Difference between allocated and distributable Budget

Dear all,
I am facing problem with a CAPEX project created automatically thru Appropriation request and approval.
Requested Budget in Appropriation request INR 100000
Transaction CJ30 :
Allocated Budget u201COverallu201D INR 1000000
Distributable Budget 2009 INR 900000
Shortfall INR 10000
The project requires the full allocation of funds INR 100000 to fulfil the requirements as stated in the Appropriation Request.
I can not use CJ30 to edit the project budget as it comes automatically from IM.
Regards
VK

The original budget of the project must be assigned with IM32, when you need to make a adition of budget you should use IM30 and if you need to reduce the budget use IM38.
Best Regards...

Similar Messages

H.264 data rate difference between local and distributed encode

Doing some testing today and noticed this curious behavior with compressor 3.5.1:
Set video encode for a 50 second 1080i uncompressed file to H.264 at 50000 kbps (50 mbps). Audio is 24 bit, 48khz stereo with no compression.
1. Sending the job to "This computer" for a local-only encode gives me a file size of 327 MB
2. Sending the same job to the same computer using distributed encoding gives me a file size of 211 MB
The data rate for the distributed encoded file is about 34 mbps, which isn't what was specified in the encode settings in Compressor. The data rate for the locally encoded file is about 52 mbps, which is what I would expect when the audio is taken into account.
Why the difference? Both encoded files are the same duration, so there aren't any missing frames. They both look good and play well but this is giving me cause for pause.
Also, another curious difference I noticed... The distributed file has the More Info fields populated with useful information in the Finder (dimensions, codecs, duration, channel count, total bit rate). The locally encoded file does not have this information.
-Matt

Hi,
Not sure if this can be corrected whit customizing. Please see SAP note 1065932 for background on currencies in asset accounting. Some explanations on differences in currencies can be found there.
Regards,
Andre

DIFFERENCE BETWEEN ASSESSMENT AND DISTRIBUTION

Dear Friends,
What is the main difference between Assesment and Distribution?
Thanks in advances.

Hello,
Please follow the forum rules
1. No capital letters
2. Search before posting
DISTRIBUTION =========== Distribution was created for transfer primary costs from a sender cost center to receiving controlling objects. During distribution, only cost centers or business process can be used as sender. A distribution receiver can be a cost center, WBS element, internal order, cost object, or a business process. You can restrict the number of receiver categories in customizing. Primary Postings (such as, energy costs) are collected on a cost center, and allocated at the end of the period by means of the user-defined key. You can only distribute primary costs. During this process, the original cost element remains the same. Line items are posted for the sender as well as for the receiver, enabling the allocation to be recorded exactly. You can reverse distributions as often as required. You use the Cycle-Segment method to define sender-receiver relationships. PERIODIC REPOSTING ================= Differences between periodic reposting and distribution are due to information content and performance. For periodic reposting, no separate credit record is written on the sender for the cost element in the summary report. Instead, the totals record for the cost element is reduced on the debit side, which means that the original debit amount can no longer be checked there (u201Cunclean creditu201D). However, during distribution, the system writes a totals record for the credit (u201Cclean creditu201D). The information on the receiver is the same for periodic reposting and distribution (u201Cclean debitu201D). Compared with periodic reposting, during distribution, the system also updates the partner in the totals record for the sender. This means that the partner can be displayed in the information system on the totals record level. As fewer totals records are written during periodic reposting, performance is better than during distribution. ASSESSMENT =========== Assessment was created to transfer primary and secondary costs from a sender cost center to receiving controlling objects. During assessment, cost center or business processes can be used as senders. The receivers for an assessment can be a cost center, WBS element, internal order, cost object, or a business process. You can restrict the number of receiver categories in customizing. Primary and secondary posting are allocated at the end of the period by the user-defined key. During assessment, the original cost elements are summarized into assessment cost elements (secondary cost element category = 42). As the system writes fewer total records, the assessment has a better performance than periodic reposting and distribution. The system does not display the original cost elements in the receivers. Therefore, assessment is useful if the cost drilldown for the receiver is not important. Similar to distribution, the partner is updated in the totals record during distribution You can reverse assessments as often as required. You use the Cycle-Segment method to define sender-receiver relationships. Regards, Ravi

Difference between idoc and rfc

what is the difference between idoc and rfc? when and where it is used? when there is idoc, why rfc vice versa?

IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system.
IDocs are used for asynchronous transactions: Each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database.
Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication
layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model.
The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system
RFC
Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
note:reward points if solution found helpfull.....
regards
chandrakanth.k

DIFFERENCE BETWEEN BAPI AND ALE

HI
COULD ANYBODY TEL ME
DIFFERENCE BETWEEN BAPI AND ALE

Hi Kalyan
ALE is a SAP specific method how to distribute data from and to SAP. It uses the asynchronous calls based on IDOC structures.
However in the distribution modell of ALE can also be used BAPIs. They will then automatically converted into IDOC structures. After creating the IDOCs they will be passed over to the receiver using the tRFC protocol.
Wheras the BAPIs are using the sRFC protocol.
fir more information please check this:
http://www.sap-img.com/abap/ale-bapi.htm
regards
Srinivas

Differences between rfc and ale/idoc.

hi ..
       will u please send the differences between rfc and ale/idoc's.

Hi,
Please reward with points if helpful................
ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. There are three layers in ALE system: application services, distribution services, and communication services.
For communication services, ALE performs a Remote Function Call (RFC) using the port definition and RFC destination specified by the customer model. RFC is used to communicate between applications of different systems in the SAP environment includes connections between SAP systems as well as between SAP systems and non-SAP systems. Remote Function Call (RFC) is the standard SAP interface for communication between SAP systems. The RFC calls a function to be executed in a remote system.
Means of creating and operating distributed applications.
The purpose of Application Line Enabling is to guarantee a distributed, but integrated, R/3 installation. This involves business-controlled message exchange with consistent data across loosely linked SAP applications.
Application integration is achieved not via a central database, but via synchronous and asynchronous communication.
Application Link Enabling comprises the following three layers:
application services
distribution services
communication services
Two Development Models
     Distribution using BAPIs
     Distribution using Message type
The programming model "Distribution using message types" contains the definitions of message types and IDoc types and the ABAP code for processing inbound and outbound IDocs.
Defining message types and IDoc types:
If you want to create message type enhancements for master data distribution, you also have to create a new message type for each enhancement.
The ALE interface does not allow you to create different segment data for different IDoc types for the same message type.
Writing ABAP code:
         Outbound Processing
           Inbound Processing
You can find information on other ALE functions under:
                               Master Data Distribution
                              Communicating with Non-R/3 Systems
1. The Remote Function Call facility allows you to call an R/3 Function module on a remote machine.
2. To communicate between two R/3 Systems and also with an External System. External Application program also can call these function module for integration.
3. RFC or sRFC - Synchronous RFC
                 aRFC - Asynchronous RFC
                  tRFC - Transactional RFC
                  qRFC - Queued RFC (I.e. Serialization of tRFC)
Types of RFC Call
Synchronous
CALL FUNCTION Func Destination Dest
CALL FUNCTION func DESTINATION 'NONE' ...
CALL FUNCTION func DESTINATION BACK' ...
Asynchronous
CALL FUNCTION func STARTING NEW TASK taskname
PERFORMING form ON END OF TASK
RECEIVE RESULTS FROM FUNCTION func
Thanks
sivaparvathi

Differences between standard and enterprise ??

Hello everyone,
Where could i find an exhaustive list of all the differences between Oracle 9i standard and Oracle 9i enterprise. Recently, i wanted to use a function based index but it is forbidden in Oracle 9i standard... Are there a lot of other "surprises" like this one ?

This http://otn.oracle.com/products/oracle9i/pdf/o9i_family_features.pdf is a reasonably exhaustive list of the feature differences between Enterprise and Standard. I believe it is complete, but can't guarantee it.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Difference between Truncate and Deete .

Hi All,
Can any one pls tell me,
what is the main difference between Truncate and Delete.
Thanks in advance ,
Sanjeev.

Deletes perform normal DML,it take locks on rows, they generate redo and they require segments in the UNDO tablespace.
If a mistake is made a rollback can be issued to restore the records prior to a commit.
Truncates are DDL. A truncate moves the High Water Mark of the table back to zero so all extents bar the initial are de-allocated from the table

Difference between Legal and Managerial consolidation?

Hi,
Can you guys please share your knowledge for this question
Difference between Legal and Managerial consolidation?
Thanks,
Charly

This is quite a general question and should not be answered only in context of BPC.
Paraphrasing your question is not really a help.
In general a Legal Consolidation is one whose purpose is to meet statutory requirements [whereever/whatever they are].
For example generating data for Shareholders on an annual basis in Glossy Annual reports.
A managerial consolidation may be similiar in several ways, but focuses on internal factors and may have a different entity structure than that of the Legal structure. Management reports are typically used at the end of any given reporting cycle (actual/budget/forecast etc) and allow 'management' to guage the performance/review the data of their business.
I suggest looking this up on the various financial websites, where you will get better definitions.
Of course in BPC it is possible to do Legal consolidations without 'legal ownership cubes' and this is what many 4.2 customers have done.
In modern BPC i would check the scope of the consolidaton requirements before choosing any 'bpc consolidation methodology'
Raghu's links are also useful in context of BPC.

