Difference between space shown on iPhone and in iTunes

My iPhone 6 plus showed that I was low on space. Only 513MB. When I plugged it into iTunes, the bar across the bottom shows that I have over 2GB free. I have restarted my phone, iTunes and the computer as well as sync'd a few times but the numbers are not eve close. Does anyone know why that would be?

Removing an App on a specific iPhone/iPad in iTunes or on the device itself does the same thing. The app will remain in your iTunes library.
If you want to delete an app forever from iTunes...
1. Select 'show sidebar' in the iTunes 'View' menu
2. Select Apps in the sidebar
3. Select "All' in the top of the Apps pane
4. Navigate to the App you want to delete (you can also use the search field at the upper right of the window)
5. Select the App and press 'Delete' key
Alternatively...
To quickly get to the App(s) you want to delete:
1. From anywhere in iTunes (no navigating required) Press Command-F (ctrl-f on PC) to enter the search box.
2. Select the App from the dropdown results
3. Press 'Delete'

Similar Messages

HT1384 Is there a difference between an IPod USB cord and an IPhone USB cord?

Is there a difference between an IPod USB cord and an IPhone USB cord?

Guy would this be of any help:
To start up your computer in Apple Hardware Test:
Press the power button to turn on your computer.
Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
Note: Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT. An Internet-enabled connection via Ethernet or Wi-Fi is required to use this feature.
It takes a minute or so for Apple Hardware Test to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen:
When the process is complete, select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language and then press the Return key.
The Apple Hardware Test console appears. You can choose which sort of test or tests to perform:
To perform all of the basic tests, click the Test button or press the "T" key or the Return key.
To perform a more thorough diagnostic test, select the "Perform extended testing" checkbox under the Test button before you click the Test button.
Your test results will appear in the window in the bottom-right of the console.
To exit AHT, click Restart or Shut Down at the bottom of the window.

What is the difference between APPLE TV models 30850MD199LLA and 300024854433?

What is the difference between APPLE TV models 30850MD199LLA and 300024854433?

MD199 is as shown below. The other number is not an Apple model number.
OVERVIEW
Introduced     March 2012 (A1427) March 2013 (A1469)
Discontinued     --
Model Identifier     AppleTV3,1 (A1427) or AppleTV3,2 (A1469)
Model Number     A1427 or A1469
EMC     2528
Order Number     MD199LL/A

What is the difference between apple care protection plan and apple care

What is the difference between apple care protection plan and apple care +

apple care protection plan
That is the extended warranty (total of 3 years including the standard warranty for the first year) for any Mac computer.
apple care +
That is the extended warranty (total of 2 years including the standard warranty for the first year) for any iDevice (iPad, iPhone, etc).
For either, the standard warranty is usually referred to as hardware warranty (not Applecare); see an example for the warranty for an iMac:
http://www.apple.com/legal/warranty/products/embedded-mac-warranty-us.html
whereas the extended Applecare is referred to as that:
http://www.apple.com/legal/sales-support/

What is the difference between version 4.7 EE and ECC 6.0 in SD module.

Hi SAP Gurus,
what are the features in 4.7 EE version in general.
what are the features in ECC 6.0 version in general.
then give me the exact difference between version 4.7 EE and ECC 6.0 in SD module.
if u give the information, then u will get the rewards.
Regards,
somu.

