Different batch no in prod order at the time of creation of prod order

Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

Dear,
Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
Refer this thread,
Re: Batch creation
Please try and revert back.
Regards,
R.Brahmankar

Similar Messages

Issue at the time of creation of transfer order for inbound delivery

Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
Nikhil

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Enter batch at the time of creation of trnasfer order

Hi,
We have set up batch managment at material level.
We have some material in warehouse without batch managed.
For these materials when i am moving from storage location by two step method Intially i am able to generate amaterial document for the two step method movement type 313.
When i am doing the transfer order for the material document i am getting an error message saying that 'enter a Batch' inspite of the material is not a batch managed material
Message no. M7041
kindly help me how to resolve
Sunil

try to enter a date of manufacturing on the batch tab on item detail area and see if the system is generating any batch no. by itself. U can enter date of manufacturing as todyas date also.

Need to add a custom defined partner at the time of creation of sales order

Hi Experts,
I request you some solution for me in this urgent requirement.
Scenario 1:
I have to create a partner in the sales order based on some validations with repect to bill-to party and ship-to party. The validations if success, will return me the data from an 'Z' function module which i need to populate to the new partner that will be created in the sales order.
I am using the program MV45AFZZ and the userexit USEREXIT_SAVE_DOCUMENT_PREPARE.
Now after getting the data for the new partner to be added, i have done this code..
      LOOP AT ws_dealer.
        xvbpa-kunnr = ws_dealer-kunwe.
        xvbpa-parvw = 'ZD'.
        xvbadr-telx1 = ws_dealer-primaryid.
        xvbadr-name1 = ws_dealer-physname.
        xvbadr-stras = ws_dealer-physstreet.
        xvbadr-ort01 = ws_dealer-physcity..
        xvbadr-regio = ws_dealer-physstate.
        xvbadr-pstlz = ws_dealer-postalcode.
        xvbadr-land1 = ws_dealer-ctrycode.
        xvbadr-telf1 = ws_dealer-phone.
        xvbadr-telf2 = ws_dealer-fax.
       xvbadr- = ws_dealer-email.
        xvbadr-telbx = ws_dealer-distance.
        APPEND xvbadr.
        APPEND xvbpa.
      ENDLOOP.
Now i'm getting the new partner number in the partners tab in sales order, but the new address details are not getting updated and the ship-to party address is only appearing in the screen.
Also i'm finding difficulty in updating the telex, email information in the sales order.
Scenario 2:
There are cases where some sales orders are getting created through an idoc. In that case, i have to populate the values from idoc especially the address details of all the partners to the screen and update the sales order.
Apart from populating value to all the partners, the process of scenario 1 will have to be carried again to create the 'Z' partner (if validation is successful).
For this case, i do not know which userexit i need to use. and how to go about this..
This is having a very tight deadline and it is extremely urgent for me.
Please help with your valauble answers.
Your help would certainly be appreciated and rewarded.
Thanks,
Ananth

Hi Mahulenka,
Thanks for your reply. I do not want the data from the customer master.
The partner data will come in the idoc and i wish to put the data in the sales order based on some validation for the standard partners like WE/AG/RE/RG.
The client has developed some 'Z' function module which contains the functionality of SAP FM - IDOC_INPUT_ORDERS.
Now for the partner which i'm creating 'ZD' i believe i should update the indicator UPDKZ to 'I' for XVBADR table as it is a new record. Why should i update in XVBAP table and i'm adding only partner and his address details. Also i think all this change i should put in USEREXIT_SAVE_DOCUMENT at the point of saving.
Please advise.
Thanks,
Ananth

Auto batch determination at the time of picking by transfer order

Hello,
Our problem is, at the time of creation of transfer order with reference to delivery, system can not pick up the batches automatically as per the SLED. We have to manually enter the batches as per the SLED. Could you please guide me step by step procedure of automatic batch determination as per SLED at the time of creation of transfer order with reference to out bound delivery? (Please state step by step procedure of automatic batch determination as per the SLED at the time of picking with transfer order)
Thanks
Milind

Hi,
As for remaining shelf life please check OSS note 33396, 72771. Additonally this may also help:
http://www.renet-web.net/2008/09/05/sap-batch-determination-made-easy/comment-page-1/
As for sorting according to SLED date please read OSS note 769036.
Regards,
Csaba

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

Problem at the time of creation order

Dear Gurus,
facing update termination error at the time of creation/change the sales order..in development system
after some analysis, found one more error due to which above mention error is coming
report run : "RMCSUTIC" : check utility logistic info system
after running this report system giving error message "Unit O2 : No DDIC Information for source field OI0BW_ADQN - OIMSEHI1"
but when but in production server it's working fine without error message
kindly suggest some solution for the same
Regards,

No DDIC Information for source field
You may have to check the following notes. Take the help of your basis team.
1) 542872
2) 557683
3) 579022
4) 645136
thanks
G. Lakshmipathi

Creation of service order at the time of despatch(invoicing)

Hello PP Gurus,
Is it possible to trigger a service order at the time of despatch(invoicing).If yes how.
Thanks in advance.
Sudarshan

I think it is not possible in standard SAP.
You have to go for enhancement(user exit).

