DI Server Installation and connection

hello,
We've installed DI Server, started it, but the WSClient file comming with the installation doesn't work.
a) Is the IIS needed for the DIServer to work?
If not, what do I need to do to be able to connect to the DIServer. There's no WSDL file with the DIServer.
b) Do I need to create my own WSDL file and put it on a Web folder?
I say this because I'm trying to connect with PHP to the server and PEARClient from PHP needs an URL (normally the WSDL file) to connect. It's just too confusing and there is no much help in the documentation.
thanks and greetings,
Guillem Barnolas.
www.softime.es

Guillem,
You do need to install a web server such as IIS to utilize the DI Server.
The documentation that comes with the SAP Business One SDK on the DI Server gives you all of the requirements and installation steps as well as sample code. You may want to look at this in the SDK Help Center that is installed with the SDK.
Also, your question on the DI Server pertains more to the SAP Business One Discussion Forum. This forum is for individuals that are working with the SAP Business One Integration Technology.
HTH,
Eddy

Similar Messages

DI Server installation and connection with PHP

hello,
We've installed DI Server, started it, but the WSClient file comming with the installation doesn't work.
a) Is the IIS needed for the DIServer to work?
If not, what do I need to do to be able to connect to the DIServer. There's no WSDL file with the DIServer.
b) Do I need to create my own WSDL file and put it on a Web folder?
I say this because I'm trying to connect with PHP to the server and PEARClient from PHP needs an URL (normally the WSDL file) to connect. It's just too confusing and there is no much help in the documentation.
thanks and greetings,
Guillem Barnolas.
www.softime.es

DI server provides you a simple COM interface that
accepts SOAP commands and returns you SOAP reply.
The format of these SOAP messages is in the SDK
documentation.
You should build your own web infrastructure on
top of this mechanism.

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

Oracle 11g Server Installation and Configuration

Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank you

Hi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein

InDesign Server Installation and Configuration Guide

Hi everybody
I try to ask one silly Q.
Where can I get this document.
I found many references but no link :(

There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
http://www.adobe.com/devnet/indesign/
The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
Let me know if that helps, or you still need something else.
Regards,
Heath Lynn
Developer Technologies
Adobe Systems

Oract Tutor 14 Author server installation and Publisher Client-Server installation

hi all,
does any one know about the installation of Tutor Author 14 server version and how to setup Publisher Client-Server architecture??
please share any document or link that can guide with this..
thanks and regards,
SD

Hi,
are you on itanium or x86? Your log says, "inux_ia32_jrockit_160_14_R27.6.5-32_jdk.zip not found" that means you should have itanium.
Regards

Router installation and connection

From the beginning when I purchased the WRT54G years ago the installation CD never worked. I had to call tech support to walk me through on the phone (he admitted I could not install with the CD). Now when I crashed and lost or corrupted settings in my computer (XP) and there's no more warranty I have to use manual installation to reinstall. My question pertains to the step where I am supposed to "renew" my computer's ip address using the command function. If I go into command to change that ip address, won't that affect the dsl service my isp provides me, as well as internet access or programs installed on my computer? Why do I have to change the computer's ip address?
Solved!
Go to Solution.

Whats the OS installed on your computers?
Follow the steps bellow to change the wireless settings on your Router Manually..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now see if you can locate your Wireless Network and attempt to connect...