What is the difference between occurs0 and occurs1

pls explain about the difference between occurs0 and occurs1 in sap-abap.

Hi Suresh,
WELCOME TO SDN
Please check this link
diff b/w occurs 0 and 1
Occurs 0 and Occurs 1...
Occours 0
Occurs 1 allocates 1 unit of memory(Sufficient to hold one record) and and when one record is appended, one more unit of memory is allocated.
Occurs 0 will allocate memory dynamically.It will not allocate any memory when the itab is declared.
Coming to performance: If you know that you will store only one single value in the Internal table If you use OCCURS 1. It would perform well than OCCURS 0.
Occurs 0 keeps on incrementing when there is a value. But Occurs 1 will assign a single space even though there is no value.
Lets suppose you did not get any values from the DB after a select, in this case if you write Occurs 0 it will not allocate any single space in the memory. If you write OCCURS1 it will pre allocates some memory.
Hope this helps...
Best regards,
raam

Difference between me21 and me21n

hi,
plz tell me what is the difference between ME21 and ME21N transaction.....

Hi,
Me21n is a new tcode for PO with all the data gathered into a single screen ie. why called enjoy transaction ie. you can see header, item overview, item details in the single screen...
There are few new added functionalities are :
You can directly refer the other documents for making or for creation of PO via document overview
You can have exchange rates get copied..
with the enjoy transaction you can directly make PR from PO...etc..
While
me21 is old tcode for PO having all data distributed inside the main window...
Hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL
Edited by: Priyanka Paltanwale on Aug 22, 2008 7:00 AM

Difference between Distribution and Assessment cycle

Hi,
Can any one help me regarding the above(Difference between Distribution and Assessment cycle)
Thanks in advance
Rajani

HI,
Assessment:
Assessment was created to transfer primary and secondary costs from a sender cost center to receiving controlling objects. During assessment, cost centers or business processes can be used as senders .n The receivers for an assessment can be a cost center, WBS element, internal order, cost object, or a
business process. You can restrict the number of receiver categories in customizing. n Primary and secondary postings are allocated at the end of the period by means of the user-defined
key.
n During assessment, the original cost elements are summarized into assessment cost elements
(secondary cost element category = 42). As the system writes fewer totals records, the assessment
has a better performance than periodic reposting and distribution.
n Line items are posted for the sender as well as for the receiver, enabling the allocation to be recorded
exactly. The system does not display the original cost elements in the receivers. Therefore,
assessment is useful if the cost drilldown for the receiver is not important, for example, as in the case
of the allocation for the "cafeteria" cost center.
n Similar to distribution, the partner is updated in the totals record during distribution.
n You can reverse assessments as often as required.
n You use the Cycle -Segment method to define sender-receiver relationships.
Distribution:
Differences between periodic reposting and distribution are due to information content and
performance.
n For periodic reposting, no separate credit record is written on the sender for the cost element in the
summary report. Instead, the totals record for the cost element is reduced on the debit side, which
means that the original debit amount can no longer be checked there ("unclean credit"). However,
during distribution, the system writes a totals record for the credit ("clean credit"). The information
on the receiver is the same for periodic reposting and distribution ("clean debit").
n Compared with periodic reposting, during distribution, the system also updates the partner in the
totals record for the sender. This means that the partner can be displayed in the information system
on the totals record level.
n As fewer totals records are written during periodic reposting, performance is better than during
distribution. See customizing for an example with figures that illustrates this aspect. Under utilities,
make settings for the SAPscript text display, then call up the text by choosing Periodic reposting,
Distribution, or Assessment from the menu.
Regards,
Meenakshi

Difference between BIW and BPS

Hi All,
Please give me brief overview of BPS and tell me the difference between BPS and BIW.
Regards,
Vaishali.

hi vaishali ,
BPS is Buisness Planning & Simulation
whereas BIW -Buisness Information Warehouse.
The difference between them is diffrence of pupose
The BIW is use to store large amount of Enterprice data according to module collected from various source systems & provide it in summarised form to various analytical applications the BIW stores data in the manner that it can be easily retrieved and displayed to end user in for analysis .
the reports may be generated in excel format or as web page .
the basic idea behind BW is that the data stored in warehouse in in detailed format and if used for reporting directly causes performance issues
Now for BPS It is a planning application . ie it provides environm,ent for creating planning applications like Balance sheet planning budgeting ,Investment planning etc.
the BIW store Master And transaction Data( actual data )
the Planning data is Entered through BPS into what we call as transaction cubes . we can also use actual data do some forecasting on it( apply planning functions on it and store it as plan data this plan data can be used for further reporting purpose by the enterprice.
Hope this clarifies you doubt
Nidhi