Hi Somu,
These are additional enhancements avialble in ECC6.0 other than that remaining same as 4.7E
1.E-Commerce:- SAP ERP provides powerful e-commerce capabilities that can be expanded in an easy, cost-effective manner in line with business growth. Organizations can run a complete sales process on the Internet, and provide business-to-business (B2B) and business-to-consumer (B2C) customers with personalized and interactive online self-services.
2.Mobile Sales for Handhelds:-SAP ERP enables sales professionals to access front- and back-office business processes and to manage critical sales activities in the field using standard PDAs or other handheld devices (including those with bar code scanners). In this area, SAP ERP provides the following functions:- Customer managementWith SAP ERP, sales professionals may enter, view, and modify detailed customer information, and view sales order history for each customer.- Sales order managementSAP ERP enables sales staff to take sales orders via bar code scanners; search, create, and modify sales orders; and list or sort sales order partners.- Material managementSupport for material management for mobile sales enables staff to view material lists or details for a specific material, search material, and display customer-specific prices.
3.Resource-Related Down Payments and Billing:-- Supports creation of down-payment requests analogous to the functions offered by resource-related billing- Enables organizations to bill the requesting company code for services provided via a resource-related billing document.
4.SAP Beverage Functions Available for the Consumer Products Industry:- As of SAP ERP Central Component (SAP ECC) 5.00, the following functions from the SAP beverage industry solution are available for the consumer products industry:* SAP ECC 5.00, consumer products (EA-CP 500)- Material sorting- Extra charge- Empties management- Part load lift orders- Pendulum list indirect sales- Sales returns- Excise duty* SAP ECC 5.00, supply chain management extension (EA-SCM 500)- Direct store delivery back-end- Master data- Visit control- Transportation planning (including loading units, aggregation categories)- Vehicle space optimization- Output control (including valuated delivery note)- Route accounting (including tour data entry, cash payer, route settlement)* SAP ECC 5.00, industry-specific sales enhancements (EA-ISSE 500)- Extended rebate processing.
5.Credit Management:-Integrating sales and distribution (SD) credit management with SAP Credit Management application:With SAP ERP 6.0 application, you can also use SAP Credit Management in SAP Financial Supply Chain Management set of applications (FIN-FSCM-CR) to perform all credit checks and commitment updates for all areas of sales (SD-BF-CM). In SAP Credit Management, you can update the data from multiple systems. This enables you to execute credit checks with consistent data in distributed systems, too. Furthermore, you can connect to external credit information providers by extensible markup language (XML) interfaces. Alternatively, you can continue to use SD Credit Management (SD-BF-CM).
6.E-Commerce: Catalog Management :-As of SAP ERP 6.0 application, you must carry out product catalog replication from your ERP solution to the Text Retrieval and Information Extraction (TREX) server for use in the Web shop, using the report ISA_CATALOG_REPLICATION.
7.E-Commerce: Quotation and Order Management:- Order creation with reference to a contract that has been displayed* Lock of sales documents to avoid concurrent access during the order change process* Display of bills of material in the shopping basket* Free goods processing* Processing of grid products for the SAP Apparel and Footwear application* One-step business order processing* Selection of multiple transaction types in the shopping basket* Credit card support in business-to-business (B2B) Web shop* Material number format conversion* Maintenance of delivery priority in the shopping basket (B2B)* Document search for all documents across all sales areas* Interprocess communication-characteristic value display in basket and order confirmation
8.E-Commerce: Selling Over eBay:-Creation and management of product listings on eBay leverages the e-commerce order management and fulfillment capabilities of the SAP ERP application by easily tying existing tax, pricing, shipping, and payment configurations to post-auction processing. Enhancements in 2005: * You can use the business-to-consumer (B2C) checkout instead of the eBay checkout. With the B2C checkout, you can maximize cross-selling and up-selling opportunities by leveraging B2C functionality, determine tax and shipping using the elaborate methodologies available through condition techniques in SAP ERP 6.0. * E-mail notification scenario: winner notification to keep the auction winner updated with the status of the auction and of his or her order * Monitoring through features such as single-activity trace (SAT), heartbeat, and logging * Creation and publishing of multiple-item auctions and manual retraction of winners
9.E-Commerce: User Management:-- Web-based user management for business-to-business internet users - Assignment of authorization roles to users in web-based user management - Automatic migration of SU05 to SU01 internet users
10.Enterprise Services in Sales Order Management:-Please check in the Enterprise Services Workplace site which enterprise services are available for sales order management on the SAP Developer Network site (www.sdn.sap.com).
11.Internet Pricing and Configurator (IPC):-The IPC is enhanced and integrated to allow configuration within the sales documents of the SAP ERP application reusing existing model data while leveraging its improved functionality and advanced user interface within SAP ERP.
12.Price Catalog (PRICAT): Inbound Processing (Retail):-Inbound message processing of PRICAT essages:As of SAP ERP Central Component enterprise extension retail 6.0 (EA-RET 600) component, you can create and change article data automatically, or in an interface for mass data handling. The system takes both single and generic articles and bills of material and prices into account.
13.Rebate Condition Records Using Scales:-As of SAP ERP 6.0 application, you can set up rebate agreements so that the scale base value and the rebate scale level is derived from the total sales volume of multiple condition records. You do this by grouping condition records in the rebate agreement.
14.SAP Role: Internal Sales Representative:-SAP role internal sales representativeThis role delivers all the functions to fulfill the requirements of an internal sales representative. This includes tasks such as answering phone calls from customers and prospective customers, processing incoming inquiries and sales orders, and preparing quotations and sales contracts.Target groupThe responsibilities of an internal sales representative (or customer service representative) include the following:- Answering phone calls from customers and prospective customers- Answering product, price, and order status related questions- Processing incoming inquiries and sales orders- Preparing quotations and sales contracts- Taking sales orders and ensuring successful order processing for example, taking care of the completeness of sales documents, releasing delivery-blocked orders, and so on - Support for the outside sales force for example, checking on quotations, updating customer master data, and so on- Preparing reports and sales analyses for the sales manager and the sales teamWork overview This work center gives you an overview of your daily work and gives you easy access to your most important tasks. Sales documents This work center allows you to work on all your sales documents. You can create and maintain inquiries, quotations, sales orders, sales contracts, scheduling agreements, and billing documents. Order fulfillment This work center allows you to monitor order fulfillment. You can display deliveries, backorders, and shipments, and can check product availability.Master data This work center enables you to work on all your master data. You can create and maintain business partners, customer agreements, prices and conditions, and products.
I hope it will help you
Regards,
Murali.

