Difference between paint() and paint() after resize

Hello,
I have an application where I am painting a plot on a JPanel inside a JInternalFrame.
If I just call JPanel.repaint everything gets painted in the correct position.
The problem comes when I am resizing the JPanel via the JInternalFrame. In that
case the paint code retrieves the bounds of the JPanel and plots only some of
the items in the wrong place. The errant positions indicate that the paint is retrieving
a JPanel bounds for some items that reflects one of the JPanel sizes before
resizing stops.
How can I ensure that my paint() code is only getting the size of the JPanel after
resizing has stopped?
Thanks for any info,
P

DrClap wrote:
You can't. Because no part of your application can tell when that happens.
Try it with some application that you're familiar with. Like the browser you're using right now. Grab one of the window edges and drag it to make the window
smaller. Now stop dragging, but don't lift your finger off the mouse button. See how the browser redisplays itself, even though resizing might not have stopped yet?
Good point.
I was under the impression that resize stopped when the mouse button was released.
But, now that you mention it, things are being redrawn while resize is happening.
Thanks
P

Similar Messages

Duration difference between viewer and timeline after insertion or overwrit

Reopened project from last week and now when I try to put in a new scene, the duration I give in the viewer changes in the timeline.
i.e. - I overwrite in a 17 frame scene and it becomes a 21 frame scene in the timeline.
All worked well last week, Any ideas?

People have very short attention spans these days. Someday the government will have to put Ritalin in the water supply.
I think I have found my own answer.
The clips that were causing problems were captured at a different frame rate than the timeline.
I didn't do the capture but it is my best guess so far.
I am cutting together movie promos for a television station. Some are off of DVD and some are off of tape.

What's the difference between paint and paintComponent?

can any body tell me the difference between paint and paintComponent?and when i should use paint and when use paintComponent?
I know that when I use repaint,it will clear all the objects and then paint again?
is there a method similar to repaint?
thanks in advance!

and when i should use paint and when use paintComponent?Simple answer:
a) override paint() when doing custom painting on an AWT component
b) override paintComponent() when doing custom painting on a Swing component
Detailed answer:
Read the article on [url http://java.sun.com/products/jfc/tsc/articles/painting/index.html]Painting in AWT and Swing.
Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/14painting/index.html]Custom Painting.

Difference between resizeEffect and resize ?

Hy
does anyone can explain me the difference between resizeEffect and resize ?
example:
<mx:Button label="hello" resizeEffect="" resize="" />
thanks !

resize is an event that the component dispatches whenever it's size is changed.
resizeEffect is the effect that takes place when the resize event happens.

What are differences between Java and C#

What are differences between Java and C#?
I was looking at C# and it looks very similar to java, does anyone have any input on what the primary differences are?

C# has ventricles, being a more modern, hip,and
stylin language.Yeah, but it can't use them properly unless youbolt
on an after-market turbo charger and paint some
go-faster stripes.
Java doesn't need ventricles, as the language is
built as a bifurcative scrobbidibbit from theground
up.
And here I thought you were smart.The ventricles add power on the backswing and keep
down the humpty-B count, and those stripes don't
really do much except to impress the PHBs. A
ventricle here and there wouldn't do Java anyharm.
Oh, I see.
I didn't realize you were concerned with humpty-B. So
I suppose you put 17 firewalls in front of your VM's
Jeffries tubes too huh? And measure productivity in
fleems per wonkle?
That may have worked back when you carved FORTRAN on
stone tablets, and then went to look for a nice young
lady to club and take home. But modern software
development techniques demand a focus on the
regressive thromboid paradigm, and ventricles only
get in the way when you're trying to calibrate that
against the latest fractal suppository data.At least I have actual experience in carving FORTRAN on stone tablets, so I know what I'm talking about. (The clubbing was the other way around but that's neither here nor there.) As for your regressive thromboid paradigm, regressive is exactly what it is. Progressive paradigms, whether thromboid or rhomboid, require ventriculation to achieve their maximum potential.
And I suppose if you're still using those Jeffries tubes in your VM, it's not surprising that it's humptied to the max. Try installing Apache Fallopian if you really want to dehumptify it, or Apache Eustachian for 64-bit VMs.

