Difference between Sampling Procedure and Sample-drawing procedure

Friends,
I am new to QM and started learning QM Module. My doubt is what is the difference between Sampling Procedure and Sample-drawing procedure?
The reason for my doubt is, we can determine the sample quantity with Sampling procedure itself. then what is the need of sample-drawing procedure?
Also describe primary, pooled and reserved samples.
Regards,
IMIMINT

Hi,
Sampling Procedure
Definition
A procedure that contains the rules for determining the sample size for an inspection. The sampling procedure also specifies the type of valuation to use for results recording (attributive, variable, or manual).
Use
You assign a sampling procedure to each characteristic in an inspection plan to calculate the sample size.
Sample-Drawing Procedure
Definition
A master data object in which you plan the drawing of physical samples. In the sample-drawing procedure, you specify:
Which categories of physical samples must be drawn
How many physical samples must drawn
The size of each physical sample
Whether the drawing of physical samples must be confirmed
Use
The system uses the information in the sample-drawing procedure together with the information in the inspection plan to calculate the physical sample sizes, and to create physical-sample records when an inspection lot is created.
Primary Sample : It is the sample drawn from the lot directly.
Pooled Sample : It is the sample whcih is combination of 2 or more primary samples.i.e. primary sample sfrom say 3 differetn drums is mixed and tested.
Reserved Sample :sample which is preserved for the testing in future.
or in other words
Primary samples (1st stage)
Physical samples drawn directly from a material or batch that will be inspected or used to create pooled samples.
Pooled samples (2nd stage)
Physical samples to be created by mixing the contents of two or more primary samples from the same material or batch.
Reserve samples
Primary physical samples drawn from a material or batch reserved for future inspection.
Vishal
Edited by: VISHAL JONNALWAR on Feb 4, 2010 6:43 AM

Similar Messages

Difference between scan rate and sampling rate? what is meant by throughput/maxt

want to know the difference and meaning of sample rate and scan rate ? what is meant by throughput and maximun throughput

Hello;
There is a really good KnowledgeBase at NI web site that talks about these definitions and differences.
The KnowledgeBase ID number is 2D6CTML8.
Hope this helps.
Filipe

All differences between a function and a procedure.

What are All differences between a function and a procedure.

What are All differences between a function and a procedure.This is basic procedural programming fundamentals that you should learn at school.
A function is a procedure that returns a value (of the type defined in the function declaration) using the RETURN statement at the terminal point of the processing code.
That's the only difference.
In terms of SQL, procedures cannot be used within SQL and functions can, but only if the function does not contain any OUT or IN OUT parameters and the return type is of a supported SQL type.

Conflict between the saved data and the sampling rate and samples to read using PXI 6070e

Hello, I am using PXI 6070e to read an analog voltage. I was sampling at 6.6 MHz and the samples to read were 10. So, that means it should sample 10 points every 1.5 um. The x-axis of the graph on the control panel was showing ns and us scale, which I think because of the fast sampling and acquiring data. I use "write to measurement file" block to save the data. However, the data was saved every 0.4 second and as 35 points data at the beginning of each cycle (e.g. 35 points at 0.4 sec and 35 at 0.8 sec, and so on) and there was no data in between. Can anyone help me how there are 35 reading points every cycle? I could not find the relation between the sampling rate and samples to read, to 35 points every 0.4 second!
Another thing, do I need to add a filter after acquiring the data (after the DAQ assistant block)? Is there anti-aliasing filter is built in PXI 6070e?
Thanks for the help in advance,
Alaeddin

I'm not seeing anything that points to this issue. Your DAQ is set to continuous acquire. I'm not sure if this is really what you want because your DAQ buffer will keep overwriting. You probably just want to set to Read N Samples.
I'm not a fan of using the express VIs. And since you are writing to a TDMS file, I would use the Stream to TDMS option in DAQmx. If you use the LabVIEW Example Finder, search for "TDMS Log" for a list of some good examples.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

What is difference between Managed Bean and Backing Bean?