Difference between SAP-CRM 2007 UI and previous version UI.

hi,
anyone knows the differences difference between SAP-CRM 2007 UI and previous version UI.
anykind of links or files are helpful.
regards.
raman.

Hi,
actually quite a late response and I think all the rather technically focuses comments have already been given, incl. the link to a really good slide deck, that explains all the technical architecture details on what exactly we did.
From an end user perspective some other statements on what we did:
(1) From an information architecture and visualization perspective we acted based on feedback from our customers in the last years, which led to some restructuring of the screen, e.g. moving the navigation bar from the top area of the screen (horizontal) to the left hand side --> sounds simple but users tend to have problem seeing thing at the top of the screen. We also decided to arrange the information for e.g. an account or an opportunity not in a tab oriented format. Again usability tests in CRM had shown that users often find it hard to see and understand that tabs contain additional information. We now show the details in assignment blocks below the header information in a scrollable format. Vertical scrolling is a behavior of a screen that most users know from their internet experience. Those are just two exampels of what we did in this area
(2) We also have put a large focus on well known web behaviors, like drag & drop and personalization in general, knowing that on the one hand side, no matter what standard UI we deliver, users tend to adapt it exactly based on their needs and wishes. So you will find really easy to understand personalization options everywhere in the new CRM Web Client UI. To achieve this we used lots of web 2.0 techologies that enable especially these easy interactive capabilitites.
(3) Finally, and this relates directly to the arguments mentioned in (2) we focused as well on really easy UI configuration. Again, in every customer project user interface changes are made, to adapt the SAP default to the customers needs. here we invested a lot to make the 60-80% most common UI changes done in projects as easy as possible, that even non-technical people can generally do it (like Power users).
Hope this clarifies some arguments what from the users point of view has been done and what the advantages are.
When you follow the same link as mentioned by Nadine above, you can also find a presentation UI Concept, which explains all the details rather from a users perspective.
Best regards and enjoy the new UI ..and every feedback is very much welcome, only with your feedback we can improve the solution even more.
Ingo

Difference between sm$ts_avail, sm$ts_free and sm$ts_used

Hi,
Please let me know about difference between sm$ts_avail, sm$ts_free and sm$ts_used?
As far as i know, sm$ts_free shows same free space as the dba_free_space.
But what about sm$ts_avail and sm$ts_used?
Thanks.

