Different behavior when running in Eclipse and on Tomcat

I am having a problem because the program that I wrote, tested, and work fine on Eclipse doesn't have the same behavior when I convert it to a Web Service and called by a client.
I have not this strange behavior. See this code:
NamedNodeMap attrs = node.getAttributes();
System.out.println(attrs.getNamedItem("performance"));When I run it on exist I got something like this:
org.apache.crimson.tree.AttributeNode1@11bed71which should be correct since attrs.getNamedItem() return a Node.
But! When I run it as a web service on Axis hosted on Tomcat I got
performance="3758.0"???!!!
Also, when I do something like
System.out.println(node)In Eclipse I got the whole XML file like this:
<root><sequence name="main" performance="3591.5" cost="63.5" reliability="4144965.2" availability="0.9863115" integrity="1.0" security="128.0">
          <switch name="switch-1" performance="3591.5" cost="63.5" reliability="4144965.2" availability="0.9863115" integrity="1.0" security="128.0">
               <case condition="bpws:getVariableData('i') = 0" performance="3425.0" cost="77.0" reliability="1.0" availability="1.0" integrity="1.0" security="128.0">
                    <invoke name="invoke-2" partnerLink="HotelBooking" portType="nsxml2:HotelBooking" operation="searchHotel" inputVariable="searchHotelParam" outputVariable="searchHotelResult" serviceKey="95EDCDE0-46F6-11DA-BEB0-90CACF0DCD6A" />
               </case>
               <otherwise performance="3758.0" cost="50.0" reliability="8289929.5" availability="0.972623" integrity="1.0" security="128.0">
                    <while name="while-1" condition="bpws:getVariableData('i') > 0" performance="3758.0" cost="50.0" reliability="8289929.5" availability="0.972623" integrity="1.0" security="128.0">
                         <sequence performance="3758.0" cost="50.0" reliability="8289929.5" availability="0.972623" integrity="1.0" security="128.0">
                              <invoke name="invoke-1" partnerLink="FlightBooking" portType="nsxml0:FlightBooking" operation="searchFlight" inputVariable="searchFlightParam" outputVariable="searchFlightResult" serviceKey="AD5A1880-46EC-11DA-B399-97115D85E15E" />
                         </sequence>
                    </while>
               </otherwise>
          </switch>
     </sequence></root>but on Axis I got:
[root: null]I'm confused. I think it might be because of the different version of the library between eclipse environment and axis environment. But the problem is, I can't figure out what JAR should I change. Can you give me a clue??

DOM doesn't specify what the toString() method of Node etc. should return. So each implementation of DOM chooses something that seems reasonable to the implementers. If this isn't suitable for you then don't use the toString() method. (That's what System.out.println calls when you pass it an Object, in case you didn't know.)

Similar Messages

Different Colors when printing from Photoshop and InDesign CS3

Different Colors when printing from Photoshop and InDesign CS3
I have the following problem:
When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
The manufacturer however told me to let the PostScript printer handle the colors.
When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
·Photoshop CS3
·InDesign CS3
·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
·Printer: Xerox Docucolor 3535
·Printer profile: ISO Coated
How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
Thanks a lot!

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

QUERY when run on WEB and RSRT then RRI show selection screen on receiver.

Hi,
    We have two query: Query 1 and Query 2.
    Query 1 can be RRI to Query 2.
   The variable for fiscal period and Forecast version are both mandatory. The selection for plan version is optional.
   When run this on BEx Analyzer, the jump work smoothly without pop-up of selection screen of the receiver query.
   However, when run on RSRT and Web, the selection screen is being pop-up and you need to press execute button before the 2nd query will be shown.
   The value of the variables is pass correctly.
    Fiscal Period on 1st query is being restricted by two variables.. one interval variable on Free characteristics.. and one single variable on restriction of key figure. The single variable is the one exist and passed on the 2nd query.
   Hope you can help me.

the only thing i can think of on the wbe is a setting for opening windows in tabs or open new window under tools for rsrt not sure, did you try to run it in HTML in rsrt?
it could be setting in SPRO for reporting worse comes to worse open a note with sap.

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

How to solve the error "The specified resource is reserved" when running with DAQmx And LabVIEW?