Difference between ALV and Table control

Hi folks,
i want to know the major differences between AlV and table controls.
i know that table control is designed in screen painter, but i want to know the major diff between Table control and ALV.
helpful answers will be rewarded.
Regards,
Naveen

Hi Naveen,
Basically ALV is a way to display the output and Table Control is designed in screen painter through which you can get entries in Table Control, can delete some records etc for further processing and its not use only for Display.
ALV is Application List viewer:-
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
TABLE CONTROL:-
ABAP offers two mechanisms for displaying and using table data in a screen. These mechanisms are table controls and step loops. Table controls and step loops are types of screen tables you can add to a screen in the Screen Painter.
Rewards if useful.
Regards,
Shilpi

Difference between implements and extends

Hi all,
what is the difference between implements and extends. i am sorry to ask this silly question, but i am new to JAVA.
Thanks
Balaji

when you extend a class, your class that you are coding inherits every method and field from the extending class. For example:
public class CustomFrame extends JFrame {
//Your class's methods will be in here, but so will all of JFrame's methods.
}You can override (most) methods from extended classes if you want them to do different things than they normally do. The most commonly overriden methods when using swing are stuff like paint(Graphics g). It needs to be overriden to repaint all of the components.
When you imlpement something, you have to specify an interface. Interfaces have methods in them with no code. If you implement an interface, all methods in in must be defined. If not, the code will not compile. Some interfaces like ActionListener extend other classes to perform stuff. The actionPerformed(ActionEvent e) method will perform an action when a button is pressed, etc.

Differences between awt and swing

Ive written the following code, however Ive implemented the gui in awt rather then swing. Ive been told it hs too be in swing. What is the difference between swing and awt what will I need to change in my program so that its done using swing rather then the awt? Heres the code:
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class: pp
// This class drives the customer manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends Frame implements ActionListener
// Container of customer objects
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private Button delete;
private Button update;
// Default constructor.
public pp ()
// Assign "Paper Round Manager" to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save customers and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem.
Label l = new Label ();
add ("North", l);
// Place the names component in the center part of the
// frame window.
add ("Center", names);
// Create a panel object to hold four buttons.
Panel p = new Panel ();
Button b;
// Add an Insert button to the Panel object and register
// the current pp object as a listener for button events.
p.add (b = new Button ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current pp object as a listener for button events.
p.add (delete = new Button ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one customer to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current pp object as a listener for button events.
p.add (update = new Button ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one customer to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current customer object as a listener for button events.
p.add (b = new Button ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
add ("South", p);
// Set the background of the frame window container to
// lightGray
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setSize (400, 200);
// Allow the user to resize the frame window.
setResizable (true);
// Load all contacts.
loadCustomers ();
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new pp object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected contact item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the contact item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new customer.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Contact object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.name + ", " + temp.publication);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all contacts from contacts.dat into the contacts
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("Customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.round = dis.readUTF ();
temp.address = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.name + ", " + temp.publication);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first contact item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all Customer objects from the customer Vector object
// to customer.dat. The number of customerss are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.round);
dos.writeUTF (temp.address);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the customer object (from the
// customers Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.round,
temp.address,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.round = new String (def.round.getText ());
temp.address = new String (def.address.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.name + ", " + temp.publication,
index);
// Destroy the dialouge box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);

