Diadem application errors causing programme crash
We are running Diadem version 9.1 and are experiencing a large number of software crashes. Diadem has gone down 5 times today.
Typical error message is as follows:
The instruction at "0x77f7d3d1" referenced memory at "0x08c1baf5" The memory could not be read.
The first location seems common to all crashes the second changes each time.
The only option is to terminate as debug just results in it terminating anyway!
It occurs primarily in the report window. Any ideas as this is frustrating to put it midly!
Thanks
Hello marine boy,
this is looking uncommon.
Is the error occuring if you are using some special script or doing some special operations in the program or is it completely coincidentally? Are other applications crashing as well?
Inexplainable crashes quite often are based on corrupt memory. Maybe there is a problem with your RAM chips. There have been a lot of articles about that in computer magazines. Very likely DIAdem is using more of the RAM than all your other applications do thus accessing the corrupt bits - that could explain if DIAdem was the only application that is crashing.
You can try the newest DIAdem 9.1 Service Pack 2. Baybe it improves the satbility but if it is due to your hardware, what I assume, it is very likely that it does not make a big difference.
Download the servicepack here: DIAdem 9.1 SP2
Mind that, it is a whole new installer - you need to deinstall previosly installed 9.1 versions before installing this one.
But try to replace the memory as well, or try the software on a different PC.
Hope this helps.
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany
Similar Messages
-
Ntdll.dll application error makes itunes crash
Itunes keeps crashing every 30 minutes to 2 hours since more than 2 years now (!!)
according to the event log of XP there's an application error in module ntdll.dll
I have searched the internet for quite some time for a fix for this problem but there doesn't seem to be a clear one.
Help would be really appreciated!
Message was edited by: marcbolan
Message was edited by: marcbolanOkay ... not the malware thing that was causing trouble at the beginning of the year. (On the other hand, as well as citing ntdll.dll, that used to always stop people from launching iTunes and quicktime.)
It's relatively rare to see ntdll.dll show up in this context (and probably even rarer to see it only cropping up sometimes), so we'll proceed on a basic principles troubleshooting basis.
ntdll.dll is one of the core Windows operating system files related to handling drivers, so we'd better check on driver, firmware and so forth.
If you've got a name-brand PC, check first at the Manufacturer's website for drivers, firmware and BIOS for your system. If you've added third-party components to the system since then, check for driver updates for those components at the component-manufacturer's website.
If you've got a custom/homw-built system, check at the manufacturer's webpages for drivers/firmware/BIOS for the various components. There's some advice in the following document:
[Updating the drivers on your Windows PC|http://support.apple.com/kb/HT1768]
If you update, does iTunes seem more stable for you? (A bit tricky to tell, of course, given that it doesn't happen right away. -
Firefox crashes or seizes up when there are too many tabs and applications open, and causes my computer to crash or seize up. I use task manager to close Firefox or I restart my computer. Then, when Firefox restarts again, it automatically re-opens all the tabs and applications that caused the computer to seize or crash in first place. This is a waste of my time. I want Firefox to reopen to my homepage even if it crashes. I am willing to lose information to have Firefox reopen to a low-memory homepage. How do I do this?
Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
* http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
See also:
* https://wiki.mozilla.org/Session_Restore#Preferences
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) -
DIAdem Application Error (mfc71u.dll)
Hi, I'm working with an application in DIAdem who analize some data that LABview acquire and save the result in one file ("BRAKE_#.TDM") every test.
I've got some error saving this files:
23 19:15:34 Error:
Error while executing "DATASAVE("Brake_1231")" command
Error type: ACCESS VIOLATION
Error address: 00009E81
Module name:kernel32.dll
24 19:15:34 Error:
Error in <Rumore.VBS> (Line: 234, Column: 5):
Error while executing "DATASAVE("Brake_1231")" command
Error type: ACCESS VIOLATION
Error address: 00009E81
Module name:kernel32.dll
25 19:16:08 Error:
Error while executing "" command
Error type: ACCESS VIOLATION
Error address: 000631BA
Module name:gfsdesk.DLL
Sometimes also DIAdem crash and in the EventViewer there are this errors (the PC where run the program is in spanish):
Aplicación con errores: diadem.exe, versión: 10.0.0.2658, módulo con error:
mfc71u.dll, versión 7.10.3077.0, dirección de error 0x00023fee.
or
Aplicación con errores: diadem.exe, versión: 10.0.0.2541, módulo con error:
mfc71u.dll, versión 7.10.3077.0, dirección de error 0x00023fee.
