Difference between Testing Message in Integarion Engine and Adapter Engine
Hi Experts,
in project, we always test message in runtime workbench>component monitoring>integration engine-->Test Messge
however, i also find that in runtime workbench>component monitoring>adapter engine also exists a Test Message tab.
we don't have access to test messages in this tab, so can anyone tell that what is the difference between testing message in integration engine and adapter engine?
thanks in advance.
The usual flow of messages in scenarios which use adapters at both sender and receiver end is as follows
Sender system -> Adapter Engine -> Integration Engine -> Adapter Engine -> Receiver system
When you use the testing option in IE, then you are basically posting the message directly to the Integration Engine.
When you use the testing option in AE, then you are trying to post the message to the adapter engine, which will then forward the message to the Integration Engine. IN this testing, you are also testing the sender adapter also.
Regards,
Ravi Kanth Talagana
Similar Messages
-
Message ID in Integration Engine and Adapter Engine
Hello,
I have one question related to messages generated in XI.
Is the Message ID specified in the Integration Engine same as the Message ID used during the Message transformation in the Adapter engine?
What is the message flow once the message reaches XI and vice versa?
Regards,
Gajendra.Yes.it is the same ID used .
once the message reaches XI it goes thorough IS which has pipe line steps such as inbound processing receivr determination ,interface determination, techincal routing,mapping,outboundporcessing etc.
for more look at this link
http://help.sap.com/saphelp_nw04/helpdata/en/01/d9d43fb9490c65e10000000a114b1d/frameset.htm -
Business process engine, Integration engine, and Adapter engine
can you differentiate Business process engine(BPE), Integration engine (IE), and Adapter engine
hi,
sure we can
but so can you - just type each of those in google
and you will find:
1. short
2. long
descriptions of all those
in google type also site:sap.com at the end
this will help you much more then our replies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Hi,
In TestStandIf you want to run a TS script that calls VIs on a Runtime engine only system you have to use the Deploy TestStand utility to do that. Since a Runtime Engine only system does not have vi.lib you must search all the .seq for VI calls and then traverse all the SubVis to find all the calls to VIs in vi.lib. The Deploy TestStand does that for you. It moves all the VIs and SubVIs to a SupportVI directory and mass compiles them. Once all VIs are within the same directory the runtime engine can find them.
Note: This is a very nasty poorly written tool. I had a deploy that would take about 6 hours to complete. I wrote my own that takes about 4 minutes to complete. -
What's the difference between deleted messages and trash?
what's the difference between deleted messages and trash?
A Time Capsule is hardware. It's basically an Apple AirPort Extreme wireless router with a built-in hard drive. For more info on this product:
http://www.apple.com/timecapsule/
Time Machine is a software application that allows your Mac to backup its data automatically to the hard drive on the Time Capsule. For more info on this software, which is included with the Leopard, Snow Leopard and Lion operating systems:
http://www.apple.com/findouthow/mac/#timemachinebasics -
Difference between Business message and application message
Hi B2B Gurus,
Can you please explain the difference between Business message and application message?
Regards,
PraveenHi Praveen,
Business message status reports identify business message instance details for a document protocol. These details include the sending and receiving trading partners, the agreement name, the business action, the business message ID, the status, the exchange protocol and document protocol, and message details.
Application Message Reports provide information related to the SOA Composite—the name, version, and so on, if a back-end composite application sent or received the message.
Regards,
Anuj -
Whats the difference between sending messages via socket and MQs?
Whats the difference between sending messages via socket and MQs?
Soph wrote:
Whats the difference between sending messages via socket and MQs?With JMS (and the like) your application uses a socket to connect to a central server called a "*Message Broker*". Over this connection it can send or receive messages.
A Message Broker is somewhat analogous to a database server. Multiple clients connect to it to exchange messages. As with a database a client first establishes a connection, then requests specific facilities like subscriptions.
It creates a strong decoupling between sender and receiver and handles stuff like allowing multiple receivers for the same message, queuing of messages for applications not currently running and so on.
(And don't worry, you can get perfectly good message brokers for free such as openMQ and activeMQ.) -
Can anybody explain me difference between test cases and test data
Hi All,
Can anybody explain me difference between test cases and test data.
Testing procedure for FS.
Thanks & Regards,
SmithaHi,
Test case is a procedure how to do the testing of particular functionality and it consists the data that to be given for testing a particular requirement of the given Functional Spec and it also consists the result whether the desired functionality is fullfilling or not.
Regards
Pratap -
Difference between Average Message Rating and Average Message Rating Gi
Hi folks,
Can anyone tell me, with respect to the user profile for the forum, what's the difference between Average Message Rating and Average Message Rating Gi'ven?
(I did post this in the Off Topic forum, but I guess it is actually On Topic)SSR,
Average Message Rating is the rating that you are given by other people. Average Message Rating Gi'ven is the average rating that you give to others.
Jeremy -
Hi everybody,
Can you tell me what is Difference between Oracle9i 9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers briefly?
In my application I am using Oracle9i 9.2.0.3 JDBC Drivers. But it is not supported when I retrieved Data with junk character from CLOB.because of IO Exception it showing Bigger type length than Maximum
if i used Oracle9i 9.2.0.4 JDBC Drivers it is working properly.
I am using WAS 4.0.3 , JDK1.3 and Oracle 9.0.
