Devices for Lync Attendant?

Seems to be difficult to find data on what devices specifically work with the Lync Attendant.
Polycom CX200 seems to work, but I cannot get the CX600 to work. Presumably because it has Lync 2010 Phone edition and that must not integrate with the Lync Attendant Console.
I have come to the conclusion that the attendant will only work with a USB phone (essentially a glorified microphone & speaker).
Any location for resources related to this would be greatly appreciated!!
-Barry

A few data points:
CX600 on my system XP Pro SP3 all updates installed:
1. I get offered the opportunity to enter user credentials with the Lync Client, but not with the Lync Attendant.
2. If I login to the phone with the Lync client, I can then shutdown the Lync Client and startup the Lync Attendant, and it works together. I just can't login to the phone with the Lync Attendant.
3. Even while I am waiting to be prompted for credentials the Lync Attendant acknowledges the CX600 and allows you to use it and in fact defaults to it. It just does not prompt me for credentials so I can login.
The CX200:
1. It was working fine with OCS 2007 R2 Communicator/Attendant on the Windows 7 laptop (Home edition, this may be a problem?).
2. Went to Lync, worked for a few days, then lost Audio in the earpiece and speaker, but Mics work.
3. The system recognizes it as a USB Audio Device called a "Catalina". Lync as well. I don't know if there is any firmware in a CX200 I thought it was just a fancy USB Audio Device.
4. I switched to a different CX200, and it worked for a few days, then same behavior.
5. I then uninstalled the Lync Clients and re-installed the OCS 2007 R2 clients.
6. Now they don't work just like the Lync Clients don't work.
7. I have been trying to find anything in Windows 7 to see if something is muted, but can't find it. So, I figured I'll just let that person use a CX600, but she needs to use the Lync Attendant, but then I'm having problems logging in with that.
I will check the firware revisions on the CX600's and see if that needs an update.
Thanks for your reply!!!
-Barry

Similar Messages

Setting up a Test Voice VLAN for Lync 2013

I want to set up a second voice vlan to be a test vlan.
In the current situation the customer has voice and data running on vlan1. The customer insist on taking incremental steps to improve QoS. I have advocated separated vlans for voice and data. They just want to move everything (phase 1) to a different
vlan. They want to see how getting all traffic of vlan 1 will improve there performance. Again, I recommended the best practice, they want to try this approach first.
I am conducting a pilot test with just one cx600 IP phone. and a single switchport. I created a new vlan99 using VTP. I configured the switchports on the Cisco 2960-x switch as follows.
#switchport mode access
#switchport access vlan 99
The phone gets its correct vlan id, and pulls its IP from the correct dhcp scope. However the phone displays "connecting with the lync server" for a long time, then "connecting to download its certificates". This takes a long time then fails.
If I change the switchport back to vlan1 it works fine. What can be the problem? Does the vlan99 need to be defined on the lync server? How many vlans can be supported by Lync 2013?
Thank you,
gigiu

Did you set the VLAN Configuration for Lync Phone Edition?
You can check the following links:
http://blog.schertz.name/2011/01/manual-vlan-configuration-for-lync-phone-edition/
http://www.bricomp.com/blogs/post.cfm/dedicated-voice-vlan-for-lync-devices
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support

Lync Attendant Console crashes on startup.

Has anyone experienced the following? Windows 7 machine running Lync 2010 Attendant Console. After recent updates it crashes with the following message. Uninstalling and reinstalling has not helped.
Description:
Stopped working
Problem signature:
Problem Event Name:                        CLR20r3
Problem Signature 01:                       attendantconsole.exe
Problem Signature 02:                       4.0.7577.0
Problem Signature 03:                       4cc139bd
Problem Signature 04:                       PresentationFramework
Problem Signature 05:                       3.0.0.0
Problem Signature 06:                       5167b4d1
Problem Signature 07:                       6263
Problem Signature 08:                       e1
Problem Signature 09:                       System.Windows.Markup.XamlParse
OS Version:
6.1.7601.2.1.0.256.48
Locale ID:
1033
thanks.