Someone can help me ?
ThanksHello MicheleS! Hello Brad!
In the past I ran several times into the same strange error messages. The DATASAVE AV was never the reason, but it was always the symptom for a corrupt memory content. In my case it was caused by extension DLLs (GPI) I used (and developed).
I recommend to find the reason for the 'mfc71u.dll' AV.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater? -
Help, ORA-07445 error causes oracle crash!!
hi guys
I met a big trouble, My oracle server always crashed since last week, Orace version is 10.2.0.1.0
When it crashed, the alert log recorded as blew:
{color:#ff0000}Fri Dec 05 15:38:25 2008
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Fri Dec 05 15:38:25 2008
Errors in file c:\oracle\product\10.2.0\admin\ppm\udump\ppm_ora_2884.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION|http://forums.oracle.com/forums/] [unable_to_trans_pc|http://forums.oracle.com/forums/] [PC:0x7D621F95|http://forums.oracle.com/forums/] [ADDR:0x55909090|http://forums.oracle.com/forums/] [UNABLE_TO_READ] [|http://forums.oracle.com/forums/]{color}
{color:#ff0000}Fri Dec 05 15:38:26 2008
Errors in file c:\oracle\product\10.2.0\admin\ppm\udump\ppm_ora_2884.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION|http://forums.oracle.com/forums/] [unable_to_trans_pc|http://forums.oracle.com/forums/] [PC:0x7D621F95|http://forums.oracle.com/forums/] [ADDR:0x55909090|http://forums.oracle.com/forums/] [UNABLE_TO_READ] [|http://forums.oracle.com/forums/]
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION|http://forums.oracle.com/forums/] [unable_to_trans_pc|http://forums.oracle.com/forums/] [PC:0x7D621F95|http://forums.oracle.com/forums/] [ADDR:0x55909090|http://forums.oracle.com/forums/] [UNABLE_TO_READ] [|http://forums.oracle.com/forums/]{color}
{color:#ff0000}Fri Dec 05 15:38:27 2008
Errors in file c:\oracle\product\10.2.0\admin\ppm\udump\ppm_ora_2884.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION|http://forums.oracle.com/forums/] [unable_to_trans_pc|http://forums.oracle.com/forums/] [PC:0x7D621F95|http://forums.oracle.com/forums/] [ADDR:0x55909090|http://forums.oracle.com/forums/] [UNABLE_TO_READ] [|http://forums.oracle.com/forums/]
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION|http://forums.oracle.com/forums/] [unable_to_trans_pc|http://forums.oracle.com/forums/] [PC:0x7D621F95|http://forums.oracle.com/forums/] [ADDR:0x55909090|http://forums.oracle.com/forums/] [UNABLE_TO_READ] [|http://forums.oracle.com/forums/]
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION|http://forums.oracle.com/forums/] [unable_to_trans_pc|http://forums.oracle.com/forums/] [PC:0x7D621F95|http://forums.oracle.com/forums/] [ADDR:0x55909090|http://forums.oracle.com/forums/] [UNABLE_TO_READ] [|http://forums.oracle.com/forums/]
....................(repeat the message)
{color}{color:#000000}Then I check the trc file, as blew:
{color}{color:#ff00ff}{color:#ff00ff}Dumping last 2 granules of Transferred Memory
Done Dumping transfer, resize ops and granules.
Dump event group for SESSION
Unable to dump event group - no PROCESS state objectDump event group for SYSTEM
*** 2008-12-05 15:38:53.725
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}ACCESS_VIOLATION{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}unable_to_trans_pc{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}PC:0x7D621F95{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}ADDR:0x55909090{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}UNABLE_TO_READ] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}ORA-07445: exception encountered: core dump {color}[{color:#ff00ff}ACCESS_VIOLATION{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}unable_to_trans_pc{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}PC:0x7D621F95{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}ADDR:0x55909090{color}|http://forums.oracle.com/forums/]{color:#ff00ff} {color}[{color:#ff00ff}UNABLE_TO_READ] [{color}|http://forums.oracle.com/forums/]
{color:#ff00ff}OR
Current SQL information unavailable - no session.
{color}This problem occurs no rule, When the oracle crashed,I need to restart the computer, then restart the oracle service. I am very depressed...
Are there any suggestion about the error? anything is appreciated !
