Didn't receive an acknowledgement of message

Hi,
I am getting an issue in flex with respect to
de-serialization of java objects to as3. I am already having as3
objects being referenced in main SWF but once I am fething the data
from the middleware using remote object, I get the following error:
[FaultEvent fault=[RPC Fault faultString="Didn't receive an
acknowledgement of message" faultCode="Server.Acknowledge.Failed"
faultDetail="Was expecting message
'BCA1FC29-2D05-4A71-B10D-F89B4C32C36E' but received
'8A4E55B2-5D5A-495D-BB61-65F5D61F68D6'."]
messageId="7779E8EE-CF8C-2F14-9501-F89B533787BF" type="fault"
bubbles=false
cancelable=true eventPhase=2]
At server and client side I am using granite as a wrapper
over AMF which does the serialization and de-serialization.
Please advise.
Thanks,
Pankaj

In your flex builder, go to menu "project > clean..."
Your project need to be recompiled after you update the LCDS
config files. Cleaning the project forces a recompile.

Similar Messages

  • My Apple store ID password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn't receive any email from apple

    My  other apple store ID ([email protected]) password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn’t receive any email from apple

    You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?

  • I am having trouble sending text messages. They aren't always going through. And sometimes I'm not receiving text messages.  I also have voicemails that I didn't receive until late at night that were left early in the day. I need to resolve this issue ASA

    I am having trouble sending text messages. They aren't always going through. And sometimes I'm not receiving text messages.  I also have voicemails that I didn't receive until late at night that were left early in the day. I need to resolve this issue ASAP!

    julie@remax,
    I know that this would concern me just the same and we want to make sure that your device is connected and receiving these notifications when available. How long have you been having this issue? Are you receiving a specific error message when sending a message? Are you aware if this happens in one location specifically or everywhere you go? Does the issue with messaging occur with all numbers? Share some details, so that we may assist.
    AdamG_VZW
    Follow us on Twitter @VZWSupport

  • What would happen if i didn't receive an Order Acknowledgement email

    what would happen if i didn't receive
    an Order Acknowledgement email to confirm my order details, including shipping and delivery estimates for 2 ipads that i order a day ago or a day and a half already. I'm so worry!!and now i dont know how to keep track with my order

    Check your order status by logging into your account in the Apple store.

  • I purchased the creative suitte for teams 4 days ago and still waiting the activation to download de package, on my account still appear a message saying (pending) And the payment was do correcty. I didn't receive any information about it.

    I purchased the creative suitte for teams 4 days ago and still waiting the activation to download de package, on my account still appear a message saying (pending) And the payment was do correcty. I didn't receive any information about it.

    Moving this discussion to the Creative Cloud forum.
    360medlink if you are facing difficulties with your account then please contact our support team directly at Contact Customer Care.

  • IPhone 4 iOS 5.0.1 stops receiving calls and text messages

    Hi all,
    My iPhone 4 (iOS 5.0.1) suddenly stopped receiving calls and text messages. However, I'm still able to send them.
    The workaround for fixing this issue is to make an hard reset to the iPhone.
    This only occured with 5.0.1 version. It's very annoying because I'm not able to know if it's working or not (I can only suppose that it's not working when I'm a long period without receiving calls/messages)
    Do you know how to solve this ?
    Thanks in advance!

    JasminGomez wrote:
    I already hate iphones and I'm reconsidering my blackberry again because at least that one didn't fail me like this one does!
    First, who really cares what you do?  I certainly don't, and I doubt the vast majority of users on this forum don't either.  Ridiculous statements like that just make you look stupid.
    Second, this is a user to user technical support forum.  I saw a lot of whine here, not a question.  What is your technical support question?

