Did 10.8.2 update break bonjour?

Since updating to 10.8.2 on my two macbook pros, I have the same problems on each.
1. Airprint printers stop responding after an idle period (30 mins or so). Requires a reboot of router to access them again. I can access the printer admin web page just fine with Safari at all times.
2. Access to shares using Apple File Protocol over TCP/IP similarly cannot be accessed after an inactive period. They are visible in the Finder, but clicking on them brings up an error about being unable to connect. Accessing the shares via IP adress does work, however, and then re-enables browing in the Finder for a while.
Is this a bonjour problem? Any thoughts on troubleshooting?
Thanks

OK. I have a fix for you all that seems to work especially if you need Java 6u37 working on any computer Apple disabled it on. This will work best on 10.6 but can work on 10.7/10.8 as well.
Do not attempt this if you do not know what you are doing.
I will not be held responsible for your system if it stops working or you expose yourself to a virus. If you are a novice user, you attempt to do this, and something goes wrong, remember you were warned.
DO THIS AT YOUR OWN RISK:
Using whatever editor you want at command line as root or using sudo, you will need to edit:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta.p list
Change:
<key>JavaWebComponentVersionMinimum</key>
<string>1.6.0_37-b06-435</string>
To:
<key>JavaWebComponentVersionMinimum</key>
<string>1.6.0_37-b06-434</string>
Change:
<key>MinimumPlugInBundleVersion</key>
<string>1.7.11.22</string>
To:
<key>MinimumPlugInBundleVersion</key>
<string>1.7.11.21</string>
And best of all, change:
<key>LastModification</key>
<string>Thu, 31 Jan 2014 16:55:59 GMT</string>
To any date in the future. (Bad programming on Apple's part but repreive for those of us who have to support archaic Oracle based systems that won't work under Java 7+.) It won't update again until after the date you put in there.
DO NOT Delete any of the lines that have to do with version number because it will allow older versions of Java, which are not secure, to run. I would also not recommend that you change the date too far ahead if you are on 10.7/10.8 and are running Java 7 because the security holes in Java 7 are horrible.

Similar Messages

Did latest MAC OS update break connectaddin...?

Mac Snow leopard - since the latest update this week, connectaddin is not working.
Conference room is fine if I delete it - but if it installs (or if I install the newest version) then the room just locks up on on the little waiting to load windows and never finishes connecting.
Worked fine before this week.
Any one else see this?
Thanks
Paul

Hi, I am using Vista Ultima x64 and the same behavior is observable. The only changes to the system were update(s) in the last seven days. Yesterday I then noticed that loading the Connect Add-In PlugIn messes up the meeting room. All I can see is a little white window. Deinstalling the Connect Add-In allows at least to login to a meeting and participate as attendee. As soon as I try to share or broadcast content and therefore download and install the Add-In again, the problem shows up anew.
Update:
This morning (TUE 17th Nov.09) I could download the Add-In and it worked again (although I had to hit reload once). However, if I do the Audio Settings Wizzard, it complains that a newer Add-In should be used. If you say yes, it downloads again the broken version and the problems start anew, if you say no, everything works so far. It is a guess but it looks like Adobe reverted the Add-in back to the previous version for the main application, but the Audio Wizzards seems to 'see' still the newer (faulty) plugin.

Did 3.1.3 Update Break Speed Control Feature?

I recently updated my 1st generation iPod Touch to iOS 3.1.3 - I then noticed that the 1x and 2x icons were gone while playing podcasts and audiobooks. My podcast seem to be permanently stuck in half speed. I only use my iTouch to listen to podcasts, so this is a serious problem. Any way to resolve it, or downgrade back to iOS 3.1.2 (if that is indeed the problem)?

I have a new 4G and there is only one speed button shown. When you touch it it cycles between 1/2X, 1X and 2X. What happens when you touch yours? Have you tried restting your iPod?
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Did the 4.1 Update Break Frame-Blending?

Since the 4.1 update it appears that frame blending in slow motion footage looks noticeably worse. Has anyone else noticed this? Applying a speed change of 50% to my EX1 footage used to look beautiful, but now I get jerky, stuttery motion with noticeable blurring. I suppose this could also be an encoder issue.