Thanks a lot
Edited by: user10690772 on Dec 7, 2008 11:02 PM
Edited by: user10690772 on Dec 7, 2008 11:03 PMYou didn't mention your OS but check this note:
[Note:405904.1-Listener Crash on Windows 2003 and/or ORA-07445: Exception encountered: CORE Dump ACCESS_VIOLATION unable_to_trans_pc|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=405904.1]
If it looks like your issue, try Solution 2 as a workaround and see if something changed.
Aviad -
How to identify cause of crashes in Console
Hi. My MacBook Pro has locked up several times in the last few days. Is there a way I can look in Console (or somewhere else) to identify the cause of each crash?
I am not very familiar with Console. There is a CrashReporter file in Console, but it is empty. When I peruse the "All Messages" listing, it is mostly a bunch of gibberish to me. Any ideas what specifically to look, for example, for after I have performed a Force Quit on an application?
Thank youGo to developer.apple.com and register for a free membership. Then you can search for document number TN2123 that documents the CrashReporter. I'm afraid, however, that it won't be of much help. It's intended to be used in conjunction with a debugger to trace a problem in a program. Rarely will one see anything in a crash report that will prove helpful.
However, the console log can tell you what caused a lockup or at least what the last thing was that logged an entry before the lockup. You can also provide a more complete description of what exactly was going on when the machine locked up along with any additional information such as error messages. The CrashReporter will at least tell you what process crashed and the timestamp. Then use the timestamp to investigate what's entered in the console log.
Frequent crashes (not kernel panics) of programs that have not normally exhibited a problem may be caused by corrupted preference files or cache files. They can also be caused by font problems - corrupted fonts or duplicate fonts. If you've added fonts to your system then you might check that.
If specific applications are causing the crash and you've already tossed their preference files and any associated cache files but they are still acting up, then consider uninstalling them and then reinstalling. Be sure to fully uninstall the application:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.
It also doesn't hurt to repair your hard drive and permissions:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Message was edited by: Kappy -
Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
to svchost.exe and therefore is protected from being manually restarted.
I noticed the following errors when this occurs:
Log Name: Application
Source: Application Error
Date: 7/23/2013 4:35:26 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.xxx.xxx.net
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x46c
Faulting application start time: 0x01ce877f9476ac07
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
<EventRecordID>158950</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW19XM2.agency.nwie.net</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>46c</Data>
<Data>01ce877f9476ac07</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
</EventData>
</Event>
All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
about 5 months ago a similar error fired on a non-virtual machine:
Log Name: Application
Source: Application Error
Date: 2/27/2013 6:57:58 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: AAW29033
Description:
Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x6c0
Faulting application start time: 0x01ce14e1af313fd9
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
<EventRecordID>286291</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW29033</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe_gpsvc</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>6c0</Data>
<Data>01ce14e1af313fd9</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
</EventData>
</Event>
I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
the Group Policy Client service to stop?You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
**EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot. -
AR 9.X Crashing IE (6 and 7) when opening PDF with sw:iexplore - Application Error
The majority of my systems are having a problem with Acrobat Reader 9.0 and 9.1.
When they click on a PDF from within IE the browser crashes with the following error:
sw: iexplore.exe - Application Error
The instruction at '0x051251b6" referenced memory at '0x00000010". The memory could not be "read".
Running AR 8 causes no difficulty, however I have an organizational requirement to have addressed the in-the-wild vulnerability of AR by March 18th for 100% of my client systems. And Adobe is holding on to those versions until the 18th.
So I _have_ to install 9.1 on 300 systems in the next 36 hours.
If I take the check mark out of 'Display PDF in Browser' it works fine. The problem with this solution is that there are certain web sites and applications that departments here use which absolutely requires that the PDF be integrated within the browser - so taking Display PDF in Browser is not a universal solution.
I have tried the following key to no luck:
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\SOFTWARE\Adobe\Acrobat\Exe]
@="\"C:\\Program Files\\Adobe\\Reader 9.0\\Reader\\AcroRd32.exe\""
On a couple of machines opening up Reader and closing it first while having admin rights clears up the problem - but not for the majority of my systems.
I've tried repairs, reinstalls, full reloads and reboots to very little luck.
It's is for various PDF files from different sites, and it's the same ones that work for the small number of systems not experiencing a problem.
Any suggestions would be welcome.> Adobe is holding on to those versions until the 18th.
The 18th is tomorrow, so why not wait for it? -
JFileChooser causes "java.exe - Application Error"
Hi,
When I'm closing an JFileChooser dialog (by e.g. pressing ok or cancel) a second or so later my JVM terminates with the error message "java.exe - Application Error. The instruction at "0*6d0ea46e" referenced a memory at "0x00000000". The memory could not be "read". Click on OK to treminate the program".