  • IOS 7 downloaded fine but I can't back up restored. Tried 3 times. Tried turning off iCloud. Now I can only receive texts and phone messages. I cannot make calls, retrieve phone messages or send any texts. When I try I just get a blank screen. HELP

    I initially tried to do this at 11:39pm last night. I cleaned up my apps, backed up to my computer and then took the plunge. It downloaded fine, everything went ok until I tried to restore backup. I received a message that there was an error in iTunes and iPhone could not be restored. I tried this three times giving up at 2:00 am. I tried again at 7:30am. No fix. Now I can open up phone and browse in safari. I can get notifications that a text was received or a phone message left but I can't receive or make phone calls, retrieve phone messages, or access any text features. Also I have NO purchased apps. I use my phone got work and this has ruined my day - please help!!

    I would start with going to O2 with the phone and making sure it's set up properly - maybe the SIM they gave you isn't quite right or their network isn't acknowleding it like it should.
    Seeing as you've tried restoring to factory settings and resetting network settings, I'm assuming you've tried restoring the phone as new, just to see if that helped at all. If that didn't help, you definitely need to get in touch with O2 and work things out with them.
    ~Lyssa

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    My friend recently switched from iphone to blackberry, but my messages to her are still sent as imessage. how can i send it as a normal message? she doesn't receive any of my messages. her phone number is saved in my phone under the phone tab, not iphone.

    Sounds like your friend didn't disable iMessage on his/her iphone before switching.  Have your friend do the following:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "edit products"
    Click on the "x" to the right of his/her old iPhone.
    Click "unregister"
    This should unregister it with the iMessage server, which will allow you to send texts as normal SMS.
    On your iPhone make sure you have Settings>Messages>Send As SMS set to ON.

  • Alerts for Receiver Adapter and Synchronous Messaging

    Hi experts,
    I am working on XI 3.0 SP 17. I am doing alert configuration in XI . In below 2 cases we didn't receive alerts for errors.
    1) In case of errors in   receiver adapters.
    2) If an error  occurs in synchronous message processing.
    What would be the Problem?
    Please help me out its very urgent.
    Regards,
    Hari

    Hi Hari
    For raising the alert related to Adapter specific you need to create alert rule in RWB and select the adapter option and then select the adapter for which u want to raise an alert.
    To configure your alerts, proceed as follows:
    ● Create the alert categories that you want to use in your alert rules.
    ● Create the alert rules in which you want to use your alert categories.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    check this links.
    https://www.sdn.sap.com/irj/sdn/forums
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    Trouble shooting Alert configuration:
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Alert Inbox
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    Alert Notification Step-by-Step
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Defining Alert Classifications
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Triggering Alerts
    http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    Setting up alerts
    Setting up alerts in RZ20
    Alert Management
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
    Alert Notification
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
    Custom Alerts in CIC Win Client for CRM 5.0
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601db2b2-2839-2a10-0381-8807979f6ff8
    Understanding u'r SAP EarlyWatch Alert Report
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
    regards
    Sandeep Sharma
    If helpful kindly reward points

  • My Revolution Not Receiving The Whole Text Message

    Hello, lately I have been having a problem receiving the whole text message. People with smart phones text sometimes page length texts. I have no problem sending out page length text, but when someone sends me one, from many different companies and phone types, I only receive what the phone recognizes as the first part of the text message.
    An Example is:
    "Hello, I was wondering what you are doing later. I was thinking we could go to the shopping later at the mall. Do you ha"
    I primary text people so when I do not receive the whole text it is very frustrating.