Ive doen pretty much what you said burt now my program isnt working at all. The window comes up but instead of doing something when you click the button it just throws shit loads of exceptions. Heres my abridged code
// pp.java
// Grant Brown
// 22/02/02
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
// =========================================================
// Class:PP
// This class drives the Paper Round manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class pp extends JFrame implements ActionListener
// Container of customer objects (one object per customer)
private Vector customers = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// Delete and update button components.
private JButton delete;
private JButton update;
// Default constructor.
public pp ()
// Assign Contact Manager to title bar of frame window.
super ("Paper Round Manager");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save contacts and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveCustomers ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem. (One thing that you'll come to realize as
// you work with the AWT is that there are lots of bugs.)
JLabel l = new JLabel ();
getContentPane().add ("North", l);
// Place the names component in the center part of the
// frame window.
getContentPane().add ("Center", names);
// Create a panel object to hold four buttons.
JPanel p = new JPanel ();
JButton b;
// Add an Insert button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Insert"));
b.addActionListener (this);
// Add a Delete button to the Panel object and register
// the current cm object as a listener for button events.
p.add (delete = new JButton ("Delete"));
delete.addActionListener (this);
// The Delete button should be disabled until there is at
// least one contact to delete.
delete.setEnabled (false);
// Add an Update button to the Panel object and register
// the current cm object as a listener for button events.
p.add (update = new JButton ("Update"));
update.addActionListener (this);
// The Update button should be disabled until there is at
// least one contact to update.
update.setEnabled (false);
// Add a Finish button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new JButton ("Finish"));
b.addActionListener (this);
// Add the panel object to the frame window container.
getContentPane().add ("South", p);
// Set the background of the frame window container to
// lightGray (to give a pleasing effect).
setBackground (Color.lightGray);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setBounds (50, 100, 400, 200);
// Do not allow the user to resize the frame window.
loadCustomers ();
// Load all contacts.
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("Delete"))
delete ();
else
if (e.getActionCommand ().equals ("Finish"))
saveCustomers ();
System.exit (0);
else
if (e.getActionCommand ().equals ("Insert"))
insert ();
else
update ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new cm object and let it do its thing.
new pp ();
private void delete ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the customer item from the names component.
names.remove (index);
// Remove the Customer object from the contacts Vector
// object.
customers.remove (index);
// If there are no more customers ...
if (customers.size () == 0)
delete.setEnabled (false);
update.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void insert ()
// Create an Insert data entry form to enter information
// for a new contact.
DataEntryForm def = new DataEntryForm (this, "Insert");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Customer object and assign information from
// the form to its fields.
Customer temp = new Customer ();
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String
(def.phone.getText ());
// Add a new customer item to the names component.
names.add (temp.publication + ", " + temp.address);
// Add the Customer object to the contacts Vector
// object.
customers.add (temp);
// Make sure that the Delete and Update buttons are
// enabled.
delete.setEnabled (true);
update.setEnabled (true);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all customers from customers.dat into the customers
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// inserted into the names component - as a contact item.
// ===========================================================
private void loadCustomers ()
FileInputStream fis = null;
try
fis = new FileInputStream ("customers.dat");
DataInputStream dis = new DataInputStream (fis);
int nCustomers = dis.readInt ();
for (int i = 0; i < nCustomers; i++)
Customer temp = new Customer ();
temp.name = dis.readUTF ();
temp.publication = dis.readUTF ();
temp.address = dis.readUTF ();
temp.round = dis.readUTF ();
temp.phone = dis.readUTF ();
names.add (temp.publication + ", " + temp.address);
customers.add (temp);
if (nCustomers > 0)
delete.setEnabled (true);
update.setEnabled (true);
catch (IOException e)
finally
if (fis != null)
try
fis.close ();
catch (IOException e) {}
// Make sure that the first customer item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all customer objects from the contacts Vector object
// to customers.dat. The number of contacts are saved as an
// int to make it easy for loadCustomers () to do its job.
// ========================================================
private void saveCustomers ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("customers.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (customers.size ());
for (int i = 0; i < customers.size (); i++)
Customer temp = (Customer) customers.elementAt (i);
dos.writeUTF (temp.name);
dos.writeUTF (temp.publication);
dos.writeUTF (temp.address);
dos.writeUTF (temp.round);
dos.writeUTF (temp.phone);
catch (IOException e)
MsgBox mb = new MsgBox (this, "PP Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (IOException e) {}
private void update ()
// Obtain index of selected customer item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot update
// a customer if no customer item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the Customer object (from the
// customer Vector object) that is associated with the
// index.
Customer temp = (Customer) customers.elementAt (index);
// Create and display an update entry form.
DataEntryForm def = new DataEntryForm (this, "Update",
temp.name,
temp.publication,
temp.address,
temp.round,
temp.phone);
// If the user pressed Ok...
if (def.bOk)
// Update the customer information in the customers
// Vector object.
temp.name = new String (def.name.getText ());
temp.publication = new String (def.publication.getText ());
temp.address = new String (def.address.getText ());
temp.round = new String (def.round.getText ());