What is difference between Managed Bean and Backing Bean? Please guide me how to create them and when to use them?
Please post sample for both beans.

Hi,
managed beans and backing beans are quite the same in that the Java object is managed by the JavaServer Faces framework. Manage in this respect means instantiation. The difference is that backing beans contain component "binding" references, which managed beans usually don't. Do backing beans are page specific versions of managed beans.
Managed beans are configured either in the faces-config.xml file, or using ADF Faces and ADFc, in the adfc-config.xml file
Frank
Edited by: Frank Nimphius on Jan 31, 2011 8:49 AM

What is difference between table space and shchema

what is difference between table space and shchema ?

784633 wrote:
so each user has it own space of tables - schema ?yes, but let's clarify a bit ....
The "schema" is the collection of all objects owned by a particular user. So if user SCOTT creates two tables, EMP and DEPT, and a view EMP_RPT, and a procedure GET_MY_EMP, those objects (tables, views, procedures) collectively make up the SCOTT schema.
Those objects will be physically stored in a tablespace.
A tablespace is a named collection of data files. So tablespace USERS will be made up of one or more data files. A specific datafile can belong to one and only one tablespace. If a tablespace has more than one data file, oracle will manage those files as a collection invisible to the application - much like the OS or disk subsystem handles striping across multiple physical disks.
A specific object in the SCOTT schema can exist in only one tablespace, but not all objects of the schema have to be in the same tablespace. Likewise a tablespace can contain objects from multiple schemas.
and can one user to access tables of other users?As others have said - FRED can access tables belonging to SCOTT as long has SCOTT has granted that access to FRED.

What is the difference between scheduling agreement and delivery schedule

Hi
1. Can anyone explain me the difference between scheduling agreement output
    and scheduling agreement delivey schedule
    Will the both look same in T.code SP02 when seeing the output for a document.
    Can anyone send me T.codes for above ones in purchasing.
2. when seeing the Detailed statement for rebate agreement,there is item number.
    In which table can we see the item number for rebate agreement

Hi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle

What is the difference between interactive report and alv interactive repor

what is the difference between interactive report and alv interactive report
could u plz explain clearly.

Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1                                      *
REPORT ZKAL_ALV_INTERACTIVE_1                  .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
          KUNNR TYPE KUNNR,
          NAME1 TYPE NAME1,
          ORT01 TYPE ORT01,
        END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
          VBELN TYPE VBELN,
          ERNAM TYPE ERNAM,
          ERDAT TYPE ERDAT,
          NETWR TYPE NETWR,
          WAERK TYPE WAERK,
         END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
         NAME1
         ORT01 FROM KNA1 INTO TABLE T_KNA1
         WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'BIKE'
   I_GRID_TITLE                      = 'CUSTOMER DETAILS'
   IT_FIELDCAT                       = T_FCAT
   IT_EVENTS                         = T_EVENTS
TABLES
    T_OUTTAB                          = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT
     I_LOGO                   = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
         ERNAM
         ERDAT
         NETWR
         WAERK
               FROM VBAK
               INTO TABLE T_VBAK
               WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'KALEEM'
   I_GRID_TITLE                      = 'LIST OF ORDERS'
   IT_FIELDCAT                       = T_FCAT1
   IT_EVENTS                         = T_EVENTS1
TABLES
    T_OUTTAB                          = T_VBAK.
ENDFORM.    "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT1
     I_LOGO                   = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM.    "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
    READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem.

Difference between EDN-DB and EDN-JMS implementation

Experts,
Looking for a difference between EDN-DB and EDN-JMS implementation. We have EDN implementation going on, where multiple source systems will be publishing business events. Events can be published using SOA Suite or JMS Bridge from AQ and MQ. In this scenario which implementation approach is suited better ?

