine or if it is running in the LabVIEW developement Environment? I am using LabView 8.5.
I have a menu item, File/Exit, and I would like to call the Exit LabVIEW vi if running in the runtime engine when that item is selected. However, in development, I don't want to shut down LabVIEW when I select that menu item.
Maybe there is a more appropriate way to exit the program. However, I am looking for something elegant. I'm sure I could find some other way to accomplish the same thing, but I'm looking for a clean way to do it.
Thanks

Here is a small VI with this exact function.
Attachments:
Is EXE.vi ‏9 KB

Foreign key Mapping based on Data - in SQL Developer Data modeler

Team
Do SQL Developer Data modeler supports Foreign Key mapping based on the Data in the Schema rather defined at the DDL ? For e.g if we implement a Objects Relation ship mapping in Data base, we don't define Foreign keys at table creation.
Toad does this feature through "AUTOMATIC FOREIGN KEYS MAPPING IN TOAD DATA MODELER" more info at (http://toadworld.com/Blogs/tabid/67/EntryId/905/Automatic-Foreign-Keys-Mapping-in-Toad-Data-Modeler.aspx)
any one know how to implement through some scripts also helps me
Regards
Raj

If you have table PKs defined and the candidate columns match those PK columns, then you can use the Discover Foreign Keys utility. Right mouse over the relational model name (node) in the left browser. It is about half way down the menu. I did a blog post about it last week on kentgraziano.com.

Error Page shown while runnning a Test page from Development environment

Hi,
I have set the development environment for JDeveloper with OA Extension.
I completed the setup steps for "You are Customer,Consultant or Support Rep".
I have created a new Database Connection for the DB server and obtained "Success" status on clicking "Test Connection" buton in the Dtabase Connection wizard.
When I run the Test JSP(Tutorial.jpr),I get an error page.
It shows following exception with a lengthy stack trace.
oracle.apps.fnd.framework.OAException:
Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-01003: no statement parsed
A reply about solution for this issue would be of great help.
Thanks,
Gowtam

FYI,
Could not lookup message because there is no database connection
Thanks

Java Card Kit - development environment

Hello!
I need to upgrade to the latest Java Card Kit, because I need some of the classes in javacardx.framework, which is not supported by version 2.2.1.
But some problems arises when I'm trying to use version 2.2.2
1) It requires jdk1.5. Ok, no problem (ehh)
2) I'm using eclipseME 1.6.0. This requires jdk 1.4.2.
3) I downloaded WTK2.5 which supports jdk 1.5, but I cannot get this to work properly. This is the error output of WTK when my application tries to connect to the running cref-simulator:
java.io.IOException: error 10054 during TCP read
I have not found a solution for this problem yet. But my question is:
What is the optimal development environment for java card 2.2.2? What kind of MIDlet-emulator and which version are people using together with java card 2.2.2? Is there a eclipse plugin that supports jdk 1.5?
Regards
Haavard

Only cref can create and use EEPROM images.
You do not communicate with cref via SATSA apdu.... In emulation environment APDU commands are forwarded via satsa-apduio.jar to any process which can accept these commands. It's a pity but you just cannot replace satsa-apduio.jar with apduio.jar from JCDK 2.2.2 (which uses T=0 by default).
As for my proxy - it's not necessary to include it in your project - it's just an utility to accept T=0 APDU and forward them to smart-card. I think there's need to add new functionality - forwarding T=0 APDUs to other process which accepts T=1. I think it will solve your problem.

Oracle SQL Developer Data Modeler 3.0 Bugs, Resolution and workarounds

The purpose of this thread is to list bugs discovered while using ORACLE SQL Developer Data Modeler 3.0
Mainly with SQL SERVER 2005 and ORACLE 10g models.

