Device compatibility of Avaya VoIP Server with NEC Softphone/IP Phone

For NEC is UNIVERGE SV8500 and NEAX7400 IMX, and for AVAYA I still don't know which avaya media server can replace those PABX from NEC. 
Do you have any suggestion?

Hi,
I'd like ask about device compatibility between avaya and NEC. Currently, I have a VoIP network infrastructure of NEC as a backend & end device.
Later I intend to replace the NEC with Avaya as a backend, but still using NEC softphone/IP phone as end devices. 
Is Avaya media server compatible with NEC device? 
Thanks,
This topic first appeared in the Spiceworks Community

Similar Messages

  • My email account in Mail.app is IMAP, but when I delete emails, they don't delete from other devices connected to the mail server with IMAP. Deleted mail on other devices delete as normal from the server and thus from other devices as normal.

    MacBook Pro, late 2011 version. Up to date Mountain Lion.
    My email account in the Mail.app is set up as IMAP, but when I delete emails in the Mac Mail App, they are not deleted from the mail clients of the other devices that are connected to the mail server with IMAP. IMAP works perfectly between Windows Outlook 2010, iPad Mail App and Android default mail client. Deleted messages behave correctly, as in delete from one device and the mail is deleted from all devices.
    Having just tested in reverse order on the Mac; emails deleted from the email client on Windows, iPad and Android are not deleted in the Mac Mail App.  It appears that the account is behaving like POP rather than IMAP.
    Any advice on how to have IMAP work correctly on the MacBook Pro Mail.app?
    Thank you.

    Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
    the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this!  I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did.  Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
    The lesson learned, never assume - always double  check!  All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
    Thank you anyway for attempting to help me!
    Cheers

  • Access Mail on Mac Server with non-Apple device

    I currently have a Windows server with Exchange installed and am considering replacing it with a Mac Server. IF I do that, can my non-Apple Windoes 7 & XP computers access Mail on the Mac Server as they now do with Exchange?

    Yes and no.  You will be able to access mail via IMAP but you will have a dickens of a time getting Address Book and Calendars to work.  Apple uses CardDAV and CalDAV respectively for these services.  Your options on WIndows are limited.  See here for options:
    http://caldav.calconnect.org/implementations/clients.html
    http://carddav.calconnect.org/implementations/clients.html
    If you are looking for something to "replace" Exchange, then check out Kerio Connect.

  • Wireless VoIP roaming - getting an 802.11g phone to roam with CCX / CCKM

    Hello,
    Our group is facing a pretty difficult issue at the moment, we are trying to deploy a wireless Avaya VoIP phone at one of our sites in Australia.
    The site in question is located in Western Australia, which is on the other side of the continent to where our 5508 WLC is (in Sydney), so there is a latency of abouy 60-80ms between the sites. When testing the phone at the Sydney location, we're able to authenticate the phone via a number of methods (802.11x, 802.11x FT) and the phone can roam fine. When testing at the WA location, the 802.11x authentication method drops the call when roaming, and the 802.11x FT authentication method has about 2 seconds of dead air during roaming / reassociation.
    The avaya phone supports a few different methods of "fast handoff" - CCKM and OKC - and we've only got the OKC (802.11 version of fast transition) method to work, not CCKM. The phone reports error messages when trying to connect to the network with CCKM enabled - specifically "No CCKM AP's" and "No CCX AP's".
    So I have some questions...
    1) Is a 60ms latency between sites a dealbreaker for wireless voice usually?
    2) The voice engineer is convinced that CCX is disabled on the WLAN. My understanding of CCX (according to online Cisco docco) is that it can't be switched off. Is this the case? I know CCKM can be disabled (in the Layer 2 Authentication options) but can CCX or CCKM be enabled / disabled anywhere else?
    3) The voice engineer has a point on one front - if we do a command "show ap ccx rm [APName] status", the command outputs "Beacon Request ..... Disabled." This seems to be related to CCX Location awareness - but even after switching this on in the WLC (both globally and for the WLAN), I cannot get this to enable.
    3) We have had some minimal success getting the phone to connect with only CCKM Authentication enabled. The phone could not roam. When we did this, I looked at the Client information in the WLC of this device and the CCX Version read "Not Supported." Does this perhaps mean some kind of CCX compatibility problem?
    4) Is there much of a difference between OKC (Fast Transition) and CCKM in terms of roaming time? I.e. are we better off trying to install a WLC at the location rather than getting this work remotely.
    We're a bit lost on this. Anyone that's had experience in getting Wireless VoIP phones to roam on a wireless campus before, particularly where the WLC is remote, I'd love to hear from you.
    Thanks,
    Dave

