Difference between parameter id SAG and VRT

Hello ABAP Experts,
I just want to know your insights why when i set my parameter id to vrt it will not skip the first screen of tcode me39 but when i set it to sag it will skip the first screen of me39. When i check the parameter id of tcode me39 it was set to vrt only and sag is not displayed.
CAn anyone enlightened me with this? thanks
Rewards will be given.

I am working on ECC6.0
when Using the Parameter id VRT it is working fine for me. and other SAG is also working fine.Ideally we should use VRT , since it is directly linked it should work.
The reason is check this,,, in the iclude
MM06EO0D_D0205_GET_PARAMETER
MODULE D0205_GET_PARAMETER OUTPUT.
* Belegnummer über Parameter-Id nur holen, wenn noch nicht anderweitig
* vorbelegt ist (z.B. in ME38-Aufruf aus ME57)
   CHECK RM06E-EVRTN EQ SPACE.                                "4.0B TK
   CASE T160-BSTYP.
      WHEN BSTYP-KONT.
         GET PARAMETER ID 'CTR' FIELD RM06E-EVRTN.
      WHEN BSTYP-LFPL.
         GET PARAMETER ID 'SAG' FIELD RM06E-EVRTN.
      WHEN SPACE.
         GET PARAMETER ID 'VRT' FIELD RM06E-EVRTN.
   ENDCASE.
ENDMODULE.                 " D0205_GET_PARAMETER OUTPUT
Regards
Vijay babu Dudla

Similar Messages

What is the difference between parameter and parameters

hi everybody
what is the exact difference between parameter and parameters

Hi,
As far as selection-screens are concerned, the word PARAMETERS and PARAMETER is the same. I just tried it. Below is an example:
**PARAMETERS**
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs TYPE t001-bukrs OBLIGATORY,
            p_asof TYPE bsis-budat OBLIGATORY,
            p_year TYPE bsis-gjahr OBLIGATORY.
SELECT-OPTIONS: s_hkont FOR bsis-hkont NO INTERVALS OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
**PARAMETER**
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER: p_bukrs TYPE t001-bukrs OBLIGATORY,
            p_asof TYPE bsis-budat OBLIGATORY,
            p_year TYPE bsis-gjahr OBLIGATORY.
SELECT-OPTIONS: s_hkont FOR bsis-hkont NO INTERVALS OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
Hope this helps...
P.S. Please award points for useful answers by clicking on the star on the left.

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between Wsus 3.0 and Wsus 4.0

Hi all,
I would like to know what are differences between Wsus 3.0 and Wsus 4.0.
I have already notice that for Local Publishing, the method IPublisher.PublishPackage(sourcePath,
additionalSourcePath, packageDirectoryName), totally ignore the "additionalSourcePath" parameter.
Are there any documentation or web site where I can find differences between Wsus 3.0 and 4.0 ?
Thanks.
David COURTEL
IT Technician
Wsus Third-Party Softwares Publishing :
http://wsuspackagepublisher.codeplex.com

I would like to know what are differences between Wsus 3.0 and Wsus 4.0.
The differences between WSUS v3 and WSUS v6 (please note the correct version number) are documented ... somewhere ... but at the moment I can't find them. (Presumably it would be in the Release Notes for Win2012, but that idea is a bust.)
In short, these are the notable distinctions:
WSUS v6 is compiled with the .NET Framework v4
WSUS v6 provides an extended interface for management via PowerShell
WSUS v6 supports SHA256 hashes (which were implemented by the WUAgent v7.8 and rolled back to the WUAgent v7.6 in KB2720211 and WSUS v3.2 in KB2734608)
I have already notice that for Local Publishing, the method IPublisher.PublishPackage(sourcePath, additionalSourcePath, packageDirectoryName), totally ignore the "additionalSourcePath" parameter.
Changes to the API should be reflected in the
SDK.
Also worth of note.. publishing TO a WSUS v6 server must be performed from a Windows Server 2012 system or a Windows 8 system with RSAT. Publishing to a WSUS v6 server from a WSUS v3.2 console cannot be done due to internal dependencies in the Local
Publishing API on the build number of the console and server involved in the publishing process.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Distribution (2005-2013)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Difference between At selection-screen and At selection-screen field

I need to know the difference between
Difference between At selection-screen and At selection-screen field
Regards
Shashi

Hi,
AT SELECTION-SCREEN is the event triggered in the PAI of the selection screen.
AT SELECTION-SCREEN on field field_name is the event specific to the field and is triggered when u press enter in that field.
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
SELECTION-SCREEN FIELD SELECTION
FOR {NODE|TABLE} node [ID id].
Effect
This statement defines a node node in the structure of the logical database for field selection. If a node belongs to type T, you can use the TABLE addition instead of NODE. The statement cannot be used for type C nodes. .
If a node is defined for field selection, you can use an executable program linked to the logical database in the GET statement to control which fields in the node are to be read by the logical database. If you use the function module LDB_PROCESS, the FIELD_SELECTION parameter must be specified accordingly.
for more details check this link...
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/frameset.htm
Regards,
Priyanka.

