Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

Similar Messages

  • I converted video into frames. There is a big difference between video size(700 MB) and All frames s

    I converted video into frames. There is a big difference between video size(700 MB) and All frames size(More than 5 GB). What are the reasons ?

    Please, are you sure that you posted this in the correct forum? This is the Adobe Captivate forum, not a forum for video created with other applications like Premiere Pro.
    Lilybiri

  • What is the difference between "UDP Multicast open.vi " and "UDP open.vi " ?

    What is the difference between "UDP Multicast open.vi " and "UDP open.vi " ?

    Someone correct me if i am wrong, the difference is "multicast"
    -Based on my General Computer Network knowledge, multicast means sending data/packets to selected group of nodes. Which will be UDP multicast
    -UDP open.vi might be for unicast which is to one node specifically.
    -One more difference is in first one(multicast open), you have additional read,write and read write funcionality which is not available in normal UDP open.vi
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • Charge off difference whening clearing customer open item with bank receipt

    Hi,
    Our company users will use F-32 to clear customer open item with bank receipt, sometimes, our invoice is 100 RMB issue to customer, the customer finally pay 99.98, then in F-32, we use charge off difference to post 0.02 difference to a account.
    The user then want to control this, saying for example, if the customer pay only 90, whening using charge off differnce, the system will pop up a error message.
    Can this be done in SAP, or we need to use user exit, then which user exit?
    Thanks.

    Dear,
    This is done through customer tolerance group using transaction OBA3. Here enter the maximum amount in Loss under the Permitted Payment Differences. you are able to hold tolerance for customer clearing.
    Is this what you wanted?
    Regards,
    Chintan Joshi.

  • Difference between BT Broadband Speed Test and all...

    I have recently moved to BT Broadband from TalkTalk as I was dissatisfied with the speeds that I was getting with my TalkTalk line – they were OK outside of peak time but woeful in peak time.  With TalkTalk, I was on their ‘up to’  8Mbps which, in practice, translated to about 6Mbps for download outside peak times but dropped to below 1 Mbps in peak (around 500Kbps and sometimes even lower!) – these measurements were taken regularly with both the TalkTalk and Think Broadband speed tests which were usually roughly in agreement and I haven’t had to rely on memory as I downloaded the spreadsheet records available to Think Broadband registered users. 
    I am now posting this in the hope that somebody can explain the difference between the BT Broadband Speed Checker (Here) and all the others available on the web.
    When you are first connected to BT Broadband they warn you that your speeds will vary over the first ten days while they test your line to ascertain optimum speeds for it.  During that time, I checked it every day early, mid-day and evening (usually around 0630, 1230 & 2000 hrs) with Think Broadband and, yes, it did vary – the first day it started at around 1Mbps for download but rose to 10Mbps by the end of the day. On the second day, it rose to a peak of 17.8Mbps which was unbelievably fast to use (well, to me anyway) but never reached that speed again as over the rest of the ‘test period’, the download speed dropped and dropped to the point where I am now outside of the BT test period and consistently seeing only 2 to 2.5Mbps over a 24 hour period.
    I emphasise that those speeds were all recorded using Think Broadband but I am now doing tests using the BT checker mentioned above and the speeds which BT indicate for downloads are consistently in the 14 to 18 Mbps range.  If I do the BT and TB test in quick succession, they generally show the BT calculated speed to be better than that of TB by a factor of around 7 (ie.  TB at 2 Mbps whilst BT show 14Mbps).  Now either they are measuring different things (or the sams things differently) or one of them is lying – all I know is that my general browsing experience is slower outside of peak times and I can tell by the time it takes to load pages. 
    I might have misunderstood something in these tests but I am now beginning to regret that I fell I for the BT sales pitch which promised me ‘up to’ 20 Mbps but ‘more likely’ 17 Mbps.   I have tried to discuss thisl with BT Broadband technical support but they were no use whatsoever – indeed, I got the impression that he was reading from a script and as it didn’t cover my issue, I was wasting my time – it would also have helped for English to be his first language! 
    According to the BT test, I am well within their ‘minimum guaranteed access speed’ (Here).  for my area (about 4Mbps) and therefore cannot do anything about it.  BUT that is only when measured using the BT speed tester – with any other, I am well below.  I am beginning to feel very conned and might even start looking to withdraw from BT if I cannot get this settled.
    Can anybody help.  I will happily post detailed records of my various tests or router stats if they will help.
    Thanks in advance.  

