Difference Between N8 Made in finland and made by ...

1st of all, i do not believe this s... 2nd of all, most of my nokia set was made in china and i have no complain with that. but recently, i saw some serous post about made in finland and made by nokia set. so i bought both made in finland (no warranty) and made in china(1 year warranty, free bumper case). and surprisingly, i found some difference. please do not take it as personal, it maybe just in my case.
1st of all the box. made in finland set box is better than china one. you can tell if you compare both.
2nd, is the major one. there are two torx screw on the each lower side of n8. both screw side of china one dark gray color is fade, looks like someone tried to open it. though the seller opened the seal in front of me.
3rd, is the set build quality itself. china one volume + and - button are somehow lower than finland one. that means it is really hard to press.
4th, the lock button. if i look carefully, china one has some dot shaped bubble in the lock switch(i mean inside of the lock switch), means finishing was not so good. but it maybe perticularly rare.
5th. the menu light. china one has somehow a few lumens lower light power than the finland one. it took a lot of time for me to saw the difference. not so important.
6. the charger, finland one has 3 pin ac-15e charger, where you can make the black pin bigger and smaller. where the china one has only 2 pin. i think it is not so much difference. maybe, in europe, 3 pin is more available than 2 pin. i am now checking the charging time on both handset(0% to full). but i do not expect any difference. but we will see later.
i am checking the earphone, hdmi and usb to go cable. but i do not think there will be any difference here, cause these are made in china in both box. what do you think? just coincedience in my case?

kirithigan,
PC Suite is effectively discontinued, and recent phones like the N8 are not compatible with it, so you will need to install the newer Ovi Suite.
I'm a little concerned that you stat that you don't have a 12MP camera, all genuine Nokia N(s have the same camera. If your observation isn't just based on the camera settings being changed to a lower resolution, it might be wise to have your phone checked by a Nokia Care point just to make sure that you have been sold a genuine product.
Likewise to the comments made in the original post some time ago, genuine Nokia N8s are always made from identical componets, Nokia does not produce different versions in Finland and China - differences in things like the charger depend not on where a phone is manufactured but on where it is intended to be sold. Similarly, packaging is an issue related to the sales markets not the production origin.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Similar Messages

Is there is any difference between iPhone4 made for Ukraine and for India?

I would like to know about the hardware / software difference between iPhone4 made for Ukraine and for India.
I purchased my iPhone4 in Ukraine and now I'm in India, and here due to restart problem I visit to a local delear/shopkeeper and he replaced some parts of my device with damaged one (crack screen, etc etc) and told me that it is a scrap and need another iPhone4 to replace some parts of it. Now this cell is totally brick, I can't check the EMEI of that device {because now its not booting} and he didn't accept that he replace some/all parts of my device.
So, I want to know that is there is any way to locate these parts?

Anu Tiger wrote:
I told you earlier Sir that this device is made for HongKong market but purchased in Ukraine.
You said:
I would like to know about the hardware / software difference between iPhone4 made for Ukraine and for India.
You also said:
I visit to a local delear/shopkeeper and he replaced some parts of my device
Apple does not sell iPhone parts. You no longer have an iPhone. You have an unsupportable frankenphone.
Go back to whoever opened it up and attempted to repair it. Your phone is not supportable here.

Difference between checking Objects in SU24 and in ABAP code

Hi all,
What is the difference between objects checked in SU24 and the objects checked in ABAP Code.
I think if objects are even checked to No in SU24 and they are in ABAP code then user is able is able to execute that object, is this correct?
and vice versa, if objects are checked to yes in su24 and not in the ABAP code then user wont be able to excute? is this correct
or what is the purpose of maintaing objects both in SU24 and in ABAP Code.
Thanks,
Sun

This is what is known in German as a "Schwerer Geburt"... (not sure whether there is an English term which has the same meaning)...
When you searched, did you read this thread?:
F110 - S_BTCH_ADM
>
Julius Bussche wrote:
> My understanding of this confusion is ...
>
> ... SAP's development systems deem an "unknown" check to be successfull until specifiied for a check (this is different in customer systems - which leads many to believe that adding and removing check indicators from SU24 will add and remove authority-checks....),
>
> ...This problem then reproduces itself both in SU53 and ST01 once the SU22 / SU24 error has been made.
>
> ...It is one of those things which you need to know or find on your own (not too difficult), otherwise you simple don't know it.
It is context specific, when the context is known to the customer system where the code is running => You cannot activate a check in SU24 if it is not coded anywhere (please distingish between starting a transaction, using it, and navigating further from that transaction...). The only case where SAP does what you seem to be assuming (or hoping for...) is infact to turn an authority-check off in some cases or to make the calling context known when it is remote (in which case sy-tcode or the entry point context is not known)...
*It is not to turn the check on when it is not coded anywhere!!!
Perhaps you would like to phrase your final question just one more time.
Cheers,
Julius

