Difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.

Hi Experts,
What is the difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.
Thanks

Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually

Similar Messages

Difference between CTS and Transport request

Hi,
i need to know what is the Difference between CTS and Transport request.
kindly expecting replies

CTS (Change & Transport System)
The CTS is a tool that helps you to organize development projects in the ABAP workbench & in customizing and then transport the changes between the SAP Systems & clients in your system landscape.
This docuentation provides you with an overviewof how to manage changes with the CTS & essential information on setting up your system & client lanscape & deciding on a transport strategy. Read & follow the documentation when planning ur development project.
For practical information on working with the Change & Transport system, see Change & transport Organizer & Transport Management System.
Transport Request
Transport Request is a Request number where the developments are given logical storage number which in turn help in transporting the developments to one system / server to other server.
T.Code SE09 & SE10 are used to Transport the request..
Click the Display button.
The list of Workbench ( Workbench request )Customizing ( Customizing request) are shown.
Reward Points if useful.

What is the difference between task and change request?

Hi all
What is the difference between task and change request?
thanks all

Dear Ispit,
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/19/3f5bf8a4b011d285090000e8a57770/content.htm">Request Types and Task Types</a>
<a href="http://help.sap.com/saphelp_sm32/helpdata/en/dd/cc86a571464559a2685a404397065b/content.htm">Change Transactions in Change Request Management</a>
For more information about the SAP Change and Transport System (CTS), visit the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/57/38ddff4eb711d182bf0000e829fbfe/frameset.htm
Transport Request is generated in following scenarios:
1. Customizing Request - When doing or changing some customization.
2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Procedure to Release & Transport Request:
1. In development server, go to T.Code: SE10 & select the check box Modifiable & enter
2. In the next screen, you will see list of transport request created.
Note: Transport request consist of main request along with sub request. These sub request hold the object to be transported.
3. Expand the main request & you will be able to view the sub requests attached to main request.
4. First release the sub requests.
Note: To release the request, select the request ni & click on release request individually (Do not select release all request)
5. Next release main request.
6. Once the request is released sucessfully, imform the basis person to import the request to QA server.
or
If the authority is with you, through T.Code: STMS, select development server --> select request no & release to QA server. Here when it pops up client no, user id & password, maintain it of QA server & release the request to QA server.
Reward points if this is helpful.
Regards,
Naveen.

Difference between Customazation and Change request

Hi All,
Can anyone please describe the difference between Customazation and Change request?
Please provide with 2-3 examples with scenarios.
Edited by: 994943 on 20-Mar-2013 19:14

Hi All,
Can anyone please describe the difference between Customazation and Change request?
Please provide with 2-3 examples with scenarios.
Edited by: 994943 on 20-Mar-2013 19:14

Difference between "Physical Read Total IO Requests Per Sec" and "Physical Read IO Requests Per Sec"

What is the difference between "Physical Read Total IO Requests Per Sec" and "Physical Read IO Requests Per Sec" metrics in dba_hist_sysmetric_summary?

From docs (Reference, Statistics Descriptions) :
physical read IO requests : Number of read requests for application activity (mainly buffer cache and direct load operation) which read one or more database blocks per request. This is a subset of "physical read total IO requests" statistic.
physical read total IO requests : Number of read requests which read one or more database blocks for all instance activity including application, backup and recovery, and other utilities.

Difference between poh and pov in module pool programming

hi all,
                   pls tell me difference between poh and pov and how i check validation in screen

Hi,
POV gives you F4 help.
like:
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD f MODULE mod.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field f, the system calls the module mod belonging to the FIELD statement. If there is more than one FIELD statement for the same field f, only the first is executed. The module mod is defined in the ABAP program like a normal PAI module. However, the contents of the screen field f are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These alll have the prefix F4IF_. The most important are:
·        F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
·        F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The self-programmed value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT demo_dynpro_f4_help_module.
TYPES: BEGIN OF values,
         carrid TYPE spfli-carrid,
         connid TYPE spfli-connid,
       END OF values.
DATA: carrier(3) TYPE c,
      connection(4) TYPE c.
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values,
      values_tab TYPE TABLE OF values.
CALL SCREEN 100.
MODULE init OUTPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'CARRIER'.
APPEND field_value TO dynpro_values.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE value_carrier INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            tabname     = 'DEMOF4HELP'
            fieldname   = 'CARRIER1'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CARRIER'.
ENDMODULE.
MODULE value_connection INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT carrid connid
    FROM spfli
    INTO CORRESPONDING FIELDS OF TABLE values_tab
    WHERE carrid = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'CONNID'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CONNECTION'
            value_org   = 'S'
       TABLES
            value_tab   = values_tab.
ENDMODULE.
*POH gives you F1 documentation:*
like:
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
       VAR(4),
       INT TYPE I,
       LINKS TYPE TABLE OF TLINE,
       FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
    WHEN 1.
    VAR = '0100'.
    WHEN 2.
    VAR = '0200'.
    INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
       EXPORTING
            DOKLANGU                      = SY-LANGU
            DOKTITLE                      = TEXT-002
            CALLED_FOR_TAB                = 'DEMOF1HELP'
            CALLED_FOR_FIELD              = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
       EXPORTING
            DOKCLASS                      = 'TX'
            DOKLANGU                      = SY-LANGU
            DOKNAME                       = 'DEMO_FOR_F1_HELP'
            DOKTITLE                      = TEXT-003
       TABLES
            LINKS                         = LINKS.
ENDMODULE.
Regards,
Renjith Michael

