Difference between this month amount and last month amount.
Hi experts,
in report i am showing amount in one coloumn for one year and month wise. in another coloumn i need to show the difference between present month amount and last month.amount for the total months..how to done this..
regards...roi
Hi,
You may do this using cell definition.
If number of months and format is finite then you may do this creating seperate RKF/Selction for each month and then use the same in required CKF/Formulas for deducting. You may display the CKF/Formulas in report for your requirement and hide the rest.
I hope it will help.
Thanks,
S
Similar Messages
-
What's the difference between new Apple TV and last one
What's the difference between the last Apple TV model and the new one? Do I need to buy the new one or will the sofware update catch me up to the same standard as the new one?
The bottom line is that the new one will output 1080p, this is achieved by an upgraded processor and reportedly additional RAM.
There are no additional features included in the new model that aren't included the older one other than the higher resolution output. -
Hi Friend,
Wish you all Happy New Year 2011.
When I am writing Struts2 Action class, within the Action class(Controller in respect of MVC),
what is the difference between calling a method by methodName() only and calling a method by this.methodName() ? Should I use this.methodName() or only methodName() when within same class?
Below are two fragment of code, please tell me which is better(Both code is running)
editService.savePerson(getPersonBean());
or
editService.savePerson(this.getPersonBean());
is better?
code fragment1>
public class EditAction extends ActionSupport {
......some more code here....
public Person getPersonBean() {
return personBean;
public String execute() throws Exception {
editService.savePerson( getPersonBean() );
return SUCCESS;
code fragment2>
public class EditAction extends ActionSupport {
......some more code here....
public Person getPersonBean() {
return personBean;
public String execute() throws Exception {
editService.savePerson( this.getPersonBean() );
return SUCCESS;
}The "this" keyword refers to the current instance, when inside an instance method (or an instance initializer).
It's not usually required unless there's a chance of confusion (which can't really happen with methods, but can easily happen with variables if you keep similarly named variables in the local scope).
It's all quite basic Java stuff, so you might want to find yourself a tutorial which explains all the ways how "this" works. -
Difference between GET pernr LATE and GET pernr LAST?
Hi all,
does anyone know the difference between GET PERNR LATE and GET PERNR LAST?
Regards
Marthi,
Please refer to this link:
[http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9abd35c111d1829f0000e829fbfe/frameset.htm]
Hope this will Help.
reward if useful.
Sumit Agarwal -
Difference between the subledger amount and the expense amount
Hi everybody
I am using PPAC Cost method to book OPM transactions to subledger, the subledger update process is generating RCA postings related to GL Expense cost components at average cost (Batch Certify subevent). This is resulting in a difference between the subledger amount and the expense amount. It is required to generate RCA postings based on allocated expense amount and not based on the average cost.
Did u face such problem before ? can anybody help me ?
Thank You and Best RegardsHi
Mmd.
The difference between the subledger amount and the expense amount MUST be adjusted using Adjustment form
Navigation: Finanacial-->Cost Management--> Actual Costing-->Adjustment
where u can see the Actual Cost adjustments form and u can adjust the diff.
hope this is cleat to u.
Raj
HYD -
is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't
It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary
-
What'z the difference between the Commercial Invoices and
What'z the difference between the Commercial Invoices and
Invoices/Excise Invoices? Also I understand that we can combine 2~3
invoices and can create one commercial invoice? If it is possible, how
to create the same?
cheers
shalsa007....Hello,
A commercial invoice is a bill for the goods from the seller to the buyer. Commercial invoices are utilized by customs officials to determine the value of the goods in order to assess customs duties and taxes.
In general there is no standard form for a commercial invoice although they tend to contain many of the following features:
seller's contact information
buyer's contact information
consignee's contact information (if it is different from the buyers)
invoice date
a unique invoice number
sales terms (usually in incoterm format)
payment terms
currency of sale
full quantities and description of merchandise (Generally this includes unit price and total price. Product descriptions should be consistent with the buyer's purchase order. Including the Harmonized System commodity codes can be helpful, especially in countries that are WTO members.)
Excise invoice Original for Buyer copy, whether prices are inclusive or exclusive of excise duty.
The invoice in which the Excise duties are included.
As per Indian tax system, Excise duty (16%) is payable by each manufacturing unit on the value of manufactured goods / on the value added. The manufacturing plant is supposed to submit an excise duty report on fortnightly / monthly basis. Various registers (RG1, RG23A, RG23C, PLA) are maintained for that purpose, which record all the transactions including movement of goods, cenvat credit available and cash balance available.
In SAP, we use transaction j1id for configuration and j1iin, j2i7, j1i5, j2i5, j2i6, j1ip for creating, extracting and printing excise invoice.
