DHCP from OS X to Mandrake Linux

Hi,
I have 2 networks, one using a Mandrake Linux ISC DHCP V3.03 Server and the other a Thomson SpeedTouch Router. If I connect any of my OS X machines to the SpeedTouch network they receive DHCP address. If I connect to the Linux Server network they always get an autoconfigure address. I can look at the Linux server log and I can see the DHCP server offering IP addresses to the OS X machine but the addresses are never acknowledged:
Mar 30 00:21:22 gateway dhcpd: DHCPDISCOVER from 00:03:93:ed:d9:96 (merlin) via eth1
Mar 30 00:21:23 gateway dhcpd: DHCPOFFER on 192.168.1.124 to 00:03:93:ed:d9:96 (merlin) via eth1
Mar 30 00:21:30 gateway dhcpd: DHCPDISCOVER from 00:03:93:ed:d9:96 (merlin) via eth1
Mar 30 00:21:30 gateway dhcpd: DHCPOFFER on 192.168.1.124 to 00:03:93:ed:d9:96 (merlin) via eth1
Mar 30 00:21:32 gateway dhcpd: DHCPREQUEST for 192.168.1.66 from 00:03:93:ed:d9:96 via eth1: unknown lease 192.168.1.66.
Everything else in my home from Tivo to CISCO IP phone to windows laptops to Squeezeboxes all happily get addresses from the Linux DHCP server.
I can see discussions on earlier threads about similar problems but could not see a resolution.
Your help would be appreciated.
C.

The Mandrake box is connected to another router on a separate ISP line. ETH1 is the only active network interface on the box ETH0 is disconnected. There is no IPTABLES on the Mandrake setup the firewall is handled by the router. DHCP server on router is disabled and Mandrake provides DHCP/DNS for the whole network.
I modified the configuration slightly recently to make the DHCP server Authoritative for the network and to NACK addresses coming from the other network. When I switch from the ROUTER network to the Mandrake network I can now see a NACK being sent for the 192.168.1.64 address.
In desperation I have set my MacBook to DHCP with Static IP address in Network setup and this seems to work, getting the gateway from the DHCP server.
C.