SQL Server Physical model doesn't save table identity column.
here are the steps to get this bug:
1. create a table in relational model with a column as an integer to be used as an identity.
2. create or open a physical model for SQL-SERVER 2005
3. open the table in the physical model
4. edit the integer column property dialog
5. tick the identity check box and close the property dialog
6. save the model and close it
7. open it again, you will find the identity check is removed! (probably not saved from the start)

Serious performance issue with LV 7.1 Development Environment

I'm posting this issue to the forums prior to submitting a bug report to ensure that the problems I'm having are reproducible. To reproduce this bug, you're going to have to be an advanced user with a large project (hundreds to thousands of VIs) as the performance problem is related to the number of VIs loaded.
The issue is the increasingly poor performance of the LabVIEW 7.1 Development Environment as the number of VIs in memory increases. The actions affected include switching between front panel and diagram, saving a VI, copy and paste, clicking a menu, and the mysterious time spent (compiling? editing the runtime menu? changing the toolbar state?) between pressing the run button and when the code actually starts executing. Scrolling and, interestingly, copying via a control-drag are not affected. Running time of entirely on-diagram code does not seem to be affected.
These problems are quite severe and significantly decrease my productivity as a programmer. Since they are development environment UI issues, it's been difficult for me to find a good example VI; the best I can do is the attached "LV Speed Test.vi". It doesn't test the issues that affect me most, but it seems to suffer from the same problem.
This simple VI just shows and hides the menu bar 100 times in a tight for loop. When it is the only VI loaded, it executes in about 350 msec on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a single project-encompassing VI (let's call it the "giant") that references a total of about 900 user and VI-lib subVIs, the test routine takes almost a minute and half to run...about 240 times slower! I've tried this on my laptop with similar results.
The problem appears to be related to the *number* of VIs loaded and not the memory utilization. For example, if I close the "giant", and create a new VI ("memhog") that does nothing but initialize a length 20,000,000 array of doubles and stores it in an uninitialized shift register, LabView's overall memory usage (as shown in the task manager) jumps enormously, but LV Speed Test executes in about 450 msec...only slightly slower than with a fresh copy of Labview.
The problem seems to be related to excessive context switching. The Windows task manager shows over a thirteen hundred page faults occur when "LV Speed Test" is run with the "giant" in the background, versus zero or none when run by itself or when "memhog" has used up 160+MB of space.
The problem only seems to affect the frontmost window. (Unfortunately, that's where we LV programmers spend all of our time!) If you start "LV Speed Test" and then put "giant" in the foreground "LV Speed Test" runs much faster. In fact, if you use the VI server to put the "giant" VI in the foreground programmatically at the start of "LV Speed Test", execution time drops back to 450 msec, and there are no page faults!
These results show the issue is not related to video drivers or the Windows virtual memory system. My suspicion is that there is a faulty routine in LV 7.1 that is traversing the entire VI hierarchy every time certain events are thrown in the foreground window. It could be due to a problem with the Windows event tracking system, but this seems less likely.
I have been programming LV for about 7 years and switched from LV 6.1 to 7.1 about four months ago. I know NI engineers have put thousands of hours developing and testing LV 7.1, but honestly I find myself wishing I had never upgraded from using LV 6.1. (To whomever thought "hide trailing zeros" should be the default for floating point controls...what were you thinking?!)
I know each new version of LabView causes old-timers like me to grouse that things were better back in the days when we etched our block diagrams on stone tablets, etc., and honestly I'm not going to go back. I am committed to LabView 7.1. I just wish it were not so slow on my big projects!
Attachments:
LV_Speed_Test.vi ‏22 KB

