Difference between Titanium Professional and Champ

Hello,
What are the differences between Titanium Pro and Champ versions? Anything else besides the I/O front panel? Does the panel have a headphone amplifier?

there is a diffrence bro...
What difference?
in titanium
Which Titanium? Both cards are called Titanium (one Pro and another Champ).
In Champion, the card is specially tuned for a gamer.
This does not mean anything unless you provide more information.
Sorry, but you didn't indicate a single informati've difference.

Similar Messages

What's the difference between UPK Professional and UPK standard

Hi
I want to know the difference between UPK Professional and UPK standard.
Thanks!

Hi,
In a nutshell, the primary difference is the use of Knowledge Center.
UPK Std makes use of limited usage tracking and reporting, whereas UPK Pro allows full use of the Knowledge Center and related technologies.
The Reports Management.pdf and User and Content Management.pdf documents highlight specifics as to what is only available in UPK Pro.
You will find these docs as part of the installation media.
Hope this helps.
Regards,
Greig

About the Differences between MyServices Professional and MyServices Consumer

About the Differences between MyServices Professional and MyServices Consumer
MyServices Professional is different from MyServices Consumer in the following ways:
There are Common Tasks links on the home page for Order on Behalf and for Authorizations (if the Authorization portlet is enabled in the user's profile).
Automatically grants the Order on Behalf permission for all people in the Home OU of the MyServices Professional user.
Adds the "Authorizations for Others" view on the Authorizations page. This view allows the MyServices Professional user to view -- but not perform -- all Authorizations for people in their Home OU.
See the attached file for more detail and screenshots of: MyServices Consumer with and without the Order on Behalf link displayed, and Requisition and Authorization list views; MyServices Professional Home page with and without the Authorizations portlet visible, and Requisition and Authorization list views.
Note: RequestCenter 2006 cannot be configured to automatically add users to MyServices Professional on creation of their user record via directory integration. This can be accomplished in RC2007, since roles can be imported from LDAP in that version.

Hi Koji,
One thing to consider is the number of different source types. BO supports SAP and all the relational DBs. There is also the fact that BO provides a single front end to different reporting type which makes the user experience much better. Finally, users ability to build there own reports, without a high level of traiining is one of the big selling points for BO.
Here is a good overview of the combination of the 2 , including some roadmap
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10c3bca6-7dbc-2a10-7aa8-81d2731c7bb1
Hope this helps
Alan

Hi I have the old photo shop elements 10 on my computer and want to update and was wondering what the differences between photoshop, lightroom and photoshop elements are? Also when I upgrade does it have to be with a monthly membership or can I just purch

Hi I have the old photo shop elements 10 on my computer and want to update and was wondering what the differences between photoshop, lightroom and photoshop elements are?
Also when I upgrade does it have to be with a monthly membership or can I just purchase the product out right like you use to be able?

You cannot "update" from what you have to any of the applications you mention. It will have to be a straight purchase or subscription at full price.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve.
Lightroom is all about volume, and very light editing.
The Photoshop Elements forum is at:
https://forums.adobe.com/community/photoshop_elements/content
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I do not know where there is such a comparison table as you seek, but someone else might, or you can google.