Similar Messages

Mandrake Linux 8.0 - can't get Oracle Universal Installer to run

Hi all.
I'm having trouble getting Oracle's Universal Installer to run.
I'm trying to become DBA certified, so I went and purchased
(among
other materials) a book titled "Oracle8i for LINUX Starter Kit",
authored by Steve Bobrowski, published by Oracle Press / Osborne
McGraw-Hill, ISBN 0-07-212442-3.
The book includes a CD-ROM with Oracle8i Enterprise Edition,
Release 2, version 8.1.6 for LINUX.
I'm running an Intel P-III 500 MHz with 512MB RAM, 30GB hard disk
exclusively configured for Linux (no other O/S on it) and Oracle
(so LOTS of hard disk space is available), Matrox Millennium G400
video card (32MB).
My hardware exceeds all requirements listed in aforementioned
book, and also in Oracle's own documentation (from their web
site).
I'm running Mandrake's Linux 8.0, PowerPack Edition, with:
kernel = 2.4.3
XFree 4.0.3 (and I've also tried 3.3.6, with identical results
to those listed below)
glibc 2.2.2
I've followed the book's instructions to the letter, and set up
the environment variables, oracle user, and subdirectories as
required.
So far, so good.
OK. Now, here's where the problem appears:
I log in as the oracle user, and try to start the Oracle
Universal Installer (following the instructions in the book)
as follows:
cd /mnt/cdrom
./runInstaller
The computer tries to do some stuff, then spews the information
listed at the bottom of this posting to the screen. I press
<ENTER> after "OK" and get dumped back to the bash prompt.
That's it. I can't go any further. No Oracle Universal
Installer.
By the way, I've also downloaded Oracle8i Enterprise Edition
Release 3, version 8.1.7 from Oracle's website, and tried to
install that, too. Exactly same results.
The nice folks at Oracle have politely told me to get lost,
and not bug them for unpaid support.
I'd really like to get this stuff up and running, so I can
start studying and practicing for DBA, but I need help 'cause
this problem is beyond me.
So... can anyone help??
Thanks in advance.
[email protected]
[email protected]
=================================================================
=========
Here's what shows up when I try to start the Oracle Universal
Installer:
[oracle@localhost cdrom]$ ./runInstaller
[oracle@localhost cdrom]$ Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait...
SIGSEGV received at bfffedac
in /mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/E
xpanded/linux/lib/linux/native_threads/libjava.so. Processing
terminated
Sat Sep 29 12:58:56 2001
jre full version "JDK 1.1.8 IBM build l118-20000429 (JIT
enabled: jitc)"
Operating Environment
Host : localhost.localdomain.localdomain
OS Level : 2.4.3-20mdk.#1 Sun Apr 15 23:03:10 CEST 2001
glibc Version : 2.2.2
No. of Procs : 1
Memory Info:
total: used: free: shared: buffers: cached:
     Mem: 525901824 116862976 409038848 0 6377472
61140992
     Swap: 1069244416 0 1069244416
     MemTotal: 513576 kB
     MemFree: 399452 kB
     MemShared: 0 kB
     Buffers: 6228 kB
     Cached: 59708 kB
     Active: 63740 kB
     Inact_dirty: 2196 kB
     Inact_clean: 0 kB
     Inact_target: 1072 kB
     HighTotal: 0 kB
     HighFree: 0 kB
     LowTotal: 513576 kB
     LowFree: 399452 kB
     SwapTotal: 1044184 kB
     SwapFree: 1044184 kB
     User Limits (in bytes except for NOFILE and NPROC) -
     RLIMIT_FSIZE : infinity
     RLIMIT_DATA : infinity
     RLIMIT_STACK : 2093056
     RLIMIT_CORE : 0
     RLIMIT_NOFILE : 1024
     RLIMIT_NPROC : 16383
Application Environment
Signal Handlers -
SIGQUIT : ignored
SIGILL : sysThreadIDump (libjava.so)
SIGABRT : sysThreadIDump (libjava.so)
SIGFPE : sysThreadIDump (libjava.so)
SIGBUS : sysThreadIDump (libjava.so)
SIGSEGV : sysThreadIDump (libjava.so)
SIGPIPE : ignored
SIGUSR1 : doSuspendLoop (libjava.so)
Environment Variables -
PWD=/mnt/cdrom/install
LTDL_LIBRARY_PATH=/usr/lib
ORACLE_SID=oralin
TMPDIR=/usr/oracle/tmp
XAUTHORITY=/usr/oracle/.Xauthority
mc=
LC_MESSAGES=en_US
HOSTNAME=localhost.localdomain
LD_LIBRARY_PATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/
1/DataFiles/Expanded/linux/lib/linux/native_threads:/lib:/usr/lib
:/usr/lib
NLSPATH=/usr/share/locale/%l/%N
CLASSPATH=/usr/oracle/tmp/OraInstall:../stage/Components/oracle.s
wd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/OraInstaller.jar:../s
tage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/l
ib/InstImages.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/
1/DataFiles/Expanded/lib/InstHelp.jar:../stage/Components/oracle.
swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/oracleice.jar:../sta
ge/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib
/help.jar:../stage/Components/oracle.swd.oui/1.7.0.18.0A/1/DataFi
les/Expanded/lib/ewt.jar:../stage/Components/oracle.swd.oui/1.7.0
.18.0A/1/DataFiles/Expanded/lib/xmlparser.jar:../stage/Components
/oracle.swd.oui/1.7.0.18.0A/1/DataFiles/Expanded/lib/swingaccess.
jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/
Expanded/linux/lib/rt.jar:/mnt/cdrom/stage/Components/oracle.swd.
jre/1.1.8/1/DataFiles/Expanded/linux/lib/i18n.jar:/mnt/cdrom/stag
e/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expanded/linux/lib/
math.jar:/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataF
iles/Expanded/linux/lib/classes.zip
LESSKEY=/etc/.less
LANGUAGE=en_US:en
LESSOPEN=|/usr/bin/lesspipe.sh %s
BROWSER=kfmclient openProfile webbrowsing
LESS=-MM
USER=oracle
LC_TIME=en_US
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;3
3;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;
32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.tar=01;31:*.
tgz=01;31:*.tbz2=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lzh=
01;31:*.lha=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz
2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.jpg=01;35:*.jpeg=01;3
5:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.t
if=01;35:*.tiff=01;35:
THREADS_TYPE=native_threads
MACHTYPE=i586-mandrake-linux-gnu
KDE_MULTIHEAD=f
KDE_MULTIHEAD=false
HELP_BROWSER=kfmclient openProfile webbrowsing
THREADS_FLAG=native
MAIL=/var/spool/mail/oracle
INPUTRC=/etc/inputrc
GTK_RC_FILES=/etc/gtk/gtkrc:/usr/oracle/.gtkrc
XMODIFIERS=@im=none
LANG=en
JAVA_HOME=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/Data
Files/Expanded/linux
ORACLE_BASE=/usr/oraInventory
LC_NUMERIC=en_US
COLORTERM=
ORACLE_HOME=/usr/oracle
TMP=/usr/oracle/tmp
DISPLAY=localhost:0.0
LOGNAME=oracle
SHLVL=3
LC_CTYPE=en_US
SESSION_MANAGER=local/localhost.localdomain:/tmp/.ICE-
unix/1074
SHELL=/bin/bash
HOSTTYPE=i586
QT_XFT=0
OSTYPE=linux-gnu
HISTSIZE=1000
HOME=/usr/oracle
TERM=xterm
PATH=/bin:/usr/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/u
sr/X11R6/bin:/usr/games:/usr/oracle/bin
SECURE_LEVEL=3
LC_MONETARY=en_US
RPM_INSTALL_LANG=en_US:en
LC_COLLATE=en_US
LIBPATH=/mnt/cdrom/stage/Components/oracle.swd.jre/1.1.8/1/DataFi
les/Expanded/linux/lib/linux/native_threads
Libraries Loaded by the JVM
<main>
libjitc.so
libzip.so
Current Thread Details
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf764 used
(128932) free(-12196)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
Total Thread Count: 3
Active Thread Count: 3
JNI Thread Count: 0
Full thread dump:
"Async Garbage Collector" (TID:0x4032a238,
sys_thread_t:0x80dca78)
Native Thread State: ThreadID: 00000803 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf5ffb20 pointer bf5ff914 used
(524) free(116212)
----- Monitors held -----
----- Native stack -----
sysMonitorWait
sysThreadSleep
threadSleep
SetOrigArgs
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"Finalizer thread" (TID:0x4032a288, sys_thread_t:0x80dc7f8)
Native Thread State: ThreadID: 00000402 Reuse: 1 DAEMON
MONITOR WAIT
Native Stack Data : base: bf7ffb20 pointer bf7ff988 used
(408) free(116328)
----- Monitors held -----
----- Native stack -----
sysMonitorWait - waiting on Finalize me queue lock
finalizeOnExit
sysThread_shell
pthread_detach
__clone
------ Java stack ------ () prio=1
"main" (TID:0x4032a2d8, sys_thread_t:0x804de98)
Native Thread State: ThreadID: 00000400 Reuse: 1 USER
PRIMORDIAL RUNNING
Native Stack Data : base: bfffef08 pointer bffdf758 used
(128944) free(-12208)
----- Monitors held -----
----- Native stack -----
Java_java_lang_System_initProperties_stub
invokeNativeMethod
invokeLazyNativeMethod
__irem_trap6
------ Java stack ------ () prio=5 *current
thread*
java.lang.System.initializeSystemClass(System.java)
System Monitor Status
Thread queue lock: unowned.
Name and type hash table lock: unowned.
String intern lock: unowned.
JNI pinning lock: unowned.
JNI global reference lock: unowned.
Zip lock: unowned.
BinClass lock: unowned.
Class loading lock: unowned.
Java stack lock: unowned.
Code rewrite lock: unowned.
Heap Lock: unowned.
Has finalization queue lock: unowned.
Finalize me queue lock: unowned.
Integer lock access-lock: unowned.
Monitor cache lock: unowned.
Monitor registry: unowned.
Object Monitor Status
OK
[oracle@localhost cdrom]$
=================================================================
=========
[email protected]
[email protected]