    OK, I have now done all the tests etc. And here are the results:
    ADSL Line Status from HomeHub 3
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:27:11
    Downstream:
    23.71 Mbps
    Upstream:
    1.176 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    3.4 dB / 6.4 dB
    Line attenuation (Down/Up):
    5.3 dB / 2.1 dB
    Output power (Down/Up):
    19.4 dBm / 11.6 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    41 / 24
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    20 / 7
    Error Seconds (Local/Remote):
    61 / 13
    BT Speed Test Result
    Download Speed:  6.59Mbps
    Acceptable Range:  4Mbps - 21 Mbps
    IP Profile:  21.42Mbps
    Upload Speed:  0.99Mbps
    Upstream IP Profile:  0.83 Mbps
    Think Broadand Speed Test
    Download Speed:  1.8 Mbps
    Upload Speed:  0.9 Mbps
    Uswitch Speed Test
    Dowload Speed:  1.7 Mbps
    Upload Speed:  0.9 Mbps
    For what it's worth, I followed the guidelines for the BT test and took all of the tests within a 10 minute period.
    All I know is that my daytime BT connection is nowhere near as fast as I had from TalkTalk.  Indeed, it was not even quick enough to watch non-HD YouTube videos earlier this morning without freezing to buffer.

  • Difference between F.35 Receivables amount and FBL5N report open items

    Hi All,
    There is an amount difference between f.35 receivables amount and fbl5n open items amount, I have observed that there are some changes to credit master like risk category and credit representative group, so I thought if we run f.28 it will be right but still difference exits.
    If anybody has come across similar issue or if you have any idea on this on how to analyze, please let me know.
    Regards,
    RK.

    Hi ,
    Please check the time horizon in credit check used. then compare it with FBL5n.
    May be there will be difference in comparison period.
    Program RFDKLI20 or F.28 is to run when there is changes in Assignment from company code, entry in customer master data, entry in sales area data, user exit., currency of credit control area , Assignment of customers to credit accounts.
    And
    Program RVKRED09.--> only the risk class was changed it is sufficient to run
    Regards
    Atul

  • How to clear vendor open items if vendor invoice currency and payment currency different

    Hi All.
    How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD  but local currency is INR
    while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
    I checked all configuration, configuration wise no problem
    BR.
    Chandra

    Hi Chandra,
    You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
    Invoice is in USD - 1000 & INR - 60000
    Payment is in INR - 60000
    Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
    Vendor A/c Dr 60000 (invoice)
    Vendor A/c Cr 60000 (Payment)
    Gain from exchange rate A/c Cr  100 (60000 - 60100)
    Small diff.write off A/c (or) Dummy A/c Dr 100
    After done the above posting, we have to pass below manual JV in FB01
    Gain from exchange rate A/c Dr  100
    Small diff.write off A/c (or) Dummy A/c Cr 100
    Regards,
    Mukthar

  • Difference between sales order schedule line and item level data

    Hi All,
    Could you please let me know what is the difference between sales order schedule line and item level data?
    Thanks,
    Ramya

    Hi Ramya,
    Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc.,  ie It contains the full details of sales order data with respect to the scheduled line of delivery.  The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
    Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
    contains the full details of item irrespective of scheduled line.
    Regards,
    R. Senthil Mareeswaran.

