Different book for bonus depriciation.

Hi Gurus,
can we set up different book for bonus depriciation or can we create new depriciation along with 1, 10 etc.This is about the law allowed special bonus depriciation asset acquired after 2007 and before 2009.
points will be assigned to right answers.

Hi Shiva,
I will follow following steps and correct me if i am wrong.
1- create new depreciation book with reference to book 10
2- assign assets to new book named special bonus deprecaition.
3- Assign depriciation keys as required per law
4- follow other steps as mentioned in WIKI
5- finally run depreciation using new depriciation area
please confirm it if it is correct so that i can go ahead and do it.
Thanks a lot.

Similar Messages

HT1040 I have previously submitted a book for printing three different times and Apple has told me it's been unreadable. I have previously previewed it before sending and it was perfect. I have followed all other directions. Help.

I have previously submitted a book for printing three different times and Apple has told me each time it's unreadable. I have previously previewed it each time before sending and it was perfect. I have followed all other directions - updated software, all other applications off etc. What am I doing wrong?

Boot into Safemode and Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
If it is good order while in safe mode
LN

Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on different devices.

Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on each different device. When I've tried this, the iOS devices don't seem to respond.

There is no playlist for iBooks, butther eis nothing to preent you from choosing to download specific titles from itunes, or syncing just specific titles to an individual device.

How do I open make iBooks regognize two books created in iBA as different books/files? (iBooks opening separate books as the same file)

I am trying to load two different books created in iBooks Author into iBooks. These books were exported instead of uploaded to the iBookstore, therefore I download them and then open with iBooks on an iPad.
Here is my problem:
When I download a book (Book A), it opens in iBooks correctly. If I download a second book (Book B), instead of opening Book B, iBooks re-opens Book A. This also happens vice-versa if I delete Book A and then upload Book B. Essentially, both books cannot be loaded in iBooks at the same time, and iBooks treats the second download/open attempt as the second book being opened, when in actuality it opens the wrong book.
When I looked at the authoring files, I saw they had the same title listed in the Book Pane in iBA. Even when this title is changed, the books fail to open correctly in iBooks.
Has anyone run into a similar problem? Also, I am wondering if legacy meta data is a possible reason for iBooks to open the same book twice instead of loading and opening the new book? (if this is the case, is there a way that this legacy meta data can be deleted)?
Thanks in advance for your help/support.

Update: Solved.
Either creating a new file or saving the old as a template file & renaming it solved my problem.
Here is the discussion where I found that information:
https://discussions.apple.com/message/20351734#20351734

Looking for a good tutorial or book for 3D composite

Hi, I do editing for 3D animation at work (simple kind) and working along with 2 other 3D modelers.
We recently came down to the conclusion that we need to composite to be able to render our animation.
However, none of us really know how to do 3D composite, including myself.
(I mean we know the simple composite using alpha channels and such... but not to the point to using z-depth or shadow maps... etc..).
I was looking around online and book store to find out if there is any good resources for us to learn. I do not have much luck of it, unfortunately.
I'd like to have our 3D modlers to know how to split to all different layers for a clean composite purpose.... (like for me to use in Shake ). From what I found out, higher end composite, you can split most of the gemoetries its own object IDs, and shadow map/layers, lighting layers... (even they render separetely, it do cast shadow as other objects surrounds it, or refection..) and then composite in one scene.
I believe we create pretty good animation when we rendered them all together in one scene, and now we are up to the point that there are too many geometeries and render farm computers can't handle to render (and they are not lower end compters but they crash when we try to render with not enough memories).
I'm not really looking for having real footage as background and 3D infront .. that kind of composite...
If there is anyone can direct me to a right book? or online website to learn more of this stuff for all of us, I'll be really appriciate it.
Thank you for your time...

These might get you started as well:
http://www.computerarts.co.uk/tutorials/3d_and__animation/boulderdash
http://www.3drender.com/light/compositing/index.html
http://www.3drender.com/jbirn/ea/Ant.html
http://www.ethereal3d.com/Tutorials/Compositing/Compositing.html

What are the different steps for costing related to repetitive manufacturi

Hi PP guys
can any one explain the different steps for costing in repetitive scenario as compared to discrete scenario what is the major difference
thanks
shaik

Dear Michel,
!.In REM scenario Product cost collector is required for all the products for which production booking is
to be done.
2.For each production version created a product cost collector will be created in KKF6N.
3.Without a product cost collector production confirmation can not be done in MFBF.
4.Product cost collector is the cost object in REM scenario.
5.Once after creating material master,BOM,work center,rate routing,aproduction version the next steps
is creating product cost collector.
6.While creating the PCC,the system creates a preliminary cost estimate nothing bu the sum up of the
BOM and dare routing cost.
7.Either a prelimnary cost or a standard cost estimate can be used for doing the production
confirmation in MFBF as per the REM profile assigned.
8.Standard cost estimate can be done in CK40N and this costs gets updated in the material master.
9.For every production confirmation made in MFBF the costs gets accumulated in the respective PCC.
10.the variances can be settled periodically as per the business requirement.
Regards
Mangalraj.S

Need to set-up an older macbook with a different email for my husband to use

I have 2 mac notebooks, 1 older macbook + 1 new macbook air both were set-up with me as the admistrator. I want to set up the older mac book for my husband to use. Right now both computers are set to my email and have me as an administrator - they both maintain all of my settings for example, the Safari bookmarks are the same on both computers. We did download OX Lion on the macbook and my husband does have an Apple ID . What else do I need to do to separate the computers so we each have our own? We share an iTunes account so that is not an issue.

