Difference btw J2ME and SAP MI

Hi All,
I have a basic doubt , what is difference btw J2ME and SAP MI.
I understand while J2ME devlopment we develop MIDLET and how do we call the Midlet in Mibile ??
What is the advantages of both and limitation of j2me , stopping me not use that and go for SAP MI
Advantages of sap mi in a nustshell would be appreciated.
Thanks for reply
Regards
Srinivas

Hi Srinivas,
SAP MI currently known as NetWeaver Mobile 7.10] could be seen as a technology platform to mobilise enterprise applications(for occassionaly connected / disconnected scenarios)
Mobile consists of a server component named Data Orchestration Engine [DOE] and a java based Mobile client for Windows Mobile devices. DOE is an ABAP component that acts as an interface between your SAP/non-SAP Backend [like ERP, CRM etc] and the Mobile device by staging the data , distributing it to relevant receivers with extensive monitoring capabilities with a model driven approach.
DOE talks to backend via Bapiwrappers / webservices and talks to mobile device (client running on the device) with a messaging protocol over http(s).
Apart from the default java mobile client that is shipped from SAP , any custom client written in any native client technology could be integrated to DOE.
There is also a co-innovation model along with partners like sybase where there are some mobile solutions already available in market like mobile sales that could be run on smart phones like iphone,blackberry etc.
You can checkout several articles and blogs available in sdn itself for Mobile for understanding more about this .
Regards,
Liji

Similar Messages

  • What is the difference between ERP2004 and SAP 47 Enterprise?

    Currently we have SAP 47 Enterprise with WAS 6.2. I understand ERP2004 is NW and 6.4 sp9. Can any one please let me know the major difference between ERP2004 and SAP 4.7 Enterprise ( more from abap / workflow view)?
    Thanks
    Swamy

    From Abap point of view some of the major add-on in erp2004,netwever :
    1) Development of webdynpro studio for java development for portal and iviews.
    2) Major abap development uses <b>Abap object oriented</b> methodology, rathet hten old conventional Abap,i.e MVC model (Model,View,Controller) where in it uses concept of classes,interfaces,etc.
    3) Advanced BSP tech using MVC model to develop web based modules
    4) It is closesly integrated with web-based CRM and BW/APO

  • What is the difference between mySAP2004 and SAP ERP 2004?

    Hi,
      Can anybody tell me what is the difference between mySAP2004 and SAP ERP 2004?
    If someone has the document, then please mail me at [email protected]
    With Regards
    tiffny

    Hi Tiffny,
    actually I don't see a difference as "mySAP2004" is not an official name for anything
    There is "mySAP ERP 2004" which is the marketing name for a bunch of functionality provided by several different bits of software components.
    Hth,
    Michael

  • Difference btw BOE and LC ?

    Hi all,
    Whats the difference btw BOE and LC ?? As I am not having good domain, plz if anyone having some good documenattion regarding general workflow in companies, plz send me to [email protected] or paste here.
    Suresh

    Check the below link .May be useful.
    http://www.netmba.com/accounting/
    Regards
    Aravind

  • What's the difference btw JDK and SDK?

    I went to the download page,some of the download are for J2SE Development Kit (JDK) ,some others are J2SE Software Development
    Kit (SDK)?Are there any difference btw them?

    Sun changed the label from SDK to JDK when Java 5 was
    released.There was at least one earlier change, I believe, so it seems it was JDK, then became SDK (or J2SDK) and now back to JDK.
    In the context of Java, if you're not a purist about matching a particular acronym with a particular version, then the two are interchangeable.

  • Hi can some tell me what is the difference between sapr3 and sap business 1

    is there any difference between sap business one and sap r3 if i learn sd module

    Hi Siva,
    The SD module from R/3 is completely unrelated to the business processes and technologies used in SAP Business One (SBO). R/3 and SBO are completely different products and direct comparisons are difficult. I don't think learning one will help in any degree in learning the other. With R/3 you tend to specialise in one area (eg SD) as the complexity and scale of implementations requires this specialisation. With SBO, a single consultant would be expected to know the whole product. SBO is a much simpler product designed for small to medium sized companies so the processes are much more generic.
    Kind Regards,
    Owen

  • Difference btw table and structure???