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Difference between the balance in FBL3N and FS10n

Hi Sapians,
      There is a difference between the balance in FBL3N and FS10n. There are no recent changes made in the GL master data. Also there is a difference between the debit and credit balances of FS10N and table GLT0.
Please advice.
Ashwin

Go through following notes:
FI-GL-GL-D     970096     FS10N: Drilldown -> differences with active new G/L
FI-GL-GL-D     1609283     FS10N: Drill-Down leads to differences with active splitting
FI-GL-GL-D     1021174     FS10N: Drilldown -> differences despite Note 970096
FI-AR-AR-D     327139     Balance display FI: drilldown perfrmnce for balncs
FI-AR-AR-D     716640     Balance display: Drilldown: Total of open items <> balance

Difference between WIP (work in progress) and Semi finished goods

what is the difference between WIP (work in progress) and Semi finished goods
and how to handle their valuation seperately in SAP.
pls help with some specific important inform on both   WIP   and semi f

Hello Sanjeev,
The difference between SFG and WIP is that ,
1 ) Valuation Class For SFG starts 7***   but WIP material stock starts with 3***
2 ) Stock / inventory of SFG can be seen at point of time but WIP is an Order item
3 ) We can find the stock of SFG at any point of time say it is having specific storage location But WIP is calculated from
    Order for which items are drawn .
4 ) Example You have to manufacture Product AAA which contains SFG1 , 2 , 3 which is made up of some component items
    once SFG 's made the inventory is updated during GR but the components lying in the shop floor required to complete the order
   so we want to know at any point of time how many these materials are lying and the same was issued against Order
   reservation to finish the balance Order Quantity is called WIP. You have confirmed only say 80 Pcs of FERT out of 100 Pcs
   remaining 20 Pcs needs to be confirmed and is being manufactured in the shop floor and the same is lying as WIP .
Material Consumption to Production Order:
In FI:
ROH consumption Account       Dr (PROFIT & LOSS ACCOUNT)
To ROH Inventory Account       Cr (BALANCE SHEET)
Same in the case with HALB
In CO: Cost of Material is
In CO: Cost of Material is debited to Production Order
   For WIP :
Calculation of WIP In FI:
      WIP Account                           Dr. (BALANCE SHEET)
To Change in WIP Account      Cr (PROFIT & LOSS ACCOUNT)
If the Order is completed:
In FI:
Change in WIP Account           Dr (PROFIT & LOSS ACCOUNT)
To WIP Account
Pl come back if you have any doubt,
Regards,
Jaya Vimal
Edited by: jaya vimal on Aug 9, 2010 2:10 PM

Difference between sapr/3 4.7 and sapr/3 ecc 5.0

Hi all,
can any one help me in this....
What are the enhancements made in ecc5.0 when compared to sap r/3 4.7 ?
What are the enhancements made in sap r/3 4.6 when compared to sap r/3 4.7 ?
why do we need unicode ?
regards,
sathy.

Unicode enables you to operate different languages supported by different code pages, such as Japanese and Chinese, within the same physical SAP R/3 system
Difference between sapr/3 4.7 and sapr/3 ecc 5.0:
See <a href="https://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/a7455fd8-0301-001">https://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/a7455fd8-0301-001</a>
All details can be found at <a href="http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_O">http://service.sap.com/form/sapnet?_SHORTKEY=01100035870000497320&_SCENARIO=01100035870000000112&_O</a>
Ps: Reward points if helpful.

Difference Between Cahs Sales, Rush Order and Standard Order

Hi gurus,
I want to know whole configration for rush order and difference between 1. Rush order and cash sales. 2. cash sales and standard order.
Would u please help me for this...
Regards
Prashant.