I turned on verbose output from the JVM and the last printout was:
[Loaded javax.swing.Autoscroller from C:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar]
[Dynamic-linking native method sun.awt.windows.WComponentPeer.removeNativeDropTarget ... JNI]
result 1
[Dynamic-linking native method sun.awt.windows.WFramePeer.getState ... JNI]
[Loaded java.awt.EventDispatchThread$StopDispatchEvent from C:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar]
[Dynamic-linking native method sun.awt.windows.WToolkit.shutdown ... JNI]
No exception is shown.
I have uninstall all old JVMs and reinstalled JDK 5.0. This does not help.
This simple program causes the termination of the JVM:
public static void main(String[] args) {
System.out.println("0");
JFileChooser fileChooser = new JFileChooser();
System.out.println("1");
int result = -2;
try {
result = fileChooser.showOpenDialog(null);
} catch (HeadlessException e1) {
e1.printStackTrace();
System.out.println("result " + result);
try {
Thread.sleep(5000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("2");
I receive the printout "result" but not "2".
I appriciate any help!
BR
/MarcusNo, this is very bad. Any time you see a message like this mentioning a memory address, it means that java, not you, has crashed. There's no way for you to fix this. The only thing you can try is to work around it.
My suggestions:
1. Report it to Sun. Make sure you include your system info (processor, memory, computer manufacturer) and what version of java you're using
2. Try downloading and installing a different version of java -
Hello Microsoft Gurus!
One of the employees in my office is constantly having problems with Excel 2013 crashing while doing work. We even made him use the safe mode version of excel, but he still was getting crashes. I'll try to provide as much information as I can, and if there's
anything I need to do on my end, please let me know.
This is the message that pops up when his computer crashes:
"Do you want to send more information about the problem? Additonal details about what went wrong can help Microsoft create a solution"
Files that help describe the problem:
C:\Users\user\AppData\Local\Temp\29422974.cvr
C:\Users\user\AppData\Local\Temp\CVRFA9B.tmp.cvr
C:\Users\user\AppData\Local\Temp\WERF771.tmp.WERInternalMetadata.xml
C:\Users\user\AppData\Local\Temp\WERCA7.tmp.appcompat.txt
C:\Users\user\AppData\Local\Temp\WERCF6.tmp.mdmp
Upon looking at the Windows App Error Logs, this is what shows up.
Faulting application name: EXCEL.EXE, version: 15.0.4701.1001, time stamp: 0x54e3066c
Faulting module name: EXCEL.EXE, version: 15.0.4701.1001, time stamp: 0x54e3066c
Exception code: 0xc0000005
Fault offset: 0x00ac6660
Faulting process id: 0x21d4
Faulting application start time: 0x01d06c01fa2c79fe
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\EXCEL.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office15\EXCEL.EXE
Report Id: cb0a8ef3-d7f9-11e4-a4d2-80000b62e6e7
Log Name: Application
Source: Application Error
Event ID: 1000
Level: Error
User: N/A
Taks Category (100)
What additional information is needed to decipher what is causing this to break? I have already tried suggestions from other technet articles (disabling hardware acceleration, using only 2013 files, safe mode excel, repairing office 2013, uninstalling/reinstalling
office 2013, etc.). I even tried using Procmon to try to find what 'function' was causing excel to crash but it was way beyond my expertise level. Can someone please advise what to do?
Also (not sure if this is related or not) Excel opens up 'blank' when he opens any type of model (.xls, .xlsx) that no other user is experiencing (exactly same computer model, same install, etc.). All the toolbars are there, but no data can be seen. Only when
he double clicks the top to shrink/maximize the excel window does the data appear.
Thanks!
btw, this verification thing is pretty stupid, i now have to manually type in the messages instead of just putting a picture. ugh.Hi Bob,
As I said, with your event log messages the faulting module is EXCEL.EXE, I can get less useful information about your constantly crashes problem. Thus, I need you to collecting the app crash dump file.This articles teach you how to collect app crash dump
file:
http://blogs.technet.com/b/askperf/archive/2007/06/15/capturing-application-crash-dumps.aspx
https://support.microsoft.com/en-us/kb/927069/en-us
Enable app crash dump collection by copying following words into notepad, saving it as dump.reg and importing
it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\EXCEL.EXE]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Then, open Excel to
repro the issue. If crash issue appeared, please find the crashdump file under c:\.
