Different currency in conditions

Hi The SO. has been created for ZHP1 & PNTP, however there are 2 differnet currencies been picked up EURO & GBP. The amount picked up is the same for ZHP1 & PNTP, can you please advice the amounts for both the conditions are the same. Please refer to the file attached below. Thanks in advance.

It seems like your document currency is GBP and it's all about currency exchange rate.
As 1 EUR = 0.80 GBP or 1 GBP = 1.26 EUR
your 15.29 EUR = 12.18 GBP
Obviously, 15.29 EUR <> 15.29 GBP
To check the applicable, exchange rate, select the condition type ZHP1 in your pricing and click on details button.
Thanks, JP

Similar Messages

Register 2 purchase contidions with different currency

Hello All,
In our project we are facing to a big issue with different currencies in the PO conditions.
An example of the situation in the PO is the following (but should be different currencies, not always the same currency for the same condition):
    - the condition for price is in GBP
    - the condition for transport is in USD
    - the condition for "custom" is in EUR
For each condition, we have a different vendor. We work in France, so we have also the PAM activated.
Our requirement:
    - we need to keep the original amount in currency for the GR (so in this case to have 3 postings due to the currency in the header of FI posting) because due to the big amount of currencies in the company, we need to follow exchange rate at the end of the month
    - we need to enter the invoice in the currency of the condition
Today when we have a GR, the system, even if we have 3 vendors, create only one global posting by translating the different condition to the PO currency (here in GBP). In fact, when the PO is created, the condition is immediatly converted.
Does anyone have a solution to do that ? Apparently in IS-OIL solution, this kind of posting is possible. But no information is available in OSS about this point.
Thanks & regards

hi iswari
you can acheieve this prodided you have maintained the corresponding currencny in the Schedulling agreement, kinldy maintain the curren in ME32k and assing the agreement while converting purchase requisition to purchase order .Since you are creating the order the price will be in the currency you have maintained in customizing.
youcan also enter the price in MO, just double click the operation and in external tab page select the FULL SERVICE button in the bottom of the screen, anew screeen will appear where you will enter the overall limit and expected value
regards
thyagarajan

Show report in different currency depending on user parameter

hi all,
i'm trying to show my report in different currency, depending on users given parameter.
i hold my account balance in USD based. User should select one parameter, in which currency they want to see their account balance. (e.g. EURO, GBP ...) and depending on their selection, i want to convert USD based info into chosen currency, by fetching field from currency table and making some calculation.
also i want to include in report currency($, Â£ ...) accordingly ().
how can i achieve this, has somebody any suggestion to me?
thanks in advance.
bogi.

hi,
i think i need to explain my problem more detailed. anyone who has suggestion, please help me.
i have 3 tables account, times and currency.
- times table has time_key, date, day_of_week fields.
- account table has - account_balance and time_key_FK fields.
- currency table has currency_type, amount, time_key_FK fields.
1. i have function decode(:Currency,'USD',account_balance,'EURO',--here i want to replace my calculation CALC1---)
CALC1- this calculation need to some calculation like this: account_balance * (fetched field from this sql)(select amount from currency, account where currency.currency_type='EURO' and account.time_key_FK=currency.time_key_FK)
i tried to do this, but discoverer plus doesn't let me make condition and calc. i'm very confused.
2. after i achieve this query, somehow i want to display on worksheet on which currency is it based. can i get parameter value, and show this value as in column heading?
tnx!!!

Different Vendor in condition type

Hi,
   We are using different vendor in condition type for import purchase order as given.
Ordering Vendor - 800000
Custom   Vendor - 900000 in condition type
Freight    Vendor - 700000 in condition type
While i am doing Goods Receipt, In the Freight tab only ordering and freight vendor is showing. And at the time of MIRO all three vendor are showing for selection.
Question: So is there any restriction for condition type. And if i change vendor at condition type after MIGO what will be effect on MIRO.
We are using GR Base Invoice verification.
Thanks in Advance.
Ashish Panchal

Hi, For Import PO, you need to follow the following standard process for all Indian scenario,
>>You should have different Pricing Procedure, with all the Duties conditions defined.
>>Import Vendor, with import currency
>>Different Document type for import PO, in the PO for the Customs conditions give the Customs Vendor code.
>>In PO tax code to be Zero or Nil %, & u201CGR based IVu201D tick to be removed from Invoice tab
>>Do MIRO for Customs Vendor before doing MIGO
>>After doing MIRO do GR for the Item (in MIGO you will get popup for the MIRO document done, excise details from this is populated in to the PO )
>>Just refer to below link for Import purchase case for some more understanding,
Excise invoice not getting converted into INR from USD for an IMPORT PO