*Please reward if this helps**
Regards
AK -
Cost difference between PM report MCI8 and IW38 orders cost
Hi Experts!
I have an issue of cost difference between Plant Maintenance total actual cost of orders and Cost analysis report.
Short Text
Cost difference between PM report MCI8 and IW38 orders cost
Long Text
Applied SAP notes 180047 and 112841 for the following error:
Cost is not displaying in MCI8 for every 3 months intervals.
Now this problem has been resolved but got an another error like cost
difference between MCI8 report and IW38 order costs.
Note applied method:-
1). Configured FYV as Z1 with Period update for info structures S61 to
S65, S70, S114 to S116.
2). Regenerate order cost in Tcode OLI5.
3). PMIS: Statistical setup of info structures T.Code u2013 OLPM
For Info Structures which is changed in the configuration SO61-SO65,
SO70, S114-S116.
4). Copy info structures Version &( to Active version 000 T.Code u2013 OLIX,
Select Copy version
For all info Structure SO61-SO65, SO70, S114-S116.
*Steps for Reconstruction*
New another error like cost difference between MCI8 report and IW38
order costs.
Step 1. Transaction- MCI8, Order type - CORR, Period -01.2009 to
12.2009 and execute
Step 2. Drilldown the corrective maintenance order costs into period
wise.
Step 3. Transaction- IW38, Order type Corr, Period -01.2009 to 12.2009,
Currency - EUR and execute
Cost differences: E.g. Example A)
MCI8 IW38
Total costs 8.041,69 5.544,99
of WOs 18 18
So far my view is that, regardless of the selection criteria or the
output layout, predominantly the costs are different.
I would expect that they are equal. And what the right result are,..u2026Iu2019m
not sure.
Regards,
SanthamoorthyHello,
Sometimes this difference comes because of the selection period which we are choosing.
Try to run IW38 once with the help of Basic start and basic finish dates of the order.
And after that with the help of the period with the same dates range.
You will get the difference also.
the reason is that whenever any Posting is done in the previous month PM order the system changes the basic start date and when you select the current period and execute IW38 it shows the whole cost incurred on the order including all previous cost.
But in MCI8 it does not happen because MCI8 is run through LIS structures. And in this report only the current month cost will be shown by the system.
I hope you got the idea about differences.
Regards
Naveen -
Re: DIfference between Schemas, PCRS' FUnctions and Operations
Dear SAPExperts,
Can anybody pls tell me what is difference between Schemas, PCRS' Functions and Operations.
Thanx in advance
Regards
AniruddhaHi Aniruddha
When the payroll driver is executed (for ex: PC00_M40_CALC for INDIA is executed) the schema IN00 (standard schema) is executed and it calls certain functions (functions may use Rules. Rules contain Operation) and also subschemas.
Functions could be of four types
1. Performing some payroll computations (E.g. INEPF function calculates the PF amount of an employee during payroll run)
2. Calling rules (E.g. P0045 function calls a rule INLN to compute the loan details of a personnel number).
3. Getting data from Infotypes (E.g. P0581 will get the data from Infotype-581 for payroll processing).
4. For some decisions. (E.g. IF & ENDIF function is used to execute as per the true and false decisions) etc.
When the PY is executed SAP uses lot of Internal Tables to store data and also provides data to other internal tables.
The read and change access to Internal Tables is enabled using functions that are executed in a personnel calculation schema and using operations that are executed in personnel calculation rules.
The following is just an attempt to provide some info on how Functions are processed during the PY Run. For ex: (functionality of subschema XIN0 and INBD)
1. INITIALIZATION OF PAYROLL: When the Payroll is executed first the subschema XIN0 is called, This subschema comprises the following main steps:
I. Specify program type (payroll or evaluation)
II. Set switch for database updates (YES/NO) all database updates are controlled via this switch (otherwise simulation)
III. Only infotypes from the HR master record which apply to the selected personnel number are read.
IV. All Time Management infotypes are imported.
V. Specify check against control record PA03 (test or live).
2. READ BASIC DATA: Once the Initialization of Payroll is successful, the subschema INBD is called. This subschema reads the Basic data of an employee who is there in the Payroll execution. Basic Data includes, determining Employee Name, Reading Work Center/Basic Pay Data, Setting Financial Year Dates and Allowance Grouping Tables, Reading Previous Employment Tax Details, Reading Housing (HRA/CLA/COA), Reading Exemptions, Reading Income from Other Sources, Reading Section 80 Deductions, Reading Investment Details (Sec 88), Reading Provident Fund Contributions, Reading Other Statutory Deductions, Reading Car and Conveyance, Reading Long Term Reimbursements, Read ID Details. Function GON checks whether all the master data has been imported, no further processing of schema will occur unless certain data is present.