Sync with itunes or on your phone go to appstore - update - purchase - all or not on this phone and redownload the app.

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?
I have a 2.4GHz Intel Core 2 duo MacMini from 2010, and I just updated to the latest OSX (10.9.4 (13E28)) and now bluetooth audio is broken.
I can pair my device (LG Tone+) to the mac, but no audio will play though it. I've rebooted the machine, reconnected the device after the update, restarted the browser, all with no results.
Typically, when I connect to the system I will get audio acknowledgements through the headset, "Power On" "Battery High" "Connected"
I still get those audio queues through the device. However when I open up a video on YouTube, or attempt to stream music on Spotify...nothing happens.
I've plugged wired headphones into the system and that works just fine. When I connect my Bluetooth headset, the audio to the wired headphones disconnects, so it seems like everything is behaving normally, except that no audio plays through the bluetooth headset.
Any ideas on where to go from here would be greatly appreciated. So, what do we think?

Try resetting the SMC.
Barry

What are the things 10.6.8 update break?

After the 10.6.8 update I am having so many issues,
first, the %100 cpu usage of dock, disabled parallels, and now it is ok,
then, a reboot and I am unable to login, I enter my password, it begins the login process, then logs me out,
if I persist, it logs me in after a couple of tries, but each time a few of my applications are missing at random, and the environment is very very unstable, sometimes I see no desktop background, sometimes I start firefox and I am logged out again.
I've seen some people suggesting removal of login items to resolve a similar but not the same issue, so I'm inclined to think overall, there is an issue with some applications which 10.6.8 update breaks.
For starters my login items are:
GrowlHelper
Geektool
EyeTv Helper
Canon IJ Network scanner
ituneshelper
Magicprefs
Sophosuiserver
Does anyone have any problems with any of these?
I only verified the parallels desktop 6 issue up to now.
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f15

Actually it is not-so-permitted to remove sophos for this machine, but I did it anyhow. No problem so far, but lack of evidence is not evidence of being lack of something so I am not adding it to the list yet

Older versions of Apple Updater and Bonjour can not be deleted

I sent back my 1st Gen. Nano on recall. I then tried to sync the new 6th Gen. Nano to my iTunes 9.0. iTunes said I had to upgrade to iTunes 10.... When I tried to upgrade I got a message saying older versions of Apple updater and Bonjour could not be deleted. Also said something about Apple Software msi.dll not found.
Going through the online Apple support procedures I was told to delete iTunes, which I did. It is now gone although I think it is in "My Music" but I don't know how to get it back to where it was.
I called support and talked to a Asian Lady who spoke poor English and talked VERY fast. As I am 76 and hard of hear, which I told her at the begining, it was hard to talk with her. She told me I had no warrantee service available to me. I told her that the replacement Nano had a 90 day warrantee, which it does. I told her I felt if Apple was providing me with a replacement that required software updates to function in iTunes then their software to download the latest iTunes should contain whatever it needs to do so. SHE HUNGUP on me!!!!!!
Now my question to you folks, how do I retrieve iTunes from the "My Music" location?
And how do I do/get whatever I need to upgrade iTunes?
Please speck like you are talking to an idiot as I am pretty dense on this.
I did follow Apples on line procedures and this is the mess I'm in.
Many thanks, Bill

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Enabling Firewall breaks Bonjour name resolution (and other problems)