What is the difference between Campaign and Trade Promotion?

hi experts,
What is the difference between Campaign and Trade Promotion?
regards,
babu

Hi,
Campaign serve operative marketing planning. They describe actions that are carried out, for example mailing actions, product promotions, and telemarketing. Crieria such as target groups, products, documents, people responsible, and the budget are defined in the campaign for these activities.
Campaign are basically used for operative marketing planning and execution.
Trade Promotions are Marketing activity used by industries that sell into the retail channel or through brokers or wholesalers. A trade promotion takes place within a specific time period and aims to increase brand capital, brand awareness, and market share. It is also used to increase sales volume or to launch new products or product lines.
Trade promotions are structurally similar to other marketing objects, except that trade promotions are targeted at a key account.
A trade promotion has a header that provides overview information about the trade promotion, such as the intended key account, the product planning basis, the trade promotion objective, funds plan details, and trade promotion status.
Assignment blocks contain specific information pertaining to, for example, trade promotion dates, products, and causals.
For more information on Trade Promotion please go through the following link:
http://help.sap.com/saphelp_crm60/helpdata/en/eb/aa80ae2ea44778a987960a847fc6ce/frameset.htm
Main difference is campaign is an operative instrument to manage the interactions between the customers and the system

Difference between exipre and obosolete

Hi ALL,
WHAT IS THE EXACT DIFFERENCE BETWEEN exipre and obosolete WITH REFERENCE RMAN.

afzal wrote:
Hi ALL,
WHAT IS THE EXACT DIFFERENCE BETWEEN exipre and obosolete WITH REFERENCE RMAN.As it was mentioned above, obsolete means that the backup is no longer needed according the retention policy. But the expired means that couldn't be found after CROSSCHECK command executed. See the following example. In this example the retention policy is set to redundancy 1 which means that the backup which have more than one copy, is marked as an obsolete. Then I delete a backup, run CROSSCHECK command and see that the deleted backup marked as EXPIRED
RMAN> show retention policy;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
RMAN> backup datafile 2;
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
no obsolete backups found
RMAN> backup datafile 2;
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 1
Report of obsolete backups and copies
Type                 Key    Completion Time    Filename/Handle
Backup Set           1      30-JAN-11
Backup Piece       1      30-JAN-11          /u01/oracle/product/10.2.0/db_1/flash_recovery_area/TEST/backupset/2011_01_30/o1_mf_nnndf_TAG20110130T131902_6nbc877l_.bkp
RMAN> list expired backup;
RMAN> exit
Recovery Manager complete.
[oracle@linux_server ~]$ rm -rf /u01/oracle/product/10.2.0/db_1/flash_recovery_area/TEST/backupset/2011_01_30/o1_mf_nnndf_TAG20110130T131902_6nbc877l_.bkp
[oracle@linux_server ~]$ rman target /
RMAN> list expired backup;
using target database control file instead of recovery catalog
RMAN> crosscheck backup;
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=159 devtype=DISK
crosschecked backup piece: found to be 'EXPIRED'
backup piece handle=/u01/oracle/product/10.2.0/db_1/flash_recovery_area/TEST/backupset/2011_01_30/o1_mf_nnndf_TAG20110130T131902_6nbc877l_.bkp recid=1 stamp=741791943
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/oracle/product/10.2.0/db_1/flash_recovery_area/TEST/backupset/2011_01_30/o1_mf_nnndf_TAG20110130T131914_6nbc8lh0_.bkp recid=2 stamp=741791954
Crosschecked 2 objects
RMAN> list expired backup;
List of Backup Sets
===================
BS Key Type LV Size       Device Type Elapsed Time Completion Time
1       Full    18.72M     DISK        00:00:03     30-JAN-11
        BP Key: 1   Status: EXPIRED Compressed: NO Tag: TAG20110130T131902
        Piece Name: /u01/oracle/product/10.2.0/db_1/flash_recovery_area/TEST/backupset/2011_01_30/o1_mf_nnndf_TAG20110130T131902_6nbc877l_.bkp
List of Datafiles in backup set 1
File LV Type Ckp SCN    Ckp Time Name
2       Full 516141     30-JAN-11 /u01/oracle/product/10.2.0/db_1/oradata/test/undotbs01.dbf
RMAN>

Difference between allocated and distributable Budget

Similar Messages

Maybe you are looking for