Hi,
I can confirm this behavior. Setting the execution system to "user
interface" helps a bit, but there is still a big difference.
I get a feeling it has something to do with window messages, perhaps
WM_PAINT or something, that is handled differently if a VI is not
frontmost... But what do I know...
Don't know if it should be called a bug, but it sure is something that could
be optimized.
Regards,
Wiebe.
"Rob Calhoun" wrote in message
news:[email protected]...
> I'm posting this issue to the forums prior to submitting a bug report
> to ensure that the problems I'm having are reproducible. To reproduce
> this bug, you're going to have to be an advanced user with a large
> project (hundreds to thousands of VIs) as the performance problem is
> related to the number of VIs loaded.
>
> The issue is the increasingly poor performance of the LabVIEW 7.1
> Development Environment as the number of VIs in memory increases. The
> actions affected include switching between front panel and diagram,
> saving a VI, copy and paste, clicking a menu, and the mysterious time
> spent (compiling? editing the runtime menu? changing the toolbar
> state?) between pressing the run button and when the code actually
> starts executing. Scrolling and, interestingly, copying via a
> control-drag are not affected. Running time of entirely on-diagram
> code does not seem to be affected.
>
> These problems are quite severe and significantly decrease my
> productivity as a programmer. Since they are development environment
> UI issues, it's been difficult for me to find a good example VI; the
> best I can do is the attached "LV Speed Test.vi". It doesn't test the
> issues that affect me most, but it seems to suffer from the same
> problem.
>
> This simple VI just shows and hides the menu bar 100 times in a tight
> for loop. When it is the only VI loaded, it executes in about 350 msec
> on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a
> single project-encompassing VI (let's call it the "giant") that
> references a total of about 900 user and VI-lib subVIs, the test
> routine takes almost a minute and half to run...about 240 times
> slower! I've tried this on my laptop with similar results.
>
> The problem appears to be related to the *number* of VIs loaded and
> not the memory utilization. For example, if I close the "giant", and
> create a new VI ("memhog") that does nothing but initialize a length
> 20,000,000 array of doubles and stores it in an uninitialized shift
> register, LabView's overall memory usage (as shown in the task
> manager) jumps enormously, but LV Speed Test executes in about 450
> msec...only slightly slower than with a fresh copy of Labview.
>
> The problem seems to be related to excessive context switching. The
> Windows task manager shows over a thirteen hundred page faults occur
> when "LV Speed Test" is run with the "giant" in the background, versus
> zero or none when run by itself or when "memhog" has used up 160+MB of
> space.
>
> The problem only seems to affect the frontmost window. (Unfortunately,
> that's where we LV programmers spend all of our time!) If you start
> "LV Speed Test" and then put "giant" in the foreground "LV Speed Test"
> runs much faster. In fact, if you use the VI server to put the "giant"
> VI in the foreground programmatically at the start of "LV Speed Test",
> execution time drops back to 450 msec, and there are no page faults!
>
> These results show the issue is not related to video drivers or the
> Windows virtual memory system. My suspicion is that there is a faulty
> routine in LV 7.1 that is traversing the entire VI hierarchy every
> time certain events are thrown in the foreground window. It could be
> due to a problem with the Windows event tracking system, but this
> seems less likely.
>
> I have been programming LV for about 7 years and switched from LV 6.1
> to 7.1 about four months ago. I know NI engineers have put thousands
> of hours developing and testing LV 7.1, but honestly I find myself
> wishing I had never upgraded from using LV 6.1. (To whomever thought
> "hide trailing zeros" should be the default for floating point
> controls...what were you thinking?!)
>
> I know each new version of LabView causes old-timers like me to grouse
> that things were better back in the days when we etched our block
> diagrams on stone tablets, etc., and honestly I'm not going to go
> back. I am committed to LabView 7.1. I just wish it were not so slow
> on my big projects!

