Difference between Real User Experience Insight and Webalizer?

Dear All,
Can u tell me that is there any difference between Real User Experience Insight and Webalizer?
If both are functioning almost same then why RUEI is expensive
Please must reply

Webalizer uses Web Server logs however RUEI does not use web server logs it monitors Network Traffic without interfering in application which does not affect application performance...
For using Webalizer Application code is modified but not in the case of RUEI
The most important one is that Webalizer does not provide Sufficient and Efficient information as does the RUEI because it can replay the whole session called FULL SESSION REPLAY, Which helps finding errrors on specific pages. Also helps finding delays in transactions.
RUEI is deployed either by copy port or Tapping which create duplicate copy of each request to web server and pass it to RUEI for Analysis
Regards
Ali Asadullah

Similar Messages

Difference between PDF user's password and PDF owner's password?

What is the difference between PDF user's and owner's passwords? When creating a document, which one to use?

The user password, if set, is what you need to provide in order to open a PDF. Acrobat/Reader will prompt a user to enter the user password. If it's not correct, the document will not open.
The owner password, if set, controls permissions, such as printing, editing, extracting, commenting, etc. Acrobat/Reader will disallow these things based on the permission settings. Acrobat will require this password if you want to set/change permissions.

How to determine the difference between a user sent mail and an auto-sent mail by another program?

Hi,
I am currently capturing the item_send event in an Outlook (2010/13) addin which then processes the email before it sends. Will this event fire for an email that is generated and sent automatically, i.e. without the user clicking the send button? For
example there may be another addin installed that emails hourly logs somewhere, or gives the user an option click another button to send a generated email to their support team.
Ideally, I would like my addin code in the item_send event to only run when the user has purposely sent the email themselves from a draft email by clicking the send button.
Thanks in advance,
Tom

I see the following idMso value in the Office 2013 Help Files: Office Fluent User Interface Control Identifiers files:
SendDefault
button
None (Core Tab)
TabNewMailMessage
GroupSend
2617
The <commands> section should be placed in the ribbon XML with your custom UI. See Temporarily
Repurpose Commands on the Office Fluent Ribbon for more information in the MSDN documentation.

Differences between Robot class generated events and real input events

Hello everyone!
I'm having a problem with the translation of the description of the awt.Robot class.
- "This class is used to generate native system input events" -
Does this mean there is no difference between real input events and generated events from the Robot class? Difference in reference to that the generated events can't be recognized as generated events by the os or programs.
Thanks in advance.
Chris B.

The Robot class will use an interface provided by the operating system to inject events. Those are very close to 'real' input events, but not quite there. There are, for instance, several games out there which have a protection mechanism against Robot's events to prevent scripting/botting. However, any application that is not paying special attention to the event's source will assume that the input events generated by Robot are actually coming from the user, so you can 'control' any application with the exception of the beforementioned games.

DIFFERENCE BETWEEN REAL ORDER AND STATISTICAL ORDER

Dear gurus,
What is the main Difference between Real Orders and Statistical order?
Thanks in advances.
Babu.

Hello,
Note: Please search the forum before posting a new thread.
The following link may be useful.
Re: Statistical & Real Posting
Regards,
Ravi

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Difference between SAP R/3 , mySap and ASAP

Hi all
Please tell what is clear Difference between SAP R/3 , mySap and ASAP
Thanks in advance

hi Naresh,
SAP R/3--
   SAP R/3 is SAP's integrated software solution for client/server and distributed open systems. SAP's R/3 is the world's most-used standard business software for client/server computing.
R/3 stands for Real Time and 3-tier architecture.
mySAP --
            In SAP's words "mySAP.com is an open collaborative business environment of personalized solutions on demand"
In our words, mySAP.com is actually a collection of three things.
a) The Marketplace is a website where buyers and sellers can register themselves, and then buy and sell from each other.
b) The Workplace is a piece of software which sits on your desktop, and allows you (after ity is setup correctly) to gain access to all of the systems you use in your company. It is, naturally, tightly integrated with both SAP and the Marketplace.
c) mySAP.com is also the umbrella name for all of SAP's internet-enabled applications.
ASAP--
      ASAP (AcceleratedSAP) is a step-by-step methodology for speeding up the implementation of an SAP R/3 system. The components of ASAP, which can be used together or individually, are called accelerators. Accelerators are based on the best practices of SAP customers from around the world and consist of a number of templates, questions, and scenarios that require user input to help the user determine the best way to implement their R/3 system. According to SAP literature, ASAP can reduce the time required to implement an R/3 system by as much as 50%.
If helpful, reward points...
Regards,
~Srikant.