    It's lies that you haven't received any other complaints on this issue.  1) because I have called repeatedly on this exact issue among many others with this phone and 2) here are some of about a dozen posts on this:
    https://community.verizonwireless.com/message/876695#876695
    and another:
    https://community.verizonwireless.com/message/875860#875860
    and another:
    https://community.verizonwireless.com/message/875820#875820
    granted some are recent, but if you search your forums you will see plenty.
    You used to and still state that you never hear of any of the many issues with this phone, including when it would randomly reboot.  Same phrase, "we have yet to hear of other cases with this device."  Bull...
    I too will be heavily considering leaving Verizon after over 10 years of being a customer not due to an LG phone sucking this bad, but your company's repeated refusal to acknowledge our concerns and treat us like we are ******. 
    Like your master reset phrase above.  So you think that computing devices need a fresh start anytime something goes wrong is just not correct.  If that were the case every time I have fragments between nodes in a clustered server environment I'm supposed to factory reset them?!  NO, you debug it and get it working correctly!  This issue is fragmenting withing your sms/mms delivery system, so fix it!  As a sysadmin for a scientific super computing institute I guarantee I know more about computing devices than you ever will, and I can say your workarounds are asinine and only prolong your customer's issues with a clearly defective device. 
    As with this, although not your manufactured device, it is something you sell and therefore you debug these issues across your network or give those of us that can the ability to do so, but alas another locked boot loader and if we were to root the device to mitigate these issues then we screw our self by trying to help our self.  It's always our fault, as we must have done something wrong.

  • Acknowledging individual message, leaving others in the queue

    Hi,
    I am trying to find a way to acknowledge some messages while leaving others on the queue but when I do call m.acknowledge() on the message I want to ack all the messages previously received are removed from the queue. I have read the doc and it seems to me like what I want to do is not possible, hence my post :/
    The scenario is:
    1. I have 2 messages on a queue
    2. I receive message 1 and decide to keep it on the queue
    3. I receive message 2, process it and acknowledge it
    4. Both messages have been removed from the queue
    Do you know how I could achieve the following behaviour:
    1. I have 2 messages on a queue
    2. I receive message 1 and decide to keep it on the queue
    3. I receive message 2, process it and acknowledge it
    4. Only message 1 is left on the queue
    Thanks a lot,
    Mickael

    The behavior you are seeing is expected by JMS specification for javax.jms.Message.acknowledge().
    Have you looked at MQ's com.sun.messaging.jms.Message.acknowledgeThisMessage() ?

  • Broker wait for all receiver to acknowledge before returning from publish()

    Does the broker wait for all receiver to acknowledge before returning from publish()?
    If suppose i had 10 subscribers. I observerd 10th subscriber getting message late. I thought publisher will wait for acknolodge for each subscriber ? else why it getting message late ?

    I assume you are questioning why the subscriber's onMessage() is getting
    called way after the publisher's publish() had returned.
    The JMS publishers only know that it is sending msgs to a destination.
    Whether there are 0 or 100 subscribers to the destination is something it
    doesn't know or care about.
    The message is sent to a destination on the broker first and then it is
    delivered to the subscribers of the destination.
    The publisher's publish() method will not return until the message has
    been successfully delivered (and persisted if necessary) to the broker.
    Note that this does not mean that the message has been successfully
    received by any subscribers.

  • I gifted my friend an app but he didn't receive it

    Today I gifted my friend an app but he didn't receive it, he has a non credit card iTunes account, we both have an iPhone 5, and we are both running iOS 6.0.2, and I know I did everything right, neither did I or he get any email or notification what so ever. Any solutions

    Confirm that you had the correct email address, and have your friend check any spam filters in his email application (if he's using a computer, not his iPhone) or in the email account itself (the provider's servers) to make sure that messages from Apple aren't being blocked. If all that is correct, try resending the gift: 
    http://support.apple.com/kb/HT1541
    Regards.

  • How to use canon pixma MX377. I can't receive and send fax messages

    Can please anyone send me complete instruction manual in english for my pixma canon MX377 machine because I can't receive and send fax messages. I'm connected to a PBX extension line or a xDSL splitter. Every time i called a person on the machine, I can hear him but he can't hear me. Thank you very much.

    Hi rgc,
    The PIXMA MX377 user's manual is available in an online format and can be downloaded from the Canon Asia website.  The following link will take you to the Manuals page for the PIXMA MX377:
    http://support-asia.canon-asia.com/P/search?model=PIXMA+MX377&filter=0&menu=manual
    Once on the page, please scroll through the list and select the manual that corresponds to your operating system (Windows or Mac), then click the DOWNLOAD NOW button on the following page that appears to download and view the manual.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for