Views you are talking about are now almost paleolithic dictionary structures of oracle rdbms, still present in the newer releases probably only due to
the some sort of internal compatibility and/or dependencies that are very likely too complicated to be removed and left out 'just like that' from the future releases.
Werner is absolutely right, but it seems you forgot to mention those few relevant and often very useful informations that are here so often requested abd missed by the OP...maybe you were under the impressions of the '$' objects.
Those objects you asking about are views that were originally installed and created with the [Server Manager|http://download.oracle.com/docs/cd/A57673_01/DOC/dcommon/oin/indexj.htm] installation.
I guess they are still somehow related to now-days similar system management tools like for example Oracle enterprise manager or Grid control.
Differences can be observed in several ways :
One would be:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
SQL>
SQL> SELECT dbms_metadata.get_ddl('VIEW','SM$TS_AVAIL') from dual;
DBMS_METADATA.GET_DDL('VIEW','SM$TS_AVAIL')
CREATE OR REPLACE FORCE VIEW "SYS"."SM$TS_AVAIL" ("TABLESPACE_NAME", "BYTES")
AS
select tablespace_name, sum(bytes) bytes from dba_data_files
    group by tablespace_name
SQL> SELECT dbms_metadata.get_ddl('VIEW','SM$TS_USED') from dual;
DBMS_METADATA.GET_DDL('VIEW','SM$TS_USED')
CREATE OR REPLACE FORCE VIEW "SYS"."SM$TS_USED" ("TABLESPACE_NAME", "BYTES") A
S
select tablespace_name, sum(bytes) bytes from dba_segments
    group by tablespace_name
SQL>

What is the difference between "Sort By", "Arrange By", and "Clean Up By"?

What is the difference between "Sort By", "Arrange By", and "Clean Up By"? They are different from SL.

A MAC address is a unique identification consisting of letters and numbers in a form that looks like this:
xx:xx:xx:xx:xx:xx
Every network device has a MAC address, which can be found on a label on the bottom or back of the device. Apple calls this the Ethernet ID.
A DHCP Client ID is an optional name that you can assign to a device. For example, on your Mac....
Open System Preferences (gear icon on the dock)
Open Network
Click on Ethernet
Click Advanced at the lower right
You may be able to edit the DHCP Client ID here....for example.....you could enter MJ500's MacBook in the space provided. That would be the Client ID of your Mac.

What is the difference between a tablespace, a segment and an extent ?

What is the difference between a tablespace, a segment and an extent ? Please explain in layman terms since I'm a total newbie to Oracle.
Regards
Gony

Hi,
These are logical structure of database
1. Tablespace : A database is divided into logical storage units called tablespaces, which group related logical structures together. For example, tablespaces commonly group together all application objects to simplify some administrative operations.
2.Segments
Above extents, the level of logical database storage is a segment. A segment is a set of extents allocated for a certain logical structure. The following table describes the different types of segments.
Segment Description
Data segment
Each nonclustered table has a data segment. All table data is stored in the extents of the data segment.
For a partitioned table, each partition has a data segment.
Each cluster has a data segment. The data of every table in the cluster is stored in the cluster's data segment.
Index segment
Each index has an index segment that stores all of its data.
For a partitioned index, each partition has an index segment.
Temporary segment
Temporary segments are created by Oracle when a SQL statement needs a temporary work area to complete execution. When the statement finishes execution, the extents in the temporary segment are returned to the system for future use.
Rollback segment
If you are operating in automatic undo management mode, then the database server manages undo space using tablespaces. Oracle Corporation recommends that you use "Automatic Undo Management" management.
3. Extents
The next level of logical database space is an extent. An extent is a specific number of contiguous data blocks, obtained in a single allocation, used to store a specific type of information.

What is the difference between On My Mac calendar and icloud calendar?

What is the difference between On My Mac calendars and icloud calendar. I would like just one system to be on both my iphone and MacBook.

Hi,
On My Mac calendars are local to the machine. iCaloud calendars are synced to Apple's iCloud servers.
Best wishes
John M

Is there is any difference between iPhone4 made for Ukraine and for India?