I hate "J term"
OK I love the learning the students get. And, I like helping them out! But, as a former man who's got the varicose viens to prove he's spent time "behind the podium" (yeah, "behind the podium" puts 'em to sleep- songs and dances for the young'uns) come on! USE the tools you teach!
Instructors invited to engage in the forums
Jeff

I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

Which disk won't mount? What version of OS X? Your post is impossible to answer with no useful information.

Different behaviors of Ant's MappingToolTask and "Refresh Mappings" in eclipse

Hello
I'm using KodoJDO 3.0 rc2.
I tried two different ways, to generate the mappings file and update the
tables in the database.
Strangely, they both behave differently:
1. using ant with the task: kodo.jdbc.ant.MappingToolTask -a refresh
does ignore all fields of type java.util.Calendar
2. using "Refresh Mappings" from the eclipse plugin
adds the Calendar fields correctly to the mappings file and the DB
tables,
but raises an exception, with an inverse-owner field (in 1:m) , which is
mapped correctly by the ant tasks
Do this two tools use different classes to generate the mappings and the
tables?
Is the Calendar datatype natively supported by Kodo?
Best regards
-- Pat

Patrick-
Is the Calendar datatype natively supported by Kodo?JDO does not offer native support for java.util.Calendar. You should be
able to easily support it using the externalization metadata extensions:
http://www.solarmetric.com/Software/Documentation/3.0.0/docs/manual.html#ref_guide_mapping_fieldmapping_extern
Please let us know if you are still experiencing the problems you
describe with the 3.0.0 final release of Kodo.
In article <bntvlu$k9q$[email protected]>, Patrick Sager wrote:
Hello
I'm using KodoJDO 3.0 rc2.
I tried two different ways, to generate the mappings file and update the
tables in the database.
Strangely, they both behave differently:
1. using ant with the task: kodo.jdbc.ant.MappingToolTask -a refresh
does ignore all fields of type java.util.Calendar
2. using "Refresh Mappings" from the eclipse plugin
adds the Calendar fields correctly to the mappings file and the DB
tables,
but raises an exception, with an inverse-owner field (in 1:m) , which is
mapped correctly by the ant tasks
Do this two tools use different classes to generate the mappings and the
tables?
Is the Calendar datatype natively supported by Kodo?
Best regards
-- Pat
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Working fine when running with eclipse, when exported, it doesnt.

I have made a little mp3 player with the help of Jlayer 1.0 library. Now, it is running perfectly when I run it from eclipse. But when I export it to a .jar file, strange thing happens.
The program starts ok, then I click add song button, a popup pops and wants me to choose a file, well I click the choose
the file button, it opens a JfileChooser, choose file, everything ok so far. Now, I want to click ok so that the song would be added to the program, but nothing happens when I click ok. when running eclipse it would add the song to the Jtree and so on, now it does absolutely nothing, the box wont disappear, no error message, nothing. I wanted to check if it was somekind of bug in the button, but it would seem it does do some basic statements on the beginning, but when it would have to create
new datastructure, it never comes back. I tested this with printing text when the program completed a statement and got the statement which makes the program idle. And the program doesnt freeze, it just wont do anything, and it wont even finish the method it is supposed when ok is clicked.
Any suggestions? Im totally clueless.

Yes, you probably don't have the application correctly set up to run outside of Eclipse. How to do that is different for each IDE. I am aware of the following tutorial for NetBeans, and (probably) Eclipse has something like that. You need to ask at the Eclipse website for that, since these forums are for the Java language, not Eclipse support.
http://www.netbeans.org/kb/articles/javase-deploy.html

Compressor making MPEG/AC3 files of different lenghts when running 8 cores

Hey guys, first off I am running Compressor 3.0.2 on a MacPro 2.8 GHz 8 core machine. My problem is that my files come out to a different lenght when I use my qmaster cluster to access all 8 cores while encoding mov's to MPEG2 & AC3. The difference between MPEG and AC3's are normally between 3 and 12 frames.
What I have found is that if I use "My computer" instead of the cluster that files are exactly the same. It makes me think there is an error in the joining of the files at the end. Using my computer right now is an okay solution, but I rather use all 8 processors as it cuts compressing in half.
Matthew

hi matthew,
seems a lot of people are having similar problems with compressor 3.02 (see the thread i started a couple days ago..) for me it's sending uncompressed mov's to compressor that are 23.98 fps. what is the framerate of your movies?
karl