Exact difference between se09 and se10

Hi all,
i want to know the exact difference between se09 and se10 .
i know
SE09 is the workbench transport requests transaction - here the developers can track changes to all ABAP workbench objects (dictionary, reports, module pools, etc). This is a developer-specific transaction and mostly all developers have access to this transaction.
SE10 is the customizing request display transaction - this displays all the customizing requests in the system. Again, this could be restricted to Business analysts if required, since they would be doing most of the customizing changes in the system.
but i think this is not the correct answer which is already appear in the thread list
recently sombady has answer like the one which i have mentioned above but the interviwer said that this is wrong.
CAN ANYONE TELL ME THE EXACT ANSWER AND HELP ME OUT.
Regards
fareed

Hi Fareed,
First of all, i would say its a nice obsevation. As soon as i saw your post i started checking both transactions in seperate window and i found something interesting.
My Observation is as follows:-
<b>When we create a Transaction, apart from the Transaction Name, Program Name, Screen Number etc., we also can give someting called "AUTHORIZATION FOR CALLED TRANSACTIONS", under the menu: UTILITIES of the window.
Also we can use TRANSACTION:SE97, Maintain Transaction call Authorization in CALL TRANSACTION. Here we maintain the list of TRANSACTION CALLED for our Calling Transaction.
Now if you see, this list for Transaction SE09 and SE10, The Authorization for Called Transaction Differs a lot. Hence the difference bettween SE09 and SE10 is mainly the AUTHORIZATION Objects.</b>
<b>NOTE:</b> This is my own observation, so there are chances of misinterpretation from my side, accounting to the human err. But this is something new to me too.
Thanks and regards,
RAVI :).
PLEASE AWARD POINTS IF YOU FEEL MY SOLUTION TO YOUR QUESTION IS RIGHT $-).

Difference Between SE09 and SE10

What is the Difference Between SE09 and SE10?

hi
caliber
there is no difference between this two t_codes.
both they are used for transport the request.
Hope this helps you.

Difference Between Cofiles and Datafiles

Hi
Can Any one pls explain the Difference Between Cofiles and Datafiles in Trans Directory.
Need to know their Role and Internal Process in Transporting the Request or a Client.
Thanks in Advance
Dan

Hi,
Data file contains actual change data.
Cofile contains information on change requests (different steps of a change request and their exit codes).
So you will find cofile of same size for all requests.
Regards
Payal
Message was edited by:
Payal Patel

Difference between collect and move stmts

hi
anyone plz explain...
1. Difference between collect and move stmts
2. Badi and user exit.
gowri

Hi,
1.COLLECT:COLLECT is used to create unique or compressed datsets. The key fields are the default key fields of the internal table itab .
If you use only COLLECT to fill an internal table, COLLECT makes sure that the internal table does not contain two entries with the same default key fields.
If, besides its default key fields, the internal table contains number fields,the contents of these number fields are added together if the internal table already contains an entry with the same key fields.
If the default key of an internal table processed with COLLECT is blank, all the values are added up in the first table line.
If you specify wa INTO , the entry to be processed is taken from the explicitly specified work area wa . If not, it comes from the header line of the internal table itab .
After COLLECT , the system field SY-TABIX contains the index of the - existing or new - table entry with default key fields which match those of the entry to be processed.
COLLECT can create unique or compressed datasets and should be used precisely for this purpose. If uniqueness or compression are unimportant, or two values with identical default key field values could not possibly occur in your particular task, you should use APPEND instead. However, for a unique or compressed dataset which is also efficient, COLLECT is the statement to use.
If you process a table with COLLECT , you should also use COLLECT to fill it. Only by doing this can you guarantee that the internal table will actually be unique or compressed, as described above and COLLECT will run very efficiently.
If you use COLLECT with an explicitly specified work area, it must be compatible with the line type of the internal table.
In 'move' the actually data copies into another data field
2.
Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
A. BAdI Definition
1. SE18
2. Enter the name for the BAdI to be created in customer namespace and press "Create".
3. Enter a definition for your BAdI and on the interface tab enter a name for the BAdI interface. SAP proposes a name and it is pretty good. Meanwhile a BAdI class is also created which is not in our concern.
e.g for "ZTEST", SAP proposes "ZIF_EX_TEST" for the interface and "ZCL_EX_TEST" for the class.
4. Save your BAdI.
5. Double-click on the interface name. It will pass to a Class Builder session to make you implement your interface. If you are not familiar to the Class Builder; it's a bit like Function Builder and it will be easy to discover its procedure.
6. Save and activate your interface.
B. Calling your BAdI from an application program
1. Declare a reference variable with reference to the Business Add-In interface.
e.g. DATA exit_ref TYPE REF TO zif_ex_test.
2. Call the static method GET_INSTANCE of the service class CL_EXITHANDLER. This returns an instance of the required object.
e.g.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
CHANGING instance = exit_ref .
3. After those two steps, you can now call all of the methods of the BAdI where it is required in your program. Make sure you specify the method interfaces correctly.
C. BAdI Implementations
1. SE19
2. Enter the name for the BAdI implementation to be created in customer namespace and press "Create".
3. It will request the BAdI definition name to which this implementation will be tied.
4. Enter a definition for your implementation and on the interface tab enter a name for the implementing class. Again SAP proposes a name and it is pretty good.
e.g for "ZIMPTEST", SAP proposes "ZCL_IM_IMPTEST".
5. Save your implementation.
6. To implement a method, just double-click on the method name and you will be taken to the Class Builder to write the code for it. Here you redefine the BAdI interface methods.
7. You must activate your implementation to make it executable. You can only activate or deactivate an implementation in its original system without modification. The activation or deactivation must be transported into subsequent systems
Regards