    Hi all guru's
    What is the difference between table and structure??
    culd you explain me???
    regards
    ss

    hi Supriya,
    structure is one single line, while a table can have as many lines as you wish.
    hope this helps
    ec

  • Difference btw utl_file and dbms_lob

    hi,
    what is the difference between utl_file and dbms_lob , is that doing same acess file or difference?

    797525 wrote:
    what is the difference between utl_file and dbms_lob , is that doing same acess file or difference?
    UTL_FILE is a PL/SQL package that provides PL/SQL code with the standard operating system I/O interface. You will find this same interface in languages like C, C++, Pascal, PHP, Perl and others.
    DBMS_LOB is a PL/SQL package that enables you to manage a LOB data type in Oracle. This data type is "special" in that it can contain large data objects (like video, sound, images, documents, spreadsheets, etc).
    So technically, there is very little that is the same between the two.
    Conceptually however, both are interfaces to "files". The only difference is that UTL_FILE access external files (on an operating system's file system). Whereas DBMS_LOB provides the ability to create and store and manage "files" directly in the database. (there is also a BFILE data type that looks like a LOB but is actually an external file)
    It is seldom a good idea to step outside the database into an o/s file system using UTL_FILE. There are security and access control issues. Issues with concurrency and transactions. Issues with data integrity. Issues with backup of such data. Etc.
    So in general, when you deal with the concept of "+files+" in Oracle, you should be looking first at using the Oracle database itself - and deal with files as LOBs using DBMS_LOB.

  • Differences between Oracle and SAP ERP

    Hi All
    I have a Industrial project which is currently having oracle.
    I would like to give them a presentation on SAP ERP and its modules.
    Does any1 have a ppt which highlights the advantages of SAP over Oracle. and stating its major differences.
    Please send it ASAP.
    Thanks and Regards

    Hi.......
    Check this link :
    The key difference between SAP and Oracle
    http://searchsap.techtarget.com/news/article/0,289142,sid21_gci1294788,00.html
    http://www.itjungle.com/two/two032807-story03.html
    http://searchmanufacturingerp.techtarget.com/news/article/0,289142,sid193_gci1325932,00.html
    Hope this helps you...........
    Regards,
    Debjani..........

  • Difference btw Shuffle and Shuffle/Repe

    This may sound like a dumb question, but what is the difference between the Shuffle mode and the Shuffle/Repeat mode?

    In theory, Shuffle will play all songs in the queue once in random order then stop. Shuffle Repeat will play all songs in the queue once, then repeat.
    In reality if you have a LOT of tracks in the queue it may well repeat before it gets to the end of the list, as the shuffle memory is limited.

  • I do not what tech. is lacking in iphone 4 that prevents it to be able to support turn by turn navi. I do not see any difference btw 4 and 4s and yet 4S can support turn by turn. very disappointed with apple and i will not purchase iphone5.

    I do not know what tech. s lacking in iphone 4 that prevents it to be able to use turn by turn navi. I do not see any difference between 4 vs 4S and yet 4S is able to support it. I am very disappointed with apple as i was when 4S was released. I will not purchase iphone5 becuase i think its nowhere near what apple calls it "perfect". there are plenty of other phone around. Lumia 920 for example is a much better phone. Just disappointed with apple...

    http://www.apple.com/ios/whats-new/
    the fine print in the map section states that turn by turn is only available for 4S and up.