You can try to analyze dump by yourself if you would like to：
How to analyze app crash dump file:
http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
Regard, -
PSE 11 - Organiser causes programme to crash.
Recently purchased and installed, but intermittent fault that opening Organiser causes programme to put up error message and close down. I can get in via Editor .exe and have tried the Organiser Manager 'repair' route, re-indexing etc. to no avail. Can I uninstall and then re-install PSE11 to see if that fixes the issue, or will that lose those photos I have already worked on? I am running Windows XP Service Pack3. This is a real problem which is stopping me from effectively using this software suite.
Are you using the auto-analyzer. That sometimes affects performance. If so try turning the process off and seeing if that makes any difference. Launch the Editor and on the menu click:
Edit >> Preferences >> Organize & Share
Click on Media Analysis then uncheck all the boxes and click OK.
-
System slowdown caused by Mail. Application error or worm???
Hi there!
After wondering for a long time why my system is gone so slowly (i never do a restart, just awake from sleep) i figured out that mail is the problem.
Problem is that just after starting mail the activity monitor shows a cpu usage of about 45%, but there is no process in the list causing it. also, the disk activity shows a strange write value. while doing nothing special, it says that there are about 275 kb/s written on the disk! the most strange thing is that this behaviour stays altough mail is closed. the only thing to stop that is to restart the system and NOT open the mail application.
the other strange thing is the behaviours of other apps after using mail. handbrake, for example, is multithreaded an uses about 180% of cpu. after opening mail, it just uses about 100%, as if it is ignoring the 2nd core in my iMac.
now i am wondering if this is just an application error that should be fixed REALLY fast (because mail is my favourite email-client), or, and that should warn all us mac-users, it is some kind of worm/virus/trojan. remember microsoft outlook express? its very similar to mail becaus its winxp's standard mail-app... and you all know how riskful it is...
would be nice if anyone could help me, since the problem is fixed i will use another mail-client and advise this to all that have noticed the same behaviourHi Herogen.
Verify/repair your disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
If the problem persist after having fixed all filesystem issues, and you suspect Spotlight has a bearing on it, you may try re-creating its database by typing the following command in Terminal:
sudo mdutil -E /
The -E option tells Spotlight to delete any already existing index info (so that it's rebuilt from scratch all over again), and the / at the end means "apply this command to the boot volume".
After entering the command in Terminal, you'll be prompted for your administrator password. Just type it blindly (you won't see any feedback of the keystrokes while you type it) and then press <Return>.
For best results, quit Mail and don't play too much with your disk while Spotlight does its job -- i.e. avoid files being created/modified/deleted, mail being downloaded, etc. -
Install Error: "Invocation of this Java Application has caused an InvocationTargetException"
Hi
I am installing Weblogic v 6.0 sp2 on Sun Solaris 8 on executing the command "
sh weblogic600sp2_sol.bin -i console" the installation starts and after selecting
the language as English, console displays the following error and the installation
stops, please advice
"Invocation of this Java Application has caused an InvocationTargetException.
This application will now exit. (LAX)
Stack Trace:
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
at java.util.StringTokenizer.<init>(StringTokenizer.java:138)
at com.zerog.ia.installer.steps.ChooseJavaVM.j([DashoPro-V1.2-120198])
at com.zerog.ia.installer.steps.ChooseJavaVM.c([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
GUI-"
Has someone faced similar problem before? I have also tried installing the WebLogic
Server 6.1 as well but I get the same error.
Thanks and Regards
Kapil Singh PawarHi.
What jdk version is currently installed on your solaris 8 machine? If it is not
already a 1.3.x version I suggest you install that first and put the bin directory in
your path. You might also check with Sun to see if there are any relevant OS patches
required by your jdk (or jdk 1.3.1) in order to run.
Regards,
Michael
Kapil Pawar wrote:
Hi
I am installing Weblogic v 6.0 sp2 on Sun Solaris 8 on executing the command "
sh weblogic600sp2_sol.bin -i console" the installation starts and after selecting
the language as English, console displays the following error and the installation
stops, please advice
"Invocation of this Java Application has caused an InvocationTargetException.
This application will now exit. (LAX)
Stack Trace:
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
at java.util.StringTokenizer.<init>(StringTokenizer.java:138)
at com.zerog.ia.installer.steps.ChooseJavaVM.j([DashoPro-V1.2-120198])
at com.zerog.ia.installer.steps.ChooseJavaVM.c([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
GUI-"
Has someone faced similar problem before? I have also tried installing the WebLogic
Server 6.1 as well but I get the same error.