  • How to clear the open items and parked items for customer

    Hi Experts,
    I need to clear the open items and parked items for customer.
    So any one could let me know the transaction code and procedure for clearing the items for customer.
    Best regards,
    Kesava balaji.

    Hello,
    Parked items will have NO RELEVANCE, unless you post it.
    You CANNOT clear parked items.
    You can clear the posted items using F.13 or F-32
    Regards,
    Ravi

  • Clearing customer open items

    Hello!
    Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
    With all the best,
    Merlin

    Hello,
    IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
    Give your chart of Accounts
    1. Create your account symbols
    Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
    2. Assigning Accounts to Account Symbols
    Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
    3. Create Posting Rules
    Create freely definable posting rules.
    4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
    a) For all the payments you need to create the entries for posting area 1
    b) For all the receipt you need to create the entries for posting area 1 and 2
    c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
    d) If you want just only entries to be posted use posting type 1.
    e) If you want to clear the check, then use the posting type 4.
    f) Configure according to the entries to be posted.
    g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
    5. Create Transaction Type
    Create freely definable Transaction Type
    Select the transaction type and assign the external transactions to your posting rules.
    For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
    Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
    Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
    6. Assign Bank Accounts to Transaction Types:
    You need enter the Bank Key / Bank Account / Transaction type here.
    You can get the the bank key and bank account details from table T012K (Go to SE16)
    Further supplementary notes may be useful to you:
    There are different programs to upload electronic bank statement.
    FF.5 or FF_5.
    I think your case Multicash format you are using.
    You need have three files in FF.5 and two files in FF_5
    You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
    1. Take all the external codes list from bank.
    2. Take any available documentation from the Bank describing the relevance of the external codes.
    3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
    4. Based on this decide the Account Symbols that are required to be created.
    5. Make sure that the masking rules are configured properly.
    6. Decide the posting rules that needs to be created.
    7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
    6. Concentrate on the posting areas to be posted while uploading the bank statement.
    Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
    Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
    You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
    SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
    Vendor Account Dr
    To Bank Sub Account
    The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
    Bank Sub Account Dr
    To Bank Main Account
    It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
    At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
    The entries would system itself pass is:
    Bank Main Account Dr
    To Bank Sub Account
    Bank Sub Account Dr
    To Cutomer account.
    Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
    Ideally you will use
    FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
    FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
    GO THROUGH SAP NOTE 48854
    Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
    Though this note is in relevant to GB specific, you will find this very useful.
    description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
    The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
    1. '00': There is no processing. The entry line is ignored.
    2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
    3. '02': Transfer of the ending balance to the electronic bank statement
    4. '03': Transfer of the opening balance to the electronic bank statement
    5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
    6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
    Note
    To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
    Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
    Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
    62 SAPBACS + GB63 000 5
    7. '06': Bank costs or interest revenues
    Recommended interpretation algorithm: '000 - No interpretation'
    8. '07': Total amount of cash disbursements
    9. '08': Total amount of cash receipts
    10. '09': Items not paid
    Recommended interpretation algorithm: '000 - No interpretation'
    Regards,
    Ravi

  • Foreign Currency Valuation - GL at the time of clearing of open items

    Hi experts,
    We valuate the open items (Balance sheet items) in Company Code Currency without checking the reversal option.
    At the time of clearing of these open items, the GL used for reversal of the valuation difference is been different.
    GL mapped in OBA1:
    Exch.rate diff realized
    Loss/Gain: 716000
    Valuation: Loss/Gain - 716001
    Bal.Adj 1: 101699
    Translation:
    Loss/Gain: 716000
    Bal.sheet adj -Loss/Gain: 716001
    At the time of clearing of open items:
    The entry which is getting passed for the reversal of the valuation difference is some time posted to GL: 101699 and sometime to GL 716000. The off-setting GL been Clearing GL(which is been valuated).
    Could someone kindly through some light as to why the system behaving in such a way. We expect the GL at the time of reversal to be 101699.
    Thanks in advance.