Difference between the TABs "All Content" and "Discussions" on the new forum?

Hi,
Does anyone know the difference between the TABs "All Content" and "Discussions" on the new forum? They seem to be the same. I'm confused.
Petey

Petey,
Though I was part of the forum update beta, there was some that we could not effectively test, plus some aspects (like "Like"), that some liked, but others did not. That sort of thing happens.
Also, now that we have the full version, and all servers are synced, there will probably be things that the beta testers did not get to experience. We will all be learning, in the process too. Also remember, much of the new forum software was provided by Jive, and though many of us commented (pros and cons), only so much could be addressed. It was not quite like doing a beta on Adobe software, as there was a complete, separate layer in between.
So far, what I see looks close to what we saw a few weeks (months?) ago. Now, I need to really put the real software through its paces, to see what got changed from then, until now.
Good luck,
Hunt

Differences between Hyperion Workspace, Web Analysis and Financial Reportin

Hello,
Can anybody explain me the differences between Hyperion Workspace, Web Analysis and Financial Reporting?
Thank you

In real simple terms....
Financial reporting - Perfect for producing standardised monthly reporting such as P&L, balance sheets etc. Highly formatted, print well in PDF format.
Web Analysis - Highly graphical, web based analysis tool more suited to dashboards, pinboards etc with slice and dice capability.
Workspace - Common environment where reporting content in deployed. Users can access web anlysis, fin reports, Interactive reports plus other content through the workspace. It was the start of the 'log on to one place for all reporting' concept instead og logging on to multiple products.
Hope that helps
Regards
CD

Difference between F.35 Receivables amount and FBL5N report open items

Hi All,
There is an amount difference between f.35 receivables amount and fbl5n open items amount, I have observed that there are some changes to credit master like risk category and credit representative group, so I thought if we run f.28 it will be right but still difference exits.
If anybody has come across similar issue or if you have any idea on this on how to analyze, please let me know.
Regards,
RK.

Hi ,
Please check the time horizon in credit check used. then compare it with FBL5n.
May be there will be difference in comparison period.
Program RFDKLI20 or F.28 is to run when there is changes in Assignment from company code, entry in customer master data, entry in sales area data, user exit., currency of credit control area , Assignment of customers to credit accounts.
And
Program RVKRED09.--> only the risk class was changed it is sufficient to run
Regards
Atul

Difference between checking Objects in SU24 and in ABAP code

Hi all,
What is the difference between objects checked in SU24 and the objects checked in ABAP Code.
I think if objects are even checked to No in SU24 and they are in ABAP code then user is able is able to execute that object, is this correct?
and vice versa, if objects are checked to yes in su24 and not in the ABAP code then user wont be able to excute? is this correct
or what is the purpose of maintaing objects both in SU24 and in ABAP Code.
Thanks,
Sun

This is what is known in German as a "Schwerer Geburt"... (not sure whether there is an English term which has the same meaning)...
When you searched, did you read this thread?:
F110 - S_BTCH_ADM
>
Julius Bussche wrote:
> My understanding of this confusion is ...
>
> ... SAP's development systems deem an "unknown" check to be successfull until specifiied for a check (this is different in customer systems - which leads many to believe that adding and removing check indicators from SU24 will add and remove authority-checks....),
>
> ...This problem then reproduces itself both in SU53 and ST01 once the SU22 / SU24 error has been made.
>
> ...It is one of those things which you need to know or find on your own (not too difficult), otherwise you simple don't know it.
It is context specific, when the context is known to the customer system where the code is running => You cannot activate a check in SU24 if it is not coded anywhere (please distingish between starting a transaction, using it, and navigating further from that transaction...). The only case where SAP does what you seem to be assuming (or hoping for...) is infact to turn an authority-check off in some cases or to make the calling context known when it is remote (in which case sy-tcode or the entry point context is not known)...
*It is not to turn the check on when it is not coded anywhere!!!
Perhaps you would like to phrase your final question just one more time.
Cheers,
Julius

What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?