Oracle Apps Adapter can be used for many other products other than E-Business Suite (JD Edwards E1, OTM, and others). The apps adapter was mainly used in ERP systems and was strong when you needed have added functionality other than just polling a db for a status / calling a stored procedure... It could connect out to other business services, xml gateways and so-on.
From a technical aspect / development perspective I always thought of that the Oracle Apps Adapter simplifies the development but, may is not flexible. The App Adapter's strength is the services that are difficult to integrate with (business services, xml gateway). If you need to hook in to these types of services, use the APPS adapter. (Again like it is named the "Apps Adapter" its for interacting w/ other applications to enable real-time processing / functionality.
That being said the dbAdapter can be very powerful but, like it is named is database focused (to poll some table to know when to kick off other logic and enable real-time functionality through database interaction.
Looking at the Oracle 12C Roadmap I had heard that there is more planned for the Oracle Apps Adapter moving forward, especially as Anuj said in the "Financial Apps" side of the isle at Oracle. Who knows what is real and what isn't though =]
Hope this helps!
-Luke

Difference between interface pool and class pool

Hi,
Can any body tell me the difference between Interface pool and Class pool.
thank you in advance.
regards

Hi,
Class and Interface Pools
This section discusses the structure and special features of class and interface pools for global classes.
Global Classes and Interfaces
Classes and interfaces are object types. You can define them either globally in the Repository or locally in an ABAP program. If you define classes and interfaces globally, special ABAP programs called class pools or interface pools of type K or J serve as containers for the respective classes and interfaces. Each class or interface pool contains the definition of a single class or interface. The programs are automatically generated by the Class Builder when you create a class or interface.
A class pool is comparable to a module pool or function group. It contains both declarative and executable ABAP statements, but cannot be started on its own. The runtime system can create runtime instances (objects) through a request using the CREATE OBJECT statement. These objects execute the statements of the class pool.
Interface pools do not contain any executable statements. Instead, they are used as containers for interface definitions. When you implement an interface in a class, the interface definition is implicitly included in the class definition.
Structure of a Class Pool
Class pools are structured as follows:
Class pools contain a definition part for type declarations, and the declaration and implementation parts of the class.
Differences From Other ABAP Programs
Class pools are different from other ABAP programs for the following reasons:
·        ABAP programs such as executable programs, module pools, or function modules, usually have a declaration part in which the global data for the program is defined. This data is visible in all of the processing blocks in the program. Class pools, on the other hand, have a definition part in which you can define data and object types, but no data objects or field symbols. The types that you define in a class pool are only visible in the implementation part of the global class.
·        The only processing blocks that you can use are the declaration part and implementation part of the global class. The implementation part may only implement the methods declared in the global class. You cannot use any of the other ABAP processing blocks (dialog modules, event blocks, subroutines, function modules).
·        The processing blocks of class pools are not controlled by the ABAP runtime environment. No events occur, and you cannot call any dialog modules or procedures. Class pools serve exclusively for class programming. You can only access the data and functions of a class using its interface.
·        Since events and dialog modules are not permitted in classes, you cannot process screens in classes. You cannot program lists and selection screens in classes, since they cannot react to the appropriate events. It is intended to make screens available in classes. Instead of dialog modules, it will be possible to call methods of the class from the screen flow logic.
Local Classes in Class Pools
The classes and interfaces that you define in the definition part of a class pool are not visible externally. Within the class pool, they have a similar function to local classes and interfaces in other ABAP programs. Local classes can only be instantiated in the methods of the global class. Since subroutines are not allowed in class pools, local classes are the only possible modularization unit in global classes. Local classes have roughly the same function for global classes as subroutines in function groups, but with the significant exception that they are not visible externally
Reward points if useful....
Regards
AK