List of differences between PSE 40 and PSE30

A lot of users are asking what are the differences between PSE 30 and PSE 40.
This Thread provides information on this subject. First, you will find information copied from the section "New Features" of the useful "Adobe Photoshop Elements 4.0 User Guide". Then later on, you might find additional information on the same subject provided by users of PSE.
--- Start of copy of information in the PSE 4.0 User Guide ----
1 What's new in PSE 4.0
1.1 Editing and selection
1.1.1 Magic Selection Brush tool
Easily and accurately select portions of your photos using this new tool in either Standard Edit and Quick Fix. Simply scribble or place dots on the object you want to select -no need to precisely outline the object- and Adobe Photoshop Elements selects the object for you. You can add to or subtract from the selection by using additional tools in the options bar. (See User Guide "To use the Magic Selection Brush tool" on page 193.)
1.1.2 Magic Extractor.
Easily select an object in a photo and extract it from its background. Just scribble or place dots on
the object you want to extract; then scribble or place dots on the background, and Photoshop Elements separates the object from its background. This tool is perfect for creating composites or scrapbook images. (See User Guide "To use the Magic Extractor" on page 194.)
1.1.3 Skin tone adjustment
Click an area of skin and watch the tonal balance of all colors in the photo improve. If you
want, you can also manually adjust the color by using color sliders. (See User Guide "To adjust the color of skin tone" on page 224.)
1.1.4 Red eye removal
Automatically remove red eye during import, or select one or more files and easily remove red eye
in either the Organizer or the Editor. (See User Guide "To remove red eye" on page 249.)
1.1.5 Defringe
Automatically remove the colored specs or halo around the edges of a selection. (See User Guide "To defringe a Selection" on page 200.)
1.1.6 Straighten tool
Straighten and crop crooked photos by drawing a horizontal or vertical line in the image. Photoshop
Elements aligns the photo to that line. (See User Guide "To straighten an image" on page 243.)
1.1.7 WYSIWYG font menu
What you see is what you get -see what each font looks like from within the font menu. (See
User Guide "To choose a font family and style" on page 332.)
1.2 Sharing and printing
1.2.1 One-click printing (US, Canada, Japan only)
Order prints and professional hardbound photo books directly from Photoshop Elements simply by dragging the items to the Order Prints palette. (See User Guide "To use the Order Prints palette (US, Canada, Japan only)" on page 401.)
1.2.2 Slide shows on TV
If you have Windows¨ XP Media Center 2005 installed, you can view your Photoshop Elements
slide shows on your TV and navigate using your TV remote control. (See User Guide "To output a slide show" on page 354.)
1.3 Tagging and organizing
1.3.1 Face tagging
Select a group of photos and let Photoshop Elements isolate and display all the faces so that you can
quickly tag them. The Find Faces dialog box displays thumbnails of each face until you tag it. (See User Guide "To automatically find faces for tagging" on page 101.)
1.3.2 Search by metadata
Search for a variety of metadata criteria, such as file name, file type, shutter speed, camera
model, date, and tags. You can search on multiple criteria at once. (See User Guide "To find photos by details (metadata)" on page 89.)
1.3.3 PDF support
Manage and tag PDF files in the Organizer. PDF files remain intact as one file that you can tag. Open
the PDF in the Editor to extract individual pages. (See User Guide "To open a PDF file" on page 148.)
--- Continuation in next Post of this Thread ----

--- Continuation from previous Post -----
2 What's changed in PSE 4.0
2.1 Editing and selecting
2.1.1 Crop tool
Freely change image size boundaries while cropping an image. When you're happy with your crop marks,
click the Commit button , which is now conveniently located at the bottom right corner of the crop border. (See User Guide "To crop an image" on page 240.)
2.1.2 Paragraph text
Create paragraph text by dragging a border with the Text tool. The text you enter inside the border
wraps to remain inside the boundaries. (See User Guide "To add text" on page 329.)
2.1.3 Quick Fix
Use the newly enhanced automatic correction options for the most common photo flaws. (See User Guide "To correct color in Quick Fix" on page 207.)
2.1.4 Easier color management
Easily get the color you expect when printing. N ew options and improved embedded
profile support streamline color management. (See User Guide "About color management" on page 236.)
2.1.5 Advanced camera raw
Fine tune exposure and lighting by working with the raw data from your digital camera, and
easily export photos to the universal DNG format. (See User Guide "About camera raw image files" on page 159.)
2.1.6 Artifact reduction
Quickly remove noise caused by shooting in low light or with ISO camera settings by using the
new Remove JPEG Artifacts option in the Noise filter. (See User Guide "Reduce Noise" on page 289.)
2.2 Sharing and printing
2.2.1 Multimedia slide shows
Create feature-rich slide shows with all the new tools and options available in the Slide Show
Editor:
a) Gracefully move from one image to another by adding interesting transitions between each slide. You can choose from over 50 transitions, such as dissolves and doors. (See User Guide "To add and edit transitions" on page 352.)
b) Add text and graphics with the click of a button. (See User Guide "To add text to a slide" on page 348 and "To add clip art graphics to a slide" on page 347.)
c) Make your slide show feel more like a video by panning and zooming your slides. For instance, you can pan from a face on the left side of an image to a face on the right side of the image. (See User Guide "To set pan and zoom" on page 350.)
d) Add background music, make the duration of your slides match the duration of your audio, and narrate your slides all with the click of a button. (See User Guide "To add music to a slide show" on page 347 and "To add narration to a slide" on page 350.)
e) Quickly reorder or edit your slides without leaving the Slide Show Editor. (See User Guide "To reorder slides" on page 346.)
f) Preview anytime by clicking the Preview button, and then output your slide show by burning a DVD (if you have Adobe ' Premiere' Elements installed), sending it in e-mail, sharing it online, or sending it to your TV. (See User Guide "To output a slide show" on page 354.)
2.2.2 Photo mail
Turn plain e-mail into theme-based Photo Mail with enhanced and easier to use captions. (See User Guide "To send a photo using Photo Mail" on page 407.)
2.2.3 Desktop wallpaper
Create original desktop wallpaper using multiple photos. (See User Guide "To use photos as desktop
Wallpaper" on page 367.)
2.2.4 Creations
Create your own cards, calendars, and photo albums, and then print them on your printer, upload them
to the web, or burn them to CD. (See User Guide "About creations" on page 343.)
2.3 Viewing, tagging, and organizing
2.3.1 Faster download
Use the enhanced Photo Downloader to quickly download photos from your digital camera and
mobile phone, even when Photoshop Elements is not running. (See User Guide "To get photos from a digital camera or card reader" on page 62.)
2.3.2 Full Screen and Side By Side View
View your photos in full screen without the clutter of command menus and tools.
(See User Guide "Viewing photos at full screen or side-by-side" on page 76.)
2.3.3 Automatic organization and view options
View your photos as arranged automatically by date, or use the intuitive
Date View or the enhanced Folder Location view. (See User Guide "To sort files in the Photo Browser" on page 71.)
2.3.4 Address book
Import your addresses from Microsoft Outlook address book or vCards. (See User Guide "Using the contact Book" on page 404.)
2.3.5 Captions
Add captions to multiple photos at once. Open and edit audio captions by simply clicking the Audio
icon in thumbnail view in the Photo Browser. (See User Guide "To add captions to files" on page 123 and "To add audio to a photo" on page 124.)
--- End of Information Copied from the Adobe PSE 4.0 User Guide