Service Po with different currencies

Hi Experts,
As per the requirement i want to do the Service PO. The scenario of the service PO is the each item in the service must be of the different type of the currency. For Ex 1) the service type is Contract of a building. in which it consists of the different kinds of the services like civil work, Engineering, Drawing & so on... the Civil work must be of one kind of currency(GBP), Engineering - USD, & Drawing - shelings.. & So on.. Can anybody tell me how we can proceed with making a PO of this kind...
Thanks & Regards
Raman T S

Hello Raman,
you could enter the different currencies in the condition detail screen for each service line: mark the service line, go to conditions, for condition PRSX the currency field is an entry field, here you can add a currency which is different from the PO header currency.
Regards,
Edit

Contracts with different Currencies

Hi SAP experts,is it possible to create a Contract with different currencies in line items for a vendor???.Thank you for any advice.

No, the currency is a header field (EKKO-WAERS).
It is possible to enter conditions with a different currency, but this will then be converted into the "PO currency"

Two different currencies in single Service PO

Dear All,
Can I create a service PO with two different currencies ?
I want one item to be paid in EUR and one in INR. I have separted these two items at item overvivew level.
I have tried vendor sub range also.
Please help.
Regards,
Rakesh

I think you can define/update individual conditions in whatever currency you like (provided exchange ratres are maintained) but the overall PO will be in a single currency. (I'm not currently logged on) Try updating an individual Condition or even PO item in your trial system.
I'm also think when you process the invoice you can define the (single) currency. Provided (important) the invoices are presented separately and the exchange rates do not move significantly you will be OK.
It's a bit messy and not a good method but you can do it.
Ignore sub-ranges, not relevant to what you want to do.
Regards,
Nick

PO with different currencies

hi,
pls guide in this isuue
How to Create the PO for Different Currencies ?
rgds

Hi,
While creating the Purchase orders the Order Currency will get defaulted from Vendor master, If you want different currency enter the same in Delivery / Invoice Tab at header data before entering the vendor.
In conditions tab of items details , for fixed value, Quantity based conditions you can change the currency different fro order currency
Thanks & Regards,
Sridhar.G

Unable to clear vendor with different currency being posted

Dear Experts,
One of our vendor's Invoice billed in currency USD, several payments has been posted with different currency according to our Bank currencies. Full payment has been made to the balance of ZERO, but we still unable to clear this vendor account. Any expert can help me how to clear the above mentioned vendor.
Regards/Lisa

Hi,
Please check whether the customisation for exchange difference accounting has been done. If so then
T Code is F-44 or F-04
Either use Local Currency. : In this case if there is any exchange rate difference between the invoice and payment date the difference will be posted to exchange diff account.
Or Use the Doc Currency : In this case you can provide the exchange rate in the transaction so that you will not get any exchange rate difference.
Hope this solves your issue.
Regards
MPI

Report to show different currencies

Dear Experts,
Currently my report shows value in local currency.
In my report I need to show the PO Value, GR Value etc in local, order and group currency. While investigating the underline Cube and DSO's, I find the following:
1. There is no 0Curtype object in the DSO or corresponding values coming from Datasources.
2. Each record has an Exchange Rate attached to it.
3. All the PO values are converted to local currency. Say a PO is ordered in CAD and the local currency is USD. Now in the transformation the PO Value is converted to local currency using the program PERFORM LOC_CURR_CONVERT which uses the Process Keys, Order_Val, Doc_Date, Order_Curr, Loc_Curr, Exchg_Rate.
4. This is done for other key figures too.
Questions:
1. Which the best way to approach this requirement and how to achieve the objective of showing the report in local, order and group currency? Do I need to make changes in the design if the cube, dso or only at report level and how? pls provide detail steps.
2. In the DSO or Cube's I do not see any Group Currency mentioned? What is Group Currency and how do I achieve it?
Thanks,
Jainu