    Hi Pradeep,
    The principle of foreign currency revaluation works as follows for the open items like AR, AP and Bank Balances:
    At the period end the system revaluates the open items (or balances, as the case may be) with the period end exchange rate and thus posts the difference between the original exchange rate (at the time the open item was created) and the period end rate. This could be loss or gain due to revaluation. One side of the entry is P&L (7...account) and the other side is the balance sheet (the balance sheet account typically comes from AR, AP or Bank/Cash range).
    This loss or gain is not realized since at the period end the open item is still out there. When you clear the open item, the loss or gain due to the latest exchange rate is realized immediately and is posted to realized loss or gain, with an offset to the original balance sheet account.
    I hope the above helps.
    Sharabh

  • Unable to clear vendor open item.

    Hi experts,
    Have posted vendor document  under document type KZ directly, there is no open item invoice to clear the document.
    posted entry as below. now we are unable to clear the open item document through F-44. we did not find open item for the posted document which is posted in document type KZ.
    Vendor account entry
    25 vendor account 10000
    38 vendor account  8000
    50 bank account     2000
    document has been cleared only 8000 not 2000.  Please advice me how  to clear the KZ document.
    Regards,
    Anji Reddy.

    HI Anji Reddy,
    There is some Process to do Clearing function
    first of all Open item should be there in Vendor account with the Invoice.
    For that invoice there should be a payment which is full payment or else Partial Pament.
    Then you can do clearing function to clear the Open items.
    Through F-51 you can do both Payment and clearing which is Post with clearing
    if you have done payment throgh any other Tcodes you have to come F-44 and do mannual Clearing.
    Try to explain your senario more Clear so that your doubt can solve
    Regards
    Mahesh

  • To clear vendor open item in foreign currency

    Would like to seek for advise.
    I am not able to clear vendor open item due to document currency is
    difference, eg.GBP with RM.refer to attachment- I would like to offset
    document number 200000384,200000200,1500000000 with 200000387.
    We try to clear the vendor open item by using t-code F-44 and F-51 but
    not able to clear as it prompt error message difference is too large
    for clearing.

    no answer reply so have to close for no solution.

  • Clearing of open items- inter company transfer

    Dear All,
      I made some intercompany postings for vendor open items. When i am clearing the open items (receiver company code) of vendor through F-53 system says " No open items found". But through FBL1N i can see these as open items.
    Thanks in advance
    Regards,
    Sankar

    Hi madhu,
          OBYA - i already settings for inter company code postings. I already made that and make posting also.
    Now the problem, i transfered open item of vendor(1) of 100(Dr) from sender company code(1234) to receiver company code(ABCD) to the vendor(2) 100(Dr).
       when i did this transfer sender company open item nulified and the same open item transfer to the receiver company code with open item status.
       Now i book one bill on vendor(2) receiver company code (ABCD) for 100(Cr). Now when i am clearing debit amount with credit amount through F-44 system generating a message that "open item not found"
       i choose document number in additional selections.
    Regards,
    Sankar

  • Clearing of open items of Vendor or Customer by FIFO method

    Dear Experts
    All debit and credit entries on a customers or vendor account has to be cleared automatically.  Now i want to clear the open items using FIFO procedure, that is credit entries on a customers account will be cleared against the oldest open invoice. The open items will be automatically matched by the system based on available credit.
    Does anyone have had a similar issue? I
    Thanks
    Ravi Sankar N D

    Hi Ravi,
    SAP will pick these invoices for payment according to vendor open items which are due according to payment terms.
    When it comes to customer invoices, clearing depends on when customer pays payment to particular invoice, these customer invoices will get cleared.
    I assume you are talking more closely to intercompany scenario (If it is not intercompany invoices clearing, you should not worry mostly about customer invoices clearing), where you want to clear vendor invoices and customer invoices. So you need to incorporate entry date in your functionality to pick intercompany invoices clearing.
    Thanks much
    Raghu Kolla

Maybe you are looking for