I have Mandrake 8.0 on PII-600, 256 RAM. I used the downloaded
8.1.7. Edit JRE_LOCATION in Disk1/install/oraparam.ini to point
to your version of JRE 1.1.8 v3 (JRE from
http://www.backdown.org). Then try with NUMLOCK=OFF.
I just clicked the 'typical' installation. It failed at the end
and did not install the database manager. The error message was:
SIGGEV received at bfffea90 in
/u01/app/oracle/jre/1.1.8/lib/linux/native_threads/libjava.so
Process terminated
Writing stack trace to javacore30299.txt... OK
/u01/app/oracle/product/8.1.7/bin/dbassist: line 103: 30229
Segmentation fault $JRE_EXEC -Duser.dir=$USER_DIR -classpath
$CLASSPATH DBCreateWizard $ARGUMENTS
If you get beyond this point, let me know. Good luck!

Oracle8i Release 2 (8.1.6) on Mandrake Linux 7.1

I am trying to install Oracle8i R2 on Linux Mandrake. I've got the Oracle8i EE CD. I have followed the pre-installation steps of creating the groups, user and updating the .bash_profile file for "oracle" user with all the env. variables. After, I execute runInstaller from the CD, I get the Universal Installer Welcome screen. Mouse clicks on About Oracle and Remove Installed products work fine and show message/dialog boxes. But Mouse clicks on the Help, Exit, Installed Products AND "NEXT" button have no effect. The screen remain their without taking to the next step of installation !!!
I have to exit the Universal installer using the Closing icon on the Window (top right corner).
Also, I tried "ps -ef" on the prompt after execting runInstaller. It shows around 8-10 process running under installer. Is there any known bug/issue for installter working on Mandrake linux ?
Any help/comments/assistance....?
Thanks and advance.
null

Hi Lloyd,
I have a HP Pavilion/733MHz/128MRAM Box with Mandrake 7.1 and Win98 dual boot setup.
you mentioned that u were able to install Mandrake and Oracle on a Compaq box. Did you try re-installing Linux and Oracle on the HP box. I havent received any reply. I will try some Linux forum to raise this question.
Do let me know if you come across any solution/workaround...
Best Regards,
-Sameer Rao
<[email protected]>
null

Java(TM) Plug-in 1.4.2_03 under Mandrake/Linux and Mozilla

I'm having problems getting applets to load/run using Mandrake/Linux 9.2 and Mozilla 1.6. Apparently the classes are failing to load.
about:plugins in Mozilla shows that it has the Java plugin loaded, but when I try to test it using one of the sample applets at http://java.sun.com/applets/jdk/1.4/demo/applets/Clock/example1.html, I get the errors shown below in the Java Console.
I have a link in my plugins directory linking to:
lrwxrwxrwx 1 tim tim 67 Jan 17 22:33 libjavaplugin_oji.so -> /usr/java/j2re1.4.2_03/plugin/i386/ns610-gcc32/libjavaplugin_oji.so*
I PRESUME I've got some sort of configuration error, but I'm unsure where to begin to look - any help will be greatly appreciated!
Tim
Java Console Error Message Log
Java(TM) Plug-in: Version 1.4.2_03
Using JRE version 1.4.2_03 Java HotSpot(TM) Client VM
User home directory = /home/tim
<snipped "help" reference message from console>
Stopping applet ...
Joining applet thread ...
Destroying applet ...
Disposing applet ...
Quiting applet ...
Joined applet thread ...
Finding information ...
Releasing classloader: sun.plugin.ClassLoaderInfo@110278e, refcount=0
Caching classloader: sun.plugin.ClassLoaderInfo@110278e
Current classloader cache size: 3
Done ...
setWindow: call before applet exists:16956179
Referencing classloader: sun.plugin.ClassLoaderInfo@110278e, refcount=1
setWindow: call before applet exists:16956179
setWindow: call before applet exists:16956179
Loading applet ...
Initializing applet ...
Starting applet ...
Connecting http://java.sun.com/applets/jdk/1.4/demo/applets/Clock/Clock.class with no proxy
Connecting http://java.sun.com/applets/jdk/1.4/demo/applets/Clock/Clock.class with cookie " "
Connecting http://java.sun.com/notfound.jsp?requrl=/applets/jdk/1.4/demo/applets/Clock/Clock.class&refurl=UserTypedURL with no proxy
Connecting http://java.sun.com/notfound.jsp?requrl=/applets/jdk/1.4/demo/applets/Clock/Clock.class&refurl=UserTypedURL with cookie " "
Connecting http://java.sun.com/applets/jdk/1.4/demo/applets/Clock/Clock/class.class with no proxy
Connecting http://java.sun.com/applets/jdk/1.4/demo/applets/Clock/Clock/class.class with cookie " "
Connecting http://java.sun.com/notfound.jsp?requrl=/applets/jdk/1.4/demo/applets/Clock/Clock/class.class&refurl=UserTypedURL with no proxy
Connecting http://java.sun.com/notfound.jsp?requrl=/applets/jdk/1.4/demo/applets/Clock/Clock/class.class&refurl=UserTypedURL with cookie " "
load: class Clock.class not found.
java.lang.ClassNotFoundException: Clock.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: http://java.sun.com/notfound.jsp?requrl=/applets/jdk/1.4/demo/applets/Clock/Clock/class.class&refurl=UserTypedURL
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
     at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
     at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
     at sun.plugin.cache.FileCache.get(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.connectWithCache(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception: java.lang.ClassNotFoundException: Clock.class