The Subschema INBD calls the following functions in order to read the Basic Data:
ENAME :
Function ENAME reads the last valid name of the employee in the payroll period. The formatting used for the country in question is used when displaying this name.
WPBP
If an employee receives a pay increase within a payroll period, the Basic Pay infotype (0008) is changed and delimited as of a specific date. Two data records exist for one payroll period.
During payroll, the system writes the Basic Pay wage type to the results table with two different indicators. These split indicators are a link to the WPBP table that contains the relevant values. The system takes into consideration both data records for the corresponding partial periods when calculating remuneration.
ININI
P0580
P0581
P0582
P0584
P0585
P0586
P0587
P0588
P0583
P0590
P185I
GON :
Function GON checks whether all the master data has been imported. No further processing of the schema will occur unless certain data is present. Checking procedures vary from country to country. There must always, however, be a work center (P007).
[Def. of Functions, Rules and Operations (copied from Raju's answer)
Schema is a collection of functions
A Rule is a collection of operations.
An operation is a very basic piece of logic that is used, mostly, to manipulate wage types
Best Regards
Reddy -
Difference between on change of and at end of :
Hi Can any one explain me what is the exact difference between on change of and at end of .
I know the basic differences.
But i would like to know in which case we can use the above two statemetns.
Suppose :
Matnr plant sloc movementype date qty
12 001 002 261 12/11/08 10
12 001 002 261 12/11/08 11
12 002 003 261 12/11/08 12
Here i need to add the quantity based up on the material,
If the materials is maintained in different plants then it should give the total for for that particular plant.
Please help me how to build logic to this :
Regards,
Vinay.ok sure i will give it to u.
MATNR PLANT SLOC BWART BUDAT QTY1 QTY2 QTY3 QTY4 QTY5
127874 2501 3025 200906 201 0.000 0.000 0.000 0.000 0.000
QTY6 QTY7 QTY8 QTY9 QTY10 QTY11 QTY12
0.000 0.000 0.000 0.000 0.000 0.364 0.000
127874 2501 3025 200905 201 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 7.000 0.000 0.000
127874 2501 3025 200905 202 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.000 0.000 0.000
127874 2501 3025 200905 261 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 35.000 0.000 0.000
127874 2501 3025 200905 551 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 5.000 0.000 0.000
Here i need to write the logic for that material usage :
This material usage will be caliculated based upon the movement types in that particular month :
The formula is :
AT END OF BUDAT.
FINAL_VALUE_WA-KWMENG12 = ( W_QTY261 - W_QTY262 ) + ( W_QTY201 - W_QTY202 ) + ( W_QTY551 - W_QTY552 ).
CLEAR : W_QTY261,W_QTY262,W_QTY201,W_QTY202,W_QTY551,W_QTY552.
ENDAT.
Here iam writting the logic as at end of the month iam caliculating.
But what my question is if we have same material in different plant and the usage is in the same month
then i think this query is going to fail.
Edited by: vinay raj on Jul 6, 2009 2:02 PM
Edited by: vinay raj on Jul 6, 2009 2:03 PM -
Difference between data selection period and personal seletion period
Hi
Experts ,
ples Expline ,
Difference between data selection period and personal seletion period. to Data screening .Data selection period means
For example if u given any period,
here we are checking whether data is valid in this period.
Personal selection period means
we are checking whether person is valid in a given period.
Example is:
For example if the employee resigned in a company on 15th of month.
He can get the salary only at the end of month it means his data is avilable upto end of month.
But when you consider his status from 16th to end of month
the person is not available.
So when u given date(16th to end of month) in data selection period is showing that person data is avilable.
But when mention that date in person selection period it is showing no person is avilable.
if useful
reward with points............ -
Difference Between Special Purpose Ledger and New General Ledger
Dear All,
Could any boy explain me the difference between Special Purpose Ledger and New General Ledger?