    Hi, thanks Steve. Aironet IE is enabled.
    The encryption is news to me. We intially tried WPA2/AES & WPA/TKIP together but had no success at all. We then moved to WPA/TKIP, and we were able to get the phone to connect to the WLAN using the CCKM settings, but it doesn't roam at all & the WLC reported the Clients CCX version was "Not Supported".
    I think the phone has CCX version 4. Are you certain that the phone will only support WPA & WPA2 with CCX v5? Just that this sounds a little strange, the phone's documentation claims to support CCKM, but if you're right then there's no way we can secure our phone conversations? In previous testing, we did actually temporarily drop all authentication / encryption and the roaming worked perfectly.
    Thanks for your help...

  • Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

    Hello, dear Colleagues.
    User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2. 
    If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below). 
    But I can change it manually with "Print Management". Features become active.
    The main purpose - to uncheck "Enable advanced printing features"  with powershell
    scripts.
    $erroractionpreference = "continue"
    $colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
    ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
    If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
    Write-host $objPrinter.Name
    Write-Host $objPrinter.RawOnly
    $objPrinter.RawOnly = "True" # Untick and update the object in WMI
    $objPrinter.Put()
    It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
    Exception calling "Put" with "0" argument(s): "Generic failure "
    At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
    + $objPrinter.Put()
    + ~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : DotNetMethodException
    Can you help me with that? Look like somethings with rights.
    Thank you.

    Hello, Alan
    Morris.
    Thanks for your reply.
    I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
    I've noticed interesting thing - if to
    check "Enable advanced printing features"
    manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
    feature manually again (thru Print Management snap-in),
    and enable manually again, PS Script will work. Very strange situation.
    Thanks.

  • Cursor and black screen on XFree86 server with DirectFb backend

    Hi all.
    I need to bring up lightweight XFree86 server with DirectFB as video backend on CE Linux (Intel Set Top Box). For now I've done following:
    1.    Compiled and tested DirectFB with multi application support (fusion library).
    2.    Compiled XFree86 with DirectFB as backend.
    3.    X based applications (xclock, for example) can be drawn from device on remote display after exporting DISPLAY variable.
    4.    XDirectFB server can be started successfully without errors.
    I faced with following X server problems:
    1.    I can see only black display with active graphic mouse cursor once I started X server and any X application (xclock, for example). Its looks like application windows are drawn but invisible on a screen. When I moving mouse, cursor changes from arrow to resize or others icons.
    2.    When I try to use XFree86 as remote X server for drawing, client program issue XRandr command is not supported. Again I can see blank black screen and valid mouse cursor, which seems manage invisible windows.
    3.    XFree86 manuals points that X server uses configuration files /etc/X11/xorg.conf  or /etc/X11/XF86Config for video/input devices settings. Does XFree86 with DirectFB video backend use such configuration files? Which one? What video driver should I define there? I have tried both of configuration files without success. It seems X server ingoring them.
    Appreciate advices, suggestions and visions.
    Please note me if additional information requires.
    Medvic.