To determine if your browser can view applets, try
viewing the "Cubic" applet on the following page..
http://java.sun.com/docs/books/tutorial/2d/display/Cubi
.html
You will notice that you can manipulate the pattern of
the applet by dragging the colored squares. Thanks for the pointer - it does, indeed, work as expected.
It's a bummer that the "sample applets" are screwy, as that seems like a good place to go to confirm that you have everything configured right (well, it DID seem like a good place to go - it seems quite a bit less good now).
Thanks for the help,
Tim

Problem installing weblogic server 7.0 in Mandrake Linux 10.1

hi
i am very new to Mandrake Linux ..i have installed Mandrake Linux 10.1 in my machine ...the problem is that when i try i to install weblogic server 7.0 it gives some error
** Error during execution, error code = 11
my machine spec
* 512MB RAM
* 40GB HDD
* P4 2.8GHZ
can any one help me..
the weblogic server i downloaded from bea site its version is weblogic server 7.0 with jrockit (sp6)
regards
babu

Hi,
first of all, unfortunately, WebLogic Server is not supported under Mandrivia (use the right name ;-) ), so you should use Novell Suse or Redhat AS, check this list
Anyway, error code 11 should be related to permission issues, so you should check that the user you are using is allowed to write under the installation directory and under /var/log/
Could you kindly post the log messages?
Regards.
Antenore Gatta
Middleware Specialist
Hequa S.r.l
C.so Buenos Aires 77
20124 Milano
http://www.Hequa.it
Tel +39(0)267493078
Fax +39(0)267493079
Mobile +39 3481537897
______________________________________

Problem Installing oracle 9iAS in Mandrake Linux 8.1

1.When iam trying to install Oracle 9iAS in Mandrake linux 8.1 iam getting the
below error. Pls help me out.
A Initializing Java Virtual Machine from /tmp/OraInstall0/jre/bin/jre.
Please wait...
SIGSEGV received at bffff190
in /tmp/OraInstall0/jre/lib/linux/native_threads/libjava.so.
Processing terminated Writing stack trace to javacore1520.txt ... OK
2.Does Orale 9iAS have Orace Database Server

I don't really understand why you are using almost 6 years old distribution (release date 2002/09/30).
What's the sense? Time has changed and of course SW included in this distro has changed (significantly) and especially glibc.
10g R1 is certified for RH EL 2.1. When I compare version of packages (RH 8 vs RHEL 2.1) it could be possible (easily) to install on RH 8. For 10g R2 you need defintely upgrade at least glibc* packages.