These are the directions of OS 10.7. Some of the details are different on other OS.
1. On your husband's computer, go to System Preferences / Users & Groups and click the padlock to unlock.
(U & G was called Accounts in older OS - not sure what you have on that older Macbook.)
2. Click the + sign. That will give you a new pane.
3. In New Account, select Administrator ( the default is "Standard").
4. Complete all the other fields.
After this is done, close that pane. Now back in U & G, select Login Options.
Set Automatic login to your husband's name.
Restart the computer, and select your husband's name. Check that all is well.
You can now, if you wish, go back to U & G, unlock and select your own name and click the - sign. That will remove your name from the computer.
You will also need to configure Mail for your husband's email with his password. When he first clicks on Mail he will be guided through the setup steps.

Different currencies for multiple line items in a AP invoice?

Hi, Expert,
Is it possible to assign different currencies for multiple line items in a AP invoice?
Eg:
One vendor is supplying raw materials from different regions, and we have to raise one invoice with different currency rate to each items
regards,
Sanju

Hi Sanju,
It is not possible to assign different currencies for multiple line items in a AP invoice.
Try to book the different documents(different correncies for a single vendor in a A/P Invoice).
Regards,
Madhan.

Use of Official Document number in VAT Books for Italy

Dear All,
I would like to share with you a big doubt I have regarding the use of Official Document Number in the VAT Books. This is a requirement for an Italian client.
According to my clients requierement they would like to manage 5 different VAT Books:
1. Sale book (for all finished products sold in Italy, EU and outside EU)
2. Sale book for sundry sales (CAPEX, services, other goods ...)
3. Purchase book (for all the goods bought in Italy and out-side EU and for all the services bought in Italy)
4. EU purchase book (for all the goods and services bought from EU suppliers and for all the services bought from not EU suppliers)
5. EU sale (reverse charge) book (with the same numbers and amounts of the purchase book number 4)
For every VAT Book they want the Officil Document number to be displayed. Not only that, they want the Official Document Number to end in 1 (XXXXXXX1) at the start of every natural Year for EVERY VAT Book, and have sequential numbering with no gaps.
My intention is to use: RFKKITVATM. This is a specific VAT report for Italian Companies. The report selects documents that contain regular VAT and that have been assigned an Official Document number (ODN). You run this report to generate such a list for the current month. It selects documents with an ODN based on the invoice or credit memo posting date. You can create as many layout-variants (one per VAT Book??).
My question is: The VAT Books are based on different VAT Codes. How can we have every single VAT Book to start with an Official Document number ending in 1? The number range will be Document type dependant and not VAT Code dependant.
As per my knowledger, To use Official Document Numbering (ODN) in Italy we have to make a number of settings:
- Activate ODN
- Specify which document types the system is to assign official document numbers to.
- Assign installation-specific function modules to events
- Define Number ranges
Have you faced up a similar requirement? Is this a legal requierement or is my client mixing up with another legal requierement related to this subject: To print a sequential number and the fiscal year on each page of the reportu2019s output list. The System starts the numbering automatically at 1, as it does for each subsequent year.
Many thanks in advance for your help.

Hello All,
Am facing an issue when implementing the ODN solution for Italy. I cannot replicate the ODN in field BKPF-XBLNR_ALT when posting Invoice via MIRO.
1. I have Defined a Document Class per VAT Book
2. I have Assign a Document Class to Document Types (in my example Document Type "RE" to Document class "43". And select "Generate Official Document Number, with date control".
3. I have mantained Number ranges
4. I have Assign the Number ranges to Document Class.
5. In order to transfer the ODN from Billing docs to Accounting docs I have entered the Document Type "RV" at Billing Document Type level.
It all works as expected except for the Accounting documents coming from Logistic Invoice verification - MIRO transaction. Document Type "RE" is used for posting but my field BKPF-XBLNR on Accounting document remains blank.
Is there any additional step am missing?
Thanks in advance.
Regards,