Hi,
1) Cash sale : in this delivery automatically happen when you save the sales order. After that you have to give an invoice to the customer.
2) Rush order. Here also delivery automatically happen when you save the sales order. But the difference is you can send invoice after some time but the delivery should happen immidately.
If you goto any super market first, you pick up the item and then pay the bill and then you will get the bill, this process is cash sales.
Cash sales is order related billing whereas RO is delivery related.
Cash sales is not relevant for availability check as you will be picking the goods whereas RO is relevant for availability check.
Cash sales is also not relevant for credit management whereas RO is relevant credit management.
Cash sales uses RD03 as output which immediately prints the invoice whereas RO uses standard output RD00.
Cash sales has one time customer account group where as RO normally doesn't.
For cash sales order type is BV or CS and for RO it is RO
Cash sales triggers petty cash a/c where as in RO customers account is debited.
Delivery and settlement will be done immediately in cash sales where as in RO only delivery will be done immediatrly.
Rush Order/Cash Sales u2013
Rush orders and Cash sales are sales document types that are used in the sales from plant process or when the customer needs to pick their goods immediately from the warehouse.
In the sales document type, the following changes have to be made for rush order/cash sales u2013
a. order type u2013 RO/CS
b. shipping conditions u2013 immediately
c. immediate delivery u2013 X
d. lead time in days u2013 not to be specified
e. delivery type u2013 LF/BV
f. billing type u2013 F2/BV
g. item category u2013 TAN/BVN
h. schedule line category u2013 CP/CP
In case of rush orders and cash sales once the goods have been withdrawn from the warehouse, picking and posting goods issue can begin.
In case of rush orders, when you create the billing documents the system prints the invoice papers and sends them to the customer.
But in case of cash sales, an order related billing index is generated automatically. This updates the billing due list. Billing type BV is created, while the billing due list is being processed and the system does not print invoices during billing for a cash sale.
In cash sales when you save the order, the system automatically generates a cash receipt that can be given to the customer as an invoice and the goods are picked up from the warehouse immediately by the customer. You control the output with output type RD03, contained in the output determination procedure for order type CS.
Best Regards,
Amit

Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

The Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim

As mentiond in the title my questions are:-
- What is the Difference between iphone Unlock T-Mobile and iphone Unlock Free-Sim?!
- Did they both work Internationally?!
- For the Unlock T-Mobile should i use their sim or i can use any sim directly?!
Thanks

Unlocked means unlocked and you can use any sim card and keep changing them and the phone will never lock if it is unlocked.
Sim free, means that the phone is sold at full price without a sim card, but the phone will lock to the first sim card that you put in it. A sim free phone will work internationally, but you will have to use a roaming plan with your phone company because the phone will be locked, so you CANNOT change it to a local sim card.
If you have an unlocked phone, you can use it internationally by inserting a local sim card and the phone should then work and you won't have to pay increased roaming charges as you would with a locked phone.
If you buy a T-Mobile phone that is unlocked, DO NOT activate it with their sim card or the phone will lock to T-Mobile and you will have to approach them to get it unlocked. Use it with another sim card straight away and it will remain unlocked.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Difference between SY-SUBRC EQ 0 and SY-SUBRC EQ ' 0 '

Dear All,
I am not from abap background.
I have a simple question.
what is the difference between sy-subrc eq 0 and sy-subrc eq '0'
How does it impact a statement like this for example
SELECT /BIC/ZAGENT /BIC/ZBATCH_MO /BIC/ZDOC_NUM /BIC/ZCUSTOMER
           /BIC/ZSTORE /BIC/ZLINE_NUM /BIC/ZMATERIAL /BIC/ZBARCODE
      FROM /BIC/AZO_AMVN100
      INTO CORRESPONDING FIELDS OF TABLE it_aquisition
      WHERE /BIC/ZAGENT EQ SOURCE_FIELDS-/BIC/ZAGENT
      AND /BIC/ZDOC_NUM EQ SOURCE_FIELDS-/BIC/ZDOC_NUM
      AND /BIC/ZOCFLAG = '1'.
    if sy-subrc EQ '0'.
      SELECT SINGLE /BIC/ZDOC_NUM FROM /BIC/AZO_PMVN300
        INTO v_docnum
        WHERE /BIC/ZDOC_NUM EQ SOURCE_FIELDS-/BIC/ZDOC_NUM
        AND /BIC/ZAGENT EQ SOURCE_FIELDS-/BIC/ZAGENT
kindly help me with this.
Pleae do a little more research before posting questions here...even if you are new to ABAP.
Edited by: kishan P on Aug 24, 2010 10:00 AM

Hi,
Please refer [Wiki post|http://wiki.sdn.sap.com/wiki/display/ABAP/Sy-Subrc].
hope it help you,
regards,