BIOS 1.7 Boot issue Mandrake linux yes - Windows XP no

I flashed my bois to 1.7 last night. I redid the CMOS settings and my PC boots fine. It then goes first to lilo (with windows as the default boot) and then onto windows XP boot (which has 3 options effectively all the same, just different names - dont ask ).
If I select Linux rather then Windows at the Lilo prompt the PC boots into Mandrake Linux 32bit version 10 fine. If however I select windows, then all I get after the XP OS selection screen is a blank screen.
If I try to boot from my Windows XP CDRom, it gets as far a checking system configuration and then hangs.
Fashrecovery also seems to hang.
As far as I recall the bios falsh complete successfully using liveupdate.
Anyone any suggestions on how to resurrect XP.
Athlon 64 3000+
2x512MB A-Data PC3200 ram
2x Maxtor 120GB SATA (not in a raid)
1xMSI DVD -8 writer
1xHP 8100 CD R/w
Belkin wireless USB keyboard and mouse
Radeon 9700 pro graphics card
22A on +12V

Hello!
I do have exactly the same usb keyboard issue on my K8T Neo (BIOS 1.7), AND on the KT6V (BIOS 1.6) of my second system, and I also had to disable the usb legacy support stuff in order to make XP boot up again.
But ...
During POST the keyboard and mouse gets initialized and I'm able to trigger CMOS Setup as well as the Boot Menu or any other option available. If I press "F8" to call XP's boot menu it even works. The keyboard and mouse also works when I boot from the Ghost 2003 CD (IBM DOS).
I know this sounds a bit weird since legacy support is disabled, but it simply works as expected.
One thing I haven't tried out is if it still works with the flash recovery routine (CTRL+Home); but I think it won't.
Although I really like MSI's products (at least I own two MSI mainboards and two MSI FX graphic cards) it's a bit of shame that they doesn't resolve the countless little BIOS "bugs" - like the "NumLock" Problem with Linux - to the customers full satisfaction. :-(

Error message with install of Oracle 9.2 on Mandrake Linux 9.0

Hi,
I hope somebody can help with this. I'm getting an error message during the installation for oracle 9.2 on mandrake linux 9. An error get thrown saying the IP address of a host cannot be determined.
Here is what is in the log:
*** Database Configuration Page***
TitleLabel = Database Configuration
Prompt = Select a database suited to your needs.
ConfigList = General Purpose,Installs a pre-configured database optimized for general purpose usage,Transaction Processing,Installs a pre-configured database optimized for transaction processing,Data Warehouse,Installs a pre-configured database optimized for data warehousing,Customized,Allows you to create a customized database. This option takes longer than the pre-configured options,Software Only,Installs software only and does not create a database at this time,
Selection = s_cfgtyperet = General Purpose
Setting value of s_dbcaProgressOnly to -progress_only
Setting value of b_autoStartApache to true
Setting value of b_launchNETCA to true
Calling query netQueries2.2.0.7.0 getHostIPAddress
Query Exception: UnknownHostException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
Anyone know how to resolve this error and whether or not it is very critical to the oracle installation?
Cheers
Johnny

Hi johnny,
You should first check the hosts file to see if the correct hostname and the IP address are shown. You can also check if the "hostname" command returns the correct result. If everything looks good so far, then next check if command "nslookup" returns the correct IP address. If the nslookup <hostname> command returns error, you will need to talk to the Domain Name Server (DNS) administrator to correct this network configuration problem.
Yogi

Is there a way to prevent DHCP from egress per port via ACL?

Is there a way to prevent DHCP from egress per port via ACL?
i am running serveral SRW248G4's in a MDU enviroment. I need a way to not have dhcp from one customer to the other, however get mine through uplink port.
Any ideas?

i don't think that this would be possible. when you setup acl to prevent services (dhcp in your case), you would need to specify an ip or range of ip address. if computers is yet to receive an ip then it wont even communicate with the dhcp server.

Install fails for Creator on Mandrake Linux with AMD64

I tried to install the new version of Creator update 1 on my Mandrake Linux 64 bit version and it fails to find my JVM.
I'm able test my JVM by checking the version but it still fails.
I tried the -is:javahome option ---- no difference.
Tried installing the 32 bit version of JVM 1.5 update 7 does not make a difference with is option.
The installation of pervious version of 2004 creator works fine.
Any clue as to what might be the issue.
Any assitance on this matter will be greatly appreciated.