I would like to know about the hardware / software difference between iPhone4 made for Ukraine and for India.
I purchased my iPhone4 in Ukraine and now I'm in India, and here due to restart problem I visit to a local delear/shopkeeper and he replaced some parts of my device with damaged one (crack screen, etc etc) and told me that it is a scrap and need another iPhone4 to replace some parts of it. Now this cell is totally brick, I can't check the EMEI of that device {because now its not booting} and he didn't accept that he replace some/all parts of my device.
So, I want to know that is there is any way to locate these parts?

Anu Tiger wrote:
I told you earlier Sir that this device is made for HongKong market but purchased in Ukraine.
You said:
I would like to know about the hardware / software difference between iPhone4 made for Ukraine and for India.
You also said:
I visit to a local delear/shopkeeper and he replaced some parts of my device
Apple does not sell iPhone parts. You no longer have an iPhone. You have an unsupportable frankenphone.
Go back to whoever opened it up and attempted to repair it. Your phone is not supportable here.

HT4203 what is the difference between turning off "enable 3G" and "cellular data"

what is the difference between turning off "enable 3G" and "cellular data"?

Turning enable 3G off turns 3G network access off. This does not prevent the iPhone from internet access via your carrier's EDGE or GPRS network which is much slower.
Turning Cellular Data off turns cellular data off completely. No internet access via your carrier's cellular network.

Difference between cleared items,open items and all postings (FI).

Hi experts,
Can anybody tell me the difference between cleared items,open items and all postings for an account.
While running corresponding bapis and transaction FAGLL03 (for GL) or FBL1N (for accounts payable) i found that in some cases all postings is less than cleared items or open items for a time period. How could it happen.According to my knowledge all postings should contain cleared items and open items.
Please correct me..
Thanks and Regards
Arjun

Hi Arjun,
For every Billing Documnet created(VBRK/VBRP-VBELN) there will be an accounting document created in BSID/BSAD tables.
OPEN ITEMS means the Billed/Invoice Amounts that are pending from Customers, i.e which we have to receive from Customers.
CLOSED ITEMS means the AMOUNTS received from that customer.
OPEN ITEMS : fetch data from BSID table Only
CLOSED ITEMS : fetch data from BSAD only.
ALL POSTINGS : fetch data from both BSID and BSAD.
Hope this will help.
Regards,
Nitin.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Difference between SY-SUBRC EQ 0 and SY-SUBRC EQ ' 0 '

Dear All,
I am not from abap background.
I have a simple question.
what is the difference between sy-subrc eq 0 and sy-subrc eq '0'
How does it impact a statement like this for example
SELECT /BIC/ZAGENT /BIC/ZBATCH_MO /BIC/ZDOC_NUM /BIC/ZCUSTOMER
           /BIC/ZSTORE /BIC/ZLINE_NUM /BIC/ZMATERIAL /BIC/ZBARCODE
      FROM /BIC/AZO_AMVN100
      INTO CORRESPONDING FIELDS OF TABLE it_aquisition
      WHERE /BIC/ZAGENT EQ SOURCE_FIELDS-/BIC/ZAGENT
      AND /BIC/ZDOC_NUM EQ SOURCE_FIELDS-/BIC/ZDOC_NUM
      AND /BIC/ZOCFLAG = '1'.
    if sy-subrc EQ '0'.
      SELECT SINGLE /BIC/ZDOC_NUM FROM /BIC/AZO_PMVN300
        INTO v_docnum
        WHERE /BIC/ZDOC_NUM EQ SOURCE_FIELDS-/BIC/ZDOC_NUM
        AND /BIC/ZAGENT EQ SOURCE_FIELDS-/BIC/ZAGENT
kindly help me with this.
Pleae do a little more research before posting questions here...even if you are new to ABAP.
Edited by: kishan P on Aug 24, 2010 10:00 AM

Hi,
Please refer [Wiki post|http://wiki.sdn.sap.com/wiki/display/ABAP/Sy-Subrc].
hope it help you,
regards,

Difference between space shown on iPhone and in iTunes

Similar Messages

Maybe you are looking for