Difference between BW3.5 and BW7

Hi,
I am very new to BW7, can u tell me what is the difference between BW3.5 and BW7.
My client wants BW7, I dont have any knowledge on Bw7 with out training can I implement the project because I have bw3.5 knowledge ,
Can u forward any documentation regarding this ( bw7 ) ,
Can you send me the step by step procedure of bw 7 .
Thank u
Jashaik
My Id : [email protected]

Hi Shaik,
Check this for what's new in NW2004s BI:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
Also check these links for BI 7.0:
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/9280fb2d-0a01-0010-0f80-f33ab5c1606d [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/93eaff2d-0a01-0010-d7b4-84ac0438dacc [original link is broken]
Frequently Asked Questions in SAP NW 7.0 - Enterprise Data Warehousing, Reporting, Query & Analysis and Business Planning [original link is broken]
check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
Also see:
SAP Service Marketplace at
http://help.sap.com/NW2004s
http://service.sap.com/bi
BI in SAP NetWeaver 2004s -> BI Capabilities folder
for documents on the new features and also some presentations
Bye
Dinesh

Can anybody explain me difference between test cases and test data

Hi All,
Can anybody explain me difference between test cases and test data.
Testing procedure for FS.
Thanks & Regards,
Smitha

Hi,
Test case is a procedure how to do the testing of particular functionality and it consists the data that to be given for testing a particular requirement of the given Functional Spec and it also consists the result whether the desired functionality is fullfilling or not.
Regards
Pratap

EXACT DIFFERENCE BETWEEN FULL LOAD AND REPAIRFULL LOAD?

HI Champ,
Can anyone explain me the exact difference between full load and Repairfull load?Give e some senario where we can go for this?Please.....
10zin

Hi,
Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
This is normally done we when we lose some data or there is data mismatch between source system and BW.
Check the OSS Note 739863 'Repairing data in BW' for all the details
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets."
Refer.
Repair full request
Re: Repair full request
Steps to perform repair full request
full repair request
repair full request
Re: Repair Full Request
Thanks,
JituK

Diff, bet general SD pricing procedures and Internet Pricing procedure

Hi,
Will any one give clear picture about the diff, between SAP SD pricing procedure and Internet Pricing Procedure? and what are the areas it differs?. If you mail me any URL / Doc regarding Internet Pricing Procedure Configuration that will be of great help.
[email protected]

I hope by internet pricing procedure you mean pricing procedure used in Internet Sales / CRM Online.
Basically, there are no differences. Structure is same. The way pricing procedure is defined & used is same. The only different I would say is, the way you write code for formula & requirements. Usability-wise, they both are same.
Hope it helps.
Regards,
Kaushal

Difference between "print" statements and "select" statements , TSQL

What is the difference between "print" statements and "select" statements when it omces to debugging and watching varibles in the stored procs .....

SELECT statement is part of the ANSI SQL language.
PRINT command is not part of the SQL language, it is used for debugging in T-SQL.
BOL:" Returns a user-defined message to the client.
A message string can be up to 8,000 characters long if it is a non-Unicode string, and 4,000 characters long if it is a Unicode string. Longer strings are truncated. The
varchar(max) and nvarchar(max) data types are truncated to data types that are no larger than
varchar(8000) and nvarchar(4000).
RAISERROR can also be used to return messages. RAISERROR has these advantages over PRINT:
RAISERROR supports substituting arguments into an error message string using a mechanism modeled on the printf function of the C language standard library.
RAISERROR can specify a unique error number, a severity, and a state code in addition to the text message.
RAISERROR can be used to return user-defined messages created using the sp_addmessage system stored procedure."
LINK: http://technet.microsoft.com/en-us/library/ms176047.aspx
The SSMS (client software) returns SELECT output to Results and PRINT output to Messages.
The SQLCMD -o (output file) option captures all outputs into one file mixed.
Kalman Toth Database & OLAP Architect
T-SQL Scripts at sqlusa.com
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Difference between Sampling Procedure and Sample-drawing procedure

Similar Messages

Maybe you are looking for