Inconsistent result when running in c# and running in dos shell

Hi,
     I ran the following script in the MSDOS prompt and it worked fine and I get the string value:
But if I run it in c# with this routine:
   cmd = "cscript"
   arg = "/c RemoteReadReg.vbs " + computername + keypath;
     PInfo = new ProcessStartInfo (cmd, arg );
     PInfo.UseShellExecute = false;
     Process = Process.Start(PInfo);
     Process.WaitForExit();
The vb return with the error : script runtime error: Type mismatch in the line
    Wscript.Echo strValue
Do you know why the behaviour is different when run in dos shell as opposed to running in c#?
RemoteReadReg.vbs
Dim objArgs: Set objArgs = WScript.Arguments
Dim strComputer: strComputer=objArgs(0)
Dim strUser, strPassword
Dim objSWbemLocator, objSWbemServices, objReg
Dim strKeyPath: strKeyPath = objArgs(1)
Dim strEntryName
If (objArgs.length > 2 ) Then
strEntryName = objArgs(2)
End If
Dim strValue
Const HKEY_LOCAL_MACHINE = &H80000002
strUser = strComputer & "\user"
strPassword = "password"
Set objSWbemLocator = CreateObject("wbemScripting.SwbemLocator")
Set objSWbemServices = objSWbemLocator.ConnectServer _
(strComputer, "root\default", strUser, strPassword)
Set objReg = objSWbemServices.Get("StdRegProv")
objReg.GetStringValue HKEY_LOCAL_MACHINE, strKeyPath, strEntryName, strValue
Wscript.Echo strValue

Since the error occurs in a VBS script you should ask in a scripting forum, for example here:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
As far ProcessStartInfo is concerned I don't see an issue except a (probably) stray /c argument, cscript doesn't have such an option.
The real question is why do you even bother with this script? Same information can be obtained via C#, see here for an example:
http://stackoverflow.com/questions/1155633/how-to-obtain-a-registry-value-from-a-remote-machine-if-i-dont-know-its-type
It's more complicated because it tries to deal with every registry value type but if you only care about string value you can simplify that code a lot.

Process.Start - getting different output when running command using this method than I am if I run same command in CMD prompt