Difference between ok_code and sy-ucomm

Hi,
Can any one tell me the difference between ok_code and sy-ucomm

Hi,
Actually OK_CODE and SY-Ucomm are the same. But experts suggest use of OK code for following reason:
In each PAI event that a user triggers by choosing either a pushbutton on the screen or an element in a GUI status, the corresponding function code is placed into the system field SYST-UCOMM or SY-UCOMM and placed in the OK_CODE field (as long as the function code is not empty). Empty function codes are placed in neither the SY-UCOMM field nor the OK_CODE field.
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.

What is difference between Iterator and Collection Wrapper?

Hi all,
I dont understand the actual difference between Iterator and Collection Wrapper. I observed both are used for the same purpose. Could any one please let me know when to use Collection Wrapper and when to use Iterator??
Thanks,
Chinnu.

L_Kiryl is right.
Collections support global iteration (through collection->get_next( )) and local iteration (through iterator->get_next( )).
Each collection has a focus object. Initially, the first object has the focus.
Any global iteration moves the focus, which is published by the event FOCUS_CHANGED of the collection.
If you want to iterate on the collection without moving the focus (and without triggering timeconsuming follow-up processes) you can use local iteration. To do so, request an iterator object from the collection and use this to iterate.
And one more advantage of using iterator: it takes care of deleted entities. If you use global iteration then when you reach deleted entity it will be an exception. But there is no exception with iterator in the same situation.

What is the difference between PUSH and FETCH

I am a little confused. I use my iphone for both my personal POP email accounts and my business exchange account. I am trying to save as much battery as I can so I turned off push and set everything to manual...but now when I try and get may mail....it either says "connecting" or "checking for new mail" at the bottom of the screen and nothing happens from there.
What is the best way to setup this situation for the most battery life? I don't need it to automatically download emails just when I open the email accout would be nice.
I also noticed that when I delete an email from my iphone on my exchange account, it also deletes is on my desktop at work...I need to turn this off...is it possible?

Hi maxum25,
The difference between push and fetch is that:
When using push, the server sends a signal to the iphone and lets it know that an email is coming its direction. Kind of like receiving a call. The iphone does not need to do anything except receive the email.
When using fetch, the iphone has to wake up every so often and send a request to the server to see if there is any new email waiting for it on the server to download. This takes more time because the iphone sends a request, the server says yes there is some, the iphone says ok give me the new email.
Now the exchange email uses active sync to keep all changes on the exchange server and mobile device in sync. This is automatic and is the nature of exchange and active sync. In order to keep this from happening you would need to talk to your IT dept. and see if they have an imap or pop alternative. Even using imap reflects the changes back to the server.
Hope this helps.

Difference between sendRedirect and RequestDispatcher?

Difference between sendRedirect and RequestDispatcher?

I have a situation of needing to redirect a request to a URL that is outside of the container. The scenario is the following, we have a simple logging in servlet that takes some POST parameters (username, password, and other values.) Depending on the username and password, the logon request along with all its POST parameters need to be redirected integrally to another machine. How do i do a redirect with all my parameters intact? sendRedirect does not seem to have any (visible to me) mechanism to do this. We cannot send them on the URL as this will reveal things too easily to our users and we don't want them to bookmark the resulting page.
Thanks for any help,
t

Difference between forward and redirect

difference between forward and send redirect

+ a Redirect will change the URL in the browser, whereas a forward will not.
+ a Redirect can be any URL, whereas a forward has to be directed to a resource within the container,
+ a Redirect MUST be an absolute URL (though the Servlet functions will do this for you).
+ a Redirect, being a new request, triggers filters, whereas a forward does not.

Difference between u2018Workbenchu2019 and u2018Customizeu2019 Transport request.

Similar Messages

Maybe you are looking for