temp.phone = new String (def.phone.getText ());
// Make sure the screen reflects the update.
names.replaceItem (temp.publication + ", " + temp.address,
index);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first customer item in the names
// list is highlighted.
names.select (0);
// ========================================================
// Class: Customer
// This class describes the contents of a business customer.
// ========================================================
class Customer
public String name;
public String publication;
public String address;
public String round;
public String phone;
// ==========================================================
// Class: DataEntryForm
// This class provides a data entry form for entering customer
// information.
// ==========================================================
class DataEntryForm extends JDialog implements ActionListener
// bOk is a boolean flag. When true, it indicates that
// the Ok button was pressed to terminate the dialog box
// (as opposed to the Cancel button).
public boolean bOk;
// The following components hold the text that the user
// entered into the visible text fields.
public JTextField name;
public JTextField publication;
public JTextField address;
public JTextField round;
public JTextField phone;
public void actionPerformed (ActionEvent e)
// If the user pressed the Ok button, indicate this
// by assigning true to bOk.
if (e.getActionCommand ().equals ("Ok"))
bOk = true;
// Destroy the dialog box and return to the point
// just after the creation of the DataEntryForm object.
dispose ();
public DataEntryForm (JFrame parent, String title)
// Call the other constructor. The current constructor
// is used for insert operations. The other constructor
// is used for update operations.
this (parent, title, "", "", "", "", "");
public DataEntryForm (JFrame parent, String title,
String name, String publication,
String address, String round,
String phone)
// Initialize the superclass layer.
super (parent, title, true);
// Choose a grid bag layout so that components can be more
// accurately positioned. (It looks nicer.)
setLayout (new GridBagLayout ());
// Add appropriate first name, last name, phone, fax, and
// email components to the current DataEntryForm container.
// (Remember, DataEntryForm is a subclass of Dialog.
// Dialog is a container. Therefore, DataEntryForm
// inherits the ability to be a container.)
addComponent (this, new JLabel ("Name: "), 0, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.name = new JTextField (15);
addComponent (this, this.name, 1, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.name.setText (name);
addComponent (this, new JLabel ("Publications: "), 0, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.publication = new JTextField (15);
addComponent (this, this.publication, 1, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.publication.setText (publication);
addComponent (this, new JLabel ("Address "), 0, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.address = new JTextField (15);
addComponent (this, this.address, 1, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.address.setText (address);
addComponent (this, new JLabel ("Round No "), 0, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.round = new JTextField (15);
addComponent (this, this.round, 1, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.round.setText (round);
addComponent (this, new JLabel ("Phone Number "), 0, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.phone = new JTextField (15);
addComponent (this, this.phone, 1, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("Update"))
this.phone.setText (phone);
addComponent (this, new JLabel (""), 0, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
addComponent (this, new JLabel (""), 1, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
JButton b;
// Add an Ok button to this container.
addComponent (this, b = new JButton ("Ok"), 0, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Add a Cancel button to this container.
addComponent (this, b = new JButton ("Cancel"), 1, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Set the size of the dialog window to 250 pixels
// horizontally by 200 pixels vertically.
setSize (250, 200);
// Do not allow users to resize the dialog window.
setResizable (false);
// Make sure that the dialog window is visible.
setVisible (true);
private void addComponent (Container con, Component com,
int gridx, int gridy,
int gridw, int gridh, int fill,
int anchor)
// Get the current layout manager. It is assumed to
// be a GridBagLayout object.
LayoutManager lm = con.getLayout ();
// Create a GridBagConstraints object to make it
// possible to customize component positioning.
GridBagConstraints gbc = new GridBagConstraints ();
// Assign the x and y grid positions.
gbc.gridx = gridx;
gbc.gridy = gridy;
// Assign the number of grid blocks horizontally and
// vertically that are occupied by the component.
gbc.gridwidth = gridw;
gbc.gridheight = gridh;
// Specify the component's resize policy (fill) and
// the direction in which the component is positioned
// when its size is smaller than available space (anchor).
gbc.fill = fill;
gbc.anchor = anchor;
// Set the new constraints that the grid bag layout
// manager will use.
((GridBagLayout) lm).setConstraints (com, gbc);
// Add the component to the container.
con.add (com);
// ===========================================================
// Class: MsgBox
// This class displays a message box to the user. The message
// is usually an error message. The user must press the Ok
// button to terminate the message box.
// ===========================================================
class MsgBox extends JDialog implements ActionListener
public void actionPerformed (ActionEvent e)
// Terminate the dialog box in response to the user
// pressing the Ok button.
dispose ();
public MsgBox (JFrame parent, String title, String msg)
// Initialize the superclass layer.
super (parent, title, true);
// Store the msg argument in a Label object and add
// this object to the center part of the dialog window.
JLabel l = new JLabel (msg);
add ("Center", l);
// Create a Button object and add it to the south part
// of the dialog window.
JButton b = new JButton ("Ok");
add ("South", b);
// Make the current object a listener to events that
// occur as a result of the user pressing the Ok
// button.
b.addActionListener (this);
// Make sure that the Ok button has the focus.
b.requestFocus ();
// Do not allow users to resize the dialog window.
setResizable (false);
// Allow the layout manager to choose an appropriate
// size for the dialog window.
pack ();
// Make sure that the dialog window is visible.
setVisible (true);
}