Hi
Creating an application to analyze .dmp files - all working well except this odd issue
If I open command prompt and enter this command:-
kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v"
Then it works and shows me all the output I need (shown at bottom of post)
If I run same command in VB.net using following code - then it doesn't give the same output - the bits I need at the end created by the !analyze -v switch don't appear
Any ideas why it is not seeing the switch correctly - setting a breakpoint and checking contents of startinfo seems to be showing correct cmd line i.e. "kd -z C:\windows\minidump\042414-24632-01.dmp -c "!analyze –v;q""
Dim myprocess As New Process()
myprocess.StartInfo.FileName = "C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"
myprocess.StartInfo.Arguments = "-z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
myprocess.StartInfo.UseShellExecute = False
myprocess.StartInfo.RedirectStandardOutput = True
myprocess.StartInfo.CreateNoWindow = True
myprocess.Start()
TextBox1.AppendText(myprocess.StandardOutput.ReadToEnd())
Output when run from cmd prompt:-
C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86>kd -z C:\Windows\MiniDump\042414-24632-01.dmp -c "!analyze -v;q"
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
1: kd> kd: Reading initial command '!analyze -v;q'
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: afa99150, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 88c557d7, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
MODULE_NAME: mfehidk
FAULTING_MODULE: 82e3e000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4d2e1e3e
READ_ADDRESS: GetPointerFromAddress: unable to read from 00000000
GetPointerFromAddress: unable to read from 00000000
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPagedPoolEnd
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
afa99150
FAULTING_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
MM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre
LAST_CONTROL_TRANSFER: from 82e7eaa8 to 82ecb879
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
ad0baf90 82e7eaa8 00000000 afa99150 00000000 nt+0x8d879
ad0bafa8 88c557d7 badb0d00 00000000 88c4ceb0 nt+0x40aa8
ad0bb040 88c4f97d 001a99b0 afa91000 00000000 mfehidk+0x377d7
ad0bb090 88c52b16 00770220 ad0bb0fc 00000010 mfehidk+0x3197d
ad0bb0bc 98d5fb73 ae770220 ad0bb0fc 00000010 mfehidk+0x34b16
ad0bb140 98d5fc43 ae738c30 98d6b62a aace7220 HipShieldK+0xb73
ad0bb168 98d6b882 ad0bb19c 00000000 98d77b44 HipShieldK+0xc43
ad0bb1b8 98d631a9 00000bd4 0000102c ad0bb208 HipShieldK+0xc882
ad0bb330 88c47795 00000bd4 0000102c ad0bb401 HipShieldK+0x41a9
ad0bb400 88c22b57 0000102c ad0bb460 85b3dee0 mfehidk+0x29795
ad0bb41c 88c232c6 ad0bb430 0000000c 8c4b6ce0 mfehidk+0x4b57
ad0bb43c 830a5acb adb6b9b8 0000102c ad0bb460 mfehidk+0x52c6
ad0bb4f4 830adaf8 adb16030 01b6b9b8 ad0bb550 nt+0x267acb
ad0bbc00 82e7b8c6 038ae710 038ae6ec 02000000 nt+0x26faf8
ad0bbc34 77a470f4 badb0d00 038ae3dc 00000000 nt+0x3d8c6
ad0bbc38 badb0d00 038ae3dc 00000000 00000000 0x77a470f4
ad0bbc3c 038ae3dc 00000000 00000000 00000000 0xbadb0d00
ad0bbc40 00000000 00000000 00000000 00000000 0x38ae3dc
STACK_COMMAND: kb
FOLLOWUP_IP:
mfehidk+377d7
88c557d7 0fb70c06 movzx ecx,word ptr [esi+eax]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: mfehidk+377d7
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: mfehidk.sys
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwner
quit:
output when run in my app:-
Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MiniDump\042414-24632-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
Executable search path is:
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18205.x86fre.win7sp1_gdr.130708-1532
Machine Name:
Kernel base = 0x82e3e000 PsLoadedModuleList = 0x82f874d0
Debug session time: Thu Apr 24 13:36:18.672 2014 (UTC + 1:00)
System Uptime: 0 days 0:00:38.703
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntkrnlpa The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the
command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {afa99150, 0, 88c557d7, 0}
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
*** WARNING: Unable to verify timestamp for HipShieldK.sys
*** ERROR: Module load completed but symbols could not be loaded for HipShieldK.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** Type referenced: nt!_KPRCB ***
Probably caused by : mfehidk.sys ( mfehidk+377d7 )
Followup: MachineOwner
Darren Rose

Try it by opening the Cmd prompt as the actual process and passing the Filename and its arguments as the arguments of the Cmd process. If you notice there is a "-C" before the Filename and Arguments in this example. The "-C"
tells the cmd to execute the commands and then close itself. You can also use a "-K" which tells the cmd to execute the commands and keep itself open. Being you are not showing the cmd window you don`t want to keep it opened because the
user can`t close it so, that is why i used "-C".
I don`t have the program so, you can just experiment to see what it does. Maybe you should try using "-K" and show the cmd window by commenting out the CreateNoWindow line so you can see what is in the cmd window while testing.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim filepath As String = """C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\kd"""
Dim args As String = " -z C:\windows\minidump\042414-24632-01.dmp -c ""!analyze –v;q"""
Dim p As New Process
With p.StartInfo
.FileName = "cmd.exe"
.Arguments = "-c " & filepath & args
.UseShellExecute = False
.CreateNoWindow = True
.RedirectStandardOutput = True
End With
p.Start()
TextBox1.Text = p.StandardOutput.ReadToEnd
End Sub
If you say it can`t be done then i`ll try it

Why Do I get different result when Run as Admin to Standard?