Hi Jainu
There is no need to change the Cube or DSO's design. Firstly Group currency is usually the global reporting currency used by your client. Usually it is USD if your client is based out of North America. Secondly you need to define different currency conversion types. For that go to RSCUR transaction and define a currency translation type.
- It can be AS02 (Month Average Rate) or AS01(Month End FX Rate) or M (Daily exchange rate) type based on your requirement.
- These values will be available in the TCURR table in your system and will be transferred from SAP R/3 to your BI system.
- In the Currency Translation type definition choose Exchange Rate type in the exchange Rate tab.
- In the currency tab choose "Source currency from Data Record, Target urrency as "Fixed Target Currency" and choose USD in the F4 help.
In the Time Ref tab choose Fixed Time Ref and Current Date.
Activate and move this translation type from Dev to Production in a transport. In order to do a currency conversion using this translation type in your query, choose your key figure and in the conversions tab, choose the conversion type and the Target Currency will automatically get populated as USD. When you run this query after these settings it will return your key figure values in USD. Remember that in the TCUR table your conversions should be maintained for all currencies to USD for this to happen and your READ_EXCHANGE_RATE function module should be defined.
This is a generic approach and does not need any cube or DSO change.

Amount of a sum in a different currency

looking for function or other way to check the amount of a sum in a different currency for a certain exchange type according the currencies and exchange rate definition.
Thanks

Hi,
You can use CONVERT_TO_LOCAL_CURRENCY function.
Regards,
Eli

Stock Posting List - Negative Value when Different Currency in PO

Hi experts,
We would like your help on the following scenario.
A Purchase Goods Receipt PO and a Purchase Invoice are added in SAP 9.0, on the same date, in a different currency from the system's currency; system's is Euro and Purchase documents are added in JPY (Japanese xen), i.e. 300 JPY. When checking the "Stock Posting List" report for a number of goods that were purchased with the above documents, the report presents the line of the Goods Receipt PO with the value of 270 JPY, and the line of the Purchase Invoice with a negative value, i.e.-15 Euro.
Has anyone faced the same issue?
Thank you in advance.
Kind Regards,
Vassilis Korolis

Both queries have the default value of "Only Posted Values for Navigation".
As I was looking at this, I did realize the following though.
Remember, I mentioned that my zcurrency_mand field has a Reference Characteristic of 0currency.
Query 1: The key figure that is being converted is tied to 0currency in the back end. (this is the query that works).
Query 2: The key figure that is being converted is tied to 0inv_curr in the back end.
Both of the currency conversions are using zcurrency_mand. Should query 2 be using a new variable similar to zcurrency_mand, but with a Reference Characteristic of 0inv_curr?
If the answer is yes, I tried creating ZINV_CURR_MAND with Reference Characteristic of 0inv_curr, but am getting the following error when I try to save the changes to Query 2
[E117(BRAIN)] Errors: Variable ZINV_CURR_MAND2 is not permitted for the target currency.
Thanks,
Jennifer

PO and GRN different currency

HI,
I havale done with USD currency and done GRN but GRN has came to EUR currency.
My PO is USD currency and GRN is EUR cuurency.
I want clarification and solution why its happening with different currency.
Thanks

Hi,
When you go to MIGO -FI Document click on display currency tab there there are three options
Document currency
Local Currency
Group Currency
System will show currency according to these settings
Thanks
Diwakar

Import format for two amount columns in different currencies

Hello,
I am working on FDM 11.1.1.3 and will be getting the trial balance containing amounts in two currencies (both local and USD). I need to load data in both the currencies. The extract has two columns for the amount rather than having two different rows for different currencies. Any ideas how to define this format and how to load data. We are not using the translation logic and hence the amounts in both currencies are required.
Thanks for your help in advance.

Hi Tony,
Thanks a lot for the input. Any idea, how should I go about doing this else if you have any documentation, let me know. Also, what are the cons of doing it this way over requesting the customer to get the file with amounts in different rows than in different columns

How to clear open items posted in different currencies

Hi ,
Invoice and payment receipt docs were posted in different currencies, please guide how can we clear these open items.
Thanks in advance.......
Mistra

Hi,
Create Three GL like following
1. Forex gain/loss - Realized
2. Forex gain/loss - Unrealized
3. Balance sheet adjustment
After creating this GLs goto OB09 and enter your chart of accounts then press new entry. If you are clearing vendor then put Vendor reconciliation in G/L Account.
Exchange rates difference realized
Loss - Forex gain/loss - Realized
Gain - Forex gain/loss - Realized
Valuation
Val. loss1 - Forex gain/loss - Unrealized
Val. loss2 - Forex gain/loss - Unrealized
Bal sheet adj1 - Balance sheet adjustment
Save the entry, configuration is similar for all except G/L account you maintain in top. For customr it will be customer reconciliation account.
Regards,
Chintan Joshi.

Different currency in conditions

Similar Messages

Maybe you are looking for