    I have discovered solutions for my problems (unfortunaly not causes). Hope this helps someone.
    1. I can see only black display with active graphic mouse cursor once I started X server
    I have found that XDirectFB binary accepts 'defaultOpacity' (default opacity for created top level windows)argument which can vary in <1-255> range. Value 1 corresponds to full invisibility windows state and 255 to zero opacity. It seems 255 is default value for opacity, but in my case screen still black/blank. I set 254 opacity and wow! Its a miracle - I can see windows!!!
    2. When I try to use XFree86 as remote X server for drawing ... I can see blank black screen and valid mouse cursor
    Now I can use my X server for rendering remote client's graphic applications.
    3. ... Does XFree86 with DirectFB video backend use such configuration files? Which one? What video driver should I define there?
    It seems indeed XDirectFB server doesn't use any configuration files. For my case X server normally starts without configuration files.
    If you have any questions or need some clarifications, please contact me.
    Regards, Medvic.
    Last edited by medvic (2009-12-30 22:24:32)

  • What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

    I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
    I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
    THANKS

    Hello Paneesh,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s.  I recommend the following steps:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    You can find the full article here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Installing OMS 10.2.0.5 on server with Oracle 11.1.0.7

    IBM w/AIX 6.1
    I am wondering if there would be any expected issues to download and install the latest version of OMS (Oracle Management Server for Grid Control), 10.2.0.5 onto a server that already has Oracle 11.1.0.7 running on it.
    I intend to use the 11.1.0.7 for the actual OMS repository database, (as well as my RMAN catalog database).
    While I am fairly certain that there are no compatibility issues with running the 11.1.0.7 for the OMS repository database (and RMAN catalog databases), but what I'm concerned with is the order of installing.
    As noted, I have already installed the 11.1.0.6 and upgraded to 11.1.0.7.
    Can I simply download and install the OMS 10.2.0.5? I'm assuming it would just put everything into a separate Oracle Home such as /oracle/product/oms (or something like that), while the 11.1.0.7 is located in /oracle/product/11.1.

    Yes, I know that, but my question still remains regarding the installation of OMS on the same server with existing Oracle software (especially of a higher version)?
    Does anyone have any experience with installing latest version of OEM (10.2.0.5) on a server already having a later version of Oracle RDBMS (11.1.0.x)?
    Thanks.

  • How to configure Time Capsule etc as a local network server with remote access server and for backups

    I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
    We've managed to set up a wireless network and both have wireless internet access through the TC
    But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
    I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
    So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

    But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
    Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
    And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
    Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
    What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
    A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
    One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
    How is the security setup on the TC?
    The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate  but it allows me full access to all the files.
    If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

  • Can I install oracle VM server with lvm and md raid?

    Hello,
    I am trying to install oracle vm server 2.1.2 on a server with md raid and I would like to use lvm on it. It seems to me that the installer md raid support is not working and lvm support is missing.
    Can you help me?
    Thanks in advance for any reply.
    Mario Giammarco

    Hi,
    now i understand...
    hm - if the install does let you create a raid ( mdraid ) -> you can try to setup the system preconfigured by anaconda...
    the lines would be like following:
    part swap size 8000 asprimary --ondisk cciss/c0d0
    part swap size 8000 asprimary --ondisk cciss/c0d1
    part /boot fstype ext3 size 200 asprimary ondisk cciss/c0d0
    part / fstype ext3 size 14750 asprimary ondisk cciss/c0d0
    part /appl fstype ext3 size 30000 asprimary ondisk cciss/c0d1
    part raid.01 size 1000 grow --ondisk cciss/c0d0
    part raid.02 size 1000 grow --ondisk cciss/c0d1
    raid /disk/disk1 level 0 device=md0 --fstype ext3 raid.01 raid.02
    -> check out the your anaconda file: #/root/anaconda*
    -> -> modify the part lines and setup a anaconda installer...
    ( would also a better idea - if you like to install standarized systems )
    let me know - if you need assistance with anaconda...

  • Use a SQL 2012 database server with Reporting Services 2008?

    Hello, we have a SQL Server 2008 R2 Reporting Services Standard server with the reporting databases running on a SQL Server 2008 Standard database server. I would like to upgrade the database server to SQL Server 2012 before I upgrade the reporting server.
    Can I run SQL Server 2008 R2 Reporting Services against a 2008-version database running on a SQL 2012 database server? Thanks for your help.