What is the main difference between menu_exits and user_exits

what is the main difference between menu_exits and user_exits

Hi,
User Exits:
A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Menu Exits:
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Regards,
Priyanka.

What is the difference between SWF and F4V in the context of Streaming or progressive Download?

Hello everybody,
I am absolutely a beginner in working with Captivate and furthermore my technological know how is not that good.
So, I have problems to understand if the export formats SWF and F4V are both capable to be published in the Internet as streaming video and as progressive Download? Well so, I do not really understand the difference between streaming and progessive download either?
Furthermore I was asking myself if this issue depends on how I imported flash videos (there are these two options) in my Captivate project during the production phase?
I would be very thankful for some helping information!
Greetings,
Mareike the beginner

Welcome to our community
I'm not certain I fully understand the differences myself, but will toss out what I believe to be true about the formats. Hopefully, if I'm incorrect in my bellief, someone with more definitive knowledge will chime in.
It was explained to me a couple of years back and is my understanding that "streaming" only applies to a video based format such as F4V, FLV and it doesn't apply to SWF. With SWF, you may specify a preload value. So when the SWF transmits from the web server to the PC, a certain percentage has to be received before play begins. But that's not streaming. It's preloading.
For streaming to occur, the web server establishes a communication channel between the server and the destination PC. This channel is monitored to see what speed is in use. Only enough information is then transmitted to be comfortable at that speed. If the speed improves during the connection, the server serves data at a faster rate. If the connection degrades, the information transmitted is also scaled back so as to accommodate the lower speed.
With SWF, after it has all been downloaded, a savvy user is able to poke around in their temporary internet files and save the SWF for play later. With streaming, this isn't possible because as the stream is viewed, it evaporates from memory.
Seriously hoping others will chime in here to confirm or deny this.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

Difference between continue and Exit ........?

Difference between continue and Exit ........