Getting Big Headache, What is difference between Flash Lite 3.1 and Flash Player 7

Hello, I am asking questions about the two similar yet different programs for Pocket PC version only:
1) Which came first, Flash Lite 3.1 or Flash Player 7?
2) If I have both in my Pocket PC, will there be product incompatibility?
3) What is the difference between Flash Lite 3.1 and Flash Player 7.
4) I have a Flash Lite 3.1 but uninstall information says "Flash Lite 3.1 for Opera Mobile", did you releaase this? Is this an illegal copy? A developer's copy?
*I don't know exactly where I got it, but I got it from the HTC developer's forum: XDA-developers.com
*I also use Opera mobile, a web browser for Pocket PC's.
5) What is difference between Flash Lite 3.1 and Flash Lite 3.1 for Opera? Is the only difference is that Flash Lite Supports everything flash related, while Flash Lite Opera supports only flash in opera?
Hi, I don't expect all answers, but I hope someone or someone from adobe support can clear some things up for me.

The program under my "remove programs" list is specifically called "Adobe Flash Lite for Opera". The XDA forums people said along time ago that it was Flash Lite, and kept calling it Flash Lite, and not Flash Player 7.
Now what about this:
http://www.adobe.com/products/flashlite/version/
The table shows the differences between FP 7 SDK, FL 2.1, and FL 3.1. And it's quite obvious that FL 3.1 has way more features than Flash Player 7. What does SDK mean? And why are you telling me FP 7 has more features?
With this information, can you or anyone else provide any more details and clarification?

What's the difference between a not-initialed object and a null object

hi guys, i wanna know the difference between a not-initialed object and a null object.
for eg.
Car c1;
Car c2 = null;after the 2 lines , 2 Car obj-referance have been created, but no Car obj.
1.so c2 is not refering to any object, so where do we put the null?in the heap?
2.as no c2 is not refering to any object, what's the difference between c2 and c1?
3.and where we store the difference-information?in the heap?

For local variables you can't have "Car c1;" the compiler will complain.That's not true. It will only complain if you try to use it without initializing it.
You can have (never used, so compiler doesn't care):
public void doSomething()
   Car c1;
   System.out.println("Hello");
}or you can have (definitely initialized, so doesn't have to be initialized where declared):
public void doSomething(boolean goldClubMember)
   Car c1;
   if (goldClubMember)
       c1 = new Car("Lexus");
   else
       c1 = new Car("Kia");
   System.out.println("You can rent a " + c1.getMake());
}

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What is the difference between component(Y, Pb, Pr) and component(R,G,B)?

[I previously posted this question in another thread as hadn't realised how to post new question]
Q. What is the difference between component (Y, Pb, Pr) and component (R,G,B) ?
I’d previously thought I was reasonably savvy on all things HD, but when I turned my thoughts to looking into getting a mac mini to run part of my home cinema I realise I have some confusions around the above.
Here’s what I think I know:-
The mac mini has a DVI output of the type which can output both digital and analogue, and so via physical adapters it could be used to connect to displays that take HDMI or VGA style RGB leads.
I know on the market I can get a DVI to Component cable lead which would therefore lead me to assume it could drive my HD plasma with component input (Y,Pb,Pr), as I currently drive the HD TV via component cable with a SKY HD box (720p and 1080i), an xbox 360 (720p) and a progressive scan DVD player (480p), all through a Denon AV-amp.
The problem is, I’ve heard somewhere that the DVI to component is R,G,B only and that it is not Y, Pb, Pr which is making me wonder it a) this will work and b) if I really understand component video afterall.
I notice the Apple TV outputs Y,Pb,Pr but colours them red, green and blue, so am even more confused….
Hopefully someone can help educate me on this !

Thanks for this.
My Plasma is a Panasonic 42" Viera March 2005 model. No HDMI, No VGA.
It can process signals up to 720p and 1080i via the component (an interestingly it makes a huge difference over SD even though the native panel is 480..!?!)
Am I right in thinking that the iPod component cable will also be R,G,B and therefor might be a suitable trial? Ie. if the TV accepts the input from the iPod then it should work for the mini?
Only other thing of note is I'm doing all this via my Denon 1707 AV amp which does have the facility of upscaling, but I imagine it needs to stick to one format?
Thanks.

Difference Between N8 Made in finland and made by ...

Similar Messages

Maybe you are looking for