Shall I use Oracle9i 9.2.0.4 in my application and I want to know it will create any new problem in my application or not ?
please Reply me ASAP.
i am waiting for your reply
thanks a lot
bye
Message was edited by:
paulusazapakcomCan you tell me what is Difference between Oracle9i
9.2.0.3 and Oracle9i 9.2.0.4 JDBC Drivers briefly?Search the Oracle site. That should tell if there are any differences at all. I would assume that there would be some bug fixes.
please Reply me ASAP.
i am waiting for your replySuch lines are better avoided. -
Differences between the "Adobe Acrobat Versions 7 and 9"
Dear Adobe Support Team,
I need to know the differences between the "Adobe Acrobat Versions 7 and 9". I have worked with Acrobat 7 and have used the same script after installing Acrobat 9 for Automation Testing with QTP for validating pdf. The object "AcroExch.AVDoc" is not getting identified as object while working in QTP in the system/machine which has Acrobat 9 installed, whereas it works well in the machine which has Acrobat 7 installed . So it will be better if two things are known as per my understanding, ie.,
it must have compatibility issue (i need the difference between "Adobe Acrobat versions 7 & 9" to assure this) or
installation issue( which can be confirmed if the former question is answered).
So i kindly request you to help me out for this scenario.
Kind Regards,
Vikraman.GCountless new features were introduced between Acrobat 7 and 9, are you really expecting us to type out a full list from memory?
If you are having specific issues with the Acrobat SDK, first refer to the Acrobat SDK for the higher version. If there remains an issue I suggest posting about the specific problem in the Acrobat SDK forum, rather than asking for an encylopedia of all possible information...
Note that Adobe do not support multiple installations of Acrobat on the same machine, so you can expect development issues if you do this. -
Difference between Req with insufficient lead time and lead time const
Hi ,
1) Can anyone explain the difference between Requirement with insufficient lead time and Requirement lead time constraint exception messages. Both seems to be similar for me with the compressed time.Also at what situations these exceptions are generated.
2) what is minimum lead time required ,actual lead time and its calculation.
Thanks...Check out
http://help.sap.com/saphelp_scm50/helpdata/en/99/ed3a981d0f11d5b3fc0050dadf0791/content.htm
particularly the section "Which functions of the operations relevant to scheduling are supported?"
It will give you a flavour of what can lead to difference in planning. -
Differences between Java Card 2.1.1 and Java Card 2.2
Hi guys, how are you?
My name is Érica and I’m taking Electric Engineering and I love mobile communication.
I’m reading a PDF about SIM cards for cellular networks and I have a doubt that is “killing” me!
What is the most relevant differences between Java Card 2.1.1 and Java Card 2.2?
Could you please help me?
Best regards.
Thanks in advance.
Érica Borsato de Souza Lima – Rio de Janeiro/Brazil2.2.x API will be more complete than 2.1.x, just compare the javadocs and specs.
-
Difference between using app server connection pooling and using the driver
Hi all,
How to get connection pooling with out application server and tomcat also?
What is the difference between using app server connection pooling and using the driver supported connection pooling?
Regards,
Muralimaybe the performance of App server pool is better than the JDBC pool,
for you don't know wether the implementation of the JDBC interface is good or bad. -
What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/
hi gurus
What the difference between Valuate GL Account Open Items and Valuate G/L Account Balances?
We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L Account Balances there is NO reversal posting even though we hv entered the reversal posting date and Period.
Pls advise which one we should perform?Valuate GL Account Open Items are for open item managed accounts including vendor/customer accounts. The valuation is performed for each (open) line items on key date specified.
"Valuate GL Balance" is for account NOT managed on Open Item basis but managed in foreign currency. The period balance of key date in foreign currency is valuated. Reversal document can be created by selecting 'Reverse postings' in "Postings" tab.
Kyoko
Maybe you are looking for
-
I believe Creative MP3 Players are the best! ... But i have a problem he
Hi everybody!! I wish anyone can help me out here. Previously, there was someone else who has this problem with exactly the product which i have. I have this <EM>MuVo Slim</EM> which was bought nearly a year ago. A few months back, my MuVo Slim acted
-
How do I make final cut pro 10.0.9 work with os x yosemite
Was slow to upgrade desktop to Yosemite. Now find that Final Cut Pro version 10.0.9 will now open or work. I've seen several posts - and have attempted those solutions but before I can get to it, the program automatically shuts down. Any suggestion
-
DECISION OF DISPLAYING SPECIFIC SCREEN ACCORDING TO SUBTYPE IN AN INFOTYPE
HELLO EXPERTS AGAIN. I'VE MADE AN 9000 INFOTYPE AND I WANT TO DO THESE: WHEN I CHOOSE SUBTYPE '01' I WANT TO HAVE SCREEN 2000 DISPLAYED WHEN I CHOOSE SUBTYPE '02' I WANT TO HAVE SCREEN 2001 DISPLAYED E.T.C. HOW CAN I USE FEATURE (PE03) TO MAKE THOSE
-
Screen orientation locked despite correct settings in control panel and side switch
Screen orientation locked despite correct settings in control panel and side switch
-
If I cut and paste a word doc in gmail or aol it will not appear when sent to my aol accountt
For the last few days when I send or receive an AOL email that was pasted from Word no text appears in the email. Using Firefox 20. If I send a email pasted from Word from my Gmail to my AOL no text appears. If I send and receive using Gmail, there i