Standard Server installation while connected to Airport Extreme

Hi,
I'm an advanced Mac user but I'm very new to using Server and have a question about initial installation & setup. I've search for info about it here and elsewhere but can't find a definitive answer.
Here's the scenario...
I'm installing Server on a new Mac Pro that is connected by ethernet to a fairly new Airport Extreme. (The Airport Extreme already provides wireless access for our small office, as well as sharing a Xerox printer via Bonjour. All this works fine.) I'm opting to using the "Standard" configuration of Server during the installation. During the installation process, the installer asks for the password for the Airport Extreme and seems to adjust/confirm some settings on the Extreme. The installer gets DHCP info from the Extreme and seems to set up Server fine... That is, I get no error messages throughout the entire process and once done the Server can access the internet. Also, all clients in the office can bind to the Server without any error messages at all.
(For what it's worth, in the Airport Extreme's settings -viewed with Airport Utility- there is an IP reservation made automatically for the Server. I'm guessing this is part of what's happening during the installation as I didn't do it manually. Also, doing a Lookup in Network Utility with either the reserved IP address or Server name returns the other successfully.)
The problem arises when I try to setup a CalDAV account on a client's computer. I'm not sure exactly how it's supposed to work, but I keep getting error message after error message when trying to find the Server. I realize that this particular problem might be best dealt with in the iCal Server forum, but even before I get to that, I'd love to know...
*Must I assign a static IP manually to the Server during the installation process or is the installer getting/setting up the address it needs to have all the Standard services work properly?*
I'm hoping that someone here can answer this definitively.
Thanks!
-Neil

You won't actually connect using a IP address through the browser URL. I access my external from Finder, Open a new window, go up to Finder then preferences, click Sidebar the button at the top and make sure you have a checkmark under Devices for External disks. Then in your original finder window under shared you should see the name you gave your external drive or the original factory name. After that if you click it and have setup a password in Airport for the external drive it should prompt to connect or hit connect as and put in that password

Transporter - Basic installation and connection questions

We have never used or installed the Transporter before. We are currently using Tidal 5.3x and are upgrading a sandbox environment to 6.2. I have looked at all the transporter documentation I can find and am still missing some very basic questions - plus I cannot get the "help" option in transporter to work.
WHERE do you install the Transporter and why? CM Server? Master Server? Desktop? If it is on a server, then does the user that runs it need to remote the server in order to user transporter?
I have attempted to install on each of the above, but cannot establish a connection. When I click "test" I get error "Failed to Connect [Login failure with responseCode [404]]What should I be entering in each of the following Connections fields? My comments indicate what I have assumed/attempted to enter and received the error above.
Connection name - just a given name to a connection? aka TESSandboxMaster
Server Name - what server? master? Is there a specific format this needs to be in?
DSP/Plug in name - I found a dsp file on my CM Server named TES-6.0.dsp - should I put TES-6.0 here?
User - network user that is a Super user in Tidal? aka networkname\superuser?
pwd - windows pwd for that user?
Thank you for any help you can provide.

Hi Patricia,
1. The Transporter is installed on the Client Manager - the CM is essentially a web server to handle client requests, perform sacmd commands, and utility for transporting jobs from one environment to another. A Tidal user would have to be granted rights to Move Jobs to Production, and I believe Tidal user has to be able to sign on to the CM as well.
2. I've reviewed an older copy of the transporter user guide 6.1 provides instructions on how to complete those fields:
To create a connection: (on page 32)
In the Connection Name field, enter the name for the connection file.
In the Server Name field, enter the name of the Client Manager machine.
In the DSP/Plugin Name field, enter the master instance name.
The master instance name is the TES DSP or Plugin name. This is displayed from the Web UI in the Master Status pane.
In the Server Port field, enter the listening Web Service port used by the Tidal Web Client. The default is 8080 for non-secured connections and 8443 for secured connections.
In the User and Password fields, enter a valid Enterprise Scheduler user name and password.
Select the Secure HTTP option if you want to connect securely through the HTTPS protocol.
This option is enabled only if Transporter has been configured for secure
connections. Figure 8 is an example of Transporter not configured for secure
connections.
BR,
Derrick Au

How application know the Principal server down and connect to mirror server ?