Time difference between the Identity system and Access System: OAM

I was installing OAM. Performed the below steps.
-installed identity server
-installed webpass
-setup of identity system console
-installed policy manager
-setup of access system console
The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
The Identity Server, WebPass and Policy Manager are installed on the same machine.
Userdata repository: OVD 10.1.4.3
Policy and Config Data Repository: OID 11.1.1.3
OAM: 10.1.4.3
Windows2008 - 64bit
Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
Any idea on this error. Please Advise.
Thanks in advance.

Try this::
Check Time Difference Between Identity and Access Manager Systems
Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

What is the Difference between Price List , Modifier and Qualifier ?

Hi All,
What is the difference between Price List , Modifier and Qualifier ?
What are tables affected and joins ?
Thanks in advance

Hi Selva,
If you look at the parameters,you can see more options in GRID.The following are those extra options which you cannot see in LIST.
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
If the caller specifies an EXIT routine, this routine must have the following form:
FORM top_of_page.
Module REUSE_ALV_COMMENTARY_WRITE can then be called within the EXIT routine. This module is responsible for formatting the header information and also ensures online HTML formatting. In the print preview or in batch mode, the text passed is then output in the normal format.
If module REUSE_ALV_COMMENTARY_WRITE cannot be used, you must use two parameters instead. In I_CALLBACK_TOP_OF_PAGE you pass the form routine that is responsible for normal formatting in batch mode or in the print preview mode. The form routine that is responsible for online formatting, is passed in parameter I_CALLBACK_HTML_TOP_OF_PAGE. If one of these parameters is not filled, top-of-page is not output in the respective mode.
In function module documentation,if you click those parameters,you can see the explanation.
If you need more information,get back.Otherwise,kindly close the thread by rewzarding points for useful replies.
Mueksh Kumar

Difference between "return this.var" and only "return var"

What is the difference between
get()
return variable;
and
get()
return this.variable;
}

class Foo {
int bar = 0;
public int doStuff(int bar) {
    bar *= 2;   //refers to the parameter bar
    return bar; //also refers to the parameter bar
public int doStuffToo(int bar) {
    bar *= 2;          //refers to the parameter bar
    return this.bar; //refers to the instance variable bar declared above
public static void main(String[] args) {
    Foo f = new Foo();
    System.out.println(f.doStuff(5));      //outputs 10
    System.out.println(f.doStuffToo(5)); //outputs 0
}

What is the difference between on new focus and do prepare out put methods

Hi,
what is the difference between on new focus and do prepare out put methods.

Hi Divya,
DO_PREPARE_OUTPUT method is triggered each time the view is prepared after each event. Normally we redefine this method in order default the initial values based upon the parameter iv_first_time = 'X'. There can be certain other scenarios like putting data validations where this method can be helpful.
For details on ON_NEW_FOCUS, refer to this [thread|on_new_focus event;
Thanks
Vishal

What is the Difference between ? new Operator and Class.forName() ???

plz tel me ....
what is the Difference between ? new Operator and Class.forName() ??? ........

Class.forName(), takes the class name as parameter,
and loads that class in memory. But it doesn't create
any instance of that class.
That means static methods/variables are available for
use.
new keyword, checks if the class is loaded, if not
then loads that class, and then creates an instance
of that class.Class.forName actually returns the class object for that name (class - for -name). it might load it, if the class hasn't already been loaded, but it's misleading to say that's what that method does
your definition of 'new' is wrong, too. give the dukes back

The difference between VGA, DVI-D and ADC?

Hi.
The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
Thank you for your input.
Walter

Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
 Cheers, Tom

The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

Hi,
Anyone know what is the difference between AIR-ANT5135D-R and AIR-ANT5135DB-R ?
From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference Guide"
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Inside the document there is only AIR-ANT5135D-R.
likewise for the 2.4 GHz, AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference Guide"
Any help would be appreciated
Thanks,
Richard

Found the difference, AIR-ANT5135DB-R and AIR-ANT2422DB-R are non-articulating antennas.
Thanks!
Richard

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

Difference between parameter id SAG and VRT

Similar Messages

Maybe you are looking for