Regards
JSHi
General Ledger Accounting (FI-GL) (New) The central task of G/L accounting is to provide a comprehensive picture of external accounting and accounts. Recording all business transactions (primary postings as well as settlements from internal accounting) in a software system that is fully integrated with all the other operational areas of a company ensures that the accounting data is always complete and accurate. Beyond fulfilling the legal requirements, General Ledger Accounting also fulfills other requirements for modern accounting: - Parallel Accounting General Ledger Accounting allows you to perform parallel accounting by managing several parallel ledgers for different accounting principles. - Integration of Legal and Management Reporting In General Ledger Accounting, you can perform internal management reporting in parallel with legal reporting. For this purpose, the Profit Center Accounting functions are integrated with General Ledger Accounting. Furthermore, you can generate financial statements for any dimension (such as profit center). - Segment Reporting General Ledger Accounting supports the segment reports required by the accounting principles IFRS (International Financial Reporting Standards) and US GAAP (Generally Accepted Accounting Principles). For this purpose, General Ledger Accounting contains the Segment dimension. - Cost of Sales Accounting You can perform cost of sales accounting in General Ledger Accounting. For this purpose, General Ledger Accounting contains the Functional Area dimension. Features General Ledger Accounting comprises the following functions for entering and evaluating posting data: - Choice between group level or company level - Automatic and simultaneous posting of all subledger items in the appropriate general ledger accounts (reconciliation accounts) - Simultaneous updating of the parallel general ledgers and of the cost accounting areas - Real-time evaluation of and reporting on current posting data, in the form of account displays, financial statements with different balance sheet versions, and additional analyses. In this way, General Ledger Accounting automatically serves as a complete record of all business transactions. It is the central and up-to-date component for reporting. Individual transactions can be checked at any time in real time by displaying the original documents, line items, and monthly debits and credits at various levels such as: - Account information - Journals - Totals/transaction figures - Balance sheet/profit and loss evaluations However, SAP still offers to choose between the New GL and the old Classic GL way of accounting. There are certain limitations in the new GL and clients are adopting to the new gl concept.
You also see the nsap note 756146
Regards
Roobal -
What is the difference between periodic asset postings and depreciation pos
Hi,
What is the difference between periodic asset postings and depreciation postings in asset accounting.
Regards, Naresh YadavASKBN or ASKB : Periodic asset posting will update acquisition and depreciation in depreciation area other than area 01 which are maintained as post "APC and depreciation on periodic basis" by using ASKB or ASKBN
Separate set of GL accounts will be used for ASKBN. You can run ASKBN or ASKB as and when you need it and not necessarily nonth end
AFAB : To post a book depreciation at every period and this activity usually every month end which posts depreciation 01 Book Depreciation and other areas maintained as realtime at OADB
Srinivas -
Purchase price difference between SAP R/3 and BWI report
Hi
Purchase price difference between SAP R/3 and BWI report
What is purchase price variance ?, my user is telling that in SAP R/3, purchase price variance 100 and in BWI report it is 200 .
Any other terminologies are there for purchase price variance ?
And any idea wherefrom BWI will take this purchase price variance ?
Thanks In advancePurchase price variance is he difference in price between the amount paid to the supplier and the planned or standard cost of that item
Request you to check your data first in your Cube/ODS, better would be to check in the data container where the data is first loaded.
Also check if this field is getting directly loaded as 1-to-1 mapping. -
Difference between Inventory cube 0IC_C03 and 0CP_IC_C1
Hi Gurus
I'd like to ask what's the difference between this 2 cubes in inventory? 0IC_C03 and 0CP_IC_C1 ? Any help will be much appreciated. Thanks in advance
- KitHi,
Well I am not an expert on Inventory but this is what I know:
0IC_C03 - LO Cockpit cube - Standard Inventory qty and values. This can be used for all purpose on a generic basis. This is not customized for any specific Industry sector. A standard ECC can use this as well as Retail can use this.
0CP_IC_C1 - This is also an Inventory cube containing value and quantities but this is more specifically designed for CP industry sector (Consumer Products). Here the BW transaction keys are different meaning that events/movement types specific to CP industry transactions will generate these transaction keys which gets updated to BW.
Also the cube 0CP_IC_C1 KPIs are average figures on the stock quantities and values (Exception Aggregation: Average Over Calendar Days). Whereas in 0IC_C03 the KPIs (NCKFs) are based on last value (Exception Aggregation: Last for Calendar Days)
Therfore if you are not aiming at Consumer Products Industry specific implementation, I would recommend 0IC_C03 cube.
Maybe you are looking for
-
Performance Manager - Set Analysis
Hi I am getting an error with BO Performance Manager - Set Analysis. I have created few sets (20) by logging in as a user. After that when i try to create new Sets - I am getting an error "0300-0101 Sets Cache Error : Maximum Number of Sets created f
-
Popup is closed when command link is pressed even after validation exceptio
Hi Techies, I am using JDeveloper 11.1.1.4. I have a sample .jspx page which has a table, a command link and a popup. When the user clicks the command link, the popup gets shown. The popup contains af:panelWindow as a direct child. panel window as a
-
How i use Enterprise Services?
Hello @ll experts, i hope that is the right Forum-Category. I don't find any description, how is use Enterprise Services with SAP PI for my IT-Scenario. Actual situation: I import the XI-Content (there is the Service Interface to use for the ES) in t
-
HI experts, I have to design a open hub and the requirement sheet only gives couple of field, which i can relate with DSO on which I am building my Open Hub but for amount, it says amount in two fields as: MTD amount, and YTD amount. But in DSO the f
-
Hi how can I sort my contacts by name?