I have setup the database mirroring for disaster recovery solution where we don't need the witness server for fail over.
But under high-availability mode, If the principal server fails, the mirror server automatically becomes the new principal server and recovers the principal database using a witness server. Now my question is how application server or client application knows
to connect the mirror server which is now the new principle server.
Do we need to handle any condition in connection string which is using in client application or any other way ?
If you think my suggestion is useful, please rate it as helpful.
If it has helped you to resolve the problem, please Mark it as Answer.
Varinder Sandhu www.varindersandhu.in

Check these articles. You basically set the failover partner .
http://msdn.microsoft.com/en-us/library/5h52hef8(v=vs.110).aspx
http://blogs.msdn.com/b/spike/archive/2010/12/08/clarification-on-the-failover-partner-in-the-connectionstring-in-database-mirror-setup.aspx
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Oracle 10g application server installation and configuration

Dear All,
i am going to install oracle 10g application server including forms & report services.
what is the latest version for oracle 10g application server so that i download and install the correct one.
please put URL to download the software .
Thanks & regards,
Sher khan

hi,
for forms and reports purpose you can download standalone oracle forms and reports (version 10.1.2.0.2) component.
If you want to upgrade it you can upgrade it to 10.1.2.3.0.
find url for the same :
http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html
i'll recommend you to use oracle fusion middleware 11g forms, reports,portal and discoverer component.
regards,
Ajinkya

Installation and Connection Error with Desktop Manager and Curve 3G

I just installed Desktop Manager 6.01 and then tried connecting my Curve 3G to the system using the accompanying USB cable.. But there was a connection error.. so i did a bit searching on the net and went to (http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB00125) which gave me a solution to install m\y driver.. But when i try to manually install my driver, it shows an error "THE SERVICE CANNOT BE STARTED, EITHER BECAUSE IT IS DISABLED OR IT HAS NO ENABLED DEVICES ASSOCIATED WITH IT" now the USB is working because my phone is being recognised by the laptop and moreover in the device manager od my Vista, Blackberry is being shown... I cn see in drivers that Drivers have been installed but the drive Information such as Version, date is not available and the driver is unsigned...
Can someone tell me what exactly might the problem?? any reply will be appreciated..

I encountered the same issue, Not sure if you'll have the same results, but all i did was enable windows updates, and did an automatic driver update from the web (as in from windows updates) and after a reboot, all was back to normal.
hope that helps,

BI installation and connection to DB

I'm installing BI standard edition 10g Release 2, which has discoverer plus. Do I have to install Oracle client on that machine to connect to database on another machine? Because I tried to use sqlplus in BI to connect to the database, but it always failed. I thinkI have the right tnsname.ora file. Thank you!
AnthonyJ

Anthony,
I think you had installed 10gAS for BI. This contains Discoverer Plus. This is true.After you installed BI, you said you are able to do tnsping right?? Then discoverer should work. But I have some doubt if you are using different tnsping bin.can you check tnsping path??
which tnsping
then check your path for tnsnames.ora.If both are under same OH, then it should work. Try checking sqlplus with another user name and password.
sqlplus abcd@<databasename>
Then give password.
This gets connected, you cna try from discoverer plsu screen. it will work.
Thanks,
Cherrish Vaidiyan

Problem in server installation

I am new to OMA-DM and I am trying to install dm-server on my windows 7 system. I have downloaded Funambol 3.5.2 version of dm-server.
JBOSS 5.1.0.GA and postgresql are already installed on my system and J2EE_HOME and JAVA_HOME path variables are correctly set.
while executing cd <DM-SERVER_HOME>\bin\install jboss32 ,I am getting the following error. My DM-SERVER_HOME is C:\Program Files\opt\Funambol\dm-server
BUILD FAILED
C:\Program Files\opt\Funambol\dm-server\install\install.xml:87: Directory C:\Program Files\opt\Funambol\dm-server\output creation was not successful for an unknown reason
If anyone has any clue on why the output directory is not being created, please reply. The help will be appreciated.

hi,
Can you share the path for "dm-server 3.6" and JBOSS5.1.0 which needs to be downloaded for DM-server installation and running.
Thanks

InDesign Server configuration and fonts

When you start multiple instances of InDesign Servers you specify the different configuration names.
Is it possible that 2 instances of InDesign Servers running on the same server with different configuration names have different fonts installed?
I.e. can I install some fonts of configuration level, not for the entire server?

There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
http://www.adobe.com/devnet/indesign/
The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
Let me know if that helps, or you still need something else.
Regards,
Heath Lynn
Developer Technologies
Adobe Systems

DI Server Installation and connection

Similar Messages

Maybe you are looking for