See a small example CONTINUE below with some notes:-
When Nothing to Do, CONTINUE: - In Oracle Database 11g PL/SQL has a new construct called CONTINUE, which is used in a loop. The statement moves the logic to the end of the loop and then to the beginning of the loop.
Eg:
begin
        for ctr in 1..100 loop
                continue when mod(ctr,10) != 0;
                dbms_output.put_line ('ctr='||ctr);
                  Continue Skip the executions of statements after this clause Like for numbers, those are not a multiple of 10. And comes to end loop then to start of loop
        end loop;
end;
Here is the output:
ctr=10
ctr=20
ctr=30
... and so on ...EXIT take you out of LOOP from current iteration and that will be last iteration.
Thanks!

Difference Between HashMap and HashTable

Difference Between HashMap and HashTable
Please explain with an example

I have a situation in Java Collection and i am not
able to figure a good solution. I am scared about the
performance and memory that wil be used
I have 5 List objects with thousands and thousands of
records in it. The List is populated by a database
query using jdbcTemplate which return like 200,000
records
Each record is identified by POLICY_ID. They may be
List with multiple records for a POLICY_ID
I want to extract each POLICY_ID from all the 5 List
and make a single List object for each POLICY_ID and
for each List and pass it to a print job which will
print the data for a POLICY_ID
Example
Let say we have POLICY_ID = 15432
List1 has one record for 15432
List2 has one record for 15432
List3 has one record for 15432
List4 has three record for 15432
List5 has three record for 15432
From the 200,000 records in List1 i want to generate
a seperate list with 1 record for policy id 15432 and
let name is Listperpolicy
after this logic we have
Listperpolicy1
Listperpolicy2
Listperpolicy3
Listperpolicy4
Listperpolicy5
call print job ( Listperpolicy1, Listperpolicy2,
Listperpolicy3, Listperpolicy4, Listperpolicy5)
Please let me know
Thanks a Lotttttttttdon't worry about performance until you've got a working application. second-guessing what the performance bottlenecks will be is futile

Difference between upgrdae and migration about oracle database

Difference between upgrdae and migration about oracle database
please give the comments

Well, the question is almost philosophic... 
In 9i, there is a Migration Guide whereas in 10g there is a Upgrade Guide. 
Furthermore, in 9i, there is the command line startup migrate whereas in 10g that's startup upgrade.
Somebody think upgrade when go to new release, and migration when go to new version. 
Others think upgrade when new version replace database in place, and migration when new version include a move of database. 
Another point of view is : upgrade is for technical, and migration for application/data. 
 
Well, after these explanations, your upgrade/migratation notion will not be more clear, but I think that is not very important, only a terminology game. The most important is to know what you need : new version or new release. 
 
Nicolas.

ABST2 - Differences between Assets and G/L accts

Hi Experts
We are working on ECC 6.0 and INR is our local currency.
At the end of FY 2007 by mistake direct postings were made to Dep Fund Account which is a Recon a/c and FY 2007 was closed
And because of which FI-GL and FI-AA doesnt match by INR 37353.71 (amt posted in above doc) as shown in ABST2
I've referred SAP notes 104567 & 69225 and found the note 69225 relevant to follow as the difference has not resulted in the current or open years.
So we have passed direct entry which is exactly the reversal of entry posted above using ABF1 (INR -37353.71)
After posting the 2nd document, in ABST2 another line has appeared of INR -37353.71. Although the sum for my recon GL is now zero.
The output of ABST2 is as below now -
Sc Acct no.   BusA Year SG 1st local difference LCurr Doc.no.    Period
AS 31100                2009               37,353.71-        INR     W004
AS 31100                2009               37,353.71         INR     W004       999
When I come out of ABST2 , addition to 1st, error no 2 is also coming which I thought would disappear.
1.Differences between assets and G/L accts in the balance carried forward
     Message no. MQ555
2.Differences between assets and G/L accounts at the key date
     Message no. MQ557
Is still something else needs to be done?
Or can I move ahead as the summation of the difference is now zero?
Please suggest.
Kapil

We referred to SAP and they suggeted that the tagging of W004 in both the lines means that now there is no error even system prompts it as error.
So we continued with the transactions and after closing the FY 2009, today when we run ABST2, we dont get any error messages as there is no difference left between Assets & GL.

Difference between paint() and paint() after resize

Similar Messages

Maybe you are looking for