     
    Hi Nicole
    Thanks for your posting.
    Are you asking if we can connect from SSRS 2008 r2 to a database sitting on SQL Server 2012.  Am I right?, please ignore me if I misunderstood your question. If that is your question
    then I think you will be able to using BIDS 2008, I have created A database on SQL Server 2012 and I use that database table inside  my SSRS 2008 R2 dataset. I can even think that you can use a database of compatibility level of 2012(110) as well
    Many thanks
    Syed Qazafi Anjum

  • Adding BIS accounts for a device linked to BES Exchange server

    Please could somone guide me in terms of how to add BIS accounts and a BES account to the same device.
    The handset I am using is a Curve 8520 running OS5.0.0.592. I upgraded the OS from 4.6 to 5 today.
    I have been using this handset for a long time, running purely on BES with a single email account.
    Now i need to have other email accounts link to the same handset so that I can stay up to date with the various accounts I manage. I upgraded to OS5 hoping that I would find the function to add other accounts.
    The phone only allows me to link to 1 single exchange server. Under Email Settings there are no options to add second or third BIS accounts! I have also looked for the 'personal mail' folder or icon, but this icon has never been on this handset. I have read that some people have done this and managed to have BIS accounts and a BES account running simultaneoously, but I cannot find how to do this.
    Please could someone advise on how to do this.

    I have this problem too.  The only thing I am guessing is that the domain name of my email is also a domain name I use to adminstrate a website.  When mail goes looking for a server it finds a localhost server with promising looking credentials.
    What say ye?

  • Migrating Non ASM, Non RMAN to New Server with ASM and RMAN - Possible?

    We currently have a database ( Oracle 10g R1 ) on a Sun Solaris server that is NOT using ASM or RMAN. The database is about 300GB. We are getting a new server and we want to install Oracle 10g R2 with ASM and RMAN and migrate the database.
    I have seen the documentation on migrating non ASM to an ASM server but the methods all use RMAN. Is it possible to migrate to an ASM database without using RMAN? Would datapump import/export work if I created a new database on the new server with all the same tablespaces? Or, do I have to bite the bullet, install RMAN on the old server and do the backup?
    Thanks.

    If you're not using RMAN that doesn't mean you can't use it to perform a single backup, rman is contained in every oracle RDBMS installation version 10G or higher.
    this is only a sample of how to do it
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '<file_system_path>/%U.DBF';
    --first we allocate the channel default channel.
    RMAN>RUN
    ALLOCATE CHANNEL DEFAULTCHANNEL TYPE DISK;
    SHUTDOWN IMMEDIATE;
    STARTUP MOUNT;
    BACKUP DATABASE;
    SHUTDOWN
    }then once you have it, you can do what you want.
    It should also be possible to manually restore the database from the original datafiles but it's better to follow the solution involving RMAN.
    Bye Alessandro

  • Steps to clone database in other server with restore daily

    Hi,
    I think i know what is the steps but need a guru that give me the ok.
    I have been asked to perform a clone database (11.2.0.3 with ASM) in another server. The original database (call PROD) has full backup everyday that it automatically (with crontab and a script i guess) restore the second database. The problem i see its that the original database is a RAC (2 nodes) but the second database is standalone (call TEST)
    I think the steps are:
    1) create a standalone database in second server with same number of diskgroups and same directories
    2) copy full backup to TEST server.
    3) duplicate with rman:
    connect auxiliary sys/password@TEST
    connect target /
    startup auxiliary nomount;
    run {
    allocate auxiliary channel ch1 type disk;
    duplicate target database to 'TEST' nofilenamecheck;
    release channel ch1;
    4) copy PFILE from PROD and modify (like standalone database) at TEST
    5) startup nomount; --test database
    6) restore controlfile from '< backup piece name of controlfile auto backup copied in step 2>'; --at test database
    7) alter database mount; --test database
    8) recover, restore from full backup and open database-->
    run {
    allocate channel d1 device type disk format ' <path of the copied backup in step 2 >';
    set until sequence < sequence> thread < thread# >;
    restore database;
    recover database;
    SQL> alter database open resetlogs;
    9) like its a backup that has 2 undo tablespaces, should i drop 1?:
    SQL> drop tablespace UNDOTBS2 including contents and datafiles;
    All this steps at first time, are they right?, to do it automatically in the script i should use 2) 5) 6) 7) 8)?
    -- like the databases names are different, should i have any problem when restore de controlfile? if yes, how to avoid it?
    Thanks in advance and sorry for the inconveniences
    Edited by: Me_101 on 30-jul-2012 5:46