Thanks and Regards
Kapil Singh Pawar--
Michael Young
Developer Relations Engineer
BEA Support -
WindowServer and other errors causing frequent system crashes MacPro
Many warnings and errors in Console associated with increasingly flakey behavior of Early 2008 Mac Pro running 10.9.2
I have run disk utility on boot drive and other internal and external HD and all is well. I have just reinstalled the OS. In searching through the Discussions, I thought that installed third party applications have causes system changes that affect system preformance. To investigate, I followed Linc Davis' suggestion and produced the following outputs from Setps 1 and 2 respectively. I do not use MacKeeper or Drive genius and have tried to remove previously. Likewise, I do not use AirParrot, EyeTV (left over from 2002??), MisFox, Growl, anything related to the Casio camera, or Lotus Notes.
STEP 1:
Boot Mode: Normal
Loaded extrinsic kernel extensions:
com.squirrels.driver.AirParrotSpeakers (1.8)
com.squirrels.airparrot.framebuffer (3)
Loaded extrinsic user agents:
com.c-command.SpamSieve.LaunchAgent
2BUA8C4S2C.com.agilebits.onepassword-osx-helper
com.hp.scanModule.12880.A0C6F176-0E27-4EBB-92FE-8BAB18501604
net.juniper.pulsetray
com.wacom.pentablet
com.adobe.CS5ServiceManager
com.zeobit.MacKeeper.Helper
com.spotify.webhelper
com.microsoft.SyncServicesAgent
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9
com.adobe.ARM.925793fb327152fd34795896fa1fb9ffa268b2a852256fe56609efa3
User cron tasks:
#SqzS VERSION = 1.0.0
#SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
#PLEASE DO NOT EDIT.
# Enc=1 Name="My Product Update Task" EvType1=1 EvType2=0 Sched=1
0 0 2 * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher " 2 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUal"
#SqzS END SYMANTEC CRON ENTRIES
Safari extensions:
Facebook Cleaner
1-ClickWeather
AdBlock
1Password
Restricted user files: 10155
Extrinsic loadable bundles:
/System/Library/Extensions/AirParrotDriver.kext
(com.squirrels.driver.AirParrotSpeakers)
/System/Library/Extensions/APExtFramebuffer.kext
(com.squirrels.airparrot.framebuffer)
/System/Library/Extensions/CiscoVPN.kext
(com.cisco.nke.ipsec)
/System/Library/Extensions/EyeTVCinergy450AudioBlock.kext
(com.elgato.driver.DontMatchCinergy450)
/System/Library/Extensions/EyeTVClassicDontSeize.kext
(com.elgato.eyetv.ClassicNotSeizeDriver)
/System/Library/Extensions/hp_qc_io_enabler.kext
(com.hp.hpio.hp_psa530_630_io_enabler)
/System/Library/Extensions/Pen Tablet.kext
(com.wacom.kext.pentablet)
/System/Library/Extensions/TabletDriverCFPlugin.bundle
(No bundle ID)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/InputManagers/iPLM/iPLM.bundle
(com.mac.bwebster.iPLM)
Library/Internet Plug-Ins/FacebookVideoCalling.bundle
(com.skype.FacebookVideoCalling)
Library/Internet Plug-Ins/fbplugin_1_0_3.plugin
(com.facebook.plugin)
Library/Internet Plug-Ins/PlayerPlugin.bundle
(com.nds.pcshow.player)
Library/Mail/Bundles/SpamSieve.mailbundle
(com.c-command.spamsieve.mailplugin)
Library/Mail/Bundles (Disabled 1)/SpamSieve.mailbundle
(com.c-command.spamsieve.mailplugin)
Library/Mail/Bundles (Disabled 2)/SpamSieve.mailbundle
(com.c-command.spamsieve.mailplugin)
Library/Mail/Bundles (Disabled 3)/SpamSieve.mailbundle
(com.c-command.spamsieve.mailplugin)
Library/PreferencePanes/MisFox.prefPane
(de.clauss-net.MisFox)
/Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
(info.emagic.driver.unitor)
/Library/Audio/Plug-Ins/HAL/Hear.plugin
(com.prosofteng.hear.plugin)
/Library/Audio/Plug-Ins/HAL/InstantOn.driver
(com.rogueamoeba.InstantOn.driver)
/Library/Extensions/AirParrotDriver.kext
(com.squirrels.driver.AirParrotSpeakers)
/Library/Extensions/APExtFramebuffer.kext
(com.squirrels.airparrot.framebuffer)
/Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle
(com.aladdinsys.mmenabler)
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
(com.adobe.acrobat.pdfviewer)
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
(com.citrix.citrixicaclientplugIn)
/Library/Internet Plug-Ins/Disabled Plug-Ins/Windows Media Plugin
(com.microsoft.WMP.defaultplugin)
/Library/Internet Plug-Ins/DRM Plugin.bundle
(com.microsoft.DRMPlugin)