Try to explore Control Panel\All Control Panel Items\System, click advanced system settings, select Advanced, click Settings under Performance, choose Data Execution Prevention, click “Turn on DEP for all programs and services except those I select”, add
Lync Attendant Executable file.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can you use different audio devices for different apps?

I've paired my iMac with a set of Bose Companion 20's - they connect via the headphone socket. I regard these as my default audio device. However, when I work from home I need to use Lync 2011 for Mac and want to be able to use a bluetooth headset for lync enterprise voice calls (my employers chosen platform). Is it possible to use my bluetooth headset for incoming / outgoing calls when using Lync but the Bose speakers for say internet radio? If this is possible, any guidance as how to configure would be much appreciated. Thanks in advance....

After going to a particular folder and selecting a view, click the little Action Gear and select "Show View Options" and at the top check the box "Always open in xxx view" where xxx will be the view you presently have selected.
Do not check the bottom box to use this as a default or else all folders will then open this way.
Message was edited by: nerowolfe

No audio device detected - Lync 2013 Client

I have a brand new Dell Latitude E6430 laptop running Windows 7 x64 SP1. I installed Office 2013, including the Lync 2013 client. We are running Lync 2013 server as well. I have connected three different audio devices.
Polycom CX600 phone.
Plantronics Bluetooth headset.
Logitech Video Camera (The video on this works with Lync but no audio)
I cannot get Lync to recognize either of them. I can see them as devices in Windows but within Lync I only get a screen that says "We didn't find an audio device, which you need for calling". Does anyone have any idea on how to resolve this issue?
It is driving me crazy. Especially since it worked perfectly on my old laptop that had the same OS and patches, etc...
Thanks for your help in advance.
Jamie

Had the same issue. For me it required uninstalling the Intel Widi device from device manager. I think it was titled "wiusb" or something similar. It was in its own group in device manager. After uninstalling that, Lync would then
recognize my mic/speakers again.
I had the exact same problem as everyone else. I purchased two Dell Latitude E6530 laptops with Windows 7 Pro 64-bit. Both laptops had the issue. I uninstalled the WIUSB devices, restarted Lync, and Lync suddenly is able to detect devices...
I refreshed device manager to see if the devices would auto-install again... but there weren't detected again.
William Christenson
This worked for me as well. Uninstalled the WIUSB and WIUSB Host Controller which was present under its own group, Exit Lync process and started again, it detected the Sound Devices again. Definitely a driver conflict but it was quick resolution to uninstall
and get it working. No other issues with user as far as another device stopped working due to uninstallation of the devices.
It does not look like any driver conflicts, all other software detects audio device perfectly (Skype, Recorder,softphone, Lync 2010 etc.), but only Lync 2013 client keeps saying ""we didn't find an audio device". it appears the faulty in Lync 2013 client

Certificate Requirement for Lync 2013 Standard Edition

I have successfully run the setup of lync 2013 standard edition now I am stuck due to certificates required for lync 2013. when I generate a csr. it show the subjected urls for that.
hostname.domain.com
sip.domain.com
diali.domain.com
meet.domain.com
admin.domain.com
lyncdiscover.domain.com
lyncdiscoverinternal.domain.com
im.domain.com (External URL)
so if I go for 3 party CA then I need 8 certicate only for internal lync. As I also need to connected federated partner and external user so I need Edge for again I need 3 more certificates
web.domain.com
a/v.domain.com
sip.domain.com
now when I go for these certificate it quit costly and I didn't understand why such certifcates required. can anyone help me to fix such requirement.
Or, what are the necessary url to which I buy 3 party CA rest leave as it is.
I also want to deploy Edge with single adopter as we have only one network so can anyone assist me to proceed it further.
Talha Faraz Malik