    Me_101 wrote:
    Hi,
    I think i know what is the steps but need a guru that give me the ok.
    I have been asked to perform a clone database (11.2.0.3 with ASM) in another server. The original database (call PROD) has full backup everyday that it automatically (with crontab and a script i guess)Why guess? Can't you look at the crontab schedule and see for yourself?
    restore the second database. The problem i see its that the original database is a RAC (2 nodes) but the second database is standalone (call TEST)
    That should not be an issue. Even with RAC there is still only a single database to duplicate.
    I think the steps are:
    1) create a standalone database in second server with same number of diskgroups and same directories
    2) copy full backup to TEST server.
    3) duplicate with rman:
    connect auxiliary sys/password@TEST
    connect target /
    startup auxiliary nomount;
    run {
    allocate auxiliary channel ch1 type disk;
    duplicate target database to 'TEST' nofilenamecheck;
    release channel ch1;
    4) copy PFILE from PROD and modify (like standalone database) at TEST
    5) startup nomount; --test database
    6) restore controlfile from '< backup piece name of controlfile auto backup copied in step 2>'; --at test database
    7) alter database mount; --test database
    8) recover, restore from full backup and open database-->
    run {
    allocate channel d1 device type disk format ' <path of the copied backup in step 2 >';
    set until sequence < sequence> thread < thread# >;
    restore database;
    recover database;
    SQL> alter database open resetlogs;
    9) like its a backup that has 2 undo tablespaces, should i drop 1?:
    SQL> drop tablespace UNDOTBS2 including contents and datafiles;
    All this steps at first time, are they right?, to do it automatically in the script i should use 2) 5) 6) 7) 8)?
    -- like the databases names are different, should i have any problem when restore de controlfile? if yes, how to avoid it?
    Thanks in advance and sorry for the inconveniences
    Edited by: Me_101 on 30-jul-2012 5:46Take a look at the DUPLICATE DATABASE command in rman. Key is to connect to the production db as target, duplicate databse as auxiliary
    connect catalog rman/cat@rmcat
    connect target sys/pswd@proddb
    connect auxiliary /
    run {                        
    duplicate target database to NEWDBSID;
    }                                        where NEWDBSID is the name of the new database
    Put together what you think is the correct procedure and give it a shot. If you have specific problems, bring them to the forum.

  • Execution timed out error when running opcagt command on linux server with agent 11.12.009 installed

    Hi,
    Can anyone help me in the below issue.
    we have a Linux server with agent version 11.12.009 installed on it. when I try running opcragt command on it through are management server it gives the output that all agent components are running.
    but when I check the agent status or version through opcagt command on it it gives below error:
    ERROR:   (depl-86) Unable to execute command 'opcagt' on node
                       (depl-176) Message returned from host           
    (xpl-117) Timeout occurred while waiting for data.
    Below are the error lines that I got from system.txt file of the server:
    0: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (conf-180) Could not create messenger for configuration server 'ovconfd' and register its methods with the messenger object.
    1: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (xpl-89) write(11)[012C5430] failed.
    2: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (RTL-28) No space left on device
    Could anyone please let me know what can be the issue in this.
    Thanks,
    Akansha

    ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [942],
    [ORA-00942: table or view does not exist
    ORA-01403: no data found
    ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
    ORA-06512: at line 36
    ORA-01403: no data foundWhat does this query return?
    SQL>  SELECT HOST, ACL
    FROM DBA_NETWORK_ACLS;Please see (Redefining a Network Access Control List Fails with ORA-1403 [ID 854083.1]).
    Thanks,
    Hussein

Maybe you are looking for