Hi,all!
What is the difference between j2sdk1.4.1_03/jre and j2re1.4.1_03?
Why there have two JRE? Which one we should use?

JRE - Java Runtime Enviroment, what you stick on the end-user computers - http://www.java.com
SDK - Software Development Kit (aka JDK - Java Developer Kit) - http://java.sun.com

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

What is the difference between version 4.7 EE and ECC 6.0 in SD module.

Hi SAP Gurus,
what are the features in 4.7 EE version in general.
what are the features in ECC 6.0 version in general.
then give me the exact difference between version 4.7 EE and ECC 6.0 in SD module.
if u give the information, then u will get the rewards.
Regards,
somu.

Hi Somu,
These are additional enhancements avialble in ECC6.0 other than that remaining same as 4.7E
1.E-Commerce:- SAP ERP provides powerful e-commerce capabilities that can be expanded in an easy, cost-effective manner in line with business growth. Organizations can run a complete sales process on the Internet, and provide business-to-business (B2B) and business-to-consumer (B2C) customers with personalized and interactive online self-services.
2.Mobile Sales for Handhelds:-SAP ERP enables sales professionals to access front- and back-office business processes and to manage critical sales activities in the field using standard PDAs or other handheld devices (including those with bar code scanners). In this area, SAP ERP provides the following functions:- Customer managementWith SAP ERP, sales professionals may enter, view, and modify detailed customer information, and view sales order history for each customer.- Sales order managementSAP ERP enables sales staff to take sales orders via bar code scanners; search, create, and modify sales orders; and list or sort sales order partners.- Material managementSupport for material management for mobile sales enables staff to view material lists or details for a specific material, search material, and display customer-specific prices.
3.Resource-Related Down Payments and Billing:-- Supports creation of down-payment requests analogous to the functions offered by resource-related billing- Enables organizations to bill the requesting company code for services provided via a resource-related billing document.
4.SAP Beverage Functions Available for the Consumer Products Industry:- As of SAP ERP Central Component (SAP ECC) 5.00, the following functions from the SAP beverage industry solution are available for the consumer products industry:* SAP ECC 5.00, consumer products (EA-CP 500)- Material sorting- Extra charge- Empties management- Part load lift orders- Pendulum list indirect sales- Sales returns- Excise duty* SAP ECC 5.00, supply chain management extension (EA-SCM 500)- Direct store delivery back-end- Master data- Visit control- Transportation planning (including loading units, aggregation categories)- Vehicle space optimization- Output control (including valuated delivery note)- Route accounting (including tour data entry, cash payer, route settlement)* SAP ECC 5.00, industry-specific sales enhancements (EA-ISSE 500)- Extended rebate processing.
5.Credit Management:-Integrating sales and distribution (SD) credit management with SAP Credit Management application:With SAP ERP 6.0 application, you can also use SAP Credit Management in SAP Financial Supply Chain Management set of applications (FIN-FSCM-CR) to perform all credit checks and commitment updates for all areas of sales (SD-BF-CM). In SAP Credit Management, you can update the data from multiple systems. This enables you to execute credit checks with consistent data in distributed systems, too. Furthermore, you can connect to external credit information providers by extensible markup language (XML) interfaces. Alternatively, you can continue to use SD Credit Management (SD-BF-CM).
6.E-Commerce: Catalog Management :-As of SAP ERP 6.0 application, you must carry out product catalog replication from your ERP solution to the Text Retrieval and Information Extraction (TREX) server for use in the Web shop, using the report ISA_CATALOG_REPLICATION.
7.E-Commerce: Quotation and Order Management:- Order creation with reference to a contract that has been displayed* Lock of sales documents to avoid concurrent access during the order change process* Display of bills of material in the shopping basket* Free goods processing* Processing of grid products for the SAP Apparel and Footwear application* One-step business order processing* Selection of multiple transaction types in the shopping basket* Credit card support in business-to-business (B2B) Web shop* Material number format conversion* Maintenance of delivery priority in the shopping basket (B2B)* Document search for all documents across all sales areas* Interprocess communication-characteristic value display in basket and order confirmation