EXACT DIFFERENCE BETWEEN FULL LOAD AND REPAIRFULL LOAD?

HI Champ,
Can anyone explain me the exact difference between full load and Repairfull load?Give e some senario where we can go for this?Please.....
10zin

Hi,
Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
This is normally done we when we lose some data or there is data mismatch between source system and BW.
Check the OSS Note 739863 'Repairing data in BW' for all the details
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets."
Refer.
Repair full request
Re: Repair full request
Steps to perform repair full request
full repair request
repair full request
Re: Repair Full Request
Thanks,
JituK

X100e RAM Question (difference between PC2-5300 and PC-5300)

Hello,
I am about to upgrade my x100e's empty RAM slot with 2 GB
I already found out here that best RAM for x100e is :"PC2-5300 DDR2 SDRAM 667MHz SO-DIMM-MEMORY"
In my local store they have SO DIMM PC-5300, 2 GB, KINGMAX, DDR2 667 MHz.
So what is difference between PC2-5300 and PC-5300. Can i buy that kingmax pc-5300, is that compatible with my x100e and will it be slower then recomended PC2-5300?
please help
here's my spec.
Athlon MV40(1.6GHz), 1GB RAM, 160GB 5400rpm HD, 11.6in 1366x768 LCD, ATI Radeon HD2200, 802.11bgn wireless, WWAN upgradeable, Bluetooth, 1Gb Ethernet, UltraNav, 3c Li-Ion, WinXP Professional SP3
Solved!
Go to Solution.

It looks like it's a mislabelling by the store... It should be called PC2-5300. AFAIK, if it's DDR2, it should be PC2.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

What's the difference between SharePoint 2013 and Office 365 Team Sites?

Hi there,
What are the differences between SharePoint 2013 and Office 365 Team Sites?
If I would like to develop a professional corporate website with SharePoint technology (because the company allready uses Office 365), do you recommend using SharePoint 2013 (in the cloud) or Office 365 Team Sites? And why?
Thank you very much!