Why when Running this script to copy from the "config64" folder (if files exist)(if not copy from "config32") if works correctly when running Batch file normally (copies the config64), but using the exact same line when running
the Batch file as "Run as Administrator" it doesn't work correctly (copies the config32, even though Files do exist config64 folder as they did when I ran it normally and it worked)
>nul 2>nul dir /a-d "Folder\config64\*" /s && (XCOPY "%~dp0Folder\config64\File64.ini" "%ProgramFiles(x86)%\CompanyFolder\ProductFolder\" /y /d) || (XCOPY "%~dp0Folder\config32\File32.ini" "%ProgramFiles(x86)%\CompanyFolder\ProductFolder\" /y /d)
UAC is turned off and I'm the administrator (only user on a standalone PC) running windows 8.1.
Is there a reason or it is a strange bug with Windows 8.1?

A LOT more intellectual than
Frederik Long Who just had no clue himself to not offer an answer. As I've only been looking at this for 2 weeks I think I've come far and you help is much appreciated. Thank you JRV!
You seem to miss the point. Assuming that your problem is caused by a bug can prevent you from finding the real cause. If you had dismissed the bug theory then you might have done some real debugging, e.g. by breaking up your single-line script (which is
hard to comprehend) into easily digestible pieces and adding some debugging code like so:
@echo off
set Target="%ProgramFiles(x86)%\ComapanyFolder\ProductFolder\"
dir /a-d "Folder\config64\*" /s 1>c:\Test.log 2>&1
if %ErrorLevel% EQU 0 (
XCOPY "%~dp0Folder\config64\File64.ini" %Target% /y /d /s 1>>c:\Test.log 2>>&1
) else (
XCOPY "%~dp0Folder\config32\File32.ini" %Target% /y /d /s 1>>c:\Test.log 2>>&1
The log file would have told you quickly what is going on. Furthermore - why should I offer my own solution to your problem when JRV gave you a perfect answer straight away?

Query displays no output when run from sqlplus and from procedure its displ

Hi Guys,
When i ran the below query, it gives me "no rows selected". I made a procedure for the below query by making it a cursor. I just tried to display the total number of records in the procedure. When ran, it showed me some number. I dont understand , why when ran just as a sql query didnt showed any output and when ran as a procedure showing some output.
select cust_account_id
,related_cust_account_id
,object_version_number
,ship_to_flag
,status
from apps.HZ_CUST_ACCT_RELATE re
where
nvl(re.bill_to_flag,'N') ='N'
and re.customer_reciprocal_flag = 'Y'
and re.status = 'A';
declare
cursor c1 is the above query
v_count number;
begin
for rec in c1 loop
v_count := v_count + 1;
end loop;
dbms_output.put_line(' V-Count is:' || v_count);
end;
also tried to print the values of the select when count is 10, it showed some values. But why is it not showing any values when ran just as a sql query.
Help Appreciated
Thanks

Thanks Warren n Dmytro,
Actually, the problem is that table has 1769645 rows of data. I wrote a cursor as defined above in a procedure. With that where condition, it doesnt have any values and so displays no rows. Its taking 5 min to run that query and get me the output.
In the begin, I want to open that cursor using "for rec in c loop" and write one more select statement which is:
begin
for rec in c loop
begin
select count(*) into l_count
from hz_cust_acct_relate_all
where cust_account_id = rec.cust_account_id
and related_cust_account_id = rec.related_cust_account_id;
exception
when others then
dbms_output.put_line(-265676,"SOme err msg");
end;
if l_count = 0 then
now my question is, if my cursor is not returning any rows, then the query written to get l_count will be executed or not. I am passing the cursors cust_account_id and related_cust_account_id values to this query. but that cursor is returning no data.
so what will happen to the code that i wrote. Will it hang or will it continue. Or should i write when no_data_found exception to handle when no rows are returned.
or can in include " exit when c%notfound after for loop". when we use open fetch and close, then we will write this exit when. can we write when using for rec in c loop syntax.
coz when i run that procedure, it jsut hangs like that forever. how to handle it or how to tune it.
help appreciated
thanks