8.E-Commerce: Selling Over eBay:-Creation and management of product listings on eBay leverages the e-commerce order management and fulfillment capabilities of the SAP ERP application by easily tying existing tax, pricing, shipping, and payment configurations to post-auction processing. Enhancements in 2005: * You can use the business-to-consumer (B2C) checkout instead of the eBay checkout. With the B2C checkout, you can maximize cross-selling and up-selling opportunities by leveraging B2C functionality, determine tax and shipping using the elaborate methodologies available through condition techniques in SAP ERP 6.0. * E-mail notification scenario: winner notification to keep the auction winner updated with the status of the auction and of his or her order * Monitoring through features such as single-activity trace (SAT), heartbeat, and logging * Creation and publishing of multiple-item auctions and manual retraction of winners
9.E-Commerce: User Management:-- Web-based user management for business-to-business internet users - Assignment of authorization roles to users in web-based user management - Automatic migration of SU05 to SU01 internet users
10.Enterprise Services in Sales Order Management:-Please check in the Enterprise Services Workplace site which enterprise services are available for sales order management on the SAP Developer Network site (www.sdn.sap.com).
11.Internet Pricing and Configurator (IPC):-The IPC is enhanced and integrated to allow configuration within the sales documents of the SAP ERP application reusing existing model data while leveraging its improved functionality and advanced user interface within SAP ERP.
12.Price Catalog (PRICAT): Inbound Processing (Retail):-Inbound message processing of PRICAT essages:As of SAP ERP Central Component enterprise extension retail 6.0 (EA-RET 600) component, you can create and change article data automatically, or in an interface for mass data handling. The system takes both single and generic articles and bills of material and prices into account.
13.Rebate Condition Records Using Scales:-As of SAP ERP 6.0 application, you can set up rebate agreements so that the scale base value and the rebate scale level is derived from the total sales volume of multiple condition records. You do this by grouping condition records in the rebate agreement.
14.SAP Role: Internal Sales Representative:-SAP role internal sales representativeThis role delivers all the functions to fulfill the requirements of an internal sales representative. This includes tasks such as answering phone calls from customers and prospective customers, processing incoming inquiries and sales orders, and preparing quotations and sales contracts.Target groupThe responsibilities of an internal sales representative (or customer service representative) include the following:- Answering phone calls from customers and prospective customers- Answering product, price, and order status related questions- Processing incoming inquiries and sales orders- Preparing quotations and sales contracts- Taking sales orders and ensuring successful order processing for example, taking care of the completeness of sales documents, releasing delivery-blocked orders, and so on - Support for the outside sales force for example, checking on quotations, updating customer master data, and so on- Preparing reports and sales analyses for the sales manager and the sales teamWork overview This work center gives you an overview of your daily work and gives you easy access to your most important tasks. Sales documents This work center allows you to work on all your sales documents. You can create and maintain inquiries, quotations, sales orders, sales contracts, scheduling agreements, and billing documents. Order fulfillment This work center allows you to monitor order fulfillment. You can display deliveries, backorders, and shipments, and can check product availability.Master data This work center enables you to work on all your master data. You can create and maintain business partners, customer agreements, prices and conditions, and products.
I hope it will help you
Regards,
Murali.

What is the difference between the normal function module and bapi function

hi,
what is the difference between the normal function module and bapi function module.

Hi
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Regards
Anji

Difference between Real User Experience Insight and Webalizer?

Similar Messages

Maybe you are looking for