Not checking the budget for internal order at the time Travel Request creat

Hi All,
I have two issues.
(1) We activated travel managment in our system for public sector germany. In that case we need to create trip directly from PR05 instead of TRIP. I created budget for internal order but its not controlling and checking budget at the time of creation of the trip. We activated fund management also but i need control at internal order level. Please guide me.
(2) While creating trip in PR05 what ever expenses mentioned in Trip it's committing and also i am able to see in fund management commitments report. We extracted reports based on COSP table. This commitment is not updating in this table. Please guide me which table is showing link between internal order and fund management account assignment objects.
Regards,
sree

thanks for your reply.
I maintained Budget profile and Tolerance limits. I am getting error only at the time of posting in PRRW.But i need to control at the time of saving the trip. I can use user exit to control. If there is any standard functionality of checking the budget at the time of saving then it should be good.
For me main problem is i am not able to get report both trip commitments and fund management details. Please inform me in which table internal order and trip commitments are storing.
Regards,
Sree

Alert message is needed at the time of creation ,if it reaches ,the maximu

DEAR SA EXPERTS,
Can you please me that alert message is needed at the time of creation ,if it reaches ,the maximum stock level (Stock+level)
Thanks
Mohit

Hi,
Please refer the below links.
Alert Message
Re: Alert Message
Hope it helps you.
Thanks.

At the time of creation of POaccount assignment is coming mandatory

Dear all;
At the time of creation of PO system showing the msg that the account assignment is mandatory for the material ,how to overcome this?
Kindly suggest whre in material master record I can change settings for account assingment ,or the control is somewhere else.
Regards;
Joydeep Mukherjee

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Seperate/Different COGS at the time of delivery from sales order

Hi Friends,
I have a reqirement where i need to hit different COGS accounts at the time of goods issue for a sales order, based on distribution channel. All sales would have same order type and all the parameters (material, item catagories, customers etc etc) are same, except for the distribution channel.
For example Sales Org/D.channel/Div S001/01/01 should hit like
CR: ABC Inventory
DB: COGS 1
and for Sales Org/D.channel/Div S001/02/01 should hit like
CR: ABC inventory
DB COGS 2.
Limitations:
1. I do not have choice of creating a seprate order types for these sales
2. Creating a new movement type is an option, but i would like this to make it as last option.
Directions for soutions.
1. Has any body implemented BADI for such case. If yes, request to share the BADI name.
2. can we use Substitutions, Is subsitutuions possibile for replacing the GL Accounts at the time of posting?
Any directions would be of great help

Dear,
You can put the substitution at the Document Line level, please write below logic:
Prerequisite:
BKPF-BLART = "WA" & BSEG-HKONT = "you normal GL Account which will is picked normally"
Substituin:
BSEG-HKONT User Exit
Now in this user exit as ABAPer to write code as per below logic
1. Pick BSEG-VBEL2, pass the same in VBAK-VBELN and check VBAK-SPART if this is 01 then move COGS 1 to BSEG-HKONT where transaction is GBB,
similary write the sam elogic for Dist Channel 2
Hope this helps
Br, Vivek

Batch selection at the time of GR for Process Order

HI experts,
I have the following problem -
I have got a process order of 51, at the time of order creation I have assigned/created 2 batches for the process order using some development and making use of user field. Now at the time of GR after final confirmation, I want to select the batch number for the required quantity, i.e I want to do the GR for both batches, and I want to select the specific batch from the assigned 2 batches. I am facing a problem that , the GR by default selects the first batch of the order and the batch number field greys out. I am not able to select the second batch if I go for second GR of the same process order.
How can I make the field selectable , such that I can select the required batch at the time of GR.
Regards
A S K

There is a possibility to use batch split- kindly check if you are able to do this
Reg
Dsk

Production order in the additoanl tab b in sales order

Hello gurus,
I have to create a new field on sales order item(additional tab b) where the production order would be filled via a batch job.
Then i have to create a z-program to populate the new field added (this would run everyday).
selection screen would have sales order(optional)
sales org (required, multiple values possible)
plant (required, multiple values possible)
date (required field representing the date from which update is to be seen)
logic:
for a particular date find all the sales order changed after that date.
read for all these whether there is a production order linked to it.
(this can be done by reading all production oreders enterd/chnged after that date.
for every sales order look for the value of variant characterstics b_sales_order & b_sales_order_item using method get_prod_order_multiple)
look for sales order item with the value of this characterstic and populate the new additional field with production order.
please advice how to proceed.
Moderator message: "spec dumping", please work yourself first on your requirement.
Edited by: Thomas Zloch on Feb 27, 2011 6:38 PM

hi,
You can changes the settings in OPU3 and also you can do it in CO03.
If you want to restrict the user for backward scheduling except for some cases then you can do this in CO03 other wise it is better to do it in OPU3 transaction. Both cases you need to enter max days for back dated scheduling.
For doing it is CO03 follow the pat from order header data screen.
Menu...
Order>>settings->scheduling parameters.
Hope this can help.
regards,
kaushik

Why can't I view my bookmark folders in alphabetical order when I click on the bookmark button on the browser? Is there a way to see the folders in alphabetical order all the time?

I click on the bookmarks button on the Firefox browser and the folders that hold the bookmarks are not in any particular order. I would like the folders to be in alphabetical order when I see them...when I click on the bookmarks button at the top of the browser. When I go to organize bookmarks I can sort them so they are in alphabetical order, but they do not show up that way when you just click on the bookmark button to get to your bookmarks. Any help would be greatly appreciated! Thank you!!

http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

Different batch no in prod order at the time of creation of prod order

Similar Messages

Maybe you are looking for