Eclipse as a development environment with Jakarta Tomcat

Hello:
I am setting up the new development environment for my application (project). Below are the components involved::
�     Eclipse 3.1
�     myEclipse - EnterpriseWorkbenchInstaller_4.0GA_E3.1
�     jakarta-tomcat-5.0.28 (Application Server)
�     Sysdeo Eclipse Tomcat Launcher plugin - tomcatPluginV31beta
�     SDK 1.4.2_08
�     Microsoft XP sp2 operating system
I have no issue with creation of project structure in eclipse IDE, compilation, and deployment, but there are some exception upon running the application.
My project folder structure as follows:
MyApplication/
src/
Conf/
Web/
classes
taglib
lib
web.xml
�     my application has few dependent projects, therefore I copied all the dependent projects final compiled classes (jars) to �lib� folder.
�     I set all necessary classpath according to tomcat documentation.
�     I created MyApplication.xml file under D:\jakarta-tomcat-5.0.28\conf\Catalina\localhost\ folder with the below context
<Context path="/MyApplication " docBase="D:/xx/xxx/dev/src/ MyApplication/web" debug="0" reloadable="true" />
�     I don�t get any exception during compilation and deployment process.
�     I would greatly appreciate if you could give me a tips!!!!!!!!!!!!!!!!!!!!!!
Error as follows:
2005-10-10 17:31:45 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
2005-10-10 17:31:47 StandardContext[jsp-examples]ContextListener: contextInitialized()
2005-10-10 17:31:47 StandardContext[jsp-examples]SessionListener: contextInitialized()
2005-10-10 17:31:47 StandardContext[servlets-examples]ContextListener: contextInitialized()
2005-10-10 17:31:47 StandardContext[servlets-examples]SessionListener: contextInitialized()
2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Associated with Deployer 'localhost'
2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Global resources are available
2005-10-10 17:32:27 StandardContext[manager]HTMLManager: list: Listing contexts for virtual host 'localhost'
2005-10-10 17:32:35 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
java.lang.IllegalStateException: getOutputStream() has already been called for this response
     at org.apache.coyote.tomcat5.CoyoteResponse.getWriter(CoyoteResponse.java:599)
     at org.apache.coyote.tomcat5.CoyoteResponseFacade.getWriter(CoyoteResponseFacade.java:163)
     at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:122)
     at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:115)
     at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:190)
     at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:115)
     at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:75)
     at org.apache.jsp.default_jsp._jspService(default_jsp.java:101)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:462)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
path setting as follows:
%JAVA_HOME%\bin;D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Borland\AppServer\bin;C:\Program Files\CA\PEC\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\nls;%SystemRoot%\system32\nls\ENGLISH;C:\Program Files\Attachmate\E!E2K\;C:\Program Files\CA\AllFusion Harvest Change Manager;D:\jwsdp-1.1\jaxb-1.0\bin;D:\jwsdp-1.1\jwsdp-shared\bin;C:\Borland\classes12.zip;C:\Program Files\UltraEdit;D:\jakarta-tomcat-5.0.28\webapps\cst\WEB-INF\classes;D:\EPS\EB_CST_v3.7.2\dev\src\cst;%PATH%
Classpath setting as follows:
.;%third_pty%\xerces.jar;D:\EPS\EB_CST_v3.7.2\dev\src\cst;D:\jakarta-tomcat-5.0.28\webapps\cst;D:\jakarta-tomcat-5.0.28\common\lib\servlet-api.jar;D:\jakarta-tomcat-5.0.28\common\lib\jsp-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-ri.jar;%third_pty%\ant.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\dom.jar;D:\jwsdp-1.1\jwsdp-shared\lib\jax-qname.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-libs.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-xjc.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\jaxp-api.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\sax.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\xercesImpl.jar;%third_pty%\activation.jar;%third_pty%\ant-optional.jar;%third_pty%\j2ee.jar;%third_pty%\jakarta-regexp.jar;%third_pty%\jaxp.jar;%third_pty%\jcert.jar;%third_pty%\jnet.jar;%third_pty%\jsse.jar;%third_pty%\xalan.jar;C:\MSJDBSLib\msbase.jar;C:\MSJDBSLib\mssqlserver.jar;C:\MSJDBSLib\msutil.jar;
Other IDE setting:
As per tomcat documentation.

Hello:
I overcame the above issue by changing index.html to index.jsp, but now i am facing another issue as shown below:
On top of the above change i too included j2ee.jar (from websphere) in the classpath to overcome the below issue, but even then i am getting the same error.
Error as follows:
javax.servlet.ServletException: Error instantiating servlet class com.metavante.cst.control.web.LoginMainServlet
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:996)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:687)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:671)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
     at org.apache.catalina.authenticator.FormAuthenticator.authenticate(FormAuthenticator.java:214)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:504)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
----- Root Cause -----
java.lang.NoClassDefFoundError: javax/ejb/EJBObject
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
     at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634)
     at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
     at java.lang.Class.getConstructor0(Class.java:1930)
     at java.lang.Class.newInstance0(Class.java:278)
     at java.lang.Class.newInstance(Class.java:261)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:987)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:687)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:671)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
     at org.apache.catalina.authenticator.FormAuthenticator.authenticate(FormAuthenticator.java:214)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:504)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)

Development environment model

Similar Messages

Maybe you are looking for