Can you post the install.log file under your installation directory? Also take a look at this page:
http://developers.sun.com/prodtech/javatools/jscreator/reference/faqs/index.jsp

Oracle Install on Mandrake Linux 9.1 (Dell Laptop 600)

I have a full install of Oracle 10G running on a Dell Laptop using Mandrake Linux 9.1:
First I did an install of the OS, I built the swap file to be 2GIGs, the /oracle partition as 5GIGS and the /home partition as 25GIGS.
I made sure to choose the Development packages and the Office packages, I did not choose any of the WEB and other stuff.
As root, edit the file /etc/sysctl.conf. Add the following lines to the end of the file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
As root, issue the following commands at a terminal:
groupadd oinstall
groupadd dba
useradd g oinstall G dba oracle
passwd oracle <supply new password>
You then need to set up the new users environment variables. Edit the file /home/oracle/.bashrc and add the following between the # User specific aliases and functions and the # Source global definitions lines. In Mandrake Linux all I did was edit the /etc/profile file and add the below at the end. This way all users get the added. Works like a charm.
ORACLE_SID=lx10g
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle/10g
PATH=$ORACLE_HOME/bin:$PATH:.
export ORACLE_SID ORACLE_BASE ORACLE_HOME PATH
You can choose what you like for the ORACLE_SID: it represents what you will eventually call your database.
Make install directories, In my case, for example, I did this:
mkdir /oracle
mkdir /oracle/10g
chown -R oracle:oinstall /oracle
First when you try to run the Universal Installer do the following:
./runInstaller -ignoreSysPrereqs (this gets you by the error on the OS)
Then just follow the normal screens and at the end you should have a complete system. There is a bug in the installer and you will need to re-run the ./runInstaller and selct just the ISQLPlus* and it will then only re-install this package. It seems it misses it during the initial install. I also suggest downloading the Compaign CD and installing the APACHE and HTMDB using the same as above when running the ./runInstaller as everything else is already setup.

check pre-requisites for a Linux OS here:
Installation Guide for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel and Sun Solaris Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Remember that the OS has to be certified to install
Oracle sucessfully.
Joel P�rez

Migrate Oracle Apps 11.5.10.2 from Sun solaris to RHE Linux 32 bit.

We are migrating the Oracle Apps 11.5.10.2 from Solaris two node to Linux two node including the database Oracle 10.2.04 64 bit.
Since the applications only support 32 bit we are not able to store CM tier in a 64 bit Linux so with this considerations we are going with the below plan.
1. Install RHEL 5 as a 32 bit for two nodes ( One for DB/CM and FORMS/WEB)
2. Migrate the applications and DB from Solaris to Linux as the same node configuration that is
Node A:
Oracle DB 10.2.0.4 64 bit ( SUN oS 10 64bit) -> Oracle 10.2.0.5 32bit (RHEL 5 32 bit)
Oracle Apps CM 11.5.10.2 (SUN OS 10 64bit) -> Oracle apps CM 32 bit(RHEL 5 32 bit)
Node B:
Oracle apps 11.5.10.2 forms (sun OS 10) -> Oracle apps 11.5.10.2 forms ( RHEL 5 32bit)
Oracle apps WEB 11.5.10.2 (SUN OS 10) -> Oracle apps WEB 11.5.10.2 ( RHEL 5 32 bit).
Question : 1. Did you see any snag on this kind of migration
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux

Hi,
1. Did you see any snag on this kind of migrationWhy would you downgrade the db from 64 bit to 32 bit. As 32 Bit has lot of memory limitations.
You could keep the database on 64 bit for linux too.
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux Please see
Note 238276.1 - Migrating to Linux with Oracle Applications Release 11i
Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2 [ID 369693.1]
10g Export/Import Process for Oracle Applications Release 11i [ID 331221.1]
10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
Notice to Oracle E-Business Suite Customers: Correction to Export/Import Notes [ID 1055539.1]
EBS 11i Export/Import Fails On Admsc1020.sql Due To Missing Catmgdidcode.sql [ID 804665.1]
Thanks
Edited by: EBSDBA on Oct 25, 2011 5:30 PM

