DIAdem create an user variable for Report

Hi,
I know that i can display in a DIAdem report some pre-defined DIAdem vairiable (such as CurrDate) using @@Variable@@.
I would like to create a DIAdem user variable (from a DIAdem script) to be used in DIAdem report.
1) I have created a variable in my script
Dim myvariable
myvariable = "hello"
2) I have run the scirpt
3) I have put @@myvariable@@ in a Text
But a error message appears : Variable is undefined : 'myvariable'
How could a create a user varaible to be displayed in my report?
Thank
Solved!
Go to Solution.

Hi malexman,
The other option is to create a global variable from a normal (non-user-command) VBScript. There are several ways to do this, but the one we instruct new users to implement is the "GlobalDim" command, like this:
GlobalDim "UserVariable"
UserVariable = "hello"
You will notice that after this short VBScript runs the "UserVariable" changes color to show that it has become a global variable-- at that point you can use it in REPORT (and everywhere else in DIAdem, thus the name "global" variable).
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

How to create a user parameter for a report

Hi,
I am writing a report in ORACLE 6.0, and I need to create a user
parameter for my report.
My database includes fields: item_id, item_cost, and item_desc.
What I want to do is: set up a user parameter for item_cost, and
the report will prompt the user to enter number into this
parameter, then the report will display item_id and item_desc
depending the user-entered item_cost.
thanks.
Jun

My SQL code is below:
select item_id, item_invo, item_desc
from tb_item
where item_invo=:p_1
but I got an error message:
REP-0788:Warning: The value of restricted LOV parameter p_1 is
not among the selectedble values.
Would you help me again? Thanks.
Jun

Is it possible to dynamically create a user variable at runtime from within a Widget?

I'm trying to develop a custom Interactive Widget. This widget will allow the user to take multiple attempts, and needs to store information about previously completed attempts so they can (hopefully) see their improvements over time.
I'm trying to figure out the best way to store the data about the previously completed attempts across multiple sessions in a LMS. It seems that the data stored in user variables is automatically stored/restored in suspend_data, which would be perfect. The issue is that I can't find a way to dynamically create a new user variable from within a Widget. It looks like I can only access user variables that the author has explicitly defined in the Captivate interface. I'd rather not have to force the author to define an empty User Variable that they'll never knowingly use, just to give the Widget a bucket to store its data.
Does anyone have any ideas for what might be the best way to accomplish this? I'd like to stick to standard, "approved" APIs as much as possible, but I'd be willing to bend some rules if necessary.
Thanks!

Ryan,
I assume you've asked this question here:
https://groups.google.com/forum/?fromgroups#!topic/elearning-technology-and-development/e5 vWZfJ6X8I
I asked a similar question here:
https://groups.google.com/forum/?fromgroups#!searchin/elearning-technology-and-development /leichliter/elearning-technology-and-development/Au88bu7LB5o/TC7xlo8iBpQJ
Philip gave you sound advice. You'll have to hijack/re-purpose the comments or the suspend data. I was successful in using SCORM comments in a Moodle system to store extra data I needed for a customer. It's not ideal, but it gets the job done. Here's a thread about that:
https://groups.google.com/forum/?fromgroups#!topic/elearning-technology-and-development/Yg YAMGfXQNw
If you use suspend data, you have to watch out for a few things:
1. It's base 64 encoded... so any data you append to what Captivate outputs will need to be in base 64 (that's a good practice anyway since the data has to be serialized).
2. On course re-entry, you'll need to capture the suspend data before it hits Cp to strip off / read your needed data. If the suspend data isn't in the format Cp expects, you'll get a nice white screen of death.
Ideally, it would be nice to be able to dynamically create user variables for purposes like this... and it's been requested in Cp 6.... we'll see if it gets added (not holding my breath). Until then, I'd use cmi.comments.
Jim Leichliter

User-exit for report RPCAIDP0 (tcode: PC00_M19_CAID)

Dear Gurus,
Does anyone know user-exits for report RPCAIDP0 (tcode: PC00_M19_CAID) ?
Thank you in advance,
PSC

Depends on what you want to do Priscilla, i have quite an experience with RPCAIDP0 report and it's not the easiest report to change the standard without copying to an customer report. Also, in the previous year, SAP changed the logic of the report quite a bit in order to have the same logic as in RPCIIDP0, so they created a class (CL_HR_PT_EMPLOYEE_TAX_DATA) in which they encapsulated all the data retrieval regarding payroll results, so it's not that dificult to enhance the class itself but it's a bit dificult to get the logic right away. I have done this for several clients, so if you can be more specific maybe i can help you.
Best regards.

How to create a 0FISCPER variable for [last period of current year]

Hello,
Can anybody tell me how to create a (exit) variable for the last period of the current year, based on 0FISCPER ?
Based on a single value, user entry variable based on 0FISCPER.
I did not find any standard (business content) variables for this.
Can anybody tell me whether the following alternative works:
variable 0P_BA102 (last period pervious year) with offset of +12
Kind regards.

Hi,
It should work.
You can refer to the following link:
http://help.sap.com/saphelp_sm32/helpdata/en/3f/89533e5ff4d064e10000000a114084/content.htm
Regards,
Amit

How to Create a selection variable for Fiscal period/year range

How to Create a selection variable for Fiscal period/year range. The idea is to filter the query results using a fiscal period/year range user input rather than a full fiscal year input.