You cannot make SPO Team Sites anonymous-enabled, therefor they're a moot point for a public website.
While slightly out of date, take a look at this:
http://nikpatel.net/2013/01/17/new-sharepoint-2013-wcm-features-are-not-available-in-sharepoint-online-2013/
http://technet.microsoft.com/en-us/library/sharepoint-online-content-service-description.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Difference between Disk:0 and Sup-bootflash

Hello,
Can anyone tell me the difference between Disk:0 and Sup-bootflash. Where does the IOS boot from by default Disk:0 or Sup-bootflash. Can you configure 6509 Switch to boot the IOS from whaterver flash you want Disk:0 or Sup-bootflash?
Any Suggestions.
Thanks,

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Disk:0 (and Disk:1, on the sups that support it) is an accessible CF slot. Sup-bootflash is an internal flash for the SP. With native mode, it's not used. Bootflash is an internal flash used by the RP.
Default booting, usually uses the internal flash, on many of the later native IOSs, this can be overridden by IOS boot statements.
Older sup720s internal bootflash isn't large enough for the later IOS images so you're forced to boot from the external flash. (I work with quite a few of these. Often we keep an older IOS image on the internal bootflash so if someone pulls the CF, we have something to bring a sup720 on, although it may not recognize later line cards.)
Later sup720s have had their internal flash upgraded (to use an CF). The larger internal flash has been renamed to bootflash. BTW, there's also an upgrade kit to replace the older internal RP bootflash with a CF.
Besides the boot commands in an IOS image, the config-register also controls booting. If a sup720 just boots into ROMMOM, you can select different media/IOS images to boot from. Also BTW, there's different versions of the ROMMOM, which have some impact on how a sup720 can boot its IOS.

What is difference between sy-tabix and sy-index.

SAP Seniors,
Can you please let me know what is difference between sy-index and sy-tabix.
I read the SAP help, it is confusing for me. it looks like both are same from help. please help me.
Thank you
Anitha.

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

Difference between sy-tabix and sy-index?

tell me about sy-tabix and sy-index?what is the difference between sy-tabix and sy-index?
Moderator Message: Please search before posting. Read the [Forum Rules Of Engagement |https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] for further details.
Edited by: Suhas Saha on Jun 18, 2011 5:33 PM

HI,
Here is a brief description of difference between SY_TABIX and SY_INDEX and using them with several conditions.
SY-TABIX
Current line of an internal table. SY-TABIX is set by the statements below, but only for index tables. The field is either not set or is set to 0 for hashed tables.
APPEND sets SY-TABIX to the index of the last line of the table, that is, it contains the overall number of entries in the table.
COLLECT sets SY-TABIX to the index of the existing or inserted line in the table. If the table has the type HASHED TABLE, SY-TABIX is set to 0.
LOOP AT sets SY-TABIX to the index of the current line at the beginning of each loop lass. At the end of the loop, SY-TABIX is reset to the value that it had before entering the loop. It is set to 0 if the table has the type HASHED TABLE.
READ TABLE sets SY-TABIX to the index of the table line read. If you use a binary search, and the system does not find a line, SY-TABIX contains the total number of lines, or one more than the total number of lines. SY-INDEX is undefined if a linear search fails to return an entry.
SEARCH <itab> FOR sets SY-TABIX to the index of the table line in which the search string is found.
SY-INDEX
In a DO or WHILE loop, SY-INDEX contains the number of loop passes including the current pass.
Hope this helps.
Thank you,
Pavan.

What is difference between sy-index and sy-tabix and where both are using ?

what is difference between sy-index and sy-tabix and where both are using ?

hi nagaraju
sy-tabix is in Internal table, current line index. So it can only be used while looping at the internal table.
sy-index is in Loops, number of current pass. This you can use in other loop statements also (like do-enddo loop, while-endwhile)
SY-INDEX is a counter for following loops: do...enddo, while..endwhile
SY-TABIX is a counter for LOOP...ENDLOOP, READ TABLE...
Here is an example from which you can understand the difference between sy-tabix and sy-index.
Itab is an internal table with the following data in it.
id Name
198 XYZ
475 ABC
545 PQR.
loop at itab where id > 300.
write :/ itab-id, itab-name , sy-tabix, sy-index.
endloop.
My output will be :
475 ABC 2 1
545 PQR 3 2
Sy-tabix is the index of the record in internal table.
sy-index gives the no of times of loop passes.
So, for the first record in the output (475 ABC), 2 is the index of the record in internal table and as it is first time loop pass occured, sy-index value is 1.
Regards,
navjot
award points

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

The difference between an iphone and an ipod touch?

i want to know if the difference between an iphone and an ipod touch is just that the iphone is like a phone that has internet and is a phone. or what else is it?

The iPhone includes the same as an iPod Touch but also includes a phone, a camera, and a GPS radio.
In addition to having internet access via wi-fi, the iPhone also has internet access via the cellular network, so as long as you have cellular reception with the iPhone, you have access to the internet in addition to having access via an available wi-fi network.

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

Difference between Titanium Professional and Champ

Similar Messages

Maybe you are looking for