Hi there, I thought I had a simple setup but trying to enable VPN & Firewall has shown me there are some issues I need help with:
Setup: MacOS X Server 10.5.8 on MacPro
- Machine is Mobile Account Server for 5 other machines connected to network
- DHCP is obtained from Router in 10.1.10.x range. Server hardcodes its IP in that range (outside of DHCP addressable range)
- Services running are: AFP, Open Directory, SMB, Software Update
- All client workstations connect to server using "servername.local"
This has all been working fine. However over the weekend I tried enabling VPN as we have a public IP address we can use. VPN works fine except:
a) Plugging an additional ethernet cable into port 2, and configuring that port to have the external "public" IP information caused the "license in use issue" that has been reported here (http://discussions.apple.com/thread.jspa?messageID=9958588&tstart=0) so I had to use the solution of duplicating the existing ethernet config and entering the additional external IP to run both off the same port.
b) I can't get L2TP working, but I can get P2PP. Seems like other people are having similar issues (http://discussions.apple.com/click.jspa?searchID=-1&messageID=9704644)
But anyway, so I have P2PP VPN working and without a firewall previous functionality hasn't been impacted. Now of course, I'd be silly to leave this machine with the Firewall turned off as it is now a sitting duck out on the inter-tubes.
I thus enabled the Firewall service with these settings:
- Any service: Allow only traffic from "any" to these ports: (I enabled the ports for P2PP and L2TP)
- 10-net: Allow all traffic from "10-net"
This I assume would restrict access from the external interface, but let all internal subnet communication be unrestricted (like it was before I enabled the firewall). However this doesn't seem to be the case. I noticed that simple non-VPN connections to AFP service took a long time to happen using "afp://servername.local", several minutes before the authentication dialog appeared.
Furthermore if I brought up "Software Update" on a managed client set to pull from "servername.local:8088", the connection would fail.
If I disabled the firewall service, the slowdown and local Software Update would work fine.
But if I try setting: "Allow all traffic from 'any'" on the Firewall (which should be almost like turning it of) it doesn't have a positive effect and slowdown of name resolution and failure to connect to local software update still occurred.
Is there something in the Firewall being enabled that breaks Bonjour name resolution? Anyway to enable the Firewall and still keep Bonjour .local name resolution? Does this problem have anything to do with issue (a) we have to work-around?
Thanks for any recommendations,
Matt

Hi Flanjman,
Additional this article may give you more tips.
https://connect.microsoft.com/SQLServer/feedback/details/674454/name-resolution-not-yet-available
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes and I am unable to use computer at all

I have a Mac leopard. Did a recent recommended update. When it finished,I restarted then a window came up to enter Master Password. I don't know what it is and when I try to enter one, the window shakes so I am unable to use computer at all.

Please confirm exactly what Mac this is, and what 'recent update' you installed.

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any an

iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?

Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart.

HT1386 It says to click the device button in the upper right corner....there isn't one. Itunes doesn't even recognize my devices since I did the most current update. I have two iPhones, thru different carriers, and neither one works now!

I did the latest iTunes update...I have 2 iPhones--each thru a different provider. Now, I can't sync to download any music from iTunes. iTunes doesn't recognize either device now. I went thru diagnostics, didn't work. I tried the suggestions from Apple...it says to click the device button in upper right corner....there isn't one. When I connected each for the first time after update, it "installed device drivers". I have checked for further updates on iTunes--nothing. I made sure there were no updates listed for iPhones...all up to date. I get an error code and from what I have looked through in forums etc, it seems like a lot of people are getting it...0ex000084 I believe it was. Windows opens to download photos but that's it. Devices are not listed at all. I have tried all 3 USB ports in computer too. I have never had any problems before this update!! HELP! I just bought $15 worth of music I can't download to phones now!

On the left hand side of iTunes do you have the sidebar up left hand side?
If this is not up then try this, with iTunes open press "Control" and "s" together and it should bring it up. From the sidebar it should show an option devices with the iPhones underneath it.

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

You already seem to know what the issue is, it is the parallax feature that was added to iOS 7. From your rant, it appears that your attempt to work around this was not successful. According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it). Make your image have excess space on all sides, which is not displayed on the screen. This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D.
As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well. I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine. Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen. It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen... If you don't like this feature, you can always go into the settigns and turn it off.

HT4623 My Iphone 5c won't complete the syncing process with my computer since I did the last software update. The error message says that it can't find SuncUIUCoreLocalized.dll

My Iphone 5C won't sync for the backup since I did the last software update to my phone. It fails in step 3 of the sync. The error message says it can't find SyncUILorelocalized.dll

Hi rich26817,
Welcome to the Support Communities!
The article below may be able to help you with this. You may need to remove iTunes and all of its components as outlined in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
- Judy

Did 10.8.2 update break bonjour?

Similar Messages

Maybe you are looking for