Hi Priya,
Open the query in a query designer -> in the left hand side you would find the fiscal year period under the time dimension -> right click -> create variable -> create the variable.
The better option would be use any of the SAP provided variable. You would find them under the Fiscal year period in the left hand side in the query designer.
Bye
Dinesh

I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?

I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?

They can't. Which came first - the chicken or the egg? Actually, that's a bad comparison but a sync must come first.
The library is actually part of iTunes and it contains everything. iTunes is then configured so that you (or they) determine which portion of everything will be synced to each iPod (identified by a unique name, see below for an example of an iPod and an iPad). iTunes can't make that decision until AFTER it knows which iPods exist.
By the way, I (you, they) can very easily change the name of each device to whatever I (you, they) wish to call it.

HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT

Hy,
<b>HOW TO CREATE A USER-EXIT FOR MB31</b>
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.

Hi Rawat,
   You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name     Description
MBCF0002     Customer function exit: Segment text in material doc. item
MBCF0005     Material document item for goods receipt/issue slip
MBCF0006     Customer function for WBS element
MBCF0007     Customer function exit: Updating a reservation
MBCF0009     Filling the storage location field
MBCF0010     Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011     Read from RESB and RKPF for print list in MB26
MB_CF001     Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

User exits for report painter

Hi experts,
How can i find user exits for report painters?
Is it possible to search them for specific an library? I am searchinf them for enchancing PEP elements rreport painters.
Thank you for your time,
Artur.

No Reply, so I close.

How to create characterstic formula variable in reporting

how to create characterstic formula variable in reporting
tell me any one in steps
thanks

HI
Query Designer -- Select your Char -- Create Char Variable -- Processing type should be Replacment path =In the Replace Variable with drop down box, choose Attribute Value. In the Attribute drop down, select Characteristic Reference
http://help.sap.com/saphelp_nw70/helpdata/EN/03/6ba03cc24efd1de10000000a114084/frameset.htm
Hope it helps

Creating ABAP Unit Tests for Report Programs

How can we create ABAP unit test for report programs.
Please explain the steps?

Hi Devendra.
I would like to suggest some references which are as below:
[SAP HELP - Complete ABAP unit|http://help.sap.com/saphelp_nw04/helpdata/en/a2/8a1b602e858645b8aac1559b638ea4/frameset.htm]
[SDN - Reference for ABAP unit testing|about unit testing;
Hope that's usefull.
Good Luck & Regards.
Harsh Dave
Edited by: Harsh Dave on Jul 14, 2008 2:13 PM
Edited by: Harsh Dave on Jul 14, 2008 2:20 PM

Create unique user accounts for each Oracle process

hi,
Please tell me the command to create unique user accounts for each Oracle process
Thanks

create unique user accounts for each Oracle processWhat do you mean by unique user account for each oracle process ? Provide more information.
do you mean create oracle user?
create user <username> identified by <password> default tablespace <tablespace_name>;
-Anantha

How to create a user class for the customer realm

how can I create a User class for my custom security realm, please help me out. i am trying to access using the active directory server and iam unable to write a simple classs for this user, can anyone help me. iam a beginner, would appriciate if any one helps me.regardsbaba

Hi Rawat,
   You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name     Description
MBCF0002     Customer function exit: Segment text in material doc. item
MBCF0005     Material document item for goods receipt/issue slip
MBCF0006     Customer function for WBS element
MBCF0007     Customer function exit: Updating a reservation
MBCF0009     Filling the storage location field
MBCF0010     Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011     Read from RESB and RKPF for print list in MB26
MB_CF001     Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

How to create a custom variable for a Label?

i need my label to store a string variable in it, do you know i can create a custom variable for it.
i mean for example if it's name is "StoredString" i can access it in my code by "label1.StoredString" just like "Label1.text" or something like that.

Thanks for pvdg42's help.
Hi soorena12,
Based on your issue, I suggest you can try the pvdg42's suggestion check your issue in your side.
If it still could not help you solve this issue, I suggest you can tell me which kind of application you create the label in the VS IDE?
What language you use to create for your application?
If you have any update message about your issue, please tell us.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create unique user profiles for each separate session

Hi,
How can I configure TS environment so that each user (who logs onto Windows using the same generic Windows user ID) gets their own unique Windows user profile.
For example, imagine a scenario where the users are logging onto Windows using the shared user "SYSTEMAPP"
The intention is to configure the TS server's Windows, so that it creates unique user profiles for each separate session, for example:
- SYSTEMAPP
- SYSTEMAPP.000
- SYSTEMAPP.001
- SYSTEMAPP.002 (etc...)
The server version for TS is Windows Server 2012 and not joined to AD. User IDs are created at Local Users and Groups.
Kindly advise.

Hi Susie,
Just to illustrate my point further. Let's say a user logged into the server using user ID SYSTEMAPP for the first session. So, if
you browse the folders in the server, you'll be able to see this:
C:\Users\SYSTEMAPP
Then, another user logged into the same server as SYSTEMAPP user using other session. In this case, my intention is to configure the
server to create another unique user profile as below:
C:\Users\SYSTEMAPP.000
Subsequently, if more users logged in using the same account, the unique counter number will keep on adding...
C:\Users\SYSTEMAPP.001
C:\Users\SYSTEMAPP.002
C:\Users\SYSTEMAPP.003
Previously, I checked from my third party software vendor that this can be done but I still cracking my head on this which is why led me
to this forum.
Kindly advise.

DIAdem create an user variable for Report

Similar Messages

Maybe you are looking for