Clients not getting DHCP from external server

Hi,
I have a 4402 (version 7.0.235) working with 10 units of 1121 APs connected to it. The WLC is not configured to work in LAG mode. Physical portt #1 is connected to the Main Switch (trunk). I have 3 WLAN mapped to 3 Different VLAN and Everything (security and internal, external DHCP) is working swell...
Now- I have connected Physical port #2 directly to an ADSL Router (giga port), Configured Port 2 as untaggedwith the proper IP details.
I have configured this interface to receive DHCP from the ADSL Router and for some reason, Clients are not getting addresses.
When I assign a Static address to my laptop I get internet access and all is nice. I tried configuring The WLC internal DHCP server (instead of the ADSL router) and that didn't help. It seems like a DHCP problem but I dont understand the source of the problem of think of the solution.
When turning off the proxy settings I noticed that it helped. Is there anything to do with that? The problem was that after a while the other WLANs starting causing DHCP issues as well.
What is supposed to be configured? Any Expert is the House?
I attached a crappy drawing..

Hi Scott,
Thanks for your answer.
So what you are basicly saying is that I have 2 choices: 1 - disable the Proxy option on the WLC and work with external DHCP servers (internal will not work when this is enabled). 2 - Enable the Proxy option and only work with the WLC internal DHCP.
I have installed many WLCs this way, having Different DHCP Servers (external and internal) for multiple WLANs.
What do you think may be different this time? The router that I am using isn't the most expencive but it is providing DHCP to other clients (wired client) with no problems.
Thanks!!!

Sun One / Win ME / Mandrake Linux

Okay, this is driving me nuts. I am running Windows ME on one partition on my box. I used to have forte installed a while ago, btu for some reason I got rid of it. Now I am doing something that I would like to use it as a resource for and I come to find out it is Sun One now. SO I dl it and I go to install and teh installer freezes while looking for J2SDK. So I uninstalled J2SDK and dl the most recent version and reinstalled it. Still does the same thing.
So here is my question: realizing that Sun one is not particularly supported on ME, is that what is causing the install to freeze? If not, do you know what the problem might be? And if Forte installed, why oh why wouldn't Sun One.
If ME is the problem, I have Mandrake Linux on another partition (Yeah, I'd love Red Hat, but it was free and I am broke, so it seemed like a good idea) and it seems that only Red hat is supported. Should I bother downloading and trying to install on Mandrake (I use KDE btw)?

Hi,
I'm running on Mandrake 9.0 without any problems.
There is one anoying issue and thet is that the icons deliverd is in .ico format and I can't figure out how to use them on KDE 3.0
regards birger....
Okay, this is driving me nuts. I am running Windows ME
on one partition on my box. I used to have forte
installed a while ago, btu for some reason I got rid
of it. Now I am doing something that I would like to
use it as a resource for and I come to find out it is
Sun One now. SO I dl it and I go to install and teh
installer freezes while looking for J2SDK. So I
uninstalled J2SDK and dl the most recent version and
reinstalled it. Still does the same thing.
So here is my question: realizing that Sun one is not
particularly supported on ME, is that what is causing
the install to freeze? If not, do you know what the
problem might be? And if Forte installed, why oh why
wouldn't Sun One.
If ME is the problem, I have Mandrake Linux on another
partition (Yeah, I'd love Red Hat, but it was free and
I am broke, so it seemed like a good idea) and it
seems that only Red hat is supported. Should I bother
downloading and trying to install on Mandrake (I use
KDE btw)?

I had migrated Oracle 10g database from Windows to Oracle 11g Linux

I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Please guide me where I have to begin (starting point) looking into it.
Some document stated gather system statistics. How to check system statistics is up to date
What are the crucial initialization parameter ?

Hi,
Let me just point you out to the documentation, which may concern you:
I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Managing Optimizer Statistics
How to check system statistics is up to date
Managing Optimizer Statistics
What are the crucial initialization parameter ?
Configuring a Database for Performance
Thanks &
Best Regards,

DHCP from OS X to Mandrake Linux

Similar Messages

Maybe you are looking for