Resolution/other questions in creating books for large books

thinking of getting my first book hard and large 100 pages.
does that mean i have the capacity for atleast 200 photos ( cover back of a page )?
i use 300dpi very high file size images ( 28-60mb) that are not stored on iphoto. I used to make 250-500k jpgs for iphotos so that it would work fast smooth and easy.
If i load my image files into iphoto with the desire to create the largest book, what is the recommended resolution and file size to make the images look their best in the book. I dont understand this whole process because when my images are printed and published in books or magz the requirement is atleast 17.2 MB or higher.
what is the usual file size and resolution that people use in their images to toss into these templates?
thanks
gl

gl:
If you select double sided printing you can have 200 full page photos in the book. More if you use other layouts.
You want to use the largest pixel sized file you have. For a one photo per page layout, full page, you'd want a pixel dimension of 2250 x 3300. That would be equivalent to an 8.5 x 11 inch at 300 dpi. 300 is what the books are printed at.
The frames (picture window) used in the books are sized at a 4:3 ratio. To get your photo to perfectly fill the frame without any cropping, crop your images to 4:3 before putting the in book.
If your photos are a different ratio, they can be used, but some will be cropped from the top and bottom when placed in a frame. You can opt to have the entire image show in the frame but there will be some white space in there also.
My first large book was produced with a camera that gave me images at 1600 x 1200 pixels. Since I didn't have any one photo per page layouts I didn't get any low resolution warning.
The following is a reply I got from Apple regarding book materials and printing quality:
"Thank you for contacting the Apple Print Products Customer Service.
I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
For more information regarding iPhoto 2, please visit the following article:
iPhoto: Color, Black and White Prints Appear Garbled or Distorted
For more information regarding iPhoto 5, please visit the following article:
http://docs.info.apple.com/article.html?artnum=165501
Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
BOOKS
All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
Hardcovers Books
The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
Softcover Books
The softcover books come in three sizes:
- Large 8.5 x 11 inches
- Medium 6 x 8 inches
- Small 2.6 x 3.5 inches
All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
CARDS
All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
CALENDARS
All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
KODAK NEXPRESS 2500 Digital Production Color Press
I hope you find this information helpful in answering questions on the iPhoto forum."
As for file size, iPhoto creates a pdf file of the book for uploading and printing. You can preview the file by creating the pdf file yourself. Just Contol-click on a page but not a photo in the book mode and select the Save Book as PDF option.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.9) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

Book for reports and forms

Could any suggest a very good book for Oracle reports and forms which has all the details of the reports and forms from the fundamentals?

Oracle tutorial..
Although the first two of the following links are for older Forms versions, the concepts are still valid across all Forms versions.
A Tutorial on Oracle9i Forms and Reports
iSelfSchooling - Basic Introduction to Forms
Oracle Forms 10g: Demos, Tips and Techniques
http://www.dotnetspider.com/resources/22433-Triggers.aspx---Different Trigger types
http://sheikyerbouti.developpez.com/index_en/
http://www.slideshare.net/magupta26/oracle-forms-tutorial
http://www2.cs.uh.edu/~ceick/3480/Customized_Oracle_Forms.pdf ---Creating Customized Oracle Forms
http://www.youtube.com/watch?v=0BBiHvHzPYE -- video
Hope this helps,
Oracle Reports Tutorial...
Here few link...
1. http://docs.oracle.com/html/B14364_01/title.htm
2. http://www.scribd.com/doc/3960412/Basic2-Oracle-Reports-10g-Tutorials
Video Tutorial
http://www.youtube.com/watch?v=Fum3MJm5yKU
Hope this helps
If someone's response is helpful or correct, please mark it accordingly.

Can you download a app for the mac book for reading books off book self, can you download a app for the mac book for reading books off book self

can you download a app for the mac book for reading books off book self, can you download a app for the mac book for reading books off book self

Hi...
If you are referring to iBooks on iOS based devices, no, they cannot be read on the Mac OS X. Two different operating systems.

What ppi should each image have PRIOR to importing to Lightroom, for creating a BOOK for Blurb?

I am creating a book for publication with Blurb and all of my images have an exclamation point in the upper right hand corner. Each has a different message as to what the ppi is and what it will print at. All of my images are 300 dpi and 1000px at their largest side. What am I doing wrong? My understanding is for print, 300 dpi is the best HQ resolution. Will I need to resize all in Photoshop and start over and if so, what is the best size for such a project? Thank you.
Amanda Wyn

Your problem is in the 1000px max, not the 300 ppi. 1000px photos are just good enough for small prints. There is no point in trying to print such small files, you need bigger than that, To find out the print dimensions just divide the number of pixels by the print resolution (the usual 300 ppi, but 240 ppi is usually enough for a quality print) . So you'll get a little more than 3.3 in if printed at 300 ppi, 4.1 in @ 240 ppi.

Can we run Bonus depriciation in 2009

Hi gurus,
our client did not run special bonus depriciation becasue system was not configured. Can we move those changes in 2009 and run special depriciation now.
we are at 5.0 and EA-FIN is activited. full point will be assigned to quick and correct answer. please if some has same scenerio and if had resolved that.
thanks
chander

See for bonus depreciation the wiki
/people/nathan.genez/blog/2008/03/06/calculating-bonus-depreciation-for-2008-fixed-assets-part-1
/people/nathan.genez/blog/2008/03/25/calculating-bonus-depreciation-for-2008-fixed-assets-part-2

How to set different Icons for Jtreenode

How to set different Icons for Jtreenode,i want to set icons for jtreenode,not only for leaf,open,closeicon,i hope that each node has a different icon.Thanks!

you need to check for the node value within a renderer, then assign an icon based on what you expect to get back.
check out this page. http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html

Different book for bonus depriciation.

Similar Messages

Maybe you are looking for