  • Difference btw simulator and actual disc behavior

    Okay, so I have a project in which the buttons behave properly in the simulator, but then on the finihsed disc it's all wonky!
    To be specific, I have it so that, if you're playing a track and are up to chapter 10 when you hit MENU, it takes you to chapter 10 in the chapter listing. And in the simulator, it does this.
    However, when I burn the disc, or otherwise watch the TS folder in DVD Player, when I hit MENU, instead of going to the current chapter, it goes back to the first chapter in the first MENU, regardless of where I am. Anyone know what I'm overlooking?

    I use this method all the time, specifying the chapter index buttons as the menu jumps for markers in a track, and it usually works both places. (Simulator, build in DVD Player, burned disc...)
    I can imagine a few things that might have this effect:
    are there any stories, etc., attached to your track? markers in a track can overrride the default menu jump for the track, but stories will override default behaviors for both the track and its markers.
    Are there any pre-scripts on your menus or tracks? Assigning pre-scripts can sometimes supersede other DVDSP commands, such as button selection. In the DVD spec, commands that are processed before a menu or title are referred to as pre-commands. Specifying a button on a menu as a target winds up using the pre-command on the menu to select the specific button, but if you set a pre-SCRIPT for the menu in DVDSP, DVDSP will apply that to the menus pre-command instead of the button selection specification. One of the few remaining ways in which DVDSP is not a completely spec-based tool.
    Try assembling a quick plain-vanilla test with a new project and check a build in DVD Player to make sure it's not something specific to your project.
    Hope this helps -
    Max Average

  • Difference btw OBI and BO

    Hi,
    We are very big financial institution in europe, we are in transition period of migrating our core banking platform to new platform. We are currently using Business Objects(BO) as our REPORTING tool for our oracle database, Our new core banking application is FLEXCUBE which is again from Oracle Financial services (formerly known as iflex).
    Now that we need to make a decision and comparision between the features of OBI and BO.
    Could anyone give us PRO's and CON's on OBI and BO ?
    Thanks in advance
    Shankar.

    Shankar,
    It's one thing to ask for a specific question - another to request a free gap-analysis.
    Most people here volunteer their time , because it helps them to learn.
    not to diss you or anything - but it seems as you're trying to make someone else do the work for you.
    Good luck.
    so you don't feel bad - there's a link to the comparison
    http://businessintelligence.ittoolbox.com/groups/select/bi-select/oracle-bi-server-ee-vs-cognos-8-bi-1426419
    Edited by: wildmight on Sep 25, 2008 8:16 AM

  • What is the difference btw  EXPINV and  INVOIC

    INVOIC :Invoice / Billing document
    EXPINV : Export invoice
    What is the fifference between these two message types.
    I need to trigger Idoc once the INvoice verification is done using MIRO t-code. I mean I need to send Actual cost of the material to 3rd party application using XI after Invoice is verified. Iam just wondering which Idoc I need to trigger? Please help..
    Message was edited by: Ram Krish

    Hi Ram,
    Message type <b>INVOIC</b> is used to transmit the invoice to the customer for the shipped goods.
    Message type <b>EXPINV</b> is used to transfer foreign trade information from R/3 to an external system.
    For more information, please check this link.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDFTCOM/SDFTCOM.pdf
    For your case, you can use message type INVOIC to send actual cost of the material to 3rd party system.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • What is exactly difference btw individual collective call blank and 1?

    Hello all
    Could you please to help me get ride of that what is exactly difference btw blank and 1 in MTO scenario?
    it is better if you guy can show me a example.
    Thanks

    Hi,
    In case of any requirement through sales order, it will be the special stock categoery E and material should have Individual and Collective Indicator as 1 in MRP4 view .It depends on what item category you are going to use in the sales order .
    In MTS strategy, You can't achieve based on each requirement But you can get the plan order( system will combine all the requirement ) generated.
    Example
    If you have Asembly Material A, and components X,Y & Z for A.
    For MTO
    MRP generates the Planned Order for the Assembly and components with respect to the sale order requriement.
    Fot MTS
    MRP generates the Planned Order for the assembly and components based on the stock requirement.
    Regards,
    Sundhu

Maybe you are looking for