No data loaded when running publish/subscribe sample on Tomcat

I have Tomcat 6.0 running as a .jsp handler with Apache 2.2 using the mod_jk connector. I've configured the samples/ context to be handled via Tomcat. Everything seems to be working fine -- I can access the files and launch .jsp files via my web browser.
But when I try to fire up the DataPush example, I get no results from BlazeDS. Here's the procedure I am using:
1. Start the feed by running http://localhost:8080/samples/testdrive-datapush/startfeed.jsp
2. Run the Flex side: http://localhost:8080/samples/testdrive-datapush/index.html.
3. Press the "Subscribe to 'feed' destination."
Using Firebug within Firefox, I can tell that it's attempting to access a streaming channel. There are two requests:
1) http://localhost:8080/samples/messagebroker/streamingamf
2) http://localhost:8080/samples/messagebroker/streamingamf?command=open&version=1
Request #1 comes back with a plain-text "Loading..." response.
Request #2 returns an error message: The request sent by the client was syntactically incorrect ().
Incase it matters, I have been playing around with the config files in previous tests. For this test, I deleted the samples.war, and samples/ directory from Tomcat. Then I copied the original samples.war back in and restarted Tomcat to redeploy. I would think that this erases all of my configuration settings -- but it does not seem to be doing that (The Data Push/Pull does NOT default to streaming from the Turnkey package, yet when I hit the service again, it always tries to perform streaming first -- as I had told it to do in a previous configuration).
So I have two questions:
1. Why doesn't the example work using streaming?
2. Why aren't my configuration files being reloaded when I restart Tomcat?
TIA
Jonathon

Hi,Alex
Thanks for your advies, But it do not works.
with a Apache Fronting Tomcat, the following config is work:
channel 1 : Hi. Here are answers to your questions.
>
>>>1. Why doesn't the example work using streaming?
>Some proxies buffer the response that is sent back to the client. This causes streaming connections to not work. This is a known issue with the mod_jk connector. Take a look at the following bug for more info.
>http://bugs.adobe.com/jira/browse/BLZ-84
>
>>>2. Why aren't my configuration files being reloaded when I restart Tomcat?
>Did you recompile the sample application after changing the configuration? The configuration information is used by both the server and the client and is compiled into the client. You will need to recompile the client application using the new configuration files if you want your changes to be picked up. Note that is is possible to load the configuration information into the client application at runtime but that's not how the sample applications were built. If you are interested in loading the configuration information at runtime here is a blog posting that gives an example.
>http://coenraets.org/blog/2009/03/externalizing-service-configuration-using-blazeds-and-lc ds/
>Hope that helps.
>-Alex
>

Error when run a jsp page in tomcat

I carefully follow all instruction to install and config j2sdk1.4.2 and Apache Tomcat/5.0.28. After completing, I can run all sample applications about JSP and Servlet in Tomcat manager. I also test my own servlet application and it also works.
But I fail to run a very simple jsp page. Although I already set environment variables such as CATALINA_HOME, JAVA_HOME, CLASSPATH as directed but it seem to not be able to compile jsp page.
( I can compile other java classes in command line. )
Below is the error i receive . This error takes me lots of time to consider.
I look for your help ( please describe as clear as goog ). Thanks a lot.
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
     org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:106)
     org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:935)
     org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

If you are sure you've installed the JDK (as opposed to just a JRE, which doesn't come with the compilation tools that are required to compile JSPs), then your JAVA_HOME is probably set incorrectly. Ensure JAVA_HOME is pointing to the JDK directory, and not to the JRE directory.

Difference between Eclipse and Apache Tomcat?

Can anyone let me know difference between these two? or give me a website link where i can find comparison of the two?I want to work on JAVA+Web services, so what is best bet for me to work with?

eat your pizza then getinto car.or get into car ,
reach the moon and then eat your pizza there.you see
both are usefull somehow.well i asked as i dint know
much about this stuff, so instead of making fun you
could have helped me a bit. no?MAybe you could have just taken the sarcasm as what it was and yould have tried to find out what to use Eclipse and what to use Tomcat for... if you can't tell the terms "deleopment environment" and "servlet container" apart, writing servlets might still be too big a task for your present state of knowledge.

Different behavior when running in Eclipse and on Tomcat

Similar Messages

Maybe you are looking for