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
(jp.co.canon.EPPEX Plugin)
/Library/Internet Plug-Ins/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
(net.telestream.wmv.plugin)
/Library/Internet Plug-Ins/Flip4Mac WMV Plugin.webplugin
(net.telestream.wmv.webplugin)
/Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
(com.Google.GoogleEarthPlugin.plugin)
/Library/Internet Plug-Ins/Java Applet.plugin
(File Doesn't Exist, Will Create: /Library/Internet Plug-Ins/Java Applet.plugin/Contents/Info.plist)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.oracle.java.JavaAppletPlugin)
/Library/Internet Plug-Ins/net.juniper.DSSafariExtensions.plugin
(net.juniper.DSSafariExtensions.plugin)
/Library/Internet Plug-Ins/OfficeLiveBrowserPlugin.plugin
(com.microsoft.officelive.browserplugin)
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
(com.microsoft.sharepoint.browserplugin)
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
(com.microsoft.sharepoint.webkitplugin)
/Library/Internet Plug-Ins/Silverlight.plugin
(com.microsoft.SilverlightPlugin)
/Library/Internet Plug-Ins/Unity Web Player.plugin
(com.unity.UnityWebPlayer)
/Library/Internet Plug-Ins/WacomNetscape.plugin
(com.wacom.tabletplugin)
/Library/Internet Plug-Ins/WacomSafari.plugin
(com.wacom.safaritabletplugin)
/Library/Internet Plug-Ins (Disabled)/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Mail/Bundles (Disabled)/OMiC.mailbundle
(com.restoroot.omic)
/Library/PreferencePanes/DejaVu.prefPane
(com.propaganda.DejaVuPref)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/PreferencePanes/Flip4Mac WMV.prefPane
(net.telestream.wmv.prefpane)
/Library/PreferencePanes/Growl.prefPane
(com.growl.prefpanel)
/Library/PreferencePanes/PenTablet.prefPane
(com.wacom.PenTabletSettingsPrefPane)
/Library/PreferencePanes/SymantecQuickMenu.prefPane
(com.symantec.quickmenu.prefpane)
/Library/PreferencePanes/SymAutoProtect.prefPane
(SymAutoProtect)
/Library/PreferencePanes/VersionCue.prefPane
(com.adobe.versionCue.VCPrefPane)
/Library/PreferencePanes/VersionCueCS3.prefPane
(com.adobe.versioncueCS3.VCPrefPane)
/Library/QuickLook/DICOMQuickLook.qlgenerator
(com.osirix.dicomQLgenerator)
/Library/QuickTime/CanonMJPEGAVI.component
(jp.co.canon.MJPEGAVIExporter)
/Library/QuickTime/CanonMJPEGAVIDec.component
(jp.co.canon.CanonMJPEGAVIDec)
/Library/QuickTime/CanonText.component
(jp.co.canon.Text)
/Library/QuickTime/CASIO AVI Importer.component
(com.CASIO.EXLIM.component)
/Library/QuickTime/DivX 6 Decoder.component
(com.DivXInc.DivXDecoder)
/Library/QuickTime/EyeTV MPEG Support.component
(com.elgato.mpegsupport)
/Library/ScriptingAdditions/Adobe Unit Types.osax
(No bundle ID)
/Library/Services/ScanService.service
(com.symantec.ScanService)
/Library/Spotlight/LotusNotesImporter.mdimporter
(com.ibm.lotus.notes.mdimporter)
/Library/Spotlight/Microsoft Entourage.mdimporter
(com.microsoft.entourageMDImporter)
Unsigned shared libraries:
/usr/lib/libsymsea.1.0.0.dylib
Font problems: 54
Library/LaunchAgents:
.DS_Store
com.adobe.ARM.925793fb327152fd34795896fa1fb9ffa268b2a852256fe56609efa3.plist
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
[email protected].plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.apple.SafariBookmarksSyncer.plist
com.c-command.SpamSieve.LaunchAgent.plist
com.microsoft.LaunchAgent.SyncServicesAgent.plist
com.spotify.webhelper.plist
com.zeobit.MacKeeper.Helper.plist
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS5ServiceManager.plist
com.hp.help.tocgenerator.plist
com.lexmark.bmlaunchd.plist
com.lexmark.bmspecificlaunchd.plist
com.lexmark.lexnetlaunchd.plist
com.lexmark.lxknetlaunchd.plist
com.oracle.java.Java-Updater.plist
com.symantec.quickmenu.application.plist
com.wacom.pentablet.plist
net.juniper.pulsetray.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.adobe.versioncueCS3.plist
com.apple.aelwriter.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.prosofteng.DriveGenius.locum.plist
gds_db.plist
net.juniper.AccessService.plist
net.juniper.UninstallPulse.plist
/Library/PrivateFrameworks:
SymAppKitAdditions.framework
SymBase.framework
SymIR.framework
SymScheduler.framework
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/StartupItems:
.FBCIndex
.FBCLockFolder
AdobeVersionCue
ProTec6b
STEP 2:
Loaded extrinsic daemons:
net.juniper.UninstallPulse
net.juniper.AccessService
com.microsoft.office.licensing.helper
com.adobe.versioncueCS3
com.adobe.SwitchBoard
com.adobe.fpsaud
Root cron tasks:
#SqzS VERSION = 1.0.0
#SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
#PLEASE DO NOT EDIT.
# Enc=1 Name=DefaultLiveUpdateSchedule EvType1=1 EvType2=1 Sched=5
19 */4 * * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" -u 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUal"
#SqzS END SYMANTEC CRON ENTRIESYou have at least partial installations of "MacKeeper" and "Norton Anti-Virus," which are both useless and harmful. You also have quite a few other third-party system modifications that might be useful but could also be harmful, especially if incomplete or outdated. Besides that, many files in your home folder have wrong permissions or are locked.
A.
This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
B.
The system is so heavily modified with third-party software that, instead of trying to remove the modifications piecemeal, you should erase the startup volume, reinstall OS X, and then go through the initial setup process, restoring only user data and settings from a backup — not applications or other files. This procedure will be easier than trying to clean up a messy system.
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups. If you upgraded from an older version of OS X, you'll need the Apple ID and password that you used, so make a note of those before you begin.
When you restart, you'll be prompted to go through the initial setup process in Setup Assistant. That’s when you transfer the data from a backup.
Select only users and Computer & Network Settings in the Setup Assistant dialog — not Applications or Other files and folders. Don't transfer the Guest account, if it was enabled.
After that, run Software Update.
If the problem is resolved after the clean installation, reinstall third-party software selectively. I can only suggest general guidelines. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are usually safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem.
I strongly recommend that you never reinstall commercial "anti-virus" products or "utilities," nor any software that changes the user interface or modifies the functions of built-in applications. If you do that, the problem is likely to recur.
Before installing any software, ask yourself the question: "Am I sure I know how to uninstall this without having to wipe the volume again?" If the answer is "no," stop.
Never install any third-party software unless you know how to uninstall it. -
A qualcuno è capitato che dopo aver elaborato alcune immagini NEF o anche JPG Photoshop non apre più immagini a causa di un errore del programma???
Dopo il messaggio chiudo Photoshop e al riavvio tutto funziona per un po', poi il problema si ripresenta.
AIUTOOOOOO!!!! (possibilmente in italiano).A couple of things to try
1) Reset the preferences by holding down alt-ctrl-shift on windows or cmd-opt-shift on mac when you start photoshop. It will ask if you want to reset the preferences.
2) Uninstall photoshop restart your computer then install photoshop.
One or the other should take care of it, if not let us know.
Maybe you are looking for
-
Hi Experts, I am having a little problem in uploading a file in a table File format is as follows weekly_eft_repo 1.0 Page: 1 C
-
Find the grand parent of child node
Hi gurus, I have a table with the following structure Supp_Num Parent_Num Inidicator 1 Null 0 2 1 1 3 2 1
-
I don't know why, but my iPhone cannot connect to the EDGE network. I have a very strong signal, and I can surf using my home wireless network. On the go, however, i cannot access things like youtube, and safari browser. I called AT&T about it... I t
-
Hi How to develop a java project in NWDS Thanks Hazrath
-
Left side menu missing in iPhoto
For some reason, the bar on the left side of iPhoto is no longer visible. This is where it shows all my folders, etc. I suspect it was some keyboard command that I inadvertently used. Any suggestions to get them back?