To save on the cost of your third party certificates, I would deploy an internal certificate authority to sign certificates for your internal front end. For your third party certificate, you would only need the SANs for the edge and for your
reverse proxy and as Edwin said, this can be a single cert with multiple SANs.
For example, for your edge you would need:
sip.domain.com
web.domain.com
You would not need A/V as this role does not require a SAN on your certificate. On the same certificate, which you could also use on your reverse proxy, you'd likely want the following FQDNs.
lyncdiscover.domain.com
im.domain.com (your external web services FQDN)
meet.domain.com
dialin.domain.com
You may also want to consider your internal web services FQDN and include the following so third party mobile devices can connect without needing a certificate installed:
im_internal.domain.com (your internal web services FQDN)
lyncdiscoverinternal.domain.com
I'm sure that's not entirely clear yet, so feel free to ask more questions or what the purpose of each is.
When you say Edge with a single adapter, you mean a single adapter in a DMZ or internal? You definably want two NICS, both in separate DMZs, but I've managed to get the edge working with a single adapter in a DMZ before. What you don't want is
the edge in your internal network.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

DNS records to be created for Lync deployment (Internal and External)

Hi There,
If I want the Lync server environment to work Internal as well from External in all the aspects. (auto-discover, meetings, AV conferencing,web conferencing, voice integration, mobility etc), please answer to the below questions and also their purpose please.
I'm not sure whether the answer varies for 2010 and 2013 version.
1. What are the Internal and External(public) DNS records to be created for the reverse proxy(assume i'm using TMG servers), and their purpose?
2. What are the Internal and External(public) DNS records to be created for Lync Edge server, and their purpose?

I'll try to answer as well.
1) For the reverse proxy, you'll need to publish the following:
External:
lyncdiscover.sipdomain.com (You'll need this record for every sip domain you have). This is for client autodiscover.
external web services FQDN (You'll need one of these per pool, you get to choose the name). This is for address book downloads, web conferencing, etc.
Meet.sipdomain.com (You can choose the name here, and have one per sip domain or one for the whole org). This is for web conferencing.
Dialin.sipdomain.com (You'll just need one here, it doesn't have to be dialin). This is for changing your conferencing/phone pin, resetting conference info, and general conferencing info.
For Lync 2013 only, you may want the Office Web Application server pool name as well for PowerPoint sharing. Lync 2010 doesn't use this.
Internal:
The external web services FQDN. You'll need this available internally through the reverse proxy so you can redirect requests on port 443 to port 4443. This will be used for mobile devices on WiFi.
2) For the Edge server:
Externally:
sip.sipdomain.com (you'll need one per sip domain) this is an autodiscover/multi use FQDN and should point to your access edge IP.
webedge.sipdomain.com (edge web conferencing, you can pick any name you like).
avedge.sipdomain.com (av edge, you can pick any name you like).
accessedge.sipdomain.com (you'll need a name for the access edge role, however you can just use sip.sipdomain.com and save a name in your certificate request).
Internally:
edgepool.sipdomain.com (you can pick any name you want, it's just the name assigned to the internal edge interface.
If you choose to have a single ip for the external edge, you can get away with just an access edge name and/or sip.sipdomain.com
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

I have three iPhone 4 models purchased in late 2010 that all share the same iTunes account (apps, music, etc), but I can only update the software on one of the three iPhones. What is the best solution to manage these devices for software updates, apps?

I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?

I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?

I am using my Apple ID on multiple devices for other people. How can I make icloud work only for my devices?

I am using my Apple ID on multiple devices for other people in my family and now I am getting a new iphone and want to take only the information on my old iphone to the new one without the information on the other devices using the same account. Is there a way to do that?
Also, for the future can I use multiple addresses and apple IDs for the same credit card information?
Thanks in advance,
Marian

Ok, so you want to remove data (contacts, bookmarks, calendar etc) from other users from your iCloud/Apple ID?
If you want to use your ID for your family because it is the account everybody uses to buy stuff then you only need to ensure that your apple ID is set up in the store (settings-store) and then the users of each device and put their own apple ID in icloud/message/facetime/etc.
To set up your device, in my opinion, it is best to back up to itunes, and then plug your new device into itunes and "set up as ..." and select the backup from your device. This will import all your data/settings and your new device will be set up just like your old one.
I am not certain about using the same payment method for more than one account.

I have 1Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both those devices use different Apple ID's than the Mac does? As in can I set up 'find device' for my husband's iPhone and my daughters iPad?

I have 1 Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both of these devices use different Apple ID's than the Mac does? As in, can I set up 'find my "device"' for my husband's iPhone and my daughters iPad?

Welcome to the Apple Community.
No, but you can log into any of their accounts on your computer at iCloud.com and see their devices.

I have multiple computers and iPhones and now iTunes will not allow my wife to load applications or use her own iTunes playlists. How can I setup each device for each user correctly?

We have multiple computers and iPhone devices which I have passed on to other family members, such as my wife. Now she is not able to load apps to her devices, eventhough it appear she is logged into her own iTunes account. How can I setup iTunes correctly on each device? Currently, there is one PC and one Mac laptop and we each have iPhones, with one other family member not able to use his 'passed-down' device for iTunes, also.

Hello dal1820
Check out the article below on how to use multiple devices with one computer. The main idea that I want to point out is to have different users for each person as it is the easy way to make sure that no issue happen when syncing.
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
-Norm G.

HT1660 Can I create a 2nd iTunes account on one PC that caters for two seperate devices for different people?

Can I create a 2nd iTunes account on one PC that caters for two seperate devices for different people?

For what reason would you do that?
Simply connect the device, select the content desired to sync and sync.
iTunes remembers the sync profile per device.

I have a new computer and I want to make it my home device for I tunes. I have home sharing, and all of the music and files are on the new computer. Now what do I do to make the new computer the home computer for Itunes?

I have a new computer and I want to make it my home device for I tunes. I have home sharing, and all of the music and files are on the new computer. Now what do I do to make the new computer the home computer for Itunes?

The computer (windows platform) where I initially began using Itunes has four other computers/devices that are shared with it. All four of the other computers show up in my account, and can be managed. Or I can remove them. But on the new computer that I want to be my base computer (home if you will). The computer I want it to replace, when ITunes is open, has a tool bar, with various functions. All of the other devices are linked to that computer in ITunes, under Home SHaring. The new computer, shows the downloads via Home Sharing, but it does not show/have any tool bar.
I want to activate the new computer to be the computer via ITunes where all of the devices are linked to it as the base for ITunes. And, I don't know how to make that happen.
I hope that makes sense.

Can I use a MIDI keyboard as an input device for a software instrument?

I have a Casio CTK-2100 that I am currently playing around with in Logic Pro 9. It can record and playback the different instruments fine using MIDI tracks. But I was wondering if it is possible to use the keyboard as an input device for a software instrument instead of the "Step Input Keyboard".
Is it? If so, how do I set it up?

Yes, the terminology can be a bear, many, many years ago when I started using Logic the manuals were written completely by the programmers, while they were quite humorous in places the were also really hard to understand so I learned/realized.. you can't really do anything so wrong it's going to destroy your computer so why not go ahead and experiment. I learned the basics of Logic without a manual, months later when I went back to find some some details I could figure out the manual made a lot more sense.
Logic has been somewhat Appleized but it's not really an Apple program, it was purchased almost as developed as it is now... a lot of the additions a fluff to make it easier to understand for new users while at the same time there are some real improvements.
This is personal opinion: With all of the forums/online tutorials...etc...etc. It seems users are learning (but not understanding) the same things, plus everyone wants to use it right away so nobody takes a deep breath and investigates on their own. Logic is a deep, deep program, while learning don't be afraid to go off on a tangent and explore the program without any other input, it can actually be inspirational. One other thing good about the manual or "Online Help", in looking up a function you will invariably come across a related concept that will provide further insight.
And..... have fun.

Devices for